1*724ba675SRob Herring// SPDX-License-Identifier: GPL-2.0-or-later 2*724ba675SRob Herring/* 3*724ba675SRob Herring * at91-cosino_mega2560.dts - Device Tree file for Cosino board with 4*724ba675SRob Herring * Mega 2560 extension 5*724ba675SRob Herring * 6*724ba675SRob Herring * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it> 7*724ba675SRob Herring * HCE Engineering 8*724ba675SRob Herring * 9*724ba675SRob Herring * Derived from at91sam9g35ek.dts by: 10*724ba675SRob Herring * Copyright (C) 2012 Atmel, 11*724ba675SRob Herring * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> 12*724ba675SRob Herring */ 13*724ba675SRob Herring 14*724ba675SRob Herring/dts-v1/; 15*724ba675SRob Herring#include "at91-cosino.dtsi" 16*724ba675SRob Herring 17*724ba675SRob Herring/ { 18*724ba675SRob Herring model = "HCE Cosino Mega 2560"; 19*724ba675SRob Herring compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9"; 20*724ba675SRob Herring}; 21*724ba675SRob Herring 22*724ba675SRob Herring&adc0 { 23*724ba675SRob Herring atmel,adc-ts-wires = <4>; 24*724ba675SRob Herring atmel,adc-ts-pressure-threshold = <10000>; 25*724ba675SRob Herring status = "okay"; 26*724ba675SRob Herring}; 27*724ba675SRob Herring 28*724ba675SRob Herring&macb0 { 29*724ba675SRob Herring phy-mode = "rmii"; 30*724ba675SRob Herring status = "okay"; 31*724ba675SRob Herring}; 32*724ba675SRob Herring 33*724ba675SRob Herring&mmc1 { 34*724ba675SRob Herring pinctrl-0 = < 35*724ba675SRob Herring &pinctrl_mmc1_slot0_clk_cmd_dat0 36*724ba675SRob Herring &pinctrl_mmc1_slot0_dat1_3>; 37*724ba675SRob Herring pinctrl-names = "default"; 38*724ba675SRob Herring status = "okay"; 39*724ba675SRob Herring 40*724ba675SRob Herring slot@0 { 41*724ba675SRob Herring reg = <0>; 42*724ba675SRob Herring bus-width = <4>; 43*724ba675SRob Herring non-removable; 44*724ba675SRob Herring }; 45*724ba675SRob Herring}; 46*724ba675SRob Herring 47*724ba675SRob Herring&rtc { 48*724ba675SRob Herring status = "okay"; 49*724ba675SRob Herring}; 50*724ba675SRob Herring 51*724ba675SRob Herring&usart1 { 52*724ba675SRob Herring status = "okay"; 53*724ba675SRob Herring}; 54*724ba675SRob Herring 55*724ba675SRob Herring&usart2 { 56*724ba675SRob Herring status = "okay"; 57*724ba675SRob Herring}; 58*724ba675SRob Herring 59*724ba675SRob Herring&usb0 { 60*724ba675SRob Herring num-ports = <3>; 61*724ba675SRob Herring atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */ 62*724ba675SRob Herring &pioD 19 GPIO_ACTIVE_LOW 63*724ba675SRob Herring &pioD 20 GPIO_ACTIVE_LOW 64*724ba675SRob Herring >; 65*724ba675SRob Herring status = "okay"; 66*724ba675SRob Herring}; 67*724ba675SRob Herring 68*724ba675SRob Herring&usb1 { 69*724ba675SRob Herring status = "okay"; 70*724ba675SRob Herring}; 71*724ba675SRob Herring 72*724ba675SRob Herring&usb2 { 73*724ba675SRob Herring atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; 74*724ba675SRob Herring status = "okay"; 75*724ba675SRob Herring}; 76