1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC
4 *                applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC
5 *
6 *  Copyright (C) 2013 Atmel,
7 *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
8 */
9
10#include <dt-bindings/dma/at91.h>
11#include <dt-bindings/pinctrl/at91.h>
12#include <dt-bindings/interrupt-controller/irq.h>
13#include <dt-bindings/gpio/gpio.h>
14#include <dt-bindings/clock/at91.h>
15#include <dt-bindings/mfd/at91-usart.h>
16
17/ {
18	#address-cells = <1>;
19	#size-cells = <1>;
20	model = "Atmel SAMA5D3 family SoC";
21	compatible = "atmel,sama5d3", "atmel,sama5";
22	interrupt-parent = <&aic>;
23
24	aliases {
25		serial0 = &dbgu;
26		serial1 = &usart0;
27		serial2 = &usart1;
28		serial3 = &usart2;
29		serial4 = &usart3;
30		serial5 = &uart0;
31		gpio0 = &pioA;
32		gpio1 = &pioB;
33		gpio2 = &pioC;
34		gpio3 = &pioD;
35		gpio4 = &pioE;
36		tcb0 = &tcb0;
37		i2c0 = &i2c0;
38		i2c1 = &i2c1;
39		i2c2 = &i2c2;
40		ssc0 = &ssc0;
41		ssc1 = &ssc1;
42		pwm0 = &pwm0;
43	};
44	cpus {
45		#address-cells = <1>;
46		#size-cells = <0>;
47		cpu@0 {
48			device_type = "cpu";
49			compatible = "arm,cortex-a5";
50			reg = <0x0>;
51		};
52	};
53
54	pmu {
55		compatible = "arm,cortex-a5-pmu";
56		interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
57	};
58
59	memory@20000000 {
60		device_type = "memory";
61		reg = <0x20000000 0x8000000>;
62	};
63
64	clocks {
65		slow_xtal: slow_xtal {
66			compatible = "fixed-clock";
67			#clock-cells = <0>;
68			clock-frequency = <0>;
69		};
70
71		main_xtal: main_xtal {
72			compatible = "fixed-clock";
73			#clock-cells = <0>;
74			clock-frequency = <0>;
75		};
76
77		adc_op_clk: adc_op_clk{
78			compatible = "fixed-clock";
79			#clock-cells = <0>;
80			clock-frequency = <1000000>;
81		};
82	};
83
84	sram: sram@300000 {
85		compatible = "mmio-sram";
86		reg = <0x00300000 0x20000>;
87		#address-cells = <1>;
88		#size-cells = <1>;
89		ranges = <0 0x00300000 0x20000>;
90	};
91
92	ahb {
93		compatible = "simple-bus";
94		#address-cells = <1>;
95		#size-cells = <1>;
96		ranges;
97
98		apb {
99			compatible = "simple-bus";
100			#address-cells = <1>;
101			#size-cells = <1>;
102			ranges;
103
104			mmc0: mmc@f0000000 {
105				compatible = "atmel,hsmci";
106				reg = <0xf0000000 0x600>;
107				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
108				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(0)>;
109				dma-names = "rxtx";
110				pinctrl-names = "default";
111				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
112				status = "disabled";
113				#address-cells = <1>;
114				#size-cells = <0>;
115				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
116				clock-names = "mci_clk";
117			};
118
119			spi0: spi@f0004000 {
120				#address-cells = <1>;
121				#size-cells = <0>;
122				compatible = "atmel,at91rm9200-spi";
123				reg = <0xf0004000 0x100>;
124				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
125				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(1)>,
126				       <&dma0 2 AT91_DMA_CFG_PER_ID(2)>;
127				dma-names = "tx", "rx";
128				pinctrl-names = "default";
129				pinctrl-0 = <&pinctrl_spi0>;
130				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
131				clock-names = "spi_clk";
132				status = "disabled";
133			};
134
135			ssc0: ssc@f0008000 {
136				compatible = "atmel,at91sam9g45-ssc";
137				reg = <0xf0008000 0x4000>;
138				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>;
139				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>,
140				       <&dma0 2 AT91_DMA_CFG_PER_ID(14)>;
141				dma-names = "tx", "rx";
142				pinctrl-names = "default";
143				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
144				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
145				clock-names = "pclk";
146				status = "disabled";
147			};
148
149			tcb0: timer@f0010000 {
150				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
151				#address-cells = <1>;
152				#size-cells = <0>;
153				reg = <0xf0010000 0x100>;
154				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
155				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
156				clock-names = "t0_clk", "slow_clk";
157			};
158
159			i2c0: i2c@f0014000 {
160				compatible = "atmel,at91sam9x5-i2c";
161				reg = <0xf0014000 0x4000>;
162				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 6>;
163				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(7)>,
164				       <&dma0 2 AT91_DMA_CFG_PER_ID(8)>;
165				dma-names = "tx", "rx";
166				pinctrl-names = "default", "gpio";
167				pinctrl-0 = <&pinctrl_i2c0>;
168				pinctrl-1 = <&pinctrl_i2c0_gpio>;
169				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
170				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
171				#address-cells = <1>;
172				#size-cells = <0>;
173				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
174				status = "disabled";
175			};
176
177			i2c1: i2c@f0018000 {
178				compatible = "atmel,at91sam9x5-i2c";
179				reg = <0xf0018000 0x4000>;
180				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 6>;
181				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(9)>,
182				       <&dma0 2 AT91_DMA_CFG_PER_ID(10)>;
183				dma-names = "tx", "rx";
184				pinctrl-names = "default", "gpio";
