xref: /openbmc/linux/arch/arc/mm/init.c (revision 41e4b7dc)
1 /*
2  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  */
8 
9 #include <linux/kernel.h>
10 #include <linux/mm.h>
11 #include <linux/bootmem.h>
12 #include <linux/memblock.h>
13 #ifdef CONFIG_BLK_DEV_INITRD
14 #include <linux/initrd.h>
15 #endif
16 #include <linux/of_fdt.h>
17 #include <linux/swap.h>
18 #include <linux/module.h>
19 #include <linux/highmem.h>
20 #include <asm/page.h>
21 #include <asm/pgalloc.h>
22 #include <asm/sections.h>
23 #include <asm/arcregs.h>
24 
25 pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
26 char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
27 EXPORT_SYMBOL(empty_zero_page);
28 
29 static const unsigned long low_mem_start = CONFIG_LINUX_RAM_BASE;
30 static unsigned long low_mem_sz;
31 
32 #ifdef CONFIG_HIGHMEM
33 static unsigned long min_high_pfn, max_high_pfn;
34 static u64 high_mem_start;
35 static u64 high_mem_sz;
36 #endif
37 
38 #ifdef CONFIG_DISCONTIGMEM
39 struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
40 EXPORT_SYMBOL(node_data);
41 #endif
42 
43 long __init arc_get_mem_sz(void)
44 {
45 	return low_mem_sz;
46 }
47 
48 /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
49 static int __init setup_mem_sz(char *str)
50 {
51 	low_mem_sz = memparse(str, NULL) & PAGE_MASK;
52 
53 	/* early console might not be setup yet - it will show up later */
54 	pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
55 
56 	return 0;
57 }
58 early_param("mem", setup_mem_sz);
59 
60 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
61 {
62 	int in_use = 0;
63 
64 	if (!low_mem_sz) {
65 		if (base != low_mem_start)
66 			panic("CONFIG_LINUX_RAM_BASE != DT memory { }");
67 
68 		low_mem_sz = size;
69 		in_use = 1;
70 	} else {
71 #ifdef CONFIG_HIGHMEM
72 		high_mem_start = base;
73 		high_mem_sz = size;
74 		in_use = 1;
75 #endif
76 	}
77 
78 	pr_info("Memory @ %llx [%lldM] %s\n",
79 		base, TO_MB(size), !in_use ? "Not used":"");
80 }
81 
82 #ifdef CONFIG_BLK_DEV_INITRD
83 static int __init early_initrd(char *p)
84 {
85 	unsigned long start, size;
86 	char *endp;
87 
88 	start = memparse(p, &endp);
89 	if (*endp == ',') {
90 		size = memparse(endp + 1, NULL);
91 
92 		initrd_start = (unsigned long)__va(start);
93 		initrd_end = (unsigned long)__va(start + size);
94 	}
95 	return 0;
96 }
97 early_param("initrd", early_initrd);
98 #endif
99 
100 /*
101  * First memory setup routine called from setup_arch()
102  * 1. setup swapper's mm @init_mm
103  * 2. Count the pages we have and setup bootmem allocator
104  * 3. zone setup
105  */
106 void __init setup_arch_memory(void)
107 {
108 	unsigned long zones_size[MAX_NR_ZONES];
109 	unsigned long zones_holes[MAX_NR_ZONES];
110 
111 	init_mm.start_code = (unsigned long)_text;
112 	init_mm.end_code = (unsigned long)_etext;
113 	init_mm.end_data = (unsigned long)_edata;
114 	init_mm.brk = (unsigned long)_end;
115 
116 	/* first page of system - kernel .vector starts here */
117 	min_low_pfn = ARCH_PFN_OFFSET;
118 
119 	/* Last usable page of low mem */
120 	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
121 
122 #ifdef CONFIG_FLATMEM
123 	/* pfn_valid() uses this */
124 	max_mapnr = max_low_pfn - min_low_pfn;
125 #endif
126 
127 	/*------------- bootmem allocator setup -----------------------*/
128 
129 	/*
130 	 * seed the bootmem allocator after any DT memory node parsing or
131 	 * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
132 	 *
133 	 * Only low mem is added, otherwise we have crashes when allocating
134 	 * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
135 	 * avail memory, ending in highmem with a > 32-bit address. However
136 	 * it then tries to memset it with a truncaed 32-bit handle, causing
137 	 * the crash
138 	 */
139 
140 	memblock_add_node(low_mem_start, low_mem_sz, 0);
141 	memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
142 
143 #ifdef CONFIG_BLK_DEV_INITRD
144 	if (initrd_start)
145 		memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
146 #endif
147 
148 	early_init_fdt_reserve_self();
149 	early_init_fdt_scan_reserved_mem();
150 
151 	memblock_dump_all();
152 
153 	/*----------------- node/zones setup --------------------------*/
154 	memset(zones_size, 0, sizeof(zones_size));
155 	memset(zones_holes, 0, sizeof(zones_holes));
156 
157 	zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
158 	zones_holes[ZONE_NORMAL] = 0;
159 
160 	/*
161 	 * We can't use the helper free_area_init(zones[]) because it uses
162 	 * PAGE_OFFSET to compute the @min_low_pfn which would be wrong
163 	 * when our kernel doesn't start at PAGE_OFFSET, i.e.
164 	 * PAGE_OFFSET != CONFIG_LINUX_RAM_BASE
165 	 */
166 	free_area_init_node(0,			/* node-id */
167 			    zones_size,		/* num pages per zone */
168 			    min_low_pfn,	/* first pfn of node */
169 			    zones_holes);	/* holes */
170 
171 #ifdef CONFIG_HIGHMEM
172 	/*
173 	 * Populate a new node with highmem
174 	 *
175 	 * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
176 	 * than addresses in normal ala low memory (0x8000_0000 based).
177 	 * Even with PAE, the huge peripheral space hole would waste a lot of
178 	 * mem with single mem_map[]. This warrants a mem_map per region design.
179 	 * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
180 	 *
181 	 * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
182 	 * populated with normal memory zone while node 1 only has highmem
183 	 */
184 	node_set_online(1);
185 
186 	min_high_pfn = PFN_DOWN(high_mem_start);
187 	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
188 
189 	zones_size[ZONE_NORMAL] = 0;
190 	zones_holes[ZONE_NORMAL] = 0;
191 
192 	zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
193 	zones_holes[ZONE_HIGHMEM] = 0;
194 
195 	free_area_init_node(1,			/* node-id */
196 			    zones_size,		/* num pages per zone */
197 			    min_high_pfn,	/* first pfn of node */
198 			    zones_holes);	/* holes */
199 
200 	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
201 	kmap_init();
202 #endif
203 }
204 
205 /*
206  * mem_init - initializes memory
207  *
208  * Frees up bootmem
209  * Calculates and displays memory available/used
210  */
211 void __init mem_init(void)
212 {
213 #ifdef CONFIG_HIGHMEM
214 	unsigned long tmp;
215 
216 	reset_all_zones_managed_pages();
217 	for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
218 		free_highmem_page(pfn_to_page(tmp));
219 #endif
220 
221 	free_all_bootmem();
222 	mem_init_print_info(NULL);
223 }
224 
225 /*
226  * free_initmem: Free all the __init memory.
227  */
228 void __ref free_initmem(void)
229 {
230 	free_initmem_default(-1);
231 }
232 
233 #ifdef CONFIG_BLK_DEV_INITRD
234 void __init free_initrd_mem(unsigned long start, unsigned long end)
235 {
236 	free_reserved_area((void *)start, (void *)end, -1, "initrd");
237 }
238 #endif
239