xref: /openbmc/linux/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts (revision 8960f095)

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * Copyright 2018 Luxul Inc.
 */

/dts-v1/;

#include "bcm47094.dtsi"
#include "bcm5301x-nand-cs0-bch8.dtsi"

/ {
	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
	model = "Luxul XWR-3150 V1";

	chosen {
		bootargs = "earlycon";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x00000000 0x08000000>,
		      <0x88000000 0x18000000>;
	};

	nvram@1eff0000 {
		compatible = "brcm,nvram";
		reg = <0x1eff0000 0x10000>;

		et0macaddr: et0macaddr {
			#nvmem-cell-cells = <1>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led-power {
			label = "bcm53xx:green:power";
			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "default-on";
		};

		led-usb3 {
			label = "bcm53xx:green:usb3";
			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
			trigger-sources = <&ohci_port1>, <&ehci_port1>,
					  <&xhci_port1>;
			linux,default-trigger = "usbport";
		};

		led-status {
			label = "bcm53xx:green:status";
			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "timer";
		};

		led-2ghz {
			label = "bcm53xx:green:2ghz";
			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
		};

		led-5ghz {
			label = "bcm53xx:green:5ghz";
			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		button-restart {
			label = "Reset";
			linux,code = <KEY_RESTART>;
			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
		};
	};
};

&gmac0 {
	nvmem-cells = <&et0macaddr 0>;
	nvmem-cell-names = "mac-address";
};

&pcie0 {
	#address-cells = <3>;
	#size-cells = <2>;

	bridge@0,0 {
		reg = <0x0000 0 0 0 0>;

		#address-cells = <3>;
		#size-cells = <2>;

		wifi@0,0 {
			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
			reg = <0x0000 0 0 0 0>;
			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
		};
	};
};

&pcie1 {
	#address-cells = <3>;
	#size-cells = <2>;

	bridge@0,0 {
		reg = <0x0000 0 0 0 0>;

		#address-cells = <3>;
		#size-cells = <2>;

		wifi@0,0 {
			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
			reg = <0x0000 0 0 0 0>;
			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
		};
	};
};

&usb3 {
	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};

&usb3_phy {
	status = "okay";
};

&spi_nor {
	status = "okay";
};

&srab {
	status = "okay";

	ports {
		port@0 {
			label = "lan4";
		};

		port@1 {
			label = "lan3";
		};

		port@2 {
			label = "lan2";
		};

		port@3 {
			label = "lan1";
		};

		port@4 {
			label = "wan";
			nvmem-cells = <&et0macaddr 5>;
			nvmem-cell-names = "mac-address";
		};

		port@5 {
			label = "cpu";
		};
	};
};