xref: /openbmc/linux/arch/arc/mm/init.c (revision a8da474e)
1 /*
2  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  */
8 
9 #include <linux/kernel.h>
10 #include <linux/mm.h>
11 #include <linux/bootmem.h>
12 #include <linux/memblock.h>
13 #ifdef CONFIG_BLK_DEV_INITRD
14 #include <linux/initrd.h>
15 #endif
16 #include <linux/swap.h>
17 #include <linux/module.h>
18 #include <linux/highmem.h>
19 #include <asm/page.h>
20 #include <asm/pgalloc.h>
21 #include <asm/sections.h>
22 #include <asm/arcregs.h>
23 
24 pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
25 char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
26 EXPORT_SYMBOL(empty_zero_page);
27 
28 static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
29 static unsigned long low_mem_sz;
30 
31 #ifdef CONFIG_HIGHMEM
32 static unsigned long min_high_pfn;
33 static u64 high_mem_start;
34 static u64 high_mem_sz;
35 #endif
36 
37 /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
38 static int __init setup_mem_sz(char *str)
39 {
40 	low_mem_sz = memparse(str, NULL) & PAGE_MASK;
41 
42 	/* early console might not be setup yet - it will show up later */
43 	pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
44 
45 	return 0;
46 }
47 early_param("mem", setup_mem_sz);
48 
49 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
50 {
51 	int in_use = 0;
52 
53 	if (!low_mem_sz) {
54 		BUG_ON(base != low_mem_start);
55 		low_mem_sz = size;
56 		in_use = 1;
57 	} else {
58 #ifdef CONFIG_HIGHMEM
59 		high_mem_start = base;
60 		high_mem_sz = size;
61 		in_use = 1;
62 #endif
63 	}
64 
65 	pr_info("Memory @ %llx [%lldM] %s\n",
66 		base, TO_MB(size), !in_use ? "Not used":"");
67 }
68 
69 #ifdef CONFIG_BLK_DEV_INITRD
70 static int __init early_initrd(char *p)
71 {
72 	unsigned long start, size;
73 	char *endp;
74 
75 	start = memparse(p, &endp);
76 	if (*endp == ',') {
77 		size = memparse(endp + 1, NULL);
78 
79 		initrd_start = (unsigned long)__va(start);
80 		initrd_end = (unsigned long)__va(start + size);
81 	}
82 	return 0;
83 }
84 early_param("initrd", early_initrd);
85 #endif
86 
87 /*
88  * First memory setup routine called from setup_arch()
89  * 1. setup swapper's mm @init_mm
90  * 2. Count the pages we have and setup bootmem allocator
91  * 3. zone setup
92  */
93 void __init setup_arch_memory(void)
94 {
95 	unsigned long zones_size[MAX_NR_ZONES];
96 	unsigned long zones_holes[MAX_NR_ZONES];
97 
98 	init_mm.start_code = (unsigned long)_text;
99 	init_mm.end_code = (unsigned long)_etext;
100 	init_mm.end_data = (unsigned long)_edata;
101 	init_mm.brk = (unsigned long)_end;
102 
103 	/* first page of system - kernel .vector starts here */
104 	min_low_pfn = ARCH_PFN_OFFSET;
105 
106 	/* Last usable page of low mem */
107 	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
108 
109 #ifdef CONFIG_HIGHMEM
110 	min_high_pfn = PFN_DOWN(high_mem_start);
111 	max_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
112 #endif
113 
114 	max_mapnr = max_pfn - min_low_pfn;
115 
116 	/*------------- bootmem allocator setup -----------------------*/
117 
118 	/*
119 	 * seed the bootmem allocator after any DT memory node parsing or
120 	 * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
121 	 *
122 	 * Only low mem is added, otherwise we have crashes when allocating
123 	 * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
124 	 * avail memory, ending in highmem with a > 32-bit address. However
125 	 * it then tries to memset it with a truncaed 32-bit handle, causing
126 	 * the crash
127 	 */
128 
129 	memblock_add(low_mem_start, low_mem_sz);
130 	memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
131 
132 #ifdef CONFIG_BLK_DEV_INITRD
133 	if (initrd_start)
134 		memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
135 #endif
136 
137 	memblock_dump_all();
138 
139 	/*----------------- node/zones setup --------------------------*/
140 	memset(zones_size, 0, sizeof(zones_size));
141 	memset(zones_holes, 0, sizeof(zones_holes));
142 
143 	zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
144 	zones_holes[ZONE_NORMAL] = 0;
145 
146 #ifdef CONFIG_HIGHMEM
147 	zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
148 
149 	/* This handles the peripheral address space hole */
150 	zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn;
151 #endif
152 
153 	/*
154 	 * We can't use the helper free_area_init(zones[]) because it uses
155 	 * PAGE_OFFSET to compute the @min_low_pfn which would be wrong
156 	 * when our kernel doesn't start at PAGE_OFFSET, i.e.
157 	 * PAGE_OFFSET != CONFIG_LINUX_LINK_BASE
158 	 */
159 	free_area_init_node(0,			/* node-id */
160 			    zones_size,		/* num pages per zone */
161 			    min_low_pfn,	/* first pfn of node */
162 			    zones_holes);	/* holes */
163 
164 #ifdef CONFIG_HIGHMEM
165 	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
166 	kmap_init();
167 #endif
168 }
169 
170 /*
171  * mem_init - initializes memory
172  *
173  * Frees up bootmem
174  * Calculates and displays memory available/used
175  */
176 void __init mem_init(void)
177 {
178 #ifdef CONFIG_HIGHMEM
179 	unsigned long tmp;
180 
181 	reset_all_zones_managed_pages();
182 	for (tmp = min_high_pfn; tmp < max_pfn; tmp++)
183 		free_highmem_page(pfn_to_page(tmp));
184 #endif
185 
186 	free_all_bootmem();
187 	mem_init_print_info(NULL);
188 }
189 
190 /*
191  * free_initmem: Free all the __init memory.
192  */
193 void __init_refok free_initmem(void)
194 {
195 	free_initmem_default(-1);
196 }
197 
198 #ifdef CONFIG_BLK_DEV_INITRD
199 void __init free_initrd_mem(unsigned long start, unsigned long end)
200 {
201 	free_reserved_area((void *)start, (void *)end, -1, "initrd");
202 }
203 #endif
204