1/*
2 *  BSD LICENSE
3 *
4 *  Copyright(c) 2016 Broadcom.  All rights reserved.
5 *
6 *  Redistribution and use in source and binary forms, with or without
7 *  modification, are permitted provided that the following conditions
8 *  are met:
9 *
10 *    * Redistributions of source code must retain the above copyright
11 *      notice, this list of conditions and the following disclaimer.
12 *    * Redistributions in binary form must reproduce the above copyright
13 *      notice, this list of conditions and the following disclaimer in
14 *      the documentation and/or other materials provided with the
15 *      distribution.
16 *    * Neither the name of Broadcom Corporation nor the names of its
17 *      contributors may be used to endorse or promote products derived
18 *      from this software without specific prior written permission.
19 *
20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/dts-v1/;
34
35#include "bcm-nsp.dtsi"
36#include <dt-bindings/gpio/gpio.h>
37
38/ {
39	model = "NorthStar Plus SVK (BCM958625HR)";
40	compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
41
42	chosen {
43		stdout-path = "serial0:115200n8";
44	};
45
46	memory@60000000 {
47		device_type = "memory";
48		reg = <0x60000000 0x20000000>;
49	};
50
51	gpio-restart {
52		compatible = "gpio-restart";
53		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
54		open-source;
55		priority = <200>;
56	};
57
58	sfp: sfp {
59		compatible = "sff,sfp";
60		i2c-bus = <&i2c0>;
61		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
62		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
63		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
64		tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
65	};
66};
67
68&i2c0 {
69	status = "okay";
70};
71
72&dma {
73	status = "okay";
74};
75
76&amac0 {
77	status = "okay";
78};
79
80&amac1 {
81	status = "okay";
82};
83
84&amac2 {
85	status = "okay";
86};
87
88&ehci0 {
89	status = "okay";
90};
91
92&nand_controller {
93	nand@0 {
94		compatible = "brcm,nandcs";
95		reg = <0>;
96		nand-on-flash-bbt;
97
98		#address-cells = <1>;
99		#size-cells = <1>;
100
101		nand-ecc-strength = <24>;
102		nand-ecc-step-size = <1024>;
103
104		brcm,nand-oob-sector-size = <27>;
105
106		partition@0 {
107			label = "nboot";
108			reg = <0x00000000 0x00200000>;
109			read-only;
110		};
111		partition@200000 {
112			label = "nenv";
113			reg = <0x00200000 0x00400000>;
114		};
115		partition@600000 {
116			label = "nsystem";
117			reg = <0x00600000 0x00a00000>;
118		};
119		partition@1000000 {
120			label = "nrootfs";
121			reg = <0x01000000 0x03000000>;
122		};
123		partition@4000000 {
124			label = "ncustfs";
125			reg = <0x04000000 0x3c000000>;
126		};
127	};
128};
129
130&ohci0 {
131	status = "okay";
132};
133
134&pcie0 {
135	status = "okay";
136};
137
138&pcie1 {
139	status = "okay";
140};
141
142&pinctrl {
143	pinctrl-names = "default";
144	pinctrl-0 = <&nand_sel>;
145	nand_sel: nand_sel {
146		function = "nand";
147		groups = "nand_grp";
148	};
149};
150
151&qspi {
152	status = "okay";
153	bspi-sel = <0>;
154	flash: flash@0 {
155		#address-cells = <1>;
156		#size-cells = <1>;
157		compatible = "m25p80";
158		reg = <0x0>;
159		spi-max-frequency = <12500000>;
160		m25p,fast-read;
161		spi-cpol;
162		spi-cpha;
163
164		partition@0 {
165			label = "boot";
166			reg = <0x00000000 0x000a0000>;
167		};
168
169		partition@a0000 {
170			label = "env";
171			reg = <0x000a0000 0x00060000>;
172		};
173
174		partition@100000 {
175			label = "system";
176			reg = <0x00100000 0x00600000>;
177		};
178
179		partition@700000 {
180			label = "rootfs";
181			reg = <0x00700000 0x01900000>;
182		};
183	};
184};
185
186&sata_phy0 {
187	status = "okay";
188};
189
190&sata_phy1 {
191	status = "okay";
192};
193
194&srab {
195	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
196	status = "okay";
197
198	ports {
199		port@0 {
200			label = "port0";
201			reg = <0>;
202		};
203
204		port@1 {
205			label = "port1";
206			reg = <1>;
207		};
208
209		port@2 {
210			label = "port2";
211			reg = <2>;
212		};
213
214		port@3 {
215			label = "port3";
216			reg = <3>;
217		};
218
219		port@4 {
220			label = "port4";
221			reg = <4>;
222		};
223
224		port@5 {
225			label = "sfp";
226			phy-mode = "sgmii";
227			reg = <5>;
228			sfp = <&sfp>;
229			managed = "in-band-status";
230		};
231
232		port@8 {
233			ethernet = <&amac2>;
234			label = "cpu";
235			reg = <8>;
236			fixed-link {
237				speed = <1000>;
238				full-duplex;
239			};
240		};
241	};
242};
243
244&uart0 {
245	status = "okay";
246};
247
248&usb3_phy {
249	status = "okay";
250};
251
252&xhci {
253	status = "okay";
254};
255