1# SPDX-License-Identifier: GPL-2.0 2 3config ARM_PTDUMP_CORE 4 def_bool n 5 6config ARM_PTDUMP_DEBUGFS 7 bool "Export kernel pagetable layout to userspace via debugfs" 8 depends on DEBUG_KERNEL 9 depends on MMU 10 select ARM_PTDUMP_CORE 11 select DEBUG_FS 12 ---help--- 13 Say Y here if you want to show the kernel pagetable layout in a 14 debugfs file. This information is only useful for kernel developers 15 who are working in architecture specific areas of the kernel. 16 It is probably not a good idea to enable this feature in a production 17 kernel. 18 If in doubt, say "N" 19 20config DEBUG_WX 21 bool "Warn on W+X mappings at boot" 22 depends on MMU 23 select ARM_PTDUMP_CORE 24 ---help--- 25 Generate a warning if any W+X mappings are found at boot. 26 27 This is useful for discovering cases where the kernel is leaving 28 W+X mappings after applying NX, as such mappings are a security risk. 29 30 Look for a message in dmesg output like this: 31 32 arm/mm: Checked W+X mappings: passed, no W+X pages found. 33 34 or like this, if the check failed: 35 36 arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found. 37 38 Note that even if the check fails, your kernel is possibly 39 still fine, as W+X mappings are not a security hole in 40 themselves, what they do is that they make the exploitation 41 of other unfixed kernel bugs easier. 42 43 There is no runtime or memory usage effect of this option 44 once the kernel has booted up - it's a one time check. 45 46 If in doubt, say "Y". 47 48choice 49 prompt "Choose kernel unwinder" 50 default UNWINDER_ARM if AEABI 51 default UNWINDER_FRAME_POINTER if !AEABI 52 help 53 This determines which method will be used for unwinding kernel stack 54 traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack, 55 livepatch, lockdep, and more. 56 57config UNWINDER_FRAME_POINTER 58 bool "Frame pointer unwinder" 59 depends on !THUMB2_KERNEL 60 select ARCH_WANT_FRAME_POINTERS 61 select FRAME_POINTER 62 help 63 This option enables the frame pointer unwinder for unwinding 64 kernel stack traces. 65 66config UNWINDER_ARM 67 bool "ARM EABI stack unwinder" 68 depends on AEABI && !FUNCTION_GRAPH_TRACER 69 select ARM_UNWIND 70 help 71 This option enables stack unwinding support in the kernel 72 using the information automatically generated by the 73 compiler. The resulting kernel image is slightly bigger but 74 the performance is not affected. Currently, this feature 75 only works with EABI compilers. 76 77endchoice 78 79config ARM_UNWIND 80 bool 81 82config FRAME_POINTER 83 bool 84 85config DEBUG_USER 86 bool "Verbose user fault messages" 87 help 88 When a user program crashes due to an exception, the kernel can 89 print a brief message explaining what the problem was. This is 90 sometimes helpful for debugging but serves no purpose on a 91 production system. Most people should say N here. 92 93 In addition, you need to pass user_debug=N on the kernel command 94 line to enable this feature. N consists of the sum of: 95 96 1 - undefined instruction events 97 2 - system calls 98 4 - invalid data aborts 99 8 - SIGSEGV faults 100 16 - SIGBUS faults 101 102# These options are only for real kernel hackers who want to get their hands dirty. 103config DEBUG_LL 104 bool "Kernel low-level debugging functions (read help!)" 105 depends on DEBUG_KERNEL 106 help 107 Say Y here to include definitions of printascii, printch, printhex 108 in the kernel. This is helpful if you are debugging code that 109 executes before the console is initialized. 110 111 Note that selecting this option will limit the kernel to a single 112 UART definition, as specified below. Attempting to boot the kernel 113 image on a different platform *will not work*, so this option should 114 not be enabled for kernels that are intended to be portable. 115 116choice 117 prompt "Kernel low-level debugging port" 118 depends on DEBUG_LL 119 120 config DEBUG_ALPINE_UART0 121 bool "Kernel low-level debugging messages via Alpine UART0" 122 depends on ARCH_ALPINE 123 select DEBUG_UART_8250 124 help 125 Say Y here if you want kernel low-level debugging support 126 on Alpine based platforms. 127 128 config DEBUG_ASM9260_UART 129 bool "Kernel low-level debugging via asm9260 UART" 130 depends on MACH_ASM9260 131 help 132 Say Y here if you want the debug print routines to direct 133 their output to an UART or USART port on asm9260 based 134 machines. 135 136 DEBUG_UART_PHYS | DEBUG_UART_VIRT 137 138 0x80000000 | 0xf0000000 | UART0 139 0x80004000 | 0xf0004000 | UART1 140 0x80008000 | 0xf0008000 | UART2 141 0x8000c000 | 0xf000c000 | UART3 142 0x80010000 | 0xf0010000 | UART4 143 0x80014000 | 0xf0014000 | UART5 144 0x80018000 | 0xf0018000 | UART6 145 0x8001c000 | 0xf001c000 | UART7 146 0x80020000 | 0xf0020000 | UART8 147 0x80024000 | 0xf0024000 | UART9 148 149 config DEBUG_AT91_RM9200_DBGU 150 bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU" 151 select DEBUG_AT91_UART 152 depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 153 help 154 Say Y here if you want kernel low-level debugging support 155 on the DBGU port of: 156 at91rm9200, at91sam9260, at91sam9g20, at91sam9261, 157 at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60 158 159 config DEBUG_AT91_SAM9263_DBGU 160 bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU" 161 select DEBUG_AT91_UART 162 depends on SOC_AT91SAM9 || SOC_SAMA5D3 163 help 164 Say Y here if you want kernel low-level debugging support 165 on the DBGU port of: 166 at91sam9263, at91sam9g45, at91sam9m10, 167 sama5d3 168 169 config DEBUG_AT91_SAMA5D2_UART1 170 bool "Kernel low-level debugging on SAMA5D2 UART1" 171 select DEBUG_AT91_UART 172 depends on SOC_SAMA5D2 173 help 174 Say Y here if you want kernel low-level debugging support 175 on the UART1 port of sama5d2. 176 177 config DEBUG_AT91_SAMA5D4_USART3 178 bool "Kernel low-level debugging on SAMA5D4 USART3" 179 select DEBUG_AT91_UART 180 depends on SOC_SAMA5D4 181 help 182 Say Y here if you want kernel low-level debugging support 183 on the USART3 port of sama5d4. 184 185 config DEBUG_AT91_SAMV7_USART1 186 bool "Kernel low-level debugging via SAMV7 USART1" 187 select DEBUG_AT91_UART 188 depends on SOC_SAMV7 189 help 190 Say Y here if you want the debug print routines to direct 191 their output to the USART1 port on SAMV7 based 192 machines. 193 194 config DEBUG_BCM2835 195 bool "Kernel low-level debugging on BCM2835 PL011 UART" 196 depends on ARCH_BCM2835 && ARCH_MULTI_V6 197 select DEBUG_UART_PL01X 198 199 config DEBUG_BCM2836 200 bool "Kernel low-level debugging on BCM2836 PL011 UART" 201 depends on ARCH_BCM2835 && ARCH_MULTI_V7 202 select DEBUG_UART_PL01X 203 204 config DEBUG_BCM_5301X 205 bool "Kernel low-level debugging on BCM5301X/NSP UART1" 206 depends on ARCH_BCM_5301X || ARCH_BCM_NSP 207 select DEBUG_UART_8250 208 209 config DEBUG_BCM_HR2 210 bool "Kernel low-level debugging on Hurricane 2 UART2" 211 depends on ARCH_BCM_HR2 212 select DEBUG_UART_8250 213 214 config DEBUG_BCM_IPROC_UART3 215 bool "Kernel low-level debugging on BCM IPROC UART3" 216 depends on ARCH_BCM_CYGNUS 217 select DEBUG_UART_8250 218 help 219 Say Y here if you want the debug print routines to direct 220 their output to the third serial port on these devices. 221 222 config DEBUG_BCM_KONA_UART 223 bool "Kernel low-level debugging messages via BCM KONA UART" 224 depends on ARCH_BCM_MOBILE 225 select DEBUG_UART_8250 226 help 227 Say Y here if you want kernel low-level debugging support 228 on Broadcom SoC platforms. 229 This low level debug works for Broadcom 230 mobile SoCs in the Kona family of chips (e.g. bcm28155, 231 bcm11351, etc...) 232 233 config DEBUG_BCM63XX_UART 234 bool "Kernel low-level debugging on BCM63XX UART" 235 depends on ARCH_BCM_63XX 236 237 config DEBUG_BERLIN_UART 238 bool "Marvell Berlin SoC Debug UART" 239 depends on ARCH_BERLIN 240 select DEBUG_UART_8250 241 help 242 Say Y here if you want kernel low-level debugging support 243 on Marvell Berlin SoC based platforms. 244 245 config DEBUG_BRCMSTB_UART 246 bool "Use BRCMSTB UART for low-level debug" 247 depends on ARCH_BRCMSTB 248 help 249 Say Y here if you want the debug print routines to direct 250 their output to the first serial port on these devices. The 251 UART physical and virtual address is automatically provided 252 based on the chip identification register value. 253 254 If you have a Broadcom STB chip and would like early print 255 messages to appear over the UART, select this option. 256 257 config DEBUG_CLPS711X_UART1 258 bool "Kernel low-level debugging messages via UART1" 259 depends on ARCH_CLPS711X 260 help 261 Say Y here if you want the debug print routines to direct 262 their output to the first serial port on these devices. 263 264 config DEBUG_CLPS711X_UART2 265 bool "Kernel low-level debugging messages via UART2" 266 depends on ARCH_CLPS711X 267 help 268 Say Y here if you want the debug print routines to direct 269 their output to the second serial port on these devices. 