1/* 2 * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz> 3 * Copyright (C) 2021 Tobias Schramm <t.schramm@manjaro.org> 4 * 5 * This file is dual-licensed: you can use it either under the terms 6 * of the GPL or the X11 license, at your option. Note that this dual 7 * licensing only applies to this file, and not this project as a 8 * whole. 9 * 10 * a) This file is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of the 13 * License, or (at your option) any later version. 14 * 15 * This file is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * Or, alternatively, 21 * 22 * b) Permission is hereby granted, free of charge, to any person 23 * obtaining a copy of this software and associated documentation 24 * files (the "Software"), to deal in the Software without 25 * restriction, including without limitation the rights to use, 26 * copy, modify, merge, publish, distribute, sublicense, and/or 27 * sell copies of the Software, and to permit persons to whom the 28 * Software is furnished to do so, subject to the following 29 * conditions: 30 * 31 * The above copyright notice and this permission notice shall be 32 * included in all copies or substantial portions of the Software. 33 * 34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 41 * OTHER DEALINGS IN THE SOFTWARE. 42 */ 43 44#include <dt-bindings/interrupt-controller/arm-gic.h> 45#include <dt-bindings/clock/sun6i-rtc.h> 46#include <dt-bindings/clock/sun8i-v3s-ccu.h> 47#include <dt-bindings/reset/sun8i-v3s-ccu.h> 48#include <dt-bindings/clock/sun8i-de2.h> 49 50/ { 51 #address-cells = <1>; 52 #size-cells = <1>; 53 interrupt-parent = <&gic>; 54 55 chosen { 56 #address-cells = <1>; 57 #size-cells = <1>; 58 ranges; 59 60 framebuffer-lcd { 61 compatible = "allwinner,simple-framebuffer", 62 "simple-framebuffer"; 63 allwinner,pipeline = "mixer0-lcd0"; 64 clocks = <&display_clocks CLK_MIXER0>, 65 <&ccu CLK_TCON0>; 66 status = "disabled"; 67 }; 68 }; 69 70 cpus { 71 #address-cells = <1>; 72 #size-cells = <0>; 73 74 cpu@0 { 75 compatible = "arm,cortex-a7"; 76 device_type = "cpu"; 77 reg = <0>; 78 clocks = <&ccu CLK_CPU>; 79 }; 80 }; 81 82 de: display-engine { 83 compatible = "allwinner,sun8i-v3s-display-engine"; 84 allwinner,pipelines = <&mixer0>; 85 status = "disabled"; 86 }; 87 88 timer { 89 compatible = "arm,armv7-timer"; 90 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 91 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 92 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, 93 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; 94 }; 95 96 clocks { 97 #address-cells = <1>; 98 #size-cells = <1>; 99 ranges; 100 101 osc24M: osc24M_clk { 102 #clock-cells = <0>; 103 compatible = "fixed-clock"; 104 clock-frequency = <24000000>; 105 clock-accuracy = <50000>; 106 clock-output-names = "osc24M"; 107 }; 108 109 osc32k: osc32k_clk { 110 #clock-cells = <0>; 111 compatible = "fixed-clock"; 112 clock-frequency = <32768>; 113 clock-accuracy = <50000>; 114 clock-output-names = "ext-osc32k"; 115 }; 116 }; 117 118 soc { 119 compatible = "simple-bus"; 120 #address-cells = <1>; 121 #size-cells = <1>; 122 ranges; 123 124 display_clocks: clock@1000000 { 125 compatible = "allwinner,sun8i-v3s-de2-clk"; 