xref: /openbmc/linux/arch/arc/kernel/smp.c (revision 93d90ad7)
1 /*
2  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  *
8  * RajeshwarR: Dec 11, 2007
9  *   -- Added support for Inter Processor Interrupts
10  *
11  * Vineetg: Nov 1st, 2007
12  *    -- Initial Write (Borrowed heavily from ARM)
13  */
14 
15 #include <linux/spinlock.h>
16 #include <linux/sched.h>
17 #include <linux/interrupt.h>
18 #include <linux/profile.h>
19 #include <linux/mm.h>
20 #include <linux/cpu.h>
21 #include <linux/irq.h>
22 #include <linux/atomic.h>
23 #include <linux/cpumask.h>
24 #include <linux/reboot.h>
25 #include <asm/processor.h>
26 #include <asm/setup.h>
27 #include <asm/mach_desc.h>
28 
29 #ifndef CONFIG_ARC_HAS_LLSC
30 arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
31 arch_spinlock_t smp_bitops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
32 #endif
33 
34 struct plat_smp_ops  plat_smp_ops;
35 
36 /* XXX: per cpu ? Only needed once in early seconday boot */
37 struct task_struct *secondary_idle_tsk;
38 
39 /* Called from start_kernel */
40 void __init smp_prepare_boot_cpu(void)
41 {
42 }
43 
44 /*
45  * Initialise the CPU possible map early - this describes the CPUs
46  * which may be present or become present in the system.
47  */
48 void __init smp_init_cpus(void)
49 {
50 	unsigned int i;
51 
52 	for (i = 0; i < NR_CPUS; i++)
53 		set_cpu_possible(i, true);
54 }
55 
56 /* called from init ( ) =>  process 1 */
57 void __init smp_prepare_cpus(unsigned int max_cpus)
58 {
59 	int i;
60 
61 	/*
62 	 * Initialise the present map, which describes the set of CPUs
63 	 * actually populated at the present time.
64 	 */
65 	for (i = 0; i < max_cpus; i++)
66 		set_cpu_present(i, true);
67 }
68 
69 void __init smp_cpus_done(unsigned int max_cpus)
70 {
71 
72 }
73 
74 /*
75  * After power-up, a non Master CPU needs to wait for Master to kick start it
76  *
77  * The default implementation halts
78  *
79  * This relies on platform specific support allowing Master to directly set
80  * this CPU's PC (to be @first_lines_of_secondary() and kick start it.
81  *
82  * In lack of such h/w assist, platforms can override this function
83  *   - make this function busy-spin on a token, eventually set by Master
84  *     (from arc_platform_smp_wakeup_cpu())
85  *   - Once token is available, jump to @first_lines_of_secondary
86  *     (using inline asm).
87  *
88  * Alert: can NOT use stack here as it has not been determined/setup for CPU.
89  *        If it turns out to be elaborate, it's better to code it in assembly
90  *
91  */
92 void __weak arc_platform_smp_wait_to_boot(int cpu)
93 {
94 	/*
95 	 * As a hack for debugging - since debugger will single-step over the
96 	 * FLAG insn - wrap the halt itself it in a self loop
97 	 */
98 	__asm__ __volatile__(
99 	"1:		\n"
100 	"	flag 1	\n"
101 	"	b 1b	\n");
102 }
103 
104 const char *arc_platform_smp_cpuinfo(void)
105 {
106 	return plat_smp_ops.info ? : "";
107 }
108 
109 /*
110  * The very first "C" code executed by secondary
111  * Called from asm stub in head.S
112  * "current"/R25 already setup by low level boot code
113  */
114 void start_kernel_secondary(void)
115 {
116 	struct mm_struct *mm = &init_mm;
117 	unsigned int cpu = smp_processor_id();
118 
119 	/* MMU, Caches, Vector Table, Interrupts etc */
120 	setup_processor();
121 
122 	atomic_inc(&mm->mm_users);
123 	atomic_inc(&mm->mm_count);
124 	current->active_mm = mm;
125 	cpumask_set_cpu(cpu, mm_cpumask(mm));
126 
127 	notify_cpu_starting(cpu);
128 	set_cpu_online(cpu, true);
129 
130 	pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu);
131 
132 	if (machine_desc->init_smp)
133 		machine_desc->init_smp(cpu);
134 
135 	arc_local_timer_setup();
136 
137 	local_irq_enable();
138 	preempt_disable();
139 	cpu_startup_entry(CPUHP_ONLINE);
140 }
141 
142 /*
143  * Called from kernel_init( ) -> smp_init( ) - for each CPU
144  *
145  * At this point, Secondary Processor  is "HALT"ed:
146  *  -It booted, but was halted in head.S
147  *  -It was configured to halt-on-reset
148  *  So need to wake it up.