270 271 config DEBUG_CNS3XXX 272 bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" 273 depends on ARCH_CNS3XXX 274 select DEBUG_UART_8250 275 help 276 Say Y here if you want the debug print routines to direct 277 their output to the CNS3xxx UART0. 278 279 config DEBUG_DAVINCI_DA8XX_UART1 280 bool "Kernel low-level debugging on DaVinci DA8XX using UART1" 281 depends on ARCH_DAVINCI_DA8XX 282 select DEBUG_UART_8250 283 help 284 Say Y here if you want the debug print routines to direct 285 their output to UART1 serial port on DaVinci DA8XX devices. 286 287 config DEBUG_DAVINCI_DA8XX_UART2 288 bool "Kernel low-level debugging on DaVinci DA8XX using UART2" 289 depends on ARCH_DAVINCI_DA8XX 290 select DEBUG_UART_8250 291 help 292 Say Y here if you want the debug print routines to direct 293 their output to UART2 serial port on DaVinci DA8XX devices. 294 295 config DEBUG_DAVINCI_DMx_UART0 296 bool "Kernel low-level debugging on DaVinci DMx using UART0" 297 depends on ARCH_DAVINCI_DMx 298 select DEBUG_UART_8250 299 help 300 Say Y here if you want the debug print routines to direct 301 their output to UART0 serial port on DaVinci DMx devices. 302 303 config DEBUG_DC21285_PORT 304 bool "Kernel low-level debugging messages via footbridge serial port" 305 depends on FOOTBRIDGE 306 help 307 Say Y here if you want the debug print routines to direct 308 their output to the serial port in the DC21285 (Footbridge). 309 310 config DEBUG_DIGICOLOR_UA0 311 bool "Kernel low-level debugging messages via Digicolor UA0" 312 depends on ARCH_DIGICOLOR 313 help 314 Say Y here if you want the debug print routines to direct 315 their output to the UA0 serial port in the CX92755. 316 317 config DEBUG_EP93XX 318 bool "Kernel low-level debugging messages via ep93xx UART" 319 depends on ARCH_EP93XX 320 select DEBUG_UART_PL01X 321 help 322 Say Y here if you want kernel low-level debugging support 323 on Cirrus Logic EP93xx based platforms. 324 325 config DEBUG_FOOTBRIDGE_COM1 326 bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" 327 depends on FOOTBRIDGE 328 select DEBUG_UART_8250 329 help 330 Say Y here if you want the debug print routines to direct 331 their output to the 8250 at PCI COM1. 332 333 config DEBUG_GEMINI 334 bool "Kernel low-level debugging messages via Cortina Systems Gemini UART" 335 depends on ARCH_GEMINI 336 select DEBUG_UART_8250 337 help 338 Say Y here if you want kernel low-level debugging support 339 on Cortina Gemini based platforms. 340 341 config DEBUG_HI3620_UART 342 bool "Hisilicon HI3620 Debug UART" 343 depends on ARCH_HI3xxx 344 select DEBUG_UART_PL01X 345 help 346 Say Y here if you want kernel low-level debugging support 347 on HI3620 UART. 348 349 config DEBUG_HIGHBANK_UART 350 bool "Kernel low-level debugging messages via Highbank UART" 351 depends on ARCH_HIGHBANK 352 select DEBUG_UART_PL01X 353 help 354 Say Y here if you want the debug print routines to direct 355 their output to the UART on Highbank based devices. 356 357 config DEBUG_HIP01_UART 358 bool "Hisilicon Hip01 Debug UART" 359 depends on ARCH_HIP01 360 select DEBUG_UART_8250 361 help 362 Say Y here if you want kernel low-level debugging support 363 on HIP01 UART. 364 365 config DEBUG_HIP04_UART 366 bool "Hisilicon HiP04 Debug UART" 367 depends on ARCH_HIP04 368 select DEBUG_UART_8250 369 help 370 Say Y here if you want kernel low-level debugging support 371 on HIP04 UART. 372 373 config DEBUG_HIX5HD2_UART 374 bool "Hisilicon Hix5hd2 Debug UART" 375 depends on ARCH_HIX5HD2 376 select DEBUG_UART_PL01X 377 help 378 Say Y here if you want kernel low-level debugging support 379 on Hix5hd2 UART. 380 381 config DEBUG_IMX1_UART 382 bool "i.MX1 Debug UART" 383 depends on SOC_IMX1 384 help 385 Say Y here if you want kernel low-level debugging support 386 on i.MX1. 387 388 config DEBUG_IMX23_UART 389 bool "i.MX23 Debug UART" 390 depends on SOC_IMX23 391 select DEBUG_UART_PL01X 392 help 393 Say Y here if you want kernel low-level debugging support 394 on i.MX23. 395 396 config DEBUG_IMX25_UART 397 bool "i.MX25 Debug UART" 398 depends on SOC_IMX25 399 help 400 Say Y here if you want kernel low-level debugging support 401 on i.MX25. 402 403 config DEBUG_IMX21_IMX27_UART 404 bool "i.MX21 and i.MX27 Debug UART" 405 depends on SOC_IMX21 || SOC_IMX27 406 help 407 Say Y here if you want kernel low-level debugging support 408 on i.MX21 or i.MX27. 409 410 config DEBUG_IMX28_UART 411 bool "i.MX28 Debug UART" 412 depends on SOC_IMX28 413 select DEBUG_UART_PL01X 414 help 415 Say Y here if you want kernel low-level debugging support 416 on i.MX28. 417 418 config DEBUG_IMX31_UART 419 bool "i.MX31 Debug UART" 420 depends on SOC_IMX31 421 help 422 Say Y here if you want kernel low-level debugging support 423 on i.MX31. 424 425 config DEBUG_IMX35_UART 426 bool "i.MX35 Debug UART" 427 depends on SOC_IMX35 428 help 429 Say Y here if you want kernel low-level debugging support 430 on i.MX35. 431 432 config DEBUG_IMX50_UART 433 bool "i.MX50 Debug UART" 434 depends on SOC_IMX50 435 help 436 Say Y here if you want kernel low-level debugging support 437 on i.MX50. 438 439 config DEBUG_IMX51_UART 440 bool "i.MX51 Debug UART" 441 depends on SOC_IMX51 442 help 443 Say Y here if you want kernel low-level debugging support 444 on i.MX51. 445 446 config DEBUG_IMX53_UART 447 bool "i.MX53 Debug UART" 448 depends on SOC_IMX53 449 help 450 Say Y here if you want kernel low-level debugging support 451 on i.MX53. 452 453 config DEBUG_IMX6Q_UART 454 bool "i.MX6Q/DL Debug UART" 455 depends on SOC_IMX6Q 456 help 457 Say Y here if you want kernel low-level debugging support 458 on i.MX6Q/DL. 459 460 config DEBUG_IMX6SL_UART 461 bool "i.MX6SL Debug UART" 462 depends on SOC_IMX6SL 463 help 464 Say Y here if you want kernel low-level debugging support 465 on i.MX6SL. 466 467 config DEBUG_IMX6SX_UART 468 bool "i.MX6SX Debug UART" 469 depends on SOC_IMX6SX 470 help 471 Say Y here if you want kernel low-level debugging support 472 on i.MX6SX. 473 474 config DEBUG_IMX6UL_UART 475 bool "i.MX6UL Debug UART" 476 depends on SOC_IMX6UL 477 help 478 Say Y here if you want kernel low-level debugging support 479 on i.MX6UL. 480 481 config DEBUG_IMX7D_UART 482 bool "i.MX7D Debug UART" 483 depends on SOC_IMX7D 484 help 485 Say Y here if you want kernel low-level debugging support 486 on i.MX7D. 487 488 config DEBUG_INTEGRATOR 489 bool "Kernel low-level debugging messages via ARM Integrator UART" 490 depends on ARCH_INTEGRATOR 491 select DEBUG_UART_PL01X 492 help 493 Say Y here if you want kernel low-level debugging support 494 on ARM Integrator platforms. 495 496 config DEBUG_KEYSTONE_UART0 497 bool "Kernel low-level debugging on KEYSTONE2 using UART0" 498 depends on ARCH_KEYSTONE 499 select DEBUG_UART_8250 500 help 501 Say Y here if you want the debug print routines to direct 502 their output to UART0 serial port on KEYSTONE2 devices. 503 504 config DEBUG_KEYSTONE_UART1 505 bool "Kernel low-level debugging on KEYSTONE2 using UART1" 506 depends on ARCH_KEYSTONE 507 select DEBUG_UART_8250 508 help 509 Say Y here if you want the debug print routines to direct 510 their output to UART1 serial port on KEYSTONE2 devices. 511 512 config DEBUG_LPC18XX_UART0 513 bool "Kernel low-level debugging via LPC18xx/43xx UART0" 514 depends on ARCH_LPC18XX 515 select DEBUG_UART_8250 516 help 517 Say Y here if you want kernel low-level debugging support 518 on NXP LPC18xx/43xx UART0. 519 520 config DEBUG_LPC32XX 521 bool "Kernel low-level debugging messages via NXP LPC32xx UART" 522 depends on ARCH_LPC32XX 523 select DEBUG_UART_8250 524 help 525 Say Y here if you want kernel low-level debugging support 526 on NXP LPC32xx based platforms. 527 528 config DEBUG_MESON_UARTAO 529 bool "Kernel low-level debugging via Meson6 UARTAO" 530 depends on ARCH_MESON 531 help 532 Say Y here if you want kernel low-lever debugging support 533 on Amlogic Meson6 based platforms on the UARTAO. 534 535 config DEBUG_MMP_UART2 536 bool "Kernel low-level debugging message via MMP UART2" 537 depends on ARCH_MMP 538 select DEBUG_UART_8250 539 help 540 Say Y here if you want kernel low-level debugging support 541 on MMP UART2. 542 543 config DEBUG_MMP_UART3 544 bool "Kernel low-level debugging message via MMP UART3" 545 depends on ARCH_MMP 546 select DEBUG_UART_8250 547 help 548 Say Y here if you want kernel low-level debugging support 549 on MMP UART3. 550 551 config DEBUG_MVEBU_UART0 552 bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)" 553 depends on ARCH_MVEBU 554 depends on ARCH_MVEBU && CPU_V7 555 select DEBUG_UART_8250 556 help 557 Say Y here if you want kernel low-level debugging support 558 on MVEBU based platforms on UART0. 