1/*
2 * Copyright 2015 Josef Gajdusek <atx@atx.name>
3 * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 *  a) This file is free software; you can redistribute it and/or
11 *     modify it under the terms of the GNU General Public License as
12 *     published by the Free Software Foundation; either version 2 of the
13 *     License, or (at your option) any later version.
14 *
15 *     This file is distributed in the hope that it will be useful,
16 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
17 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18 *     GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 *  b) Permission is hereby granted, free of charge, to any person
23 *     obtaining a copy of this software and associated documentation
24 *     files (the "Software"), to deal in the Software without
25 *     restriction, including without limitation the rights to use,
26 *     copy, modify, merge, publish, distribute, sublicense, and/or
27 *     sell copies of the Software, and to permit persons to whom the
28 *     Software is furnished to do so, subject to the following
29 *     conditions:
30 *
31 *     The above copyright notice and this permission notice shall be
32 *     included in all copies or substantial portions of the Software.
33 *
34 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 *     OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44/dts-v1/;
45#include "sun4i-a10.dtsi"
46#include "sunxi-itead-core-common.dtsi"
47
48/ {
49	model = "Iteaduino Plus A10";
50	compatible = "itead,iteaduino-plus-a10", "allwinner,sun4i-a10";
51};
52
53&ahci {
54	target-supply = <&reg_ahci_5v>;
55	status = "okay";
56};
57
58&emac {
59	pinctrl-names = "default";
60	pinctrl-0 = <&emac_pins>;
61	phy-handle = <&phy1>;
62	status = "okay";
63};
64
65&emac_sram {
66	status = "okay";
67};
68
69&i2c0 {
70	pinctrl-names = "default";
71	pinctrl-0 = <&i2c0_pins>;
72
73	axp209: pmic@34 {
74		interrupts = <0>;
75	};
76};
77
78&i2c1 {
79	pinctrl-names = "default";
80	pinctrl-0 = <&i2c1_pins>;
81	status = "okay";
82};
83
84&i2c2 {
85	pinctrl-names = "default";
86	pinctrl-0 = <&i2c2_pins>;
87	status = "okay";
88};
89
90&ir0 {
91	pinctrl-names = "default";
92	pinctrl-0 = <&ir0_rx_pins>;
93	status = "okay";
94};
95
96&mdio {
97	status = "okay";
98
99	phy1: ethernet-phy@1 {
100		reg = <1>;
101	};
102};
103
104&mmc0 {
105	pinctrl-names = "default";
106	pinctrl-0 = <&mmc0_pins>;
107	vmmc-supply = <&reg_vcc3v3>;
108	bus-width = <4>;
109	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
110	status = "okay";
111};
112
113&reg_ahci_5v {
114	status = "okay";
115};
116
117&spi0 {
118	pinctrl-names = "default";
119	pinctrl-0 = <&spi0_pi_pins>,
120		    <&spi0_cs0_pi_pin>;
121	status = "okay";
122};
123
124&uart0 {
125	pinctrl-0 = <&uart0_pb_pins>;
126};
127