1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Device Tree file for the Linksys WRT3200ACM (Rango)
4 *
5 * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
6 */
7
8/dts-v1/;
9#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include "armada-385-linksys.dtsi"
12
13/ {
14	model = "Linksys WRT3200ACM";
15	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
16		     "marvell,armada380";
17};
18
19&expander0 {
20	wan_amber@0 {
21		label = "rango:amber:wan";
22		reg = <0x0>;
23	};
24
25	wan_white@1 {
26		label = "rango:white:wan";
27		reg = <0x1>;
28	};
29
30	usb2@5 {
31		label = "rango:white:usb2";
32		reg = <0x5>;
33	};
34
35	usb3_1@6 {
36		label = "rango:white:usb3_1";
37		reg = <0x6>;
38	};
39
40	usb3_2@7 {
41		label = "rango:white:usb3_2";
42		reg = <0x7>;
43	};
44
45	wps_white@8 {
46		label = "rango:white:wps";
47		reg = <0x8>;
48	};
49
50	wps_amber@9 {
51		label = "rango:amber:wps";
52		reg = <0x9>;
53	};
54};
55
56&gpio_leds {
57	led-power {
58		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
59		label = "rango:white:power";
60	};
61
62	led-sata {
63		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
64		label = "rango:white:sata";
65	};
66
67	led-wlan_2g {
68		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
69		label = "rango:white:wlan_2g";
70	};
71
72	led-wlan_5g {
73		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
74		label = "rango:white:wlan_5g";
75	};
76};
77
78&gpio_leds_pins {
79	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
80};
81
82&nand {
83	/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
84	partitions {
85		compatible = "fixed-partitions";
86		#address-cells = <1>;
87		#size-cells = <1>;
88
89		partition@0 {
90			label = "u-boot";
91			reg = <0x0000000 0x200000>;  /* 2MiB */
92			read-only;
93		};
94
95		partition@200000 {
96			label = "u_env";
97			reg = <0x200000 0x20000>;    /* 128KiB */
98		};
99
100		partition@220000 {
101			label = "s_env";
102			reg = <0x220000 0x40000>;    /* 256KiB */
103		};
104
105		partition@7e0000 {
106			label = "devinfo";
107			reg = <0x7e0000 0x40000>;   /* 256KiB */
108			read-only;
109		};
110
111		partition@820000 {
112			label = "sysdiag";
113			reg = <0x820000 0x1e0000>;   /* 1920KiB */
114			read-only;
115		};
116
117		/* kernel1 overlaps with rootfs1 by design */
118		partition@a00000 {
119			label = "kernel1";
120			reg = <0xa00000 0x5000000>;  /* 80MiB */
121		};
122
123		partition@1000000 {
124			label = "rootfs1";
125			reg = <0x1000000 0x4a00000>;  /* 74MiB */
126		};
127
128		/* kernel2 overlaps with rootfs2 by design */
129		partition@5a00000 {
130			label = "kernel2";
131			reg = <0x5a00000 0x5000000>; /* 80MiB */
132		};
133
134		partition@6000000 {
135			label = "rootfs2";
136			reg = <0x6000000 0x4a00000>; /* 74MiB */
137		};
138
139		/*
140		 * 86MiB, last MiB is for the BBT, not writable
141		 */
142		partition@aa00000 {
143			label = "syscfg";
144			reg = <0xaa00000 0x5600000>;
145		};
146
147		/*
148		 * Unused area between "s_env" and "devinfo".
149		 * Moved here because otherwise the renumbered
150		 * partitions would break the bootloader
151		 * supplied bootargs
152		 */
153		partition@180000 {
154			label = "unused_area";
155			reg = <0x260000 0x5c0000>;   /* 5.75MiB */
156		};
157	};
158};
159
160&sdhci {
161	pinctrl-names = "default";
162	pinctrl-0 = <&sdhci_pins>;
163	no-1-8-v;
164	non-removable;
165	wp-inverted;
166	bus-width = <8>;
167	status = "okay";
168};
169
170&usb3_1_vbus {
171	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
172};
173
174&usb3_1_vbus_pins {
175	marvell,pins = "mpp44";
176};
177