559 560 This option should be used with the old bootloaders 561 that left the internal registers mapped at 562 0xd0000000. As of today, this is the case on 563 platforms such as the Globalscale Mirabox or the 564 Plathome OpenBlocks AX3, when using the original 565 bootloader. 566 567 This option will not work on older Marvell platforms 568 (Kirkwood, Dove, MV78xx0, Orion5x), which should pick 569 the "new bootloader" variant. 570 571 If the wrong DEBUG_MVEBU_UART* option is selected, 572 when u-boot hands over to the kernel, the system 573 silently crashes, with no serial output at all. 574 575 config DEBUG_MVEBU_UART0_ALTERNATE 576 bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)" 577 depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X 578 select DEBUG_UART_8250 579 help 580 Say Y here if you want kernel low-level debugging support 581 on MVEBU based platforms on UART0. (Armada XP, Armada 3xx, 582 Kirkwood, Dove, MV78xx0, Orion5x). 583 584 585 This option should be used with the new bootloaders 586 that remap the internal registers at 0xf1000000. 587 588 If the wrong DEBUG_MVEBU_UART* option is selected, 589 when u-boot hands over to the kernel, the system 590 silently crashes, with no serial output at all. 591 592 config DEBUG_MVEBU_UART1_ALTERNATE 593 bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)" 594 depends on ARCH_MVEBU 595 select DEBUG_UART_8250 596 help 597 Say Y here if you want kernel low-level debugging support 598 on MVEBU based platforms on UART1. (Armada XP, Armada 3xx, 599 Kirkwood, Dove, MV78xx0, Orion5x). 600 601 This option should be used with the new bootloaders 602 that remap the internal registers at 0xf1000000. 603 All of the older (pre Armada XP/370) platforms also use 604 this address, regardless of the boot loader version. 605 606 If the wrong DEBUG_MVEBU_UART* option is selected, 607 when u-boot hands over to the kernel, the system 608 silently crashes, with no serial output at all. 609 610 config DEBUG_MT6589_UART0 611 bool "Mediatek mt6589 UART0" 612 depends on ARCH_MEDIATEK 613 select DEBUG_UART_8250 614 help 615 Say Y here if you want kernel low-level debugging support 616 for Mediatek mt6589 based platforms on UART0. 617 618 config DEBUG_MT8127_UART0 619 bool "Mediatek mt8127/mt6592 UART0" 620 depends on ARCH_MEDIATEK 621 select DEBUG_UART_8250 622 help 623 Say Y here if you want kernel low-level debugging support 624 for Mediatek mt8127 based platforms on UART0. 625 626 config DEBUG_MT8135_UART3 627 bool "Mediatek mt8135 UART3" 628 depends on ARCH_MEDIATEK 629 select DEBUG_UART_8250 630 help 631 Say Y here if you want kernel low-level debugging support 632 for Mediatek mt8135 based platforms on UART3. 633 634 config DEBUG_NOMADIK_UART 635 bool "Kernel low-level debugging messages via NOMADIK UART" 636 depends on ARCH_NOMADIK 637 select DEBUG_UART_PL01X 638 help 639 Say Y here if you want kernel low-level debugging support 640 on NOMADIK based platforms. 641 642 config DEBUG_NSPIRE_CLASSIC_UART 643 bool "Kernel low-level debugging via TI-NSPIRE 8250 UART" 644 depends on ARCH_NSPIRE 645 select DEBUG_UART_8250 646 help 647 Say Y here if you want kernel low-level debugging support 648 on TI-NSPIRE classic models. 649 650 config DEBUG_NSPIRE_CX_UART 651 bool "Kernel low-level debugging via TI-NSPIRE PL011 UART" 652 depends on ARCH_NSPIRE 653 select DEBUG_UART_PL01X 654 help 655 Say Y here if you want kernel low-level debugging support 656 on TI-NSPIRE CX models. 657 658 config DEBUG_OMAP1UART1 659 bool "Kernel low-level debugging via OMAP1 UART1" 660 depends on ARCH_OMAP1 661 select DEBUG_UART_8250 662 help 663 Say Y here if you want kernel low-level debugging support 664 on OMAP1 based platforms (except OMAP730) on the UART1. 665 666 config DEBUG_OMAP1UART2 667 bool "Kernel low-level debugging via OMAP1 UART2" 668 depends on ARCH_OMAP1 669 select DEBUG_UART_8250 670 help 671 Say Y here if you want kernel low-level debugging support 672 on OMAP1 based platforms (except OMAP730) on the UART2. 673 674 config DEBUG_OMAP1UART3 675 bool "Kernel low-level debugging via OMAP1 UART3" 676 depends on ARCH_OMAP1 677 select DEBUG_UART_8250 678 help 679 Say Y here if you want kernel low-level debugging support 680 on OMAP1 based platforms (except OMAP730) on the UART3. 681 682 config DEBUG_OMAP2UART1 683 bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" 684 depends on ARCH_OMAP2PLUS 685 select DEBUG_UART_8250 686 help 687 This covers at least h4, 2430sdp, 3430sdp, 3630sdp, 688 omap3 torpedo and 3530 lv som. 689 690 config DEBUG_OMAP2UART2 691 bool "Kernel low-level debugging messages via OMAP2/3/4 UART2" 692 depends on ARCH_OMAP2PLUS 693 select DEBUG_UART_8250 694 695 config DEBUG_OMAP2UART3 696 bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)" 697 depends on ARCH_OMAP2PLUS 698 select DEBUG_UART_8250 699 700 config DEBUG_OMAP3UART3 701 bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)" 702 depends on ARCH_OMAP2PLUS 703 select DEBUG_UART_8250 704 help 705 This covers at least cm_t3x, beagle, crane, devkit8000, 706 igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, 707 and 3517evm. 708 709 config DEBUG_OMAP4UART3 710 bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" 711 depends on ARCH_OMAP2PLUS 712 select DEBUG_UART_8250 713 714 config DEBUG_OMAP3UART4 715 bool "Kernel low-level debugging messages via OMAP36XX UART4" 716 depends on ARCH_OMAP2PLUS 717 select DEBUG_UART_8250 718 719 config DEBUG_OMAP4UART4 720 bool "Kernel low-level debugging messages via OMAP4/5 UART4" 721 depends on ARCH_OMAP2PLUS 722 select DEBUG_UART_8250 723 724 config DEBUG_OMAP7XXUART1 725 bool "Kernel low-level debugging via OMAP730 UART1" 726 depends on ARCH_OMAP730 727 select DEBUG_UART_8250 728 help 729 Say Y here if you want kernel low-level debugging support 730 on OMAP730 based platforms on the UART1. 731 732 config DEBUG_OMAP7XXUART2 733 bool "Kernel low-level debugging via OMAP730 UART2" 734 depends on ARCH_OMAP730 735 select DEBUG_UART_8250 736 help 737 Say Y here if you want kernel low-level debugging support 738 on OMAP730 based platforms on the UART2. 739 740 config DEBUG_OMAP7XXUART3 741 bool "Kernel low-level debugging via OMAP730 UART3" 742 depends on ARCH_OMAP730 743 select DEBUG_UART_8250 744 help 745 Say Y here if you want kernel low-level debugging support 746 on OMAP730 based platforms on the UART3. 747 748 config DEBUG_TI81XXUART1 749 bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)" 750 depends on ARCH_OMAP2PLUS 751 select DEBUG_UART_8250 752 753 config DEBUG_TI81XXUART2 754 bool "Kernel low-level debugging messages via TI81XX UART2" 755 depends on ARCH_OMAP2PLUS 756 select DEBUG_UART_8250 757 758 config DEBUG_TI81XXUART3 759 bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)" 760 depends on ARCH_OMAP2PLUS 761 select DEBUG_UART_8250 762 763 config DEBUG_AM33XXUART1 764 bool "Kernel low-level debugging messages via AM33XX UART1" 765 depends on ARCH_OMAP2PLUS 766 select DEBUG_UART_8250 767 768 config DEBUG_ZOOM_UART 769 bool "Kernel low-level debugging messages via Zoom2/3 UART" 770 depends on ARCH_OMAP2PLUS 771 select DEBUG_OMAP2PLUS_UART 772 773 config DEBUG_PICOXCELL_UART 774 depends on ARCH_PICOXCELL 775 bool "Use PicoXcell UART for low-level debug" 776 select DEBUG_UART_8250 777 help 778 Say Y here if you want kernel low-level debugging support 779 on PicoXcell based platforms. 780 781 config DEBUG_PXA_UART1 782 depends on ARCH_PXA 783 bool "Use PXA UART1 for low-level debug" 784 select DEBUG_UART_8250 785 help 786 Say Y here if you want kernel low-level debugging support 787 on PXA UART1. 788 789 config DEBUG_QCOM_UARTDM 790 bool "Kernel low-level debugging messages via QCOM UARTDM" 791 depends on ARCH_QCOM 792 help 793 Say Y here if you want the debug print routines to direct 794 their output to the serial port on Qualcomm devices. 795 796 ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT 797 APQ8064 0x16640000 0xf0040000 798 APQ8084 0xf995e000 0xfa75e000 799 IPQ4019 0x078af000 0xf78af000 800 MSM8X60 0x19c40000 0xf0040000 801 MSM8960 0x16440000 0xf0040000 802 MSM8974 0xf991e000 0xfa71e000 803 804 Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration 805 options based on your needs. 806 807 config DEBUG_REALVIEW_STD_PORT 808 bool "RealView Default UART" 809 depends on ARCH_REALVIEW 810 select DEBUG_UART_PL01X 811 help 812 Say Y here if you want the debug print routines to direct 813 their output to the serial port on RealView EB, PB11MP, PBA8 814 and PBX platforms. 815 816 config DEBUG_REALVIEW_PB1176_PORT 817 bool "RealView PB1176 UART" 818 depends on MACH_REALVIEW_PB1176 819 select DEBUG_UART_PL01X 820 help 821 Say Y here if you want the debug print routines to direct 822 their output to the standard serial port on the RealView 823 PB1176 platform. 824 825 config DEBUG_RV1108_UART0 826 bool "Kernel low-level debugging messages via Rockchip RV1108 UART0" 827 depends on ARCH_ROCKCHIP 828 select DEBUG_UART_8250 829 help 830 Say Y here if you want kernel low-level debugging support 831 on Rockchip RV1108 based platforms. 