185				pinctrl-0 = <&pinctrl_i2c1>;
186				pinctrl-1 = <&pinctrl_i2c1_gpio>;
187				sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
188				scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
189				#address-cells = <1>;
190				#size-cells = <0>;
191				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
192				status = "disabled";
193			};
194
195			usart0: serial@f001c000 {
196				compatible = "atmel,at91sam9260-usart";
197				reg = <0xf001c000 0x100>;
198				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
199				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
200				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
201				       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
202				dma-names = "tx", "rx";
203				pinctrl-names = "default";
204				pinctrl-0 = <&pinctrl_usart0>;
205				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
206				clock-names = "usart";
207				status = "disabled";
208			};
209
210			usart1: serial@f0020000 {
211				compatible = "atmel,at91sam9260-usart";
212				reg = <0xf0020000 0x100>;
213				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
214				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 5>;
215				dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(5)>,
216				       <&dma0 2 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
217				dma-names = "tx", "rx";
218				pinctrl-names = "default";
219				pinctrl-0 = <&pinctrl_usart1>;
220				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
221				clock-names = "usart";
222				status = "disabled";
223			};
224
225			uart0: serial@f0024000 {
226				compatible = "atmel,at91sam9260-usart";
227				reg = <0xf0024000 0x100>;
228				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
229				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
230				pinctrl-names = "default";
231				pinctrl-0 = <&pinctrl_uart0>;
232				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
233				clock-names = "usart";
234				status = "disabled";
235			};
236
237			pwm0: pwm@f002c000 {
238				compatible = "atmel,sama5d3-pwm";
239				reg = <0xf002c000 0x300>;
240				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
241				#pwm-cells = <3>;
242				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
243				status = "disabled";
244			};
245
246			isi: isi@f0034000 {
247				compatible = "atmel,at91sam9g45-isi";
248				reg = <0xf0034000 0x4000>;
249				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
250				pinctrl-names = "default";
251				pinctrl-0 = <&pinctrl_isi_data_0_7>;
252				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
253				clock-names = "isi_clk";
254				status = "disabled";
255				port {
256					#address-cells = <1>;
257					#size-cells = <0>;
258				};
259			};
260
261			sfr: sfr@f0038000 {
262				compatible = "atmel,sama5d3-sfr", "syscon";
263				reg = <0xf0038000 0x60>;
264			};
265
266			mmc1: mmc@f8000000 {
267				compatible = "atmel,hsmci";
268				reg = <0xf8000000 0x600>;
269				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 0>;
270				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(0)>;
271				dma-names = "rxtx";
272				pinctrl-names = "default";
273				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
274				status = "disabled";
275				#address-cells = <1>;
276				#size-cells = <0>;
277				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
278				clock-names = "mci_clk";
279			};
280
281			spi1: spi@f8008000 {
282				#address-cells = <1>;
283				#size-cells = <0>;
284				compatible = "atmel,at91rm9200-spi";
285				reg = <0xf8008000 0x100>;
286				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
287				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(15)>,
288				       <&dma1 2 AT91_DMA_CFG_PER_ID(16)>;
289				dma-names = "tx", "rx";
290				pinctrl-names = "default";
291				pinctrl-0 = <&pinctrl_spi1>;
292				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
293				clock-names = "spi_clk";
294				status = "disabled";
295			};
296
297			ssc1: ssc@f800c000 {
298				compatible = "atmel,at91sam9g45-ssc";
299				reg = <0xf800c000 0x4000>;
300				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>;
301				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>,
302				       <&dma1 2 AT91_DMA_CFG_PER_ID(4)>;
303				dma-names = "tx", "rx";
304				pinctrl-names = "default";
305				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
306				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
307				clock-names = "pclk";
308				status = "disabled";
309			};
310
311			adc0: adc@f8018000 {
312				compatible = "atmel,sama5d3-adc";
313				reg = <0xf8018000 0x100>;
314				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 5>;
315				pinctrl-names = "default";
316				pinctrl-0 = <
317					&pinctrl_adc0_adtrg
318					&pinctrl_adc0_ad0
319					&pinctrl_adc0_ad1
320					&pinctrl_adc0_ad2
321					&pinctrl_adc0_ad3
322					&pinctrl_adc0_ad4
323					&pinctrl_adc0_ad5
324					&pinctrl_adc0_ad6
325					&pinctrl_adc0_ad7
326					&pinctrl_adc0_ad8
327					&pinctrl_adc0_ad9
328					&pinctrl_adc0_ad10
329					&pinctrl_adc0_ad11
330					>;
331				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
332					 <&adc_op_clk>;
333				clock-names = "adc_clk", "adc_op_clk";
