1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2022 Arm Ltd,
4 * based on work:
5 *   Copyright 2022 Icenowy Zheng <uwu@icenowy.me>
6 */
7
8/dts-v1/;
9#include "suniv-f1c100s.dtsi"
10
11#include <dt-bindings/gpio/gpio.h>
12
13/ {
14	model = "Lctech Pi F1C200s";
15	compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s",
16		     "allwinner,suniv-f1c100s";
17
18	aliases {
19		serial0 = &uart1;
20	};
21
22	chosen {
23		stdout-path = "serial0:115200n8";
24	};
25
26	reg_vcc3v3: regulator-3v3 {
27		compatible = "regulator-fixed";
28		regulator-name = "vcc3v3";
29		regulator-min-microvolt = <3300000>;
30		regulator-max-microvolt = <3300000>;
31	};
32};
33
34&mmc0 {
35	broken-cd;
36	bus-width = <4>;
37	disable-wp;
38	vmmc-supply = <&reg_vcc3v3>;
39	status = "okay";
40};
41
42&otg_sram {
43	status = "okay";
44};
45
46&spi0 {
47	pinctrl-names = "default";
48	pinctrl-0 = <&spi0_pc_pins>;
49	status = "okay";
50
51	flash@0 {
52		compatible = "spi-nand";
53		reg = <0>;
54		spi-max-frequency = <40000000>;
55	};
56};
57
58&uart1 {
59	pinctrl-names = "default";
60	pinctrl-0 = <&uart1_pa_pins>;
61	status = "okay";
62};
63
64/*
65 * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected
66 * to Vin, which supplies the board. Host mode works (if the board is powered
67 * otherwise), but peripheral is probably the intention.
68 */
69&usb_otg {
70	dr_mode = "peripheral";
71	status = "okay";
72};
73
74&usbphy {
75	status = "okay";
76};
77