832 833 config DEBUG_RV1108_UART1 834 bool "Kernel low-level debugging messages via Rockchip RV1108 UART1" 835 depends on ARCH_ROCKCHIP 836 select DEBUG_UART_8250 837 help 838 Say Y here if you want kernel low-level debugging support 839 on Rockchip RV1108 based platforms. 840 841 config DEBUG_RV1108_UART2 842 bool "Kernel low-level debugging messages via Rockchip RV1108 UART2" 843 depends on ARCH_ROCKCHIP 844 select DEBUG_UART_8250 845 help 846 Say Y here if you want kernel low-level debugging support 847 on Rockchip RV1108 based platforms. 848 849 config DEBUG_RK29_UART0 850 bool "Kernel low-level debugging messages via Rockchip RK29 UART0" 851 depends on ARCH_ROCKCHIP 852 select DEBUG_UART_8250 853 help 854 Say Y here if you want kernel low-level debugging support 855 on Rockchip based platforms. 856 857 config DEBUG_RK29_UART1 858 bool "Kernel low-level debugging messages via Rockchip RK29 UART1" 859 depends on ARCH_ROCKCHIP 860 select DEBUG_UART_8250 861 help 862 Say Y here if you want kernel low-level debugging support 863 on Rockchip based platforms. 864 865 config DEBUG_RK29_UART2 866 bool "Kernel low-level debugging messages via Rockchip RK29 UART2" 867 depends on ARCH_ROCKCHIP 868 select DEBUG_UART_8250 869 help 870 Say Y here if you want kernel low-level debugging support 871 on Rockchip based platforms. 872 873 config DEBUG_RK3X_UART0 874 bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0" 875 depends on ARCH_ROCKCHIP 876 select DEBUG_UART_8250 877 help 878 Say Y here if you want kernel low-level debugging support 879 on Rockchip based platforms. 880 881 config DEBUG_RK3X_UART1 882 bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1" 883 depends on ARCH_ROCKCHIP 884 select DEBUG_UART_8250 885 help 886 Say Y here if you want kernel low-level debugging support 887 on Rockchip based platforms. 888 889 config DEBUG_RK3X_UART2 890 bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2" 891 depends on ARCH_ROCKCHIP 892 select DEBUG_UART_8250 893 help 894 Say Y here if you want kernel low-level debugging support 895 on Rockchip based platforms. 896 897 config DEBUG_RK3X_UART3 898 bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3" 899 depends on ARCH_ROCKCHIP 900 select DEBUG_UART_8250 901 help 902 Say Y here if you want kernel low-level debugging support 903 on Rockchip based platforms. 904 905 config DEBUG_RK32_UART2 906 bool "Kernel low-level debugging messages via Rockchip RK32 UART2" 907 depends on ARCH_ROCKCHIP 908 select DEBUG_UART_8250 909 help 910 Say Y here if you want kernel low-level debugging support 911 on Rockchip RK32xx based platforms. 912 913 config DEBUG_R7S72100_SCIF2 914 bool "Kernel low-level debugging messages via SCIF2 on R7S72100" 915 depends on ARCH_R7S72100 916 help 917 Say Y here if you want kernel low-level debugging support 918 via SCIF2 on Renesas RZ/A1H (R7S72100). 919 920 config DEBUG_R7S9210_SCIF2 921 bool "Kernel low-level debugging messages via SCIF2 on R7S9210" 922 depends on ARCH_R7S9210 923 help 924 Say Y here if you want kernel low-level debugging support 925 via SCIF2 on Renesas RZ/A2M (R7S9210). 926 927 config DEBUG_R7S9210_SCIF4 928 bool "Kernel low-level debugging messages via SCIF4 on R7S9210" 929 depends on ARCH_R7S9210 930 help 931 Say Y here if you want kernel low-level debugging support 932 via SCIF4 on Renesas RZ/A2M (R7S9210). 933 934 config DEBUG_RCAR_GEN1_SCIF0 935 bool "Kernel low-level debugging messages via SCIF0 on R8A7778" 936 depends on ARCH_R8A7778 937 help 938 Say Y here if you want kernel low-level debugging support 939 via SCIF0 on Renesas R-Car M1A (R8A7778). 940 941 config DEBUG_RCAR_GEN1_SCIF2 942 bool "Kernel low-level debugging messages via SCIF2 on R8A7779" 943 depends on ARCH_R8A7779 944 help 945 Say Y here if you want kernel low-level debugging support 946 via SCIF2 on Renesas R-Car H1 (R8A7779). 947 948 config DEBUG_RCAR_GEN2_SCIF0 949 bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1" 950 depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \ 951 ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793 952 help 953 Say Y here if you want kernel low-level debugging support 954 via SCIF0 on Renesas RZ/G1M (R8A7743), RZ/G1N (R8A7744), 955 R-Car H2 (R8A7790), M2-W (R8A7791), V2H (R8A7792), or 956 M2-N (R8A7793). 957 958 config DEBUG_RCAR_GEN2_SCIF1 959 bool "Kernel low-level debugging messages via SCIF1 on R8A77470" 960 depends on ARCH_R8A77470 961 help 962 Say Y here if you want kernel low-level debugging support 963 via SCIF1 on Renesas RZ/G1C (R8A77470). 964 965 config DEBUG_RCAR_GEN2_SCIF2 966 bool "Kernel low-level debugging messages via SCIF2 on R8A7794" 967 depends on ARCH_R8A7794 968 help 969 Say Y here if you want kernel low-level debugging support 970 via SCIF2 on Renesas R-Car E2 (R8A7794). 971 972 config DEBUG_RCAR_GEN2_SCIF4 973 bool "Kernel low-level debugging messages via SCIF4 on R8A7745" 974 depends on ARCH_R8A7745 975 help 976 Say Y here if you want kernel low-level debugging support 977 via SCIF4 on Renesas RZ/G1E (R8A7745). 978 979 config DEBUG_RCAR_GEN2_SCIFA2 980 bool "Kernel low-level debugging messages via SCIFA2 on R8A7742" 981 depends on ARCH_R8A7742 982 help 983 Say Y here if you want kernel low-level debugging support 984 via SCIFA2 on Renesas RZ/G1H (R8A7742). 985 986 config DEBUG_RMOBILE_SCIFA0 987 bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4" 988 depends on ARCH_R8A73A4 989 help 990 Say Y here if you want kernel low-level debugging support 991 via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4). 992 993 config DEBUG_RMOBILE_SCIFA1 994 bool "Kernel low-level debugging messages via SCIFA1 on R8A7740" 995 depends on ARCH_R8A7740 996 help 997 Say Y here if you want kernel low-level debugging support 998 via SCIFA1 on Renesas R-Mobile A1 (R8A7740). 999 1000 config DEBUG_RMOBILE_SCIFA4 1001 bool "Kernel low-level debugging messages via SCIFA4 on SH73A0" 1002 depends on ARCH_SH73A0 1003 help 1004 Say Y here if you want kernel low-level debugging support 1005 via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0). 1006 1007 config DEBUG_S3C_UART0 1008 depends on PLAT_SAMSUNG 1009 select DEBUG_EXYNOS_UART if ARCH_EXYNOS 1010 select DEBUG_S3C24XX_UART if ARCH_S3C24XX 1011 select DEBUG_S3C64XX_UART if ARCH_S3C64XX 1012 select DEBUG_S5PV210_UART if ARCH_S5PV210 1013 bool "Use Samsung S3C UART 0 for low-level debug" 1014 help 1015 Say Y here if you want the debug print routines to direct 1016 their output to UART 0. The port must have been initialised 1017 by the boot-loader before use. 1018 1019 config DEBUG_S3C_UART1 1020 depends on PLAT_SAMSUNG 1021 select DEBUG_EXYNOS_UART if ARCH_EXYNOS 1022 select DEBUG_S3C24XX_UART if ARCH_S3C24XX 1023 select DEBUG_S3C64XX_UART if ARCH_S3C64XX 1024 select DEBUG_S5PV210_UART if ARCH_S5PV210 1025 bool "Use Samsung S3C UART 1 for low-level debug" 1026 help 1027 Say Y here if you want the debug print routines to direct 1028 their output to UART 1. The port must have been initialised 1029 by the boot-loader before use. 1030 1031 config DEBUG_S3C_UART2 1032 depends on PLAT_SAMSUNG 1033 select DEBUG_EXYNOS_UART if ARCH_EXYNOS 1034 select DEBUG_S3C24XX_UART if ARCH_S3C24XX 1035 select DEBUG_S3C64XX_UART if ARCH_S3C64XX 1036 select DEBUG_S5PV210_UART if ARCH_S5PV210 1037 bool "Use Samsung S3C UART 2 for low-level debug" 1038 help 1039 Say Y here if you want the debug print routines to direct 1040 their output to UART 2. The port must have been initialised 1041 by the boot-loader before use. 1042 1043 config DEBUG_S3C_UART3 1044 depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210) 1045 select DEBUG_EXYNOS_UART if ARCH_EXYNOS 1046 select DEBUG_S3C64XX_UART if ARCH_S3C64XX 1047 select DEBUG_S5PV210_UART if ARCH_S5PV210 1048 bool "Use Samsung S3C UART 3 for low-level debug" 1049 help 1050 Say Y here if you want the debug print routines to direct 1051 their output to UART 3. The port must have been initialised 1052 by the boot-loader before use. 1053 1054 config DEBUG_S3C2410_UART0 1055 depends on ARCH_S3C24XX 1056 select DEBUG_S3C2410_UART 1057 bool "Use S3C2410/S3C2412 UART 0 for low-level debug" 1058 help 1059 Say Y here if you want the debug print routines to direct 1060 their output to UART 0. The port must have been initialised 1061 by the boot-loader before use. 1062 1063 config DEBUG_S3C2410_UART1 1064 depends on ARCH_S3C24XX 1065 select DEBUG_S3C2410_UART 1066 bool "Use S3C2410/S3C2412 UART 1 for low-level debug" 1067 help 1068 Say Y here if you want the debug print routines to direct 1069 their output to UART 1. The port must have been initialised 1070 by the boot-loader before use. 1071 1072 config DEBUG_S3C2410_UART2 1073 depends on ARCH_S3C24XX 1074 select DEBUG_S3C2410_UART 1075 bool "Use S3C2410/S3C2412 UART 2 for low-level debug" 1076 help 1077 Say Y here if you want the debug print routines to direct 1078 their output to UART 2. The port must have been initialised 1079 by the boot-loader before use. 1080 1081 config DEBUG_SA1100 1082 depends on ARCH_SA1100 1083 bool "Use SA1100 UARTs for low-level debug" 1084 help 1085 Say Y here if you want kernel low-level debugging support 1086 on SA-11x0 UART ports. The kernel will check for the first 1087 enabled UART in a sequence 3-1-2. 