334				atmel,adc-channels-used = <0xfff>;
335				atmel,adc-startup-time = <40>;
336				atmel,adc-use-external-triggers;
337				atmel,adc-vref = <3000>;
338				atmel,adc-sample-hold-time = <11>;
339				status = "disabled";
340			};
341
342			i2c2: i2c@f801c000 {
343				compatible = "atmel,at91sam9x5-i2c";
344				reg = <0xf801c000 0x4000>;
345				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 6>;
346				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>,
347				       <&dma1 2 AT91_DMA_CFG_PER_ID(12)>;
348				dma-names = "tx", "rx";
349				pinctrl-names = "default", "gpio";
350				pinctrl-0 = <&pinctrl_i2c2>;
351				pinctrl-1 = <&pinctrl_i2c2_gpio>;
352				sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
353				scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
354				#address-cells = <1>;
355				#size-cells = <0>;
356				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
357				status = "disabled";
358			};
359
360			usart2: serial@f8020000 {
361				compatible = "atmel,at91sam9260-usart";
362				reg = <0xf8020000 0x100>;
363				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
364				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
365				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(7)>,
366				       <&dma1 2 (AT91_DMA_CFG_PER_ID(8) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
367				dma-names = "tx", "rx";
368				pinctrl-names = "default";
369				pinctrl-0 = <&pinctrl_usart2>;
370				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
371				clock-names = "usart";
372				status = "disabled";
373			};
374
375			usart3: serial@f8024000 {
376				compatible = "atmel,at91sam9260-usart";
377				reg = <0xf8024000 0x100>;
378				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
379				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
380				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(9)>,
381				       <&dma1 2 (AT91_DMA_CFG_PER_ID(10) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
382				dma-names = "tx", "rx";
383				pinctrl-names = "default";
384				pinctrl-0 = <&pinctrl_usart3>;
385				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
386				clock-names = "usart";
387				status = "disabled";
388			};
389
390			sha: crypto@f8034000 {
391				compatible = "atmel,at91sam9g46-sha";
392				reg = <0xf8034000 0x100>;
393				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
394				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
395				dma-names = "tx";
396				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
397				clock-names = "sha_clk";
398			};
399
400			aes: crypto@f8038000 {
401				compatible = "atmel,at91sam9g46-aes";
402				reg = <0xf8038000 0x100>;
403				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
404				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
405				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
406				dma-names = "tx", "rx";
407				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
408				clock-names = "aes_clk";
409			};
410
411			tdes: crypto@f803c000 {
412				compatible = "atmel,at91sam9g46-tdes";
413				reg = <0xf803c000 0x100>;
414				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
415				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
416				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
417				dma-names = "tx", "rx";
418				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
419				clock-names = "tdes_clk";
420			};
421
422			trng@f8040000 {
423				compatible = "atmel,at91sam9g45-trng";
424				reg = <0xf8040000 0x100>;
425				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
426				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
427			};
428
429			hsmc: hsmc@ffffc000 {
430				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
431				reg = <0xffffc000 0x1000>;
432				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
433				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
434				#address-cells = <1>;
435				#size-cells = <1>;
436				ranges;
437
438				pmecc: ecc-engine@ffffc070 {
439					compatible = "atmel,at91sam9g45-pmecc";
440					reg = <0xffffc070 0x490>,
441					      <0xffffc500 0x100>;
442				};
443			};
444
445			dma0: dma-controller@ffffe600 {
446				compatible = "atmel,at91sam9g45-dma";
447				reg = <0xffffe600 0x200>;
448				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
449				#dma-cells = <2>;
450				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
451				clock-names = "dma_clk";
452			};
453
454			dma1: dma-controller@ffffe800 {
455				compatible = "atmel,at91sam9g45-dma";
456				reg = <0xffffe800 0x200>;
457				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
458				#dma-cells = <2>;
459				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
460				clock-names = "dma_clk";
461			};
462
463			ramc0: ramc@ffffea00 {
464				compatible = "atmel,sama5d3-ddramc";
465				reg = <0xffffea00 0x200>;
466				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
467				clock-names = "ddrck", "mpddr";
468			};
469
470			dbgu: serial@ffffee00 {
471				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
472				reg = <0xffffee00 0x200>;
473				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
474				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
