1// SPDX-License-Identifier: GPL-2.0
2/ {
3	mbus@f1000000 {
4		pciec: pcie@82000000 {
5			compatible = "marvell,kirkwood-pcie";
6			status = "disabled";
7			device_type = "pci";
8
9			#address-cells = <3>;
10			#size-cells = <2>;
11
12			bus-range = <0x00 0xff>;
13
14			ranges =
15			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
16				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
17				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
18
19			pcie0: pcie@1,0 {
20				device_type = "pci";
21				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
22				reg = <0x0800 0 0 0 0>;
23				#address-cells = <3>;
24				#size-cells = <2>;
25				#interrupt-cells = <1>;
26				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
27					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
28				bus-range = <0x00 0xff>;
29				interrupt-names = "intx", "error";
30				interrupts = <9>, <44>;
31				interrupt-map-mask = <0 0 0 7>;
32				interrupt-map = <0 0 0 1 &pcie_intc 0>,
33						<0 0 0 2 &pcie_intc 1>,
34						<0 0 0 3 &pcie_intc 2>,
35						<0 0 0 4 &pcie_intc 3>;
36				marvell,pcie-port = <0>;
37				marvell,pcie-lane = <0>;
38				clocks = <&gate_clk 2>;
39				status = "disabled";
40
41				pcie_intc: interrupt-controller {
42					interrupt-controller;
43					#interrupt-cells = <1>;
44				};
45			};
46		};
47	};
48
49	ocp@f1000000 {
50		pinctrl: pin-controller@10000 {
51			compatible = "marvell,88f6192-pinctrl";
52
53			pmx_sata0: pmx-sata0 {
54				marvell,pins = "mpp5", "mpp21", "mpp23";
55				marvell,function = "sata0";
56			};
57			pmx_sata1: pmx-sata1 {
58				marvell,pins = "mpp4", "mpp20", "mpp22";
59				marvell,function = "sata1";
60			};
61			pmx_sdio: pmx-sdio {
62				marvell,pins = "mpp12", "mpp13", "mpp14",
63					       "mpp15", "mpp16", "mpp17";
64				marvell,function = "sdio";
65			};
66		};
67
68		rtc: rtc@10300 {
69			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
70			reg = <0x10300 0x20>;
71			interrupts = <53>;
72			clocks = <&gate_clk 7>;
73		};
74
75		sata: sata@80000 {
76			compatible = "marvell,orion-sata";
77			reg = <0x80000 0x5000>;
78			interrupts = <21>;
79			clocks = <&gate_clk 14>, <&gate_clk 15>;
80			clock-names = "0", "1";
81			phys = <&sata_phy0>, <&sata_phy1>;
82			phy-names = "port0", "port1";
83			status = "disabled";
84		};
85
86		sdio: mvsdio@90000 {
87			compatible = "marvell,orion-sdio";
88			reg = <0x90000 0x200>;
89			interrupts = <28>;
90			clocks = <&gate_clk 4>;
91			bus-width = <4>;
92			cap-sdio-irq;
93			cap-sd-highspeed;
94			cap-mmc-highspeed;
95			status = "disabled";
96		};
97	};
98};
99