1088 1089 config DEBUG_SOCFPGA_UART0 1090 depends on ARCH_SOCFPGA 1091 bool "Use SOCFPGA UART0 for low-level debug" 1092 select DEBUG_UART_8250 1093 help 1094 Say Y here if you want kernel low-level debugging support 1095 on SOCFPGA(Cyclone 5 and Arria 5) based platforms. 1096 1097 config DEBUG_SOCFPGA_ARRIA10_UART1 1098 depends on ARCH_SOCFPGA 1099 bool "Use SOCFPGA Arria10 UART1 for low-level debug" 1100 select DEBUG_UART_8250 1101 help 1102 Say Y here if you want kernel low-level debugging support 1103 on SOCFPGA(Arria 10) based platforms. 1104 1105 config DEBUG_SOCFPGA_CYCLONE5_UART1 1106 depends on ARCH_SOCFPGA 1107 bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug" 1108 select DEBUG_UART_8250 1109 help 1110 Say Y here if you want kernel low-level debugging support 1111 on SOCFPGA(Cyclone 5 and Arria 5) based platforms. 1112 1113 config DEBUG_SUN9I_UART0 1114 bool "Kernel low-level debugging messages via sun9i UART0" 1115 depends on MACH_SUN9I 1116 select DEBUG_UART_8250 1117 help 1118 Say Y here if you want kernel low-level debugging support 1119 on Allwinner A80 based platforms on the UART0. 1120 1121 config DEBUG_SUNXI_UART0 1122 bool "Kernel low-level debugging messages via sunXi UART0" 1123 depends on ARCH_SUNXI 1124 select DEBUG_UART_8250 1125 help 1126 Say Y here if you want kernel low-level debugging support 1127 on Allwinner A1X based platforms on the UART0. 1128 1129 config DEBUG_SUNXI_UART1 1130 bool "Kernel low-level debugging messages via sunXi UART1" 1131 depends on ARCH_SUNXI 1132 select DEBUG_UART_8250 1133 help 1134 Say Y here if you want kernel low-level debugging support 1135 on Allwinner A1X based platforms on the UART1. 1136 1137 config DEBUG_SUNXI_R_UART 1138 bool "Kernel low-level debugging messages via sunXi R_UART" 1139 depends on MACH_SUN6I || MACH_SUN8I 1140 select DEBUG_UART_8250 1141 help 1142 Say Y here if you want kernel low-level debugging support 1143 on Allwinner A31/A23 based platforms on the R_UART. 1144 1145 config DEBUG_SIRFPRIMA2_UART1 1146 bool "Kernel low-level debugging messages via SiRFprimaII UART1" 1147 depends on ARCH_PRIMA2 1148 select DEBUG_SIRFSOC_UART 1149 help 1150 Say Y here if you want the debug print routines to direct 1151 their output to the uart1 port on SiRFprimaII devices. 1152 1153 config DEBUG_SIRFATLAS7_UART0 1154 bool "Kernel low-level debugging messages via SiRFatlas7 UART0" 1155 depends on ARCH_ATLAS7 1156 select DEBUG_SIRFSOC_UART 1157 help 1158 Say Y here if you want the debug print routines to direct 1159 their output to the uart0 port on SiRFATLAS7 devices.The uart0 1160 is used on SiRFATLAS7 as a extra debug port.sometimes an extra 1161 debug port can be very useful. 1162 1163 config DEBUG_SIRFATLAS7_UART1 1164 bool "Kernel low-level debugging messages via SiRFatlas7 UART1" 1165 depends on ARCH_ATLAS7 1166 select DEBUG_SIRFSOC_UART 1167 help 1168 Say Y here if you want the debug print routines to direct 1169 their output to the uart1 port on SiRFATLAS7 devices. 1170 1171 config DEBUG_SPEAR3XX 1172 bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART" 1173 depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX 1174 select DEBUG_UART_PL01X 1175 help 1176 Say Y here if you want kernel low-level debugging support 1177 on ST SPEAr based platforms. 1178 1179 config DEBUG_SPEAR13XX 1180 bool "Kernel low-level debugging messages via ST SPEAr 13xx UART" 1181 depends on ARCH_SPEAR13XX 1182 select DEBUG_UART_PL01X 1183 help 1184 Say Y here if you want kernel low-level debugging support 1185 on ST SPEAr13xx based platforms. 1186 1187 config STIH41X_DEBUG_ASC2 1188 bool "Use StiH415/416 ASC2 UART for low-level debug" 1189 depends on ARCH_STI 1190 select DEBUG_STI_UART 1191 help 1192 Say Y here if you want kernel low-level debugging support 1193 on STiH415/416 based platforms like b2000, which has 1194 default UART wired up to ASC2. 1195 1196 If unsure, say N. 1197 1198 config STIH41X_DEBUG_SBC_ASC1 1199 bool "Use StiH415/416 SBC ASC1 UART for low-level debug" 1200 depends on ARCH_STI 1201 select DEBUG_STI_UART 1202 help 1203 Say Y here if you want kernel low-level debugging support 1204 on STiH415/416 based platforms like b2020. which has 1205 default UART wired up to SBC ASC1. 1206 1207 If unsure, say N. 1208 1209 config STM32F4_DEBUG_UART 1210 bool "Use STM32F4 UART for low-level debug" 1211 depends on MACH_STM32F429 || MACH_STM32F469 1212 select DEBUG_STM32_UART 1213 help 1214 Say Y here if you want kernel low-level debugging support 1215 on STM32F4 based platforms, which default UART is wired on 1216 USART1, but another UART instance can be selected by modifying 1217 CONFIG_DEBUG_UART_PHYS. 1218 1219 If unsure, say N. 1220 1221 config STM32F7_DEBUG_UART 1222 bool "Use STM32F7 UART for low-level debug" 1223 depends on MACH_STM32F746 || MACH_STM32F769 1224 select DEBUG_STM32_UART 1225 help 1226 Say Y here if you want kernel low-level debugging support 1227 on STM32F7 based platforms, which default UART is wired on 1228 USART1, but another UART instance can be selected by modifying 1229 CONFIG_DEBUG_UART_PHYS. 1230 1231 If unsure, say N. 1232 1233 config STM32H7_DEBUG_UART 1234 bool "Use STM32H7 UART for low-level debug" 1235 depends on MACH_STM32H743 1236 select DEBUG_STM32_UART 1237 help 1238 Say Y here if you want kernel low-level debugging support 1239 on STM32H7 based platforms, which default UART is wired on 1240 USART1, but another UART instance can be selected by modifying 1241 CONFIG_DEBUG_UART_PHYS. 1242 1243 If unsure, say N. 1244 1245 config STM32MP1_DEBUG_UART 1246 bool "Use STM32MP1 UART for low-level debug" 1247 depends on MACH_STM32MP157 1248 select DEBUG_STM32_UART 1249 help 1250 Say Y here if you want kernel low-level debugging support 1251 on STM32MP1 based platforms, wich default UART is wired on 1252 UART4, but another UART instance can be selected by modifying 1253 CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT. 1254 1255 If unsure, say N. 1256 1257 config TEGRA_DEBUG_UART_AUTO_ODMDATA 1258 bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" 1259 depends on ARCH_TEGRA 1260 select DEBUG_TEGRA_UART 1261 help 1262 Automatically determines which UART to use for low-level 1263 debug based on the ODMDATA value. This value is part of 1264 the BCT, and is written to the boot memory device using 1265 nvflash, or other flashing tool. When bits 19:18 are 3, 1266 then bits 17:15 indicate which UART to use; 0/1/2/3/4 1267 are UART A/B/C/D/E. 1268 1269 config TEGRA_DEBUG_UARTA 1270 bool "Kernel low-level debugging messages via Tegra UART A" 1271 depends on ARCH_TEGRA 1272 select DEBUG_TEGRA_UART 1273 help 1274 Say Y here if you want kernel low-level debugging support 1275 on Tegra based platforms. 1276 1277 config TEGRA_DEBUG_UARTB 1278 bool "Kernel low-level debugging messages via Tegra UART B" 1279 depends on ARCH_TEGRA 1280 select DEBUG_TEGRA_UART 1281 help 1282 Say Y here if you want kernel low-level debugging support 1283 on Tegra based platforms. 1284 1285 config TEGRA_DEBUG_UARTC 1286 bool "Kernel low-level debugging messages via Tegra UART C" 1287 depends on ARCH_TEGRA 1288 select DEBUG_TEGRA_UART 1289 help 1290 Say Y here if you want kernel low-level debugging support 1291 on Tegra based platforms. 1292 1293 config TEGRA_DEBUG_UARTD 1294 bool "Kernel low-level debugging messages via Tegra UART D" 1295 depends on ARCH_TEGRA 1296 select DEBUG_TEGRA_UART 1297 help 1298 Say Y here if you want kernel low-level debugging support 1299 on Tegra based platforms. 1300 1301 config TEGRA_DEBUG_UARTE 1302 bool "Kernel low-level debugging messages via Tegra UART E" 1303 depends on ARCH_TEGRA 1304 select DEBUG_TEGRA_UART 1305 help 1306 Say Y here if you want kernel low-level debugging support 1307 on Tegra based platforms. 1308 1309 config DEBUG_U300_UART 1310 bool "Kernel low-level debugging messages via U300 UART0" 1311 depends on ARCH_U300 1312 select DEBUG_UART_PL01X 1313 help 1314 Say Y here if you want the debug print routines to direct 1315 their output to the uart port on U300 devices. 1316 1317 config DEBUG_UX500_UART 1318 depends on ARCH_U8500 1319 bool "Use Ux500 UART for low-level debug" 1320 help 1321 Say Y here if you want kernel low-level debugging support 1322 on Ux500 based platforms. 1323 1324 config DEBUG_VERSATILE 1325 bool "Kernel low-level debugging messages via ARM Versatile UART" 1326 depends on ARCH_VERSATILE 1327 select DEBUG_UART_PL01X 1328 help 1329 Say Y here if you want kernel low-level debugging support 1330 on ARM Versatile platforms. 