475				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
476				       <&dma1 2 (AT91_DMA_CFG_PER_ID(14) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
477				dma-names = "tx", "rx";
478				pinctrl-names = "default";
479				pinctrl-0 = <&pinctrl_dbgu>;
480				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
481				clock-names = "usart";
482				status = "disabled";
483			};
484
485			aic: interrupt-controller@fffff000 {
486				#interrupt-cells = <3>;
487				compatible = "atmel,sama5d3-aic";
488				interrupt-controller;
489				reg = <0xfffff000 0x200>;
490				atmel,external-irqs = <47>;
491			};
492
493			pinctrl: pinctrl@fffff200 {
494				#address-cells = <1>;
495				#size-cells = <1>;
496				compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
497				ranges = <0xfffff200 0xfffff200 0xa00>;
498				atmel,mux-mask = <
499					/*   A          B          C  */
500					0xffffffff 0xc0fc0000 0xc0ff0000	/* pioA */
501					0xffffffff 0x0ff8ffff 0x00000000	/* pioB */
502					0xffffffff 0xbc00f1ff 0x7c00fc00	/* pioC */
503					0xffffffff 0xc001c0e0 0x0001c1e0	/* pioD */
504					0xffffffff 0xbf9f8000 0x18000000	/* pioE */
505					>;
506
507				/* shared pinctrl settings */
508				adc0 {
509					pinctrl_adc0_adtrg: adc0_adtrg {
510						atmel,pins =
511							<AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD19 periph A ADTRG */
512					};
513					pinctrl_adc0_ad0: adc0_ad0 {
514						atmel,pins =
515							<AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD20 periph A AD0 */
516					};
517					pinctrl_adc0_ad1: adc0_ad1 {
518						atmel,pins =
519							<AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A AD1 */
520					};
521					pinctrl_adc0_ad2: adc0_ad2 {
522						atmel,pins =
523							<AT91_PIOD 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD22 periph A AD2 */
524					};
525					pinctrl_adc0_ad3: adc0_ad3 {
526						atmel,pins =
527							<AT91_PIOD 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD23 periph A AD3 */
528					};
529					pinctrl_adc0_ad4: adc0_ad4 {
530						atmel,pins =
531							<AT91_PIOD 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD24 periph A AD4 */
532					};
533					pinctrl_adc0_ad5: adc0_ad5 {
534						atmel,pins =
535							<AT91_PIOD 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD25 periph A AD5 */
536					};
537					pinctrl_adc0_ad6: adc0_ad6 {
538						atmel,pins =
539							<AT91_PIOD 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD26 periph A AD6 */
540					};
541					pinctrl_adc0_ad7: adc0_ad7 {
542						atmel,pins =
543							<AT91_PIOD 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD27 periph A AD7 */
544					};
545					pinctrl_adc0_ad8: adc0_ad8 {
546						atmel,pins =
547							<AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD28 periph A AD8 */
548					};
549					pinctrl_adc0_ad9: adc0_ad9 {
550						atmel,pins =
551							<AT91_PIOD 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD29 periph A AD9 */
552					};
553					pinctrl_adc0_ad10: adc0_ad10 {
554						atmel,pins =
555							<AT91_PIOD 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD30 periph A AD10, conflicts with PCK0 */
556					};
557					pinctrl_adc0_ad11: adc0_ad11 {
558						atmel,pins =
559							<AT91_PIOD 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD31 periph A AD11, conflicts with PCK1 */
560					};
561				};
562
563				dbgu {
564					pinctrl_dbgu: dbgu-0 {
565						atmel,pins =
566							<AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
567							 AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
568					};
569				};
570
571				ebi {
572					pinctrl_ebi_addr: ebi-addr-0 {
573						atmel,pins =
574							<AT91_PIOE 1 AT91_PERIPH_A AT91_PINCTRL_NONE
575							 AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE
576							 AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE
577							 AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE
578							 AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE
579							 AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE
580							 AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE
581							 AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE
582							 AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE
583							 AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE
584							 AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE
585							 AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE
586							 AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE
587							 AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE
588							 AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE
589							 AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE
590							 AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE
591							 AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE
592							 AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE
593							 AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE
594							 AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
595							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE
596							 AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
597					};
598
599					pinctrl_ebi_nand_addr: ebi-addr-1 {
