1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * linux/arch/arm/boot/compressed/head-sa1100.S
4 *
5 * Copyright (C) 1999 Nicolas Pitre <nico@fluxnic.net>
6 *
7 * SA1100 specific tweaks.  This is merged into head.S by the linker.
8 *
9 */
10
11#include <linux/linkage.h>
12#include <asm/mach-types.h>
13
14		.section        ".start", "ax"
15		.arch	armv4
16
17__SA1100_start:
18
19		@ Preserve r8/r7 i.e. kernel entry values
20#ifdef CONFIG_SA1100_COLLIE
21		mov	r7, #MACH_TYPE_COLLIE
22#endif
23#ifdef CONFIG_SA1100_SIMPAD
24		@ UNTIL we've something like an open bootldr
25		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
26#endif
27		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
28		ands	r0, r0, #0x0d
29		beq	99f
30
31		@ Data cache might be active.
32		@ Be sure to flush kernel binary out of the cache,
33		@ whatever state it is, before it is turned off.
34		@ This is done by fetching through currently executed
35		@ memory to be sure we hit the same cache.
36		bic	r2, pc, #0x1f
37		add	r3, r2, #0x4000		@ 16 kb is quite enough...
381:		ldr	r0, [r2], #32
39		teq	r2, r3
40		bne	1b
41		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
42		mcr	p15, 0, r0, c7, c7, 0	@ flush I & D caches
43
44		@ disabling MMU and caches
45		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
46		bic	r0, r0, #0x0d		@ clear WB, DC, MMU
47		bic	r0, r0, #0x1000		@ clear Icache
48		mcr	p15, 0, r0, c1, c0, 0
4999:
50