1331 1332 config DEBUG_VEXPRESS_UART0_DETECT 1333 bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" 1334 depends on ARCH_VEXPRESS && CPU_CP15_MMU 1335 help 1336 This option enables a simple heuristic which tries to determine 1337 the motherboard's memory map variant (original or RS1) and then 1338 choose the relevant UART0 base address. 1339 1340 Note that this will only work with standard A-class core tiles, 1341 and may fail with non-standard SMM or custom software models. 1342 1343 config DEBUG_VEXPRESS_UART0_CA9 1344 bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" 1345 depends on ARCH_VEXPRESS 1346 select DEBUG_UART_PL01X 1347 help 1348 This option selects UART0 at 0x10009000. Except for custom models, 1349 this applies only to the V2P-CA9 tile. 1350 1351 config DEBUG_VEXPRESS_UART0_RS1 1352 bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" 1353 depends on ARCH_VEXPRESS 1354 select DEBUG_UART_PL01X 1355 help 1356 This option selects UART0 at 0x1c090000. This applies to most 1357 of the tiles using the RS1 memory map, including all new A-class 1358 core tiles, FPGA-based SMMs and software models. 1359 1360 config DEBUG_VEXPRESS_UART0_CRX 1361 bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)" 1362 depends on ARCH_VEXPRESS && !MMU 1363 select DEBUG_UART_PL01X 1364 help 1365 This option selects UART0 at 0xb0090000. This is appropriate for 1366 Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7 1367 1368 config DEBUG_VF_UART 1369 bool "Vybrid UART" 1370 depends on SOC_VF610 1371 help 1372 Say Y here if you want kernel low-level debugging support 1373 on Vybrid based platforms. 1374 1375 config DEBUG_VT8500_UART0 1376 bool "Use UART0 on VIA/Wondermedia SoCs" 1377 depends on ARCH_VT8500 1378 help 1379 This option selects UART0 on VIA/Wondermedia System-on-a-chip 1380 devices, including VT8500, WM8505, WM8650 and WM8850. 1381 1382 config DEBUG_ZTE_ZX 1383 bool "Use ZTE ZX UART" 1384 select DEBUG_UART_PL01X 1385 depends on ARCH_ZX 1386 help 1387 Say Y here if you are enabling ZTE ZX296702 SOC and need 1388 debug uart support. 1389 1390 This option is preferred over the platform specific 1391 options; the platform specific options are deprecated 1392 and will be soon removed. 1393 1394 config DEBUG_ZYNQ_UART0 1395 bool "Kernel low-level debugging on Xilinx Zynq using UART0" 1396 depends on ARCH_ZYNQ 1397 help 1398 Say Y here if you want the debug print routines to direct 1399 their output to UART0 on the Zynq platform. 1400 1401 config DEBUG_ZYNQ_UART1 1402 bool "Kernel low-level debugging on Xilinx Zynq using UART1" 1403 depends on ARCH_ZYNQ 1404 help 1405 Say Y here if you want the debug print routines to direct 1406 their output to UART1 on the Zynq platform. 1407 1408 If you have a ZC702 board and want early boot messages to 1409 appear on the USB serial adaptor, select this option. 1410 1411 config DEBUG_ICEDCC 1412 bool "Kernel low-level debugging via EmbeddedICE DCC channel" 1413 help 1414 Say Y here if you want the debug print routines to direct 1415 their output to the EmbeddedICE macrocell's DCC channel using 1416 co-processor 14. This is known to work on the ARM9 style ICE 1417 channel and on the XScale with the PEEDI. 1418 1419 Note that the system will appear to hang during boot if there 1420 is nothing connected to read from the DCC. 1421 1422 config DEBUG_SEMIHOSTING 1423 bool "Kernel low-level debug output via semihosting I/O" 1424 help 1425 Semihosting enables code running on an ARM target to use 1426 the I/O facilities on a host debugger/emulator through a 1427 simple SVC call. The host debugger or emulator must have 1428 semihosting enabled for the special svc call to be trapped 1429 otherwise the kernel will crash. 1430 1431 This is known to work with OpenOCD, as well as 1432 ARM's Fast Models, or any other controlling environment 1433 that implements semihosting. 1434 1435 For more details about semihosting, please see 1436 chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. 1437 1438 config DEBUG_LL_UART_8250 1439 bool "Kernel low-level debugging via 8250 UART" 1440 help 1441 Say Y here if you wish the debug print routes to direct 1442 their output to an 8250 UART. You can use this option 1443 to provide the parameters for the 8250 UART rather than 1444 selecting one of the platform specific options above if 1445 you know the parameters for the port. 1446 1447 This option is preferred over the platform specific 1448 options; the platform specific options are deprecated 1449 and will be soon removed. 1450 1451 config DEBUG_LL_UART_EFM32 1452 bool "Kernel low-level debugging via efm32 UART" 1453 depends on ARCH_EFM32 1454 help 1455 Say Y here if you want the debug print routines to direct 1456 their output to an UART or USART port on efm32 based 1457 machines. Use the following addresses for DEBUG_UART_PHYS: 1458 1459 0x4000c000 | USART0 1460 0x4000c400 | USART1 1461 0x4000c800 | USART2 1462 0x4000e000 | UART0 1463 0x4000e400 | UART1 1464 1465 config DEBUG_LL_UART_PL01X 1466 bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART" 1467 help 1468 Say Y here if you wish the debug print routes to direct 1469 their output to a PL01x Primecell UART. You can use 1470 this option to provide the parameters for the UART 1471 rather than selecting one of the platform specific 1472 options above if you know the parameters for the port. 1473 1474 This option is preferred over the platform specific 1475 options; the platform specific options are deprecated 1476 and will be soon removed. 1477 1478endchoice 1479 1480config DEBUG_AT91_UART 1481 bool 1482 depends on ARCH_AT91 1483 1484config DEBUG_EXYNOS_UART 1485 bool 1486 1487config DEBUG_S3C2410_UART 1488 bool 1489 select DEBUG_S3C24XX_UART 1490 1491config DEBUG_S3C24XX_UART 1492 bool 1493 1494config DEBUG_S3C64XX_UART 1495 bool 1496 1497config DEBUG_S5PV210_UART 1498 bool 1499 1500config DEBUG_OMAP2PLUS_UART 1501 bool 1502 depends on ARCH_OMAP2PLUS 1503 1504config DEBUG_IMX_UART_PORT 1505 int "i.MX Debug UART Port Selection" 1506 depends on DEBUG_IMX1_UART || \ 1507 DEBUG_IMX25_UART || \ 1508 DEBUG_IMX21_IMX27_UART || \ 1509 DEBUG_IMX31_UART || \ 1510 DEBUG_IMX35_UART || \ 1511 DEBUG_IMX50_UART || \ 1512 DEBUG_IMX51_UART || \ 1513 DEBUG_IMX53_UART || \ 1514 DEBUG_IMX6Q_UART || \ 1515 DEBUG_IMX6SL_UART || \ 1516 DEBUG_IMX6SX_UART || \ 1517 DEBUG_IMX6UL_UART || \ 1518 DEBUG_IMX7D_UART 1519 default 1 1520 help 1521 Choose UART port on which kernel low-level debug messages 1522 should be output. 1523 1524config DEBUG_VF_UART_PORT 1525 int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART 1526 default 1 1527 range 0 3 1528 depends on SOC_VF610 1529 help 1530 Choose UART port on which kernel low-level debug messages 1531 should be output. 1532 1533config DEBUG_TEGRA_UART 1534 bool 1535 depends on ARCH_TEGRA 1536 1537config DEBUG_STI_UART 1538 bool 1539 depends on ARCH_STI 1540 1541config DEBUG_STM32_UART 1542 bool 1543 depends on ARCH_STM32 1544 1545config DEBUG_SIRFSOC_UART 1546 bool 1547 depends on ARCH_SIRF 1548 1549config DEBUG_LL_INCLUDE 1550 string 1551 default "debug/sa1100.S" if DEBUG_SA1100 1552 default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP 1553 default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 1554 default "debug/at91.S" if DEBUG_AT91_UART 1555 default "debug/asm9260.S" if DEBUG_ASM9260_UART 1556 default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 1557 default "debug/dc21285.S" if DEBUG_DC21285_PORT 1558 default "debug/meson.S" if DEBUG_MESON_UARTAO 1559 default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X 1560 default "debug/exynos.S" if DEBUG_EXYNOS_UART 1561 default "debug/efm32.S" if DEBUG_LL_UART_EFM32 1562 default "debug/icedcc.S" if DEBUG_ICEDCC 1563 default "debug/imx.S" if DEBUG_IMX1_UART || \ 1564 DEBUG_IMX25_UART || \ 1565 DEBUG_IMX21_IMX27_UART || \ 1566 DEBUG_IMX31_UART || \ 1567 DEBUG_IMX35_UART || \ 1568 DEBUG_IMX50_UART || \ 1569 DEBUG_IMX51_UART || \ 1570 DEBUG_IMX53_UART ||\ 1571 DEBUG_IMX6Q_UART || \ 1572 DEBUG_IMX6SL_UART || \ 1573 DEBUG_IMX6SX_UART || \ 1574 DEBUG_IMX6UL_UART || \ 1575 DEBUG_IMX7D_UART 1576 default "debug/msm.S" if DEBUG_QCOM_UARTDM 1577 default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART 1578 default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 1579 default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2 1580 default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4 1581 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0 1582 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2 1583 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0 1584 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1 1585 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2 1586 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4 1587 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2 