126 reg = <0x01000000 0x10000>; 127 clocks = <&ccu CLK_BUS_DE>, 128 <&ccu CLK_DE>; 129 clock-names = "bus", 130 "mod"; 131 resets = <&ccu RST_BUS_DE>; 132 #clock-cells = <1>; 133 #reset-cells = <1>; 134 }; 135 136 mixer0: mixer@1100000 { 137 compatible = "allwinner,sun8i-v3s-de2-mixer"; 138 reg = <0x01100000 0x100000>; 139 clocks = <&display_clocks 0>, 140 <&display_clocks 6>; 141 clock-names = "bus", 142 "mod"; 143 resets = <&display_clocks 0>; 144 145 ports { 146 #address-cells = <1>; 147 #size-cells = <0>; 148 149 mixer0_out: port@1 { 150 reg = <1>; 151 152 mixer0_out_tcon0: endpoint { 153 remote-endpoint = <&tcon0_in_mixer0>; 154 }; 155 }; 156 }; 157 }; 158 159 syscon: system-control@1c00000 { 160 compatible = "allwinner,sun8i-v3s-system-control", 161 "allwinner,sun8i-h3-system-control"; 162 reg = <0x01c00000 0xd0>; 163 #address-cells = <1>; 164 #size-cells = <1>; 165 ranges; 166 }; 167 168 nmi_intc: interrupt-controller@1c000d0 { 169 compatible = "allwinner,sun8i-v3s-nmi", 170 "allwinner,sun9i-a80-nmi"; 171 interrupt-controller; 172 #interrupt-cells = <2>; 173 reg = <0x01c000d0 0x0c>; 174 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; 175 }; 176 177 dma: dma-controller@1c02000 { 178 compatible = "allwinner,sun8i-v3s-dma"; 179 reg = <0x01c02000 0x1000>; 180 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; 181 clocks = <&ccu CLK_BUS_DMA>; 182 resets = <&ccu RST_BUS_DMA>; 183 #dma-cells = <1>; 184 }; 185 186 tcon0: lcd-controller@1c0c000 { 187 compatible = "allwinner,sun8i-v3s-tcon"; 188 reg = <0x01c0c000 0x1000>; 189 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; 190 clocks = <&ccu CLK_BUS_TCON0>, 191 <&ccu CLK_TCON0>; 192 clock-names = "ahb", 193 "tcon-ch0"; 194 clock-output-names = "tcon-data-clock"; 195 #clock-cells = <0>; 196 resets = <&ccu RST_BUS_TCON0>; 197 reset-names = "lcd"; 198 status = "disabled"; 199 200 ports { 201 #address-cells = <1>; 202 #size-cells = <0>; 203 204 tcon0_in: port@0 { 205 reg = <0>; 206 207 tcon0_in_mixer0: endpoint { 208 remote-endpoint = <&mixer0_out_tcon0>; 209 }; 210 }; 211 212 tcon0_out: port@1 { 213 #address-cells = <1>; 214 #size-cells = <0>; 215 reg = <1>; 216 }; 217 }; 218 }; 219 220 221 mmc0: mmc@1c0f000 { 222 compatible = "allwinner,sun7i-a20-mmc"; 223 reg = <0x01c0f000 0x1000>; 224 clocks = <&ccu CLK_BUS_MMC0>, 225 <&ccu CLK_MMC0>, 226 <&ccu CLK_MMC0_OUTPUT>, 227 <&ccu CLK_MMC0_SAMPLE>; 228 clock-names = "ahb", 229 "mmc", 230 "output", 231 "sample"; 232 resets = <&ccu RST_BUS_MMC0>; 233 reset-names = "ahb"; 234 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; 235 pinctrl-names = "default"; 236 pinctrl-0 = <&mmc0_pins>; 237 status = "disabled"; 238 #address-cells = <1>; 239 #size-cells = <0>; 240 }; 241 242 mmc1: mmc@1c10000 { 243 compatible = "allwinner,sun7i-a20-mmc"; 244 reg = <0x01c10000 0x1000>; 245 clocks = <&ccu CLK_BUS_MMC1>, 246 <&ccu CLK_MMC1>, 247 <&ccu CLK_MMC1_OUTPUT>, 248 <&ccu CLK_MMC1_SAMPLE>; 249 clock-names = "ahb", 250 "mmc", 251 "output", 252 "sample"; 253 resets = <&ccu RST_BUS_MMC1>; 254 reset-names = "ahb"; 255 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; 256 pinctrl-names = "default"; 257 pinctrl-0 = <&mmc1_pins>; 258 status = "disabled"; 