600						atmel,pins =
601							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE
602							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
603					};
604
605					pinctrl_ebi_cs0: ebi-cs0-0 {
606						atmel,pins =
607							<AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
608					};
609
610					pinctrl_ebi_cs1: ebi-cs1-0 {
611						atmel,pins =
612							<AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
613					};
614
615					pinctrl_ebi_cs2: ebi-cs2-0 {
616						atmel,pins =
617							<AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
618					};
619
620					pinctrl_ebi_nwait: ebi-nwait-0 {
621						atmel,pins =
622							<AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
623					};
624
625					pinctrl_ebi_nwr1_nbs1: ebi-nwr1-nbs1-0 {
626						atmel,pins =
627							<AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
628					};
629				};
630
631				i2c0 {
632					pinctrl_i2c0: i2c0-0 {
633						atmel,pins =
634							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A TWD0 pin, conflicts with URXD1, ISI_VSYNC */
635							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA31 periph A TWCK0 pin, conflicts with UTXD1, ISI_HSYNC */
636					};
637
638					pinctrl_i2c0_gpio: i2c0-gpio {
639						atmel,pins =
640							<AT91_PIOA 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
641							 AT91_PIOA 31 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
642					};
643				};
644
645				i2c1 {
646					pinctrl_i2c1: i2c1-0 {
647						atmel,pins =
648							<AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PC26 periph B TWD1 pin, conflicts with SPI1_NPCS1, ISI_D11 */
649							 AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC27 periph B TWCK1 pin, conflicts with SPI1_NPCS2, ISI_D10 */
650					};
651
652					pinctrl_i2c1_gpio: i2c1-gpio {
653						atmel,pins =
654							<AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
655							 AT91_PIOC 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
656					};
657				};
658
659				i2c2 {
660					pinctrl_i2c2: i2c2-0 {
661						atmel,pins =
662							<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE	/* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */
663							 AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */
664					};
665
666					pinctrl_i2c2_gpio: i2c2-gpio {
667						atmel,pins =
668							<AT91_PIOA 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
669							 AT91_PIOA 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
670					};
671				};
672
673				isi {
674					pinctrl_isi_data_0_7: isi-0-data-0-7 {
675						atmel,pins =
676							<AT91_PIOA 16 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA16 periph C ISI_D0, conflicts with LCDDAT16 */
677							 AT91_PIOA 17 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA17 periph C ISI_D1, conflicts with LCDDAT17 */
678							 AT91_PIOA 18 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA18 periph C ISI_D2, conflicts with LCDDAT18, TWD2 */
679							 AT91_PIOA 19 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA19 periph C ISI_D3, conflicts with LCDDAT19, TWCK2 */
680							 AT91_PIOA 20 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA20 periph C ISI_D4, conflicts with LCDDAT20, PWMH0 */
681							 AT91_PIOA 21 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA21 periph C ISI_D5, conflicts with LCDDAT21, PWML0 */
682							 AT91_PIOA 22 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA22 periph C ISI_D6, conflicts with LCDDAT22, PWMH1 */
683							 AT91_PIOA 23 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA23 periph C ISI_D7, conflicts with LCDDAT23, PWML1 */
684							 AT91_PIOC 30 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC30 periph C ISI_PCK, conflicts with UTXD0 */
685							 AT91_PIOA 31 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PA31 periph C ISI_HSYNC, conflicts with TWCK0, UTXD1 */
686							 AT91_PIOA 30 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PA30 periph C ISI_VSYNC, conflicts with TWD0, URXD1 */
687					};
688
689					pinctrl_isi_data_8_9: isi-0-data-8-9 {
690						atmel,pins =
691							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC29 periph C ISI_PD8, conflicts with URXD0, PWMFI2 */
692							 AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC28 periph C ISI_PD9, conflicts with SPI1_NPCS3, PWMFI0 */
693					};
694
695					pinctrl_isi_data_10_11: isi-0-data-10-11 {
696						atmel,pins =
697							<AT91_PIOC 27 AT91_PERIPH_C AT91_PINCTRL_NONE	/* PC27 periph C ISI_PD10, conflicts with SPI1_NPCS2, TWCK1 */
698							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC26 periph C ISI_PD11, conflicts with SPI1_NPCS1, TWD1 */
699					};
700				};
701
702				mmc0 {
703					pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 {
704						atmel,pins =
705							<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A MCI0_CK */
706							 AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A MCI0_CDA with pullup */
707							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD1 periph A MCI0_DA0 with pullup */
708					};
709					pinctrl_mmc0_dat1_3: mmc0_dat1_3 {
710						atmel,pins =
711							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A MCI0_DA1 with pullup */
