1*724ba675SRob Herring// SPDX-License-Identifier: GPL-2.0-only
2*724ba675SRob Herring/*
3*724ba675SRob Herring * ethernut5.dts - Device Tree file for Ethernut 5 board
4*724ba675SRob Herring *
5*724ba675SRob Herring * Copyright (C) 2012 egnite GmbH <info@egnite.de>
6*724ba675SRob Herring */
7*724ba675SRob Herring/dts-v1/;
8*724ba675SRob Herring#include "at91sam9xe.dtsi"
9*724ba675SRob Herring
10*724ba675SRob Herring/ {
11*724ba675SRob Herring	model = "Ethernut 5";
12*724ba675SRob Herring	compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
13*724ba675SRob Herring
14*724ba675SRob Herring	chosen {
15*724ba675SRob Herring		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
16*724ba675SRob Herring	};
17*724ba675SRob Herring
18*724ba675SRob Herring	memory@20000000 {
19*724ba675SRob Herring		reg = <0x20000000 0x08000000>;
20*724ba675SRob Herring	};
21*724ba675SRob Herring
22*724ba675SRob Herring	clocks {
23*724ba675SRob Herring		slow_xtal {
24*724ba675SRob Herring			clock-frequency = <32768>;
25*724ba675SRob Herring		};
26*724ba675SRob Herring
27*724ba675SRob Herring		main_xtal {
28*724ba675SRob Herring			clock-frequency = <18432000>;
29*724ba675SRob Herring		};
30*724ba675SRob Herring	};
31*724ba675SRob Herring
32*724ba675SRob Herring	ahb {
33*724ba675SRob Herring		apb {
34*724ba675SRob Herring			dbgu: serial@fffff200 {
35*724ba675SRob Herring				status = "okay";
36*724ba675SRob Herring			};
37*724ba675SRob Herring
38*724ba675SRob Herring			tcb0: timer@fffa0000 {
39*724ba675SRob Herring				timer@0 {
40*724ba675SRob Herring					compatible = "atmel,tcb-timer";
41*724ba675SRob Herring					reg = <0>, <1>;
42*724ba675SRob Herring				};
43*724ba675SRob Herring
44*724ba675SRob Herring				timer@2 {
45*724ba675SRob Herring					compatible = "atmel,tcb-timer";
46*724ba675SRob Herring					reg = <2>;
47*724ba675SRob Herring				};
48*724ba675SRob Herring			};
49*724ba675SRob Herring
50*724ba675SRob Herring			usart0: serial@fffb0000 {
51*724ba675SRob Herring				status = "okay";
52*724ba675SRob Herring			};
53*724ba675SRob Herring
54*724ba675SRob Herring			usart1: serial@fffb4000 {
55*724ba675SRob Herring				status = "okay";
56*724ba675SRob Herring			};
57*724ba675SRob Herring
58*724ba675SRob Herring			macb0: ethernet@fffc4000 {
59*724ba675SRob Herring				phy-mode = "rmii";
60*724ba675SRob Herring				status = "okay";
61*724ba675SRob Herring			};
62*724ba675SRob Herring
63*724ba675SRob Herring			usb1: gadget@fffa4000 {
64*724ba675SRob Herring				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
65*724ba675SRob Herring				status = "okay";
66*724ba675SRob Herring			};
67*724ba675SRob Herring		};
68*724ba675SRob Herring
69*724ba675SRob Herring		ebi: ebi@10000000 {
70*724ba675SRob Herring			status = "okay";
71*724ba675SRob Herring
72*724ba675SRob Herring			nand_controller: nand-controller {
73*724ba675SRob Herring				status = "okay";
74*724ba675SRob Herring				pinctrl-0 = <&pinctrl_nand_cs>;
75*724ba675SRob Herring				pinctrl-names = "default";
76*724ba675SRob Herring
77*724ba675SRob Herring				nand: nand@3 {
78*724ba675SRob Herring					reg = <0x3 0x0 0x800000>;
79*724ba675SRob Herring					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
80*724ba675SRob Herring					nand-bus-width = <8>;
81*724ba675SRob Herring					nand-ecc-mode = "soft";
82*724ba675SRob Herring					nand-on-flash-bbt;
83*724ba675SRob Herring					label = "atmel_nand";
84*724ba675SRob Herring
85*724ba675SRob Herring					partitions {
86*724ba675SRob Herring						compatible = "fixed-partitions";
87*724ba675SRob Herring						#address-cells = <1>;
88*724ba675SRob Herring						#size-cells = <1>;
89*724ba675SRob Herring
90*724ba675SRob Herring						root@0 {
91*724ba675SRob Herring							label = "root";
92*724ba675SRob Herring							reg = <0x0 0x08000000>;
93*724ba675SRob Herring						};
94*724ba675SRob Herring
95*724ba675SRob Herring						data@20000 {
96*724ba675SRob Herring							label = "data";
97*724ba675SRob Herring							reg = <0x08000000 0x38000000>;
98*724ba675SRob Herring						};
99*724ba675SRob Herring					};
100*724ba675SRob Herring				};
101*724ba675SRob Herring			};
102*724ba675SRob Herring		};
103*724ba675SRob Herring
104*724ba675SRob Herring		usb0: ohci@500000 {
105*724ba675SRob Herring			num-ports = <2>;
106*724ba675SRob Herring			status = "okay";
107*724ba675SRob Herring		};
108*724ba675SRob Herring	};
109*724ba675SRob Herring
110*724ba675SRob Herring	i2c-gpio-0 {
111*724ba675SRob Herring		status = "okay";
112*724ba675SRob Herring
113*724ba675SRob Herring		pcf8563@50 {
114*724ba675SRob Herring			compatible = "nxp,pcf8563";
115*724ba675SRob Herring			reg = <0x51>;
116*724ba675SRob Herring		};
117*724ba675SRob Herring	};
118*724ba675SRob Herring};
119