1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include <dt-bindings/input/input.h>
5#include "tegra114.dtsi"
6
7/ {
8	model = "Tegra Note 7";
9	compatible = "nvidia,tn7", "nvidia,tegra114";
10
11	chosen {
12		/* TN7's bootloader's arguments need to be overridden */
13		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
14		/* TN7's bootloader will place initrd at this address */
15		linux,initrd-start = <0x82000000>;
16		linux,initrd-end = <0x82800000>;
17	};
18
19	aliases {
20		serial0 = &uartd;
21	};
22
23	firmware {
24		trusted-foundations {
25			compatible = "tlm,trusted-foundations";
26			tlm,version-major = <2>;
27			tlm,version-minor = <8>;
28		};
29	};
30
31	memory@80000000 {
32		/* memory >= 0x37e00000 is reserved for firmware usage */
33		reg = <0x80000000 0x37e00000>;
34	};
35
36	host1x@50000000 {
37		dsi@54300000 {
38			status = "okay";
39
40			avdd-dsi-csi-supply = <&vdd_1v2_ap>;
41
42			panel@0 {
43				compatible = "lg,ld070wx3-sl01";
44				reg = <0>;
45
46				power-supply = <&vdd_lcd>;
47				backlight = <&backlight>;
48			};
49		};
50	};
51
52	serial@70006300 {
53		status = "okay";
54	};
55
56	pwm@7000a000 {
57		status = "okay";
58	};
59
60	i2c@7000d000 {
61		status = "okay";
62		clock-frequency = <400000>;
63
64		palmas: pmic@58 {
65			compatible = "ti,tps65913", "ti,palmas";
66			reg = <0x58>;
67			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
68
69			#interrupt-cells = <2>;
70			interrupt-controller;
71
72			ti,system-power-controller;
73
74			palmas_gpio: gpio {
75				compatible = "ti,palmas-gpio";
76				gpio-controller;
77				#gpio-cells = <2>;
78			};
79
80			pmic {
81				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
82
83				ldoln-in-supply = <&vdd_smps10_out2>;
84
85				regulators {
86					smps123 {
87						regulator-name = "vd-cpu";
88						regulator-min-microvolt = <1000000>;
89						regulator-max-microvolt = <1000000>;
90						regulator-always-on;
91						regulator-boot-on;
92					};
93
94					smps45 {
95						regulator-name = "vd-soc";
96						regulator-min-microvolt = <1100000>;
97						regulator-max-microvolt = <1100000>;
98						regulator-always-on;
99						regulator-boot-on;
100					};
101
102					smps6 {
103						regulator-name = "va-lcd-hv";
104						regulator-min-microvolt = <3000000>;
105						regulator-max-microvolt = <3000000>;
106						regulator-always-on;
107						regulator-boot-on;
108					};
109
110					smps7 {
111						regulator-name = "vd-ddr";
112						regulator-min-microvolt = <1350000>;
113						regulator-max-microvolt = <1350000>;
114						regulator-always-on;
115						regulator-boot-on;
116					};
117
118					vdd_1v8: smps8 {
119						regulator-name = "vs-pmu-1v8";
120						regulator-min-microvolt = <1800000>;
121						regulator-max-microvolt = <1800000>;
122						regulator-always-on;
123						regulator-boot-on;
124					};
125
126					vdd_2v9_sys: smps9 {
127						regulator-name = "vs-sys-2v9";
128						regulator-min-microvolt = <2900000>;
129						regulator-max-microvolt = <2900000>;
130						regulator-always-on;
131						regulator-boot-on;
132					};
133
134					vdd_smps10_out1: smps10_out1 {
135						regulator-name = "vd-smps10-out1";
136						regulator-min-microvolt = <5000000>;
137						regulator-max-microvolt = <5000000>;
138						regulator-always-on;
139						regulator-boot-on;
140					};
141
142					vdd_smps10_out2: smps10_out2 {
143						regulator-name = "vd-smps10-out2";
144						regulator-min-microvolt = <5000000>;
145						regulator-max-microvolt = <5000000>;
146						regulator-always-on;
147						regulator-boot-on;
148					};
149
150					ldo1 {
151						regulator-name = "va-pllx";
152						regulator-min-microvolt = <1050000>;
153						regulator-max-microvolt = <1050000>;
154						regulator-always-on;
155						regulator-boot-on;
156					};
157
158					vdd_1v2_ap: ldo2 {
159						regulator-name = "va-ap-1v2";
160						regulator-min-microvolt = <1200000>;
161						regulator-max-microvolt = <1200000>;
162						regulator-always-on;
163						regulator-boot-on;
164					};
165
166					ldo3 {
167						regulator-name = "vd-fuse";
168						regulator-min-microvolt = <1800000>;
169						regulator-max-microvolt = <1800000>;