712							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD3 periph A MCI0_DA2 with pullup */
713							 AT91_PIOD 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD4 periph A MCI0_DA3 with pullup */
714					};
715					pinctrl_mmc0_dat4_7: mmc0_dat4_7 {
716						atmel,pins =
717							<AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */
718							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */
719							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD7 periph A MCI0_DA6 with pullup, conflicts with TCLK0, PWMH3 */
720							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */
721					};
722				};
723
724				mmc1 {
725					pinctrl_mmc1_clk_cmd_dat0: mmc1_clk_cmd_dat0 {
726						atmel,pins =
727							<AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB24 periph A MCI1_CK, conflicts with GRX5 */
728							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A MCI1_CDA with pullup, conflicts with GTX4 */
729							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB20 periph A MCI1_DA0 with pullup, conflicts with GTX5 */
730					};
731					pinctrl_mmc1_dat1_3: mmc1_dat1_3 {
732						atmel,pins =
733							<AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB21 periph A MCI1_DA1 with pullup, conflicts with GTX6 */
734							 AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB22 periph A MCI1_DA2 with pullup, conflicts with GTX7 */
735							 AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB23 periph A MCI1_DA3 with pullup, conflicts with GRX4 */
736					};
737				};
738
739				nand0 {
740					pinctrl_nand0_ale_cle: nand0_ale_cle-0 {
741						atmel,pins =
742							<AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PE21 periph A with pullup */
743							 AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PE22 periph A with pullup */
744					};
745				};
746
747				pwm0 {
748					pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
749						atmel,pins =
750							<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D4 and LCDDAT20 */
751					};
752					pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
753						atmel,pins =
754							<AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX0 */
755					};
756					pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
757						atmel,pins =
758							<AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D5 and LCDDAT21 */
759					};
760					pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
761						atmel,pins =
762							<AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTX1 */
763					};
764
765					pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
766						atmel,pins =
767							<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D6 and LCDDAT22 */
768					};
769					pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
770						atmel,pins =
771							<AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX0 */
772					};
773					pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
774						atmel,pins =
775							<AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with G125CKO and RTS1 */
776					};
777					pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
778						atmel,pins =
779							<AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with ISI_D7 and LCDDAT23 */
780					};
781					pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
782						atmel,pins =
783							<AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRX1 */
784					};
785					pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
786						atmel,pins =
787							<AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with IRQ */
788					};
789
790					pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
791						atmel,pins =
792							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXCK */
793					};
794					pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
795						atmel,pins =
796							<AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA4 and TIOA0 */
797					};
798					pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
799						atmel,pins =
800							<AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GTXEN */
801					};
802					pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
803						atmel,pins =
804							<AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA5 and TIOB0 */
805					};
806
807					pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
808						atmel,pins =
809							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXDV */
810					};
811					pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
812						atmel,pins =
813							<AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA6 and TCLK0 */
814					};
815					pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
816						atmel,pins =
817							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with GRXER */
818					};
819					pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
820						atmel,pins =
821							<AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* conflicts with MCI0_DA7 */
822					};
823				};
824
825				spi0 {
826					pinctrl_spi0: spi0-0 {
827						atmel,pins =
828							<AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A SPI0_MISO pin */
829							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A SPI0_MOSI pin */
