xref: /openbmc/linux/arch/arc/mm/init.c (revision 2572f00d)
1 /*
2  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  */
8 
9 #include <linux/kernel.h>
10 #include <linux/mm.h>
11 #include <linux/bootmem.h>
12 #include <linux/memblock.h>
13 #ifdef CONFIG_BLK_DEV_INITRD
14 #include <linux/initrd.h>
15 #endif
16 #include <linux/swap.h>
17 #include <linux/module.h>
18 #include <linux/highmem.h>
19 #include <asm/page.h>
20 #include <asm/pgalloc.h>
21 #include <asm/sections.h>
22 #include <asm/arcregs.h>
23 
24 pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE);
25 char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE);
26 EXPORT_SYMBOL(empty_zero_page);
27 
28 static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
29 static unsigned long low_mem_sz;
30 
31 #ifdef CONFIG_HIGHMEM
32 static unsigned long min_high_pfn;
33 static u64 high_mem_start;
34 static u64 high_mem_sz;
35 #endif
36 
37 /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
38 static int __init setup_mem_sz(char *str)
39 {
40 	low_mem_sz = memparse(str, NULL) & PAGE_MASK;
41 
42 	/* early console might not be setup yet - it will show up later */
43 	pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz));
44 
45 	return 0;
46 }
47 early_param("mem", setup_mem_sz);
48 
49 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
50 {
51 	int in_use = 0;
52 
53 	if (!low_mem_sz) {
54 		if (base != low_mem_start)
55 			panic("CONFIG_LINUX_LINK_BASE != DT memory { }");
56 
57 		low_mem_sz = size;
58 		in_use = 1;
59 	} else {
60 #ifdef CONFIG_HIGHMEM
61 		high_mem_start = base;
62 		high_mem_sz = size;
63 		in_use = 1;
64 #endif
65 	}
66 
67 	pr_info("Memory @ %llx [%lldM] %s\n",
68 		base, TO_MB(size), !in_use ? "Not used":"");
69 }
70 
71 #ifdef CONFIG_BLK_DEV_INITRD
72 static int __init early_initrd(char *p)
73 {
74 	unsigned long start, size;
75 	char *endp;
76 
77 	start = memparse(p, &endp);
78 	if (*endp == ',') {
79 		size = memparse(endp + 1, NULL);
80 
81 		initrd_start = (unsigned long)__va(start);
82 		initrd_end = (unsigned long)__va(start + size);
83 	}
84 	return 0;
85 }
86 early_param("initrd", early_initrd);
87 #endif
88 
89 /*
90  * First memory setup routine called from setup_arch()
91  * 1. setup swapper's mm @init_mm
92  * 2. Count the pages we have and setup bootmem allocator
93  * 3. zone setup
94  */
95 void __init setup_arch_memory(void)
96 {
97 	unsigned long zones_size[MAX_NR_ZONES];
98 	unsigned long zones_holes[MAX_NR_ZONES];
99 
100 	init_mm.start_code = (unsigned long)_text;
101 	init_mm.end_code = (unsigned long)_etext;
102 	init_mm.end_data = (unsigned long)_edata;
103 	init_mm.brk = (unsigned long)_end;
104 
105 	/* first page of system - kernel .vector starts here */
106 	min_low_pfn = ARCH_PFN_OFFSET;
107 
108 	/* Last usable page of low mem */
109 	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
110 
111 #ifdef CONFIG_HIGHMEM
112 	min_high_pfn = PFN_DOWN(high_mem_start);
113 	max_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
114 #endif
115 
116 	max_mapnr = max_pfn - min_low_pfn;
117 
118 	/*------------- bootmem allocator setup -----------------------*/
119 
120 	/*
121 	 * seed the bootmem allocator after any DT memory node parsing or
122 	 * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz
123 	 *
124 	 * Only low mem is added, otherwise we have crashes when allocating
125 	 * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of
126 	 * avail memory, ending in highmem with a > 32-bit address. However
127 	 * it then tries to memset it with a truncaed 32-bit handle, causing
128 	 * the crash
129 	 */
130 
131 	memblock_add(low_mem_start, low_mem_sz);
132 	memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
133 
134 #ifdef CONFIG_BLK_DEV_INITRD
135 	if (initrd_start)
136 		memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
137 #endif
138 
139 	memblock_dump_all();
140 
141 	/*----------------- node/zones setup --------------------------*/
142 	memset(zones_size, 0, sizeof(zones_size));
143 	memset(zones_holes, 0, sizeof(zones_holes));
144 
145 	zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
146 	zones_holes[ZONE_NORMAL] = 0;
147 
148 #ifdef CONFIG_HIGHMEM
149 	zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
150 
151 	/* This handles the peripheral address space hole */
152 	zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn;
153 #endif
154 
155 	/*
156 	 * We can't use the helper free_area_init(zones[]) because it uses
157 	 * PAGE_OFFSET to compute the @min_low_pfn which would be wrong
158 	 * when our kernel doesn't start at PAGE_OFFSET, i.e.
159 	 * PAGE_OFFSET != CONFIG_LINUX_LINK_BASE
160 	 */
161 	free_area_init_node(0,			/* node-id */
162 			    zones_size,		/* num pages per zone */
163 			    min_low_pfn,	/* first pfn of node */
164 			    zones_holes);	/* holes */
165 
166 #ifdef CONFIG_HIGHMEM
167 	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
168 	kmap_init();
169 #endif
170 }
171 
172 /*
173  * mem_init - initializes memory
174  *
175  * Frees up bootmem
176  * Calculates and displays memory available/used
177  */
178 void __init mem_init(void)
179 {
180 #ifdef CONFIG_HIGHMEM
181 	unsigned long tmp;
182 
183 	reset_all_zones_managed_pages();
184 	for (tmp = min_high_pfn; tmp < max_pfn; tmp++)
185 		free_highmem_page(pfn_to_page(tmp));
186 #endif
187 
188 	free_all_bootmem();
189 	mem_init_print_info(NULL);
190 }
191 
192 /*
193  * free_initmem: Free all the __init memory.
194  */
195 void __init_refok free_initmem(void)
196 {
197 	free_initmem_default(-1);
198 }
199 
200 #ifdef CONFIG_BLK_DEV_INITRD
201 void __init free_initrd_mem(unsigned long start, unsigned long end)
202 {
203 	free_reserved_area((void *)start, (void *)end, -1, "initrd");
204 }
205 #endif
206