1// SPDX-License-Identifier: ISC 2/* 3 * Device Tree file for the Goramo MultiLink Router 4 * There are two variants: 5 * - MultiLink Basic (a box) 6 * - MultiLink Max (19" rack mount) 7 * This device tree supports MultiLink Basic. 8 * This machine is based on IXP425. 9 * This is one of the few devices supporting the IXP4xx High-Speed Serial 10 * (HSS) link for a V.35 WAN interface. 11 * The hardware originates in Poland. 12 */ 13 14/dts-v1/; 15 16#include "intel-ixp42x.dtsi" 17#include <dt-bindings/input/input.h> 18 19/ { 20 model = "Goramo MultiLink Router"; 21 compatible = "goramo,multilink-router", "intel,ixp42x"; 22 #address-cells = <1>; 23 #size-cells = <1>; 24 25 memory@0 { 26 /* 27 * 64 MB of RAM according to the manual. The MultiLink 28 * Max has 128 MB. 29 */ 30 device_type = "memory"; 31 reg = <0x00000000 0x4000000>; 32 }; 33 34 chosen { 35 bootargs = "console=ttyS0,115200n8"; 36 stdout-path = "uart0:115200n8"; 37 }; 38 39 aliases { 40 serial0 = &uart0; 41 serial1 = &uart1; 42 }; 43 44 /* 45 * 74HC4094 which is used as a rudimentary GPIO expander 46 * FIXME: 47 * - Create device tree bindings for this as GPIO expander 48 * - Write a pure DT GPIO driver using these bindings 49 * - Support cascading in the style of gpio-74x164.c (cannot be reused, very different) 50 */ 51 gpio_74: gpio-74hc4094 { 52 compatible = "nxp,74hc4094"; 53 cp-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; 54 d-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; 55 str-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; 56 /* oe-gpios is optional */ 57 gpio-controller; 58 #gpio-cells = <2>; 59 /* We are not cascaded */ 60 registers-number = <1>; 61 gpio-line-names = "CONTROL_HSS0_CLK_INT", "CONTROL_HSS1_CLK_INT", "CONTROL_HSS0_DTR_N", 62 "CONTROL_HSS1_DTR_N", "CONTROL_EXT", "CONTROL_AUTO_RESET", 63 "CONTROL_PCI_RESET_N", "CONTROL_EEPROM_WC_N"; 64 }; 65 66 soc { 67 bus@c4000000 { 68 flash@0,0 { 69 compatible = "intel,ixp4xx-flash", "cfi-flash"; 70 bank-width = <2>; 71 /* Enable writes on the expansion bus */ 72 intel,ixp4xx-eb-write-enable = <1>; 73 /* 16 MB of Flash mapped in at CS0 */ 74 reg = <0 0x00000000 0x1000000>; 75 76 partitions { 77 compatible = "redboot-fis"; 78 /* Eraseblock at 0x0fe0000 */ 79 fis-index-block = <0x7f>; 80 }; 81 }; 82 }; 83 84 pci@c0000000 { 85 status = "okay"; 86 87 /* 88 * The device has 4 slots (IDSEL) with one dedicated IRQ per slot. 89 * The slots have Ethernet, Ethernet, NEC and MPCI. 90 * The IDSELs are 11, 12, 13, 14. 91 */ 92 interrupt-map = 93 /* IDSEL 11 - Ethernet A */ 94 <0x5800 0 0 1 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 11 is irq 4 */ 95 <0x5800 0 0 2 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 11 is irq 4 */ 96 <0x5800 0 0 3 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 11 is irq 4 */ 97 <0x5800 0 0 4 &gpio0 4 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 11 is irq 4 */ 98 /* IDSEL 12 - Ethernet B */ 99 <0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */ 100 <0x6000 0 0 2 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 12 is irq 5 */ 101 <0x6000 0 0 3 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 12 is irq 5 */ 102 <0x6000 0 0 4 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 12 is irq 5 */ 103 /* IDSEL 13 - MPCI */ 104 <0x6800 0 0 1 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 12 */ 105 <0x6800 0 0 2 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 12 */ 106 <0x6800 0 0 3 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 13 is irq 12 */ 107 <0x6800 0 0 4 &gpio0 12 IRQ_TYPE_LEVEL_LOW>, /* INT D on slot 13 is irq 12 */ 108 /* IDSEL 14 - NEC */ 109 <0x7000 0 0 1 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 3 */ 110 <0x7000 0 0 2 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 3 */ 111 <0x7000 0 0 3 &gpio0 3 IRQ_TYPE_LEVEL_LOW>, /* INT C on slot 14 is irq 3 */ 112 <0x7000 0 0 4 &gpio0 3 IRQ_TYPE_LEVEL_LOW>; /* INT D on slot 14 is irq 3 */ 113 }; 114 115 /* HSS links */ 116 npe@c8006000 { 117 hss@0 { 118 status = "okay"; 119 intel,queue-chl-rxtrig = <&qmgr 12>; 120 intel,queue-chl-txready = <&qmgr 34>; 121 intel,queue-pkt-rx = <&qmgr 13>; 122 intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>; 123 intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>; 124 intel,queue-pkt-txdone = <&qmgr 22>; 125 /* The Goramo GPIO-based clock etc control */ 126 cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; 127 rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; 128 dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; 129 dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>; 130 clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>; 131 }; 132 hss@1 { 133 status = "okay"; 134 intel,queue-chl-rxtrig = <&qmgr 10>; 135 intel,queue-chl-txready = <&qmgr 35>; 136 intel,queue-pkt-rx = <&qmgr 0>; 137 intel,queue-pkt-tx = <&qmgr 5>, <&qmgr 6>, <&qmgr 7>, <&qmgr 8>; 138 intel,queue-pkt-rxfree = <&qmgr 1>, <&qmgr 2>, <&qmgr 3>, <&qmgr 4>; 139 intel,queue-pkt-txdone = <&qmgr 9>; 140 /* The Goramo GPIO-based clock etc control */ 141 cts-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; 142 rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; 143 dcd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; 144 dtr-gpios = <&gpio_74 3 GPIO_ACTIVE_LOW>; 145 clk-internal-gpios = <&gpio_74 1 GPIO_ACTIVE_HIGH>; 146 }; 147 }; 148 149 /* EthB */ 150 ethernet@c8009000 { 151 status = "okay"; 152 queue-rx = <&qmgr 3>; 153 queue-txready = <&qmgr 32>; 154 phy-mode = "rgmii"; 155 phy-handle = <&phy0>; 156 157 mdio { 158 #address-cells = <1>; 159 #size-cells = <0>; 160 161 phy0: ethernet-phy@0 { 162 reg = <0>; 163 }; 164 165 phy1: ethernet-phy@1 { 166 reg = <1>; 167 }; 168 }; 169 }; 170 171 /* EthC */ 172 ethernet@c800a000 { 173 status = "okay"; 174 queue-rx = <&qmgr 4>; 175 queue-txready = <&qmgr 33>; 176 phy-mode = "rgmii"; 177 phy-handle = <&phy1>; 178 }; 179 }; 180}; 181