1588 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0 1589 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1 1590 default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4 1591 default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART || DEBUG_S3C64XX_UART 1592 default "debug/s5pv210.S" if DEBUG_S5PV210_UART 1593 default "debug/sirf.S" if DEBUG_SIRFSOC_UART 1594 default "debug/sti.S" if DEBUG_STI_UART 1595 default "debug/stm32.S" if DEBUG_STM32_UART 1596 default "debug/tegra.S" if DEBUG_TEGRA_UART 1597 default "debug/ux500.S" if DEBUG_UX500_UART 1598 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT 1599 default "debug/vf.S" if DEBUG_VF_UART 1600 default "debug/vt8500.S" if DEBUG_VT8500_UART0 1601 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 1602 default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART 1603 default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0 1604 default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART 1605 default "mach/debug-macro.S" 1606 1607# Compatibility options for PL01x 1608config DEBUG_UART_PL01X 1609 bool 1610 1611# Compatibility options for 8250 1612config DEBUG_UART_8250 1613 def_bool ARCH_EBSA110 || ARCH_IOP32X || ARCH_IXP4XX || ARCH_RPC 1614 1615config DEBUG_UART_PHYS 1616 hex "Physical base address of debug UART" 1617 default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 1618 default 0x01c28000 if DEBUG_SUNXI_UART0 1619 default 0x01c28400 if DEBUG_SUNXI_UART1 1620 default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 1621 default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2 1622 default 0x01f02800 if DEBUG_SUNXI_R_UART 1623 default 0x02530c00 if DEBUG_KEYSTONE_UART0 1624 default 0x02531000 if DEBUG_KEYSTONE_UART1 1625 default 0x03010fe0 if ARCH_RPC 1626 default 0x07000000 if DEBUG_SUN9I_UART0 1627 default 0x09405000 if DEBUG_ZTE_ZX 1628 default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ 1629 DEBUG_VEXPRESS_UART0_CA9 1630 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT 1631 default 0x10124000 if DEBUG_RK3X_UART0 1632 default 0x10126000 if DEBUG_RK3X_UART1 1633 default 0x101f1000 if DEBUG_VERSATILE 1634 default 0x101fb000 if DEBUG_NOMADIK_UART 1635 default 0x10210000 if DEBUG_RV1108_UART2 1636 default 0x10220000 if DEBUG_RV1108_UART1 1637 default 0x10230000 if DEBUG_RV1108_UART0 1638 default 0x11002000 if DEBUG_MT8127_UART0 1639 default 0x11006000 if DEBUG_MT6589_UART0 1640 default 0x11009000 if DEBUG_MT8135_UART3 1641 default 0x16000000 if DEBUG_INTEGRATOR 1642 default 0x18000300 if DEBUG_BCM_5301X 1643 default 0x18000400 if DEBUG_BCM_HR2 1644 default 0x18010000 if DEBUG_SIRFATLAS7_UART0 1645 default 0x18020000 if DEBUG_SIRFATLAS7_UART1 1646 default 0x18023000 if DEBUG_BCM_IPROC_UART3 1647 default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 1648 default 0x20001000 if DEBUG_HIP01_UART 1649 default 0x20060000 if DEBUG_RK29_UART0 1650 default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 1651 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 1652 default 0x20201000 if DEBUG_BCM2835 1653 default 0x3e000000 if DEBUG_BCM_KONA_UART 1654 default 0x3f201000 if DEBUG_BCM2836 1655 default 0x4000e400 if DEBUG_LL_UART_EFM32 1656 default 0x40010000 if STM32MP1_DEBUG_UART 1657 default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \ 1658 STM32H7_DEBUG_UART 1659 default 0x40028000 if DEBUG_AT91_SAMV7_USART1 1660 default 0x40081000 if DEBUG_LPC18XX_UART0 1661 default 0x40090000 if DEBUG_LPC32XX 1662 default 0x40100000 if DEBUG_PXA_UART1 1663 default 0x42000000 if DEBUG_GEMINI 1664 default 0x44e09000 if DEBUG_AM33XXUART1 1665 default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 1666 default 0x48022000 if DEBUG_TI81XXUART2 1667 default 0x48024000 if DEBUG_TI81XXUART3 1668 default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \ 1669 DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1 1670 default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \ 1671 DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2 1672 default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 1673 default 0x49020000 if DEBUG_OMAP3UART3 1674 default 0x49042000 if DEBUG_OMAP3UART4 1675 default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ 1676 DEBUG_S3C2410_UART0) 1677 default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ 1678 DEBUG_S3C2410_UART1) 1679 default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ 1680 DEBUG_S3C2410_UART2) 1681 default 0x78000000 if DEBUG_CNS3XXX 1682 default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1 1683 default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 1684 default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 1685 default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 1686 default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 1687 default 0x80010000 if DEBUG_ASM9260_UART 1688 default 0x80070000 if DEBUG_IMX23_UART 1689 default 0x80074000 if DEBUG_IMX28_UART 1690 default 0x80230000 if DEBUG_PICOXCELL_UART 1691 default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX 1692 default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART 1693 default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1 1694 default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX 1695 default 0xc0013000 if DEBUG_U300_UART 1696 default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN 1697 default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN 1698 default 0xd0000000 if DEBUG_SPEAR3XX 1699 default 0xd0012000 if DEBUG_MVEBU_UART0 1700 default 0xc81004c0 if DEBUG_MESON_UARTAO 1701 default 0xd4017000 if DEBUG_MMP_UART2 1702 default 0xd4018000 if DEBUG_MMP_UART3 1703 default 0xe0000000 if DEBUG_SPEAR13XX 1704 default 0xe4007000 if DEBUG_HIP04_UART 1705 default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0 1706 default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1 1707 default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2 1708 default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4 1709 default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2 1710 default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0 1711 default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1 1712 default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4 1713 default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2 1714 default 0xe8009000 if DEBUG_R7S9210_SCIF4 1715 default 0xf0000000 if DEBUG_DIGICOLOR_UA0 1716 default 0xf0000be0 if ARCH_EBSA110 1717 default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE 1718 default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE 1719 default 0xf7fc9000 if DEBUG_BERLIN_UART 1720 default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1 1721 default 0xf8b00000 if DEBUG_HIX5HD2_UART 1722 default 0xf991e000 if DEBUG_QCOM_UARTDM 1723 default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3 1724 default 0xfcb00000 if DEBUG_HI3620_UART 1725 default 0xfd883000 if DEBUG_ALPINE_UART0 1726 default 0xfe800000 if ARCH_IOP32X 1727 default 0xff690000 if DEBUG_RK32_UART2 1728 default 0xffc02000 if DEBUG_SOCFPGA_UART0 1729 default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1 1730 default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 1731 default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 1732 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 1733 default 0xfff36000 if DEBUG_HIGHBANK_UART 1734 default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 1735 default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 1736 default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 1737 default 0xfffe8600 if DEBUG_BCM63XX_UART 1738 default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU 1739 default 0xfffff200 if DEBUG_AT91_RM9200_DBGU 1740 depends on ARCH_EP93XX || \ 1741 DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ 1742 DEBUG_LL_UART_EFM32 || \ 1743 DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ 1744 DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ 1745 DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \ 1746 DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ 1747 DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \ 1748 DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \ 1749 DEBUG_RCAR_GEN2_SCIFA2 || \ 1750 DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \ 1751 DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \ 1752 DEBUG_S3C64XX_UART || \ 1753 DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ 1754 DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ 1755 DEBUG_AT91_UART || DEBUG_STM32_UART 1756 1757config DEBUG_UART_VIRT 1758 hex "Virtual base address of debug UART" 1759 default 0xc881f000 if DEBUG_RV1108_UART2 1760 default 0xc8821000 if DEBUG_RV1108_UART1 1761 default 0xc8912000 if DEBUG_RV1108_UART0 1762 default 