259 #address-cells = <1>; 260 #size-cells = <0>; 261 }; 262 263 mmc2: mmc@1c11000 { 264 compatible = "allwinner,sun7i-a20-mmc"; 265 reg = <0x01c11000 0x1000>; 266 clocks = <&ccu CLK_BUS_MMC2>, 267 <&ccu CLK_MMC2>, 268 <&ccu CLK_MMC2_OUTPUT>, 269 <&ccu CLK_MMC2_SAMPLE>; 270 clock-names = "ahb", 271 "mmc", 272 "output", 273 "sample"; 274 resets = <&ccu RST_BUS_MMC2>; 275 reset-names = "ahb"; 276 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; 277 status = "disabled"; 278 #address-cells = <1>; 279 #size-cells = <0>; 280 }; 281 282 crypto@1c15000 { 283 compatible = "allwinner,sun8i-v3s-crypto", 284 "allwinner,sun8i-a33-crypto"; 285 reg = <0x01c15000 0x1000>; 286 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; 287 clocks = <&ccu CLK_BUS_CE>, <&ccu CLK_CE>; 288 clock-names = "ahb", "mod"; 289 dmas = <&dma 16>, <&dma 16>; 290 dma-names = "rx", "tx"; 291 resets = <&ccu RST_BUS_CE>; 292 reset-names = "ahb"; 293 }; 294 295 usb_otg: usb@1c19000 { 296 compatible = "allwinner,sun8i-h3-musb"; 297 reg = <0x01c19000 0x0400>; 298 clocks = <&ccu CLK_BUS_OTG>; 299 resets = <&ccu RST_BUS_OTG>; 300 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; 301 interrupt-names = "mc"; 302 phys = <&usbphy 0>; 303 phy-names = "usb"; 304 extcon = <&usbphy 0>; 305 status = "disabled"; 306 }; 307 308 usbphy: phy@1c19400 { 309 compatible = "allwinner,sun8i-v3s-usb-phy"; 310 reg = <0x01c19400 0x2c>, 311 <0x01c1a800 0x4>; 312 reg-names = "phy_ctrl", 313 "pmu0"; 314 clocks = <&ccu CLK_USB_PHY0>; 315 clock-names = "usb0_phy"; 316 resets = <&ccu RST_USB_PHY0>; 317 reset-names = "usb0_reset"; 318 status = "disabled"; 319 #phy-cells = <1>; 320 }; 321 322 ccu: clock@1c20000 { 323 compatible = "allwinner,sun8i-v3s-ccu"; 324 reg = <0x01c20000 0x400>; 325 clocks = <&osc24M>, <&rtc CLK_OSC32K>; 326 clock-names = "hosc", "losc"; 327 #clock-cells = <1>; 328 #reset-cells = <1>; 329 }; 330 331 rtc: rtc@1c20400 { 332 #clock-cells = <1>; 333 compatible = "allwinner,sun8i-v3-rtc"; 334 reg = <0x01c20400 0x54>; 335 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, 336 <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; 337 clocks = <&osc32k>; 338 clock-output-names = "osc32k", "osc32k-out"; 339 }; 340 341 pio: pinctrl@1c20800 { 342 compatible = "allwinner,sun8i-v3s-pinctrl"; 343 reg = <0x01c20800 0x400>; 344 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, 345 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; 346 clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, 347 <&rtc CLK_OSC32K>; 348 clock-names = "apb", "hosc", "losc"; 349 gpio-controller; 350 #gpio-cells = <3>; 351 interrupt-controller; 352 #interrupt-cells = <3>; 353 354 /omit-if-no-ref/ 355 csi0_mclk_pin: csi0-mclk-pin { 356 pins = "PE20"; 357 function = "csi_mipi"; 358 }; 359 360 /omit-if-no-ref/ 361 csi1_8bit_pins: csi1-8bit-pins { 362 pins = "PE0", "PE2", "PE3", "PE8", "PE9", 363 "PE10", "PE11", "PE12", "PE13", "PE14", 364 "PE15"; 365 function = "csi"; 366 }; 367 368 /omit-if-no-ref/ 369 csi1_mclk_pin: csi1-mclk-pin { 370 pins = "PE1"; 371 function = "csi"; 372 }; 373 374 i2c0_pins: i2c0-pins { 375 pins = "PB6", "PB7"; 376 function = "i2c0"; 377 }; 378 379 /omit-if-no-ref/ 380 i2c1_pb_pins: i2c1-pb-pins { 381 pins = "PB8", "PB9"; 382 function = "i2c1"; 383 }; 384 385 /omit-if-no-ref/ 386 i2c1_pe_pins: i2c1-pe-pins { 387 pins = "PE21", "PE22"; 388 function = "i2c1"; 389 }; 390 391 uart0_pb_pins: uart0-pb-pins { 392 pins = "PB8", "PB9"; 393 function = "uart0"; 394 }; 395 396 uart2_pins: uart2-pins { 397 pins = "PB0", "PB1"; 398 function = "uart2"; 399 }; 400 401 mmc0_pins: mmc0-pins { 402 pins = "PF0", "PF1", "PF2", "PF3", 403 "PF4", "PF5"; 404 function = "mmc0"; 405 drive-strength = <30>; 406 bias-pull-up; 407 }; 408 409 mmc1_pins: mmc1-pins { 410 pins = "PG0", "PG1", "PG2", "PG3", 411 "PG4", "PG5"; 412 function = "mmc1"; 413 drive-strength = <30>; 414 bias-pull-up; 415 }; 416 417 spi0_pins: spi0-pins { 418 pins = "PC0", "PC1", "PC2", "PC3"; 419 function = "spi0"; 420 }; 421 }; 422 423 timer@1c20c00 { 424 compatible = "allwinner,sun8i-v3s-timer"; 425 reg = <0x01c20c00 0xa0>; 426 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, 427 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, 428 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 429 clocks = <&osc24M>; 430 }; 431 432 wdt0: watchdog@1c20ca0 { 433 compatible = "allwinner,sun6i-a31-wdt"; 434 reg = <0x01c20ca0 0x20>; 435 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; 436 clocks = <&osc24M>; 437 }; 438 439 pwm: pwm@1c21400 { 440 compatible = "allwinner,sun8i-v3s-pwm", 441 "allwinner,sun7i-a20-pwm"; 442 reg = <0x01c21400 0xc>; 443 clocks = <&osc24M>; 444 #pwm-cells = <3>; 445 status = "disabled"; 446 }; 447 448 lradc: lradc@1c22800 { 449 compatible = "allwinner,sun4i-a10-lradc-keys"; 450 reg = <0x01c22800 0x400>; 451 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; 452 status = "disabled"; 453 }; 454 455 codec: codec@1c22c00 { 456 #sound-dai-cells = <0>; 457 compatible = "allwinner,sun8i-v3s-codec"; 458 reg = <0x01c22c00 0x400>; 459 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; 460 clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; 461 clock-names = "apb", "codec"; 462 resets = <&ccu RST_BUS_CODEC>; 463 dmas = <&dma 15>, <&dma 15>; 464 dma-names = "rx", "tx"; 465 allwinner,codec-analog-controls = <&codec_analog>; 466 status = "disabled"; 467 }; 468 469 codec_analog: codec-analog@1c23000 { 470 compatible = "allwinner,sun8i-v3s-codec-analog"; 471 reg = <0x01c23000 0x4>; 472 }; 473 474 uart0: serial@1c28000 { 475 compatible = "snps,dw-apb-uart"; 476 reg = <0x01c28000 0x400>; 477 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; 478 reg-shift = <2>; 479 reg-io-width = <4>; 480 clocks = <&ccu CLK_BUS_UART0>; 481 dmas = <&dma 6>, <&dma 6>; 482 dma-names = "tx", "rx"; 483 resets = <&ccu RST_BUS_UART0>; 484 status = "disabled"; 485 }; 486 487 uart1: serial@1c28400 { 488 compatible = "snps,dw-apb-uart"; 489 reg = <0x01c28400 0x400>; 490 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; 491 reg-shift = <2>; 492 reg-io-width = <4>; 493 clocks = <&ccu CLK_BUS_UART1>; 494 dmas = <&dma 7>, <&dma 7>; 495 dma-names = "tx", "rx"; 496 resets = <&ccu RST_BUS_UART1>; 497 status = "disabled"; 498 }; 499 500 uart2: serial@1c28800 { 501 compatible = "snps,dw-apb-uart"; 502 reg = <0x01c28800 0x400>; 503 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; 