830							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD12 periph A SPI0_SPCK pin */
831					};
832				};
833
834				spi1 {
835					pinctrl_spi1: spi1-0 {
836						atmel,pins =
837							<AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC22 periph A SPI1_MISO pin */
838							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC23 periph A SPI1_MOSI pin */
839							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC24 periph A SPI1_SPCK pin */
840					};
841				};
842
843				ssc0 {
844					pinctrl_ssc0_tx: ssc0_tx {
845						atmel,pins =
846							<AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC16 periph A TK0 */
847							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC17 periph A TF0 */
848							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC18 periph A TD0 */
849					};
850
851					pinctrl_ssc0_rx: ssc0_rx {
852						atmel,pins =
853							<AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC19 periph A RK0 */
854							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC20 periph A RF0 */
855							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PC21 periph A RD0 */
856					};
857				};
858
859				ssc1 {
860					pinctrl_ssc1_tx: ssc1_tx {
861						atmel,pins =
862							<AT91_PIOB 2 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB2 periph B TK1, conflicts with GTX2 */
863							 AT91_PIOB 3 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB3 periph B TF1, conflicts with GTX3 */
864							 AT91_PIOB 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB6 periph B TD1, conflicts with TD1 */
865					};
866
867					pinctrl_ssc1_rx: ssc1_rx {
868						atmel,pins =
869							<AT91_PIOB 7 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB7 periph B RK1, conflicts with EREFCK */
870							 AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PB10 periph B RF1, conflicts with GTXER */
871							 AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB11 periph B RD1, conflicts with GRXCK */
872					};
873				};
874
875				uart0 {
876					pinctrl_uart0: uart0-0 {
877						atmel,pins =
878							<AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* conflicts with PWMFI2, ISI_D8 */
879							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* conflicts with ISI_PCK */
880					};
881				};
882
883				uart1 {
884					pinctrl_uart1: uart1-0 {
885						atmel,pins =
886							<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with TWD0, ISI_VSYNC */
887							 AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with TWCK0, ISI_HSYNC */
888					};
889				};
890
891				usart0 {
892					pinctrl_usart0: usart0-0 {
893						atmel,pins =
894							<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
895							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
896					};
897
898					pinctrl_usart0_rts_cts: usart0_rts_cts-0 {
899						atmel,pins =
900							<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A, conflicts with SPI0_NPCS2, CANTX0 */
901							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD16 periph A, conflicts with SPI0_NPCS3, PWMFI3 */
902					};
903				};
904
905				usart1 {
906					pinctrl_usart1: usart1-0 {
907						atmel,pins =
908							<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
909							 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
910					};
911
912					pinctrl_usart1_rts_cts: usart1_rts_cts-0 {
913						atmel,pins =
914							<AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB26 periph A, conflicts with GRX7 */
915							 AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB27 periph A, conflicts with G125CKO */
916					};
917				};
918
919				usart2 {
920					pinctrl_usart2: usart2-0 {
921						atmel,pins =
922							<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A25 */
923							 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts NCS0 */
924					};
925
926					pinctrl_usart2_rts_cts: usart2_rts_cts-0 {
927						atmel,pins =
928							<AT91_PIOE 23 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE23 periph B, conflicts with A23 */
929							 AT91_PIOE 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE24 periph B, conflicts with A24 */
930					};
931				};
932
933				usart3 {
934					pinctrl_usart3: usart3-0 {
935						atmel,pins =
936							<AT91_PIOE 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* conflicts with A18 */
937							 AT91_PIOE 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* conflicts with A19 */
938					};
939
940					pinctrl_usart3_rts_cts: usart3_rts_cts-0 {
941						atmel,pins =
942							<AT91_PIOE 16 AT91_PERIPH_B AT91_PINCTRL_NONE	/* PE16 periph B, conflicts with A16 */
943							 AT91_PIOE 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PE17 periph B, conflicts with A17 */
944					};
945				};
946
947
948				pioA: gpio@fffff200 {
949					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
950					reg = <0xfffff200 0x100>;
951					interrupts = <6 IRQ_TYPE_LEVEL_HIGH 1>;
952					#gpio-cells = <2>;
953					gpio-controller;
954					interrupt-controller;
955					#interrupt-cells = <2>;
956					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
957				};
958
959				pioB: gpio@fffff400 {
960					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