0xe0010fe0 if ARCH_RPC 1763 default 0xf0000be0 if ARCH_EBSA110 1764 default 0xf0010000 if DEBUG_ASM9260_UART 1765 default 0xf0100000 if DEBUG_DIGICOLOR_UA0 1766 default 0xf01fb000 if DEBUG_NOMADIK_UART 1767 default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 1768 default 0xf1000300 if DEBUG_BCM_5301X 1769 default 0xf1000400 if DEBUG_BCM_HR2 1770 default 0xf1002000 if DEBUG_MT8127_UART0 1771 default 0xf1006000 if DEBUG_MT6589_UART0 1772 default 0xf1009000 if DEBUG_MT8135_UART3 1773 default 0xf1023000 if DEBUG_BCM_IPROC_UART3 1774 default 0xf11f1000 if DEBUG_VERSATILE 1775 default 0xf1600000 if DEBUG_INTEGRATOR 1776 default 0xf1c28000 if DEBUG_SUNXI_UART0 1777 default 0xf1c28400 if DEBUG_SUNXI_UART1 1778 default 0xf1f02800 if DEBUG_SUNXI_R_UART 1779 default 0xf31004c0 if DEBUG_MESON_UARTAO 1780 default 0xf4090000 if DEBUG_LPC32XX 1781 default 0xf4200000 if DEBUG_GEMINI 1782 default 0xf6200000 if DEBUG_PXA_UART1 1783 default 0xf7000000 if DEBUG_SUN9I_UART0 1784 default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0 1785 default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ 1786 DEBUG_S3C2410_UART0) 1787 default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1 1788 default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2 1789 default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3 1790 default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ 1791 DEBUG_S3C2410_UART1) 1792 default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ 1793 DEBUG_S3C2410_UART2) 1794 default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1 1795 default 0xf7fc9000 if DEBUG_BERLIN_UART 1796 default 0xf8007000 if DEBUG_HIP04_UART 1797 default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 1798 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 1799 default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU 1800 default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU 1801 default 0xf9e09000 if DEBUG_AM33XXUART1 1802 default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1 1803 default 0xfa022000 if DEBUG_TI81XXUART2 1804 default 0xfa024000 if DEBUG_TI81XXUART3 1805 default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \ 1806 DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1 1807 default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \ 1808 DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2 1809 default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4 1810 default 0xfa71e000 if DEBUG_QCOM_UARTDM 1811 default 0xfb002000 if DEBUG_CNS3XXX 1812 default 0xfb009000 if DEBUG_REALVIEW_STD_PORT 1813 default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3 1814 default 0xfb020000 if DEBUG_OMAP3UART3 1815 default 0xfb042000 if DEBUG_OMAP3UART4 1816 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT 1817 default 0xfc705000 if DEBUG_ZTE_ZX 1818 default 0xfcfe8600 if DEBUG_BCM63XX_UART 1819 default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX 1820 default 0xfd883000 if DEBUG_ALPINE_UART0 1821 default 0xfe010000 if STM32MP1_DEBUG_UART 1822 default 0xfe017000 if DEBUG_MMP_UART2 1823 default 0xfe018000 if DEBUG_MMP_UART3 1824 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART 1825 default 0xfe230000 if DEBUG_PICOXCELL_UART 1826 default 0xfe300000 if DEBUG_BCM_KONA_UART 1827 default 0xfe800000 if ARCH_IOP32X 1828 default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART 1829 default 0xfeb24000 if DEBUG_RK3X_UART0 1830 default 0xfeb26000 if DEBUG_RK3X_UART1 1831 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 1832 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 1833 default 0xfec02000 if DEBUG_SOCFPGA_UART0 1834 default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1 1835 default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1 1836 default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE 1837 default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE 1838 default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 1839 default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 1840 default 0xfec20000 if DEBUG_SIRFATLAS7_UART1 1841 default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1 1842 default 0xfec90000 if DEBUG_RK32_UART2 1843 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 1844 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 1845 default 0xfed60000 if DEBUG_RK29_UART0 1846 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 1847 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 1848 default 0xfedc0000 if DEBUG_EP93XX 1849 default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1 1850 default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART 1851 default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN 1852 default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN 1853 default 0xfef36000 if DEBUG_HIGHBANK_UART 1854 default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1 1855 default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 1856 default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 1857 default 0xff003000 if DEBUG_U300_UART 1858 default 0xffd01000 if DEBUG_HIP01_UART 1859 default DEBUG_UART_PHYS if !MMU 1860 depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ 1861 DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ 1862 DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ 1863 DEBUG_S3C64XX_UART || \ 1864 DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ 1865 DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ 1866 DEBUG_AT91_UART || DEBUG_STM32_UART 1867 1868config DEBUG_UART_8250_SHIFT 1869 int "Register offset shift for the 8250 debug UART" 1870 depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 1871 default 0 if DEBUG_FOOTBRIDGE_COM1 || ARCH_IOP32X || DEBUG_BCM_5301X || \ 1872 DEBUG_BCM_HR2 || DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || \ 1873 DEBUG_OMAP7XXUART3 1874 default 2 1875 1876config DEBUG_UART_8250_WORD 1877 bool "Use 32-bit accesses for 8250 UART" 1878 depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 1879 depends on DEBUG_UART_8250_SHIFT >= 2 1880 default y if DEBUG_PICOXCELL_UART || \ 1881 DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \ 1882 DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \ 1883 DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \ 1884 DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ 1885 DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_BCM_IPROC_UART3 || \ 1886 DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 1887 1888config DEBUG_UART_8250_PALMCHIP 1889 bool "8250 UART is Palmchip BK-310x" 1890 depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 1891 help 1892 Palmchip provides a UART implementation compatible with 16550 1893 except for having a different register layout. Say Y here if 1894 the debug UART is of this type. 1895 1896config DEBUG_UART_8250_FLOW_CONTROL 1897 bool "Enable flow control for 8250 UART" 1898 depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 1899 default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC 1900 1901config DEBUG_UNCOMPRESS 1902 bool "Enable decompressor debugging via DEBUG_LL output" 1903 depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M 1904 depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ 1905 (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \ 1906 !DEBUG_BRCMSTB_UART 1907 help 1908 This option influences the normal decompressor output for 1909 multiplatform kernels. Normally, multiplatform kernels disable 1910 decompressor output because it is not possible to know where to 1911 send the decompressor output. 1912 1913 When this option is set, the selected DEBUG_LL output method 1914 will be re-used for normal decompressor output on multiplatform 1915 kernels. 1916 1917 1918config UNCOMPRESS_INCLUDE 1919 string 1920 default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ 1921 PLAT_SAMSUNG || ARM_SINGLE_ARMV7M 1922 default "mach/uncompress.h" 1923 1924config EARLY_PRINTK 1925 bool "Early printk" 1926 depends on DEBUG_LL 1927 help 1928 Say Y here if you want to have an early console using the 1929 kernel low-level debugging functions. Add earlyprintk to your 1930 kernel parameters to enable this console. 1931 1932config ARM_KPROBES_TEST 1933 tristate "Kprobes test module" 1934 depends on KPROBES && MODULES 1935 help 1936 Perform tests of kprobes API and instruction set simulation. 1937 1938config PID_IN_CONTEXTIDR 1939 bool "Write the current PID to the CONTEXTIDR register" 1940 depends on CPU_COPY_V6 1941 help 1942 Enabling this option causes the kernel to write the current PID to 1943 the PROCID field of the CONTEXTIDR register, at the expense of some 1944 additional instructions during context switch. Say Y here only if you 1945 are planning to use hardware trace tools with this kernel. 1946 1947source "drivers/hwtracing/coresight/Kconfig" 1948