504 reg-shift = <2>; 505 reg-io-width = <4>; 506 clocks = <&ccu CLK_BUS_UART2>; 507 dmas = <&dma 8>, <&dma 8>; 508 dma-names = "tx", "rx"; 509 resets = <&ccu RST_BUS_UART2>; 510 pinctrl-0 = <&uart2_pins>; 511 pinctrl-names = "default"; 512 status = "disabled"; 513 }; 514 515 i2c0: i2c@1c2ac00 { 516 compatible = "allwinner,sun6i-a31-i2c"; 517 reg = <0x01c2ac00 0x400>; 518 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 519 clocks = <&ccu CLK_BUS_I2C0>; 520 resets = <&ccu RST_BUS_I2C0>; 521 pinctrl-names = "default"; 522 pinctrl-0 = <&i2c0_pins>; 523 status = "disabled"; 524 #address-cells = <1>; 525 #size-cells = <0>; 526 }; 527 528 i2c1: i2c@1c2b000 { 529 compatible = "allwinner,sun6i-a31-i2c"; 530 reg = <0x01c2b000 0x400>; 531 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 532 clocks = <&ccu CLK_BUS_I2C1>; 533 resets = <&ccu RST_BUS_I2C1>; 534 status = "disabled"; 535 #address-cells = <1>; 536 #size-cells = <0>; 537 }; 538 539 emac: ethernet@1c30000 { 540 compatible = "allwinner,sun8i-v3s-emac"; 541 syscon = <&syscon>; 542 reg = <0x01c30000 0x10000>; 543 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; 544 interrupt-names = "macirq"; 545 resets = <&ccu RST_BUS_EMAC>; 546 reset-names = "stmmaceth"; 547 clocks = <&ccu CLK_BUS_EMAC>; 548 clock-names = "stmmaceth"; 549 phy-handle = <&int_mii_phy>; 550 phy-mode = "mii"; 551 status = "disabled"; 552 553 mdio: mdio { 554 #address-cells = <1>; 555 #size-cells = <0>; 556 compatible = "snps,dwmac-mdio"; 557 }; 558 559 mdio_mux: mdio-mux { 560 compatible = "allwinner,sun8i-h3-mdio-mux"; 561 #address-cells = <1>; 562 #size-cells = <0>; 563 564 mdio-parent-bus = <&mdio>; 565 /* Only one MDIO is usable at the time */ 566 internal_mdio: mdio@1 { 567 compatible = "allwinner,sun8i-h3-mdio-internal"; 568 reg = <1>; 569 #address-cells = <1>; 570 #size-cells = <0>; 571 572 int_mii_phy: ethernet-phy@1 { 573 compatible = "ethernet-phy-ieee802.3-c22"; 574 reg = <1>; 575 clocks = <&ccu CLK_BUS_EPHY>; 576 resets = <&ccu RST_BUS_EPHY>; 577 }; 578 }; 579 }; 580 }; 581 582 spi0: spi@1c68000 { 583 compatible = "allwinner,sun8i-h3-spi"; 584 reg = <0x01c68000 0x1000>; 585 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; 586 clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; 587 clock-names = "ahb", "mod"; 588 dmas = <&dma 23>, <&dma 23>; 589 dma-names = "rx", "tx"; 590 pinctrl-names = "default"; 591 pinctrl-0 = <&spi0_pins>; 592 resets = <&ccu RST_BUS_SPI0>; 593 status = "disabled"; 594 #address-cells = <1>; 595 #size-cells = <0>; 596 }; 597 598 gic: interrupt-controller@1c81000 { 599 compatible = "arm,gic-400"; 600 reg = <0x01c81000 0x1000>, 601 <0x01c82000 0x2000>, 602 <0x01c84000 0x2000>, 603 <0x01c86000 0x2000>; 604 interrupt-controller; 605 #interrupt-cells = <3>; 606 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; 607 }; 608 609 csi1: camera@1cb4000 { 610 compatible = "allwinner,sun8i-v3s-csi"; 611 reg = <0x01cb4000 0x3000>; 612 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; 613 clocks = <&ccu CLK_BUS_CSI>, 614 <&ccu CLK_CSI1_SCLK>, 615 <&ccu CLK_DRAM_CSI>; 616 clock-names = "bus", "mod", "ram"; 617 resets = <&ccu RST_BUS_CSI>; 618 status = "disabled"; 619 }; 620 }; 621}; 622