170						regulator-always-on;
171						regulator-boot-on;
172					};
173
174					ldo4 {
175						regulator-name = "vd-ts-hv";
176						regulator-min-microvolt = <3200000>;
177						regulator-max-microvolt = <3200000>;
178						regulator-always-on;
179						regulator-boot-on;
180					};
181
182					ldo5 {
183						regulator-name = "va-cam2-hv";
184						regulator-min-microvolt = <2700000>;
185						regulator-max-microvolt = <2700000>;
186					};
187
188					ldo6 {
189						regulator-name = "va-sns-hv";
190						regulator-min-microvolt = <2850000>;
191						regulator-max-microvolt = <2850000>;
192					};
193
194					ldo7 {
195						regulator-name = "va-cam1-hv";
196						regulator-min-microvolt = <2700000>;
197						regulator-max-microvolt = <2700000>;
198					};
199
200					ldo8 {
201						regulator-name = "va-ap-rtc";
202						regulator-min-microvolt = <1100000>;
203						regulator-max-microvolt = <1100000>;
204						ti,enable-ldo8-tracking;
205						regulator-always-on;
206						regulator-boot-on;
207					};
208
209					ldo9 {
210						regulator-name = "vi-sdcard";
211						regulator-min-microvolt = <2900000>;
212						regulator-max-microvolt = <2900000>;
213					};
214
215					ldousb {
216						regulator-name = "avdd-usb";
217						regulator-min-microvolt = <3300000>;
218						regulator-max-microvolt = <3300000>;
219						regulator-always-on;
220						regulator-boot-on;
221					};
222
223					ldoln {
224						regulator-name = "va-hdmi";
225						regulator-min-microvolt = <3300000>;
226						regulator-max-microvolt = <3300000>;
227					};
228				};
229			};
230
231			rtc {
232				compatible = "ti,palmas-rtc";
233				interrupt-parent = <&palmas>;
234				interrupts = <8 0>;
235			};
236
237		};
238	};
239
240	pmc@7000e400 {
241		nvidia,invert-interrupt;
242	};
243
244	/* eMMC */
245	mmc@78000600 {
246		status = "okay";
247		bus-width = <8>;
248		non-removable;
249	};
250
251	usb@7d000000 {
252		status = "okay";
253	};
254
255	usb-phy@7d000000 {
256		status = "okay";
257		nvidia,xcvr-setup = <7>;
258		nvidia,xcvr-lsfslew = <2>;
259		nvidia,xcvr-lsrslew = <2>;
260		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
261		/* Should be changed to "otg" once we have vbus_supply */
262		/* As of now, USB devices need to be powered externally */
263		dr_mode = "host";
264	};
265
266	backlight: backlight {
267		compatible = "pwm-backlight";
268		pwms = <&pwm 1 40000>;
269
270		brightness-levels = <0 4 8 16 32 64 128 255>;
271		default-brightness-level = <6>;
272
273		power-supply = <&lcd_bl_en>;
274	};
275
276	clk32k_in: clock-32k {
277		compatible = "fixed-clock";
278		clock-frequency = <32768>;
279		#clock-cells = <0>;
280	};
281
282	gpio-keys {
283		compatible = "gpio-keys";
284
285		key-power {
286			label = "Power";
287			gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
288			linux,code = <KEY_POWER>;
289			wakeup-source;
290		};
291
292		key-volume-down {
293			label = "Volume Down";
294			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
295			linux,code = <KEY_VOLUMEDOWN>;
296		};
297
298		key-volume-up {
299			label = "Volume Up";
300			gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
301			linux,code = <KEY_VOLUMEUP>;
302		};
303	};
304
305	/* FIXME: output of BQ24192 */
306	vs_sys: regulator-vs {
307		compatible = "regulator-fixed";
308		regulator-name = "VS_SYS";
309		regulator-min-microvolt = <4200000>;
310		regulator-max-microvolt = <4200000>;
311		regulator-always-on;
312		regulator-boot-on;
313	};
314
315	lcd_bl_en: regulator-lcden {
316		compatible = "regulator-fixed";
317		regulator-name = "VDD_LCD_BL";
318		regulator-min-microvolt = <16500000>;
319		regulator-max-microvolt = <16500000>;
320		gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
321		enable-active-high;
322		vin-supply = <&vs_sys>;
323		regulator-boot-on;
324	};
325
326	vdd_lcd: regulator-lcd {
327		compatible = "regulator-fixed";
328		regulator-name = "VD_LCD_1V8";
329		regulator-min-microvolt = <1800000>;
330		regulator-max-microvolt = <1800000>;
331		gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
332		enable-active-high;
333		vin-supply = <&vdd_1v8>;
334		regulator-boot-on;
335	};
336};
337