961					reg = <0xfffff400 0x100>;
962					interrupts = <7 IRQ_TYPE_LEVEL_HIGH 1>;
963					#gpio-cells = <2>;
964					gpio-controller;
965					interrupt-controller;
966					#interrupt-cells = <2>;
967					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
968				};
969
970				pioC: gpio@fffff600 {
971					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
972					reg = <0xfffff600 0x100>;
973					interrupts = <8 IRQ_TYPE_LEVEL_HIGH 1>;
974					#gpio-cells = <2>;
975					gpio-controller;
976					interrupt-controller;
977					#interrupt-cells = <2>;
978					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
979				};
980
981				pioD: gpio@fffff800 {
982					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
983					reg = <0xfffff800 0x100>;
984					interrupts = <9 IRQ_TYPE_LEVEL_HIGH 1>;
985					#gpio-cells = <2>;
986					gpio-controller;
987					interrupt-controller;
988					#interrupt-cells = <2>;
989					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
990				};
991
992				pioE: gpio@fffffa00 {
993					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
994					reg = <0xfffffa00 0x100>;
995					interrupts = <10 IRQ_TYPE_LEVEL_HIGH 1>;
996					#gpio-cells = <2>;
997					gpio-controller;
998					interrupt-controller;
999					#interrupt-cells = <2>;
1000					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
1001				};
1002			};
1003
1004			pmc: clock-controller@fffffc00 {
1005				compatible = "atmel,sama5d3-pmc", "syscon";
1006				reg = <0xfffffc00 0x120>;
1007				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1008				#clock-cells = <2>;
1009				clocks = <&clk32k>, <&main_xtal>;
1010				clock-names = "slow_clk", "main_xtal";
1011			};
1012
1013			reset_controller: reset-controller@fffffe00 {
1014				compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
1015				reg = <0xfffffe00 0x10>;
1016				clocks = <&clk32k>;
1017			};
1018
1019			shutdown_controller: poweroff@fffffe10 {
1020				compatible = "atmel,at91sam9x5-shdwc";
1021				reg = <0xfffffe10 0x10>;
1022				clocks = <&clk32k>;
1023			};
1024
1025			pit: timer@fffffe30 {
1026				compatible = "atmel,at91sam9260-pit";
1027				reg = <0xfffffe30 0xf>;
1028				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
1029				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
1030			};
1031
1032			watchdog: watchdog@fffffe40 {
1033				compatible = "atmel,at91sam9260-wdt";
1034				reg = <0xfffffe40 0x10>;
1035				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
1036				clocks = <&clk32k>;
1037				atmel,watchdog-type = "hardware";
1038				atmel,reset-type = "all";
1039				atmel,dbg-halt;
1040				status = "disabled";
1041			};
1042
1043			clk32k: clock-controller@fffffe50 {
1044				compatible = "atmel,sama5d3-sckc";
1045				reg = <0xfffffe50 0x4>;
1046				clocks = <&slow_xtal>;
1047				#clock-cells = <0>;
1048			};
1049
1050			rtc@fffffeb0 {
1051				compatible = "atmel,at91rm9200-rtc";
1052				reg = <0xfffffeb0 0x30>;
1053				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
1054				clocks = <&clk32k>;
1055			};
1056		};
1057
1058		nfc_sram: sram@200000 {
1059			compatible = "mmio-sram";
1060			no-memory-wc;
1061			reg = <0x200000 0x2400>;
1062			#address-cells = <1>;
1063			#size-cells = <1>;
1064			ranges = <0 0x200000 0x2400>;
1065		};
1066
1067		usb0: gadget@500000 {
1068			compatible = "atmel,sama5d3-udc";
1069			reg = <0x00500000 0x100000
1070			       0xf8030000 0x4000>;
1071			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
1072			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
1073			clock-names = "pclk", "hclk";
1074			status = "disabled";
1075		};
1076
1077		usb1: ohci@600000 {
1078			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1079			reg = <0x00600000 0x100000>;
1080			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
1081			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
1082			clock-names = "ohci_clk", "hclk", "uhpck";
1083			status = "disabled";
1084		};
1085
1086		usb2: ehci@700000 {
1087			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
1088			reg = <0x00700000 0x100000>;
1089			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
1090			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
1091			clock-names = "usb_clk", "ehci_clk";
1092			status = "disabled";
1093		};
1094
1095		ebi: ebi@10000000 {
1096			compatible = "atmel,sama5d3-ebi";
1097			#address-cells = <2>;
1098			#size-cells = <1>;
1099			atmel,smc = <&hsmc>;
1100			reg = <0x10000000 0x10000000
1101			       0x40000000 0x30000000>;
1102			ranges = <0x0 0x0 0x10000000 0x10000000
1103				  0x1 0x0 0x40000000 0x10000000
1104				  0x2 0x0 0x50000000 0x10000000
1105				  0x3 0x0 0x60000000 0x10000000>;
1106			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
1107			status = "disabled";
1108
1109			nand_controller: nand-controller {
1110				compatible = "atmel,sama5d3-nand-controller";
1111				atmel,nfc-sram = <&nfc_sram>;
1112				atmel,nfc-io = <&nfc_io>;
1113				ecc-engine = <&pmecc>;
1114				#address-cells = <2>;
1115				#size-cells = <1>;
1116				ranges;
1117				status = "disabled";
1118			};
1119		};
1120
1121		nfc_io: nfc-io@70000000 {
1122			compatible = "atmel,sama5d3-nfc-io", "syscon";
1123			reg = <0x70000000 0x8000000>;
1124		};
1125	};
1126};
1127