149  *
150  * Essential requirements being where to run from (PC) and stack (SP)
151 */
152 int __cpu_up(unsigned int cpu, struct task_struct *idle)
153 {
154 	unsigned long wait_till;
155 
156 	secondary_idle_tsk = idle;
157 
158 	pr_info("Idle Task [%d] %p", cpu, idle);
159 	pr_info("Trying to bring up CPU%u ...\n", cpu);
160 
161 	if (plat_smp_ops.cpu_kick)
162 		plat_smp_ops.cpu_kick(cpu,
163 				(unsigned long)first_lines_of_secondary);
164 
165 	/* wait for 1 sec after kicking the secondary */
166 	wait_till = jiffies + HZ;
167 	while (time_before(jiffies, wait_till)) {
168 		if (cpu_online(cpu))
169 			break;
170 	}
171 
172 	if (!cpu_online(cpu)) {
173 		pr_info("Timeout: CPU%u FAILED to comeup !!!\n", cpu);
174 		return -1;
175 	}
176 
177 	secondary_idle_tsk = NULL;
178 
179 	return 0;
180 }
181 
182 /*
183  * not supported here
184  */
185 int __init setup_profiling_timer(unsigned int multiplier)
186 {
187 	return -EINVAL;
188 }
189 
190 /*****************************************************************************/
191 /*              Inter Processor Interrupt Handling                           */
192 /*****************************************************************************/
193 
194 enum ipi_msg_type {
195 	IPI_EMPTY = 0,
196 	IPI_RESCHEDULE = 1,
197 	IPI_CALL_FUNC,
198 	IPI_CPU_STOP,
199 };
200 
201 /*
202  * In arches with IRQ for each msg type (above), receiver can use IRQ-id  to
203  * figure out what msg was sent. For those which don't (ARC has dedicated IPI
204  * IRQ), the msg-type needs to be conveyed via per-cpu data
205  */
206 
207 static DEFINE_PER_CPU(unsigned long, ipi_data);
208 
209 static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg)
210 {
211 	unsigned long __percpu *ipi_data_ptr = per_cpu_ptr(&ipi_data, cpu);
212 	unsigned long old, new;
213 	unsigned long flags;
214 
215 	pr_debug("%d Sending msg [%d] to %d\n", smp_processor_id(), msg, cpu);
216 
217 	local_irq_save(flags);
218 
219 	/*
220 	 * Atomically write new msg bit (in case others are writing too),
221 	 * and read back old value
222 	 */
223 	do {
224 		new = old = *ipi_data_ptr;
225 		new |= 1U << msg;
226 	} while (cmpxchg(ipi_data_ptr, old, new) != old);
227 
228 	/*
229 	 * Call the platform specific IPI kick function, but avoid if possible:
230 	 * Only do so if there's no pending msg from other concurrent sender(s).
231 	 * Otherwise, recevier will see this msg as well when it takes the
232 	 * IPI corresponding to that msg. This is true, even if it is already in
233 	 * IPI handler, because !@old means it has not yet dequeued the msg(s)
234 	 * so @new msg can be a free-loader
235 	 */
236 	if (plat_smp_ops.ipi_send && !old)
237 		plat_smp_ops.ipi_send(cpu);
238 
239 	local_irq_restore(flags);
240 }
241 
242 static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg)
243 {
244 	unsigned int cpu;
245 
246 	for_each_cpu(cpu, callmap)
247 		ipi_send_msg_one(cpu, msg);
248 }
249 
250 void smp_send_reschedule(int cpu)
251 {
252 	ipi_send_msg_one(cpu, IPI_RESCHEDULE);
253 }
254 
255 void smp_send_stop(void)
256 {
257 	struct cpumask targets;
258 	cpumask_copy(&targets, cpu_online_mask);
259 	cpumask_clear_cpu(smp_processor_id(), &targets);
260 	ipi_send_msg(&targets, IPI_CPU_STOP);
261 }
262 
263 void arch_send_call_function_single_ipi(int cpu)
264 {
265 	ipi_send_msg_one(cpu, IPI_CALL_FUNC);
266 }
267 
268 void arch_send_call_function_ipi_mask(const struct cpumask *mask)
269 {
270 	ipi_send_msg(mask, IPI_CALL_FUNC);
271 }
272 
273 /*
274  * ipi_cpu_stop - handle IPI from smp_send_stop()
275  */
276 static void ipi_cpu_stop(void)
277 {
278 	machine_halt();
279 }
280 
281 static inline void __do_IPI(unsigned long msg)
282 {
283 	switch (msg) {
284 	case IPI_RESCHEDULE:
285 		scheduler_ipi();
286 		break;
287 
288 	case IPI_CALL_FUNC:
289 		generic_smp_call_function_interrupt();
290 		break;
291 
292 	case IPI_CPU_STOP:
293 		ipi_cpu_stop();
294 		break;
295 
296 	default:
297 		pr_warn("IPI with unexpected msg %ld\n", msg);
298 	}
299 }
300 
301 /*
302  * arch-common ISR to handle for inter-processor interrupts
303  * Has hooks for platform specific IPI
304  */
305 irqreturn_t do_IPI(int irq, void *dev_id)
306 {
307 	unsigned long pending;
308 
309 	pr_debug("IPI [%ld] received on cpu %d\n",
310 		 *this_cpu_ptr(&ipi_data), smp_processor_id());
311 
312 	if (plat_smp_ops.ipi_clear)
313 		plat_smp_ops.ipi_clear(irq);
314 
315 	/*
316 	 * "dequeue" the msg corresponding to this IPI (and possibly other
317 	 * piggybacked msg from elided IPIs: see ipi_send_msg_one() above)
318 	 */
319 	pending = xchg(this_cpu_ptr(&ipi_data), 0);
320 
321 	do {
322 		unsigned long msg = __ffs(pending);
323 		__do_IPI(msg);
324 		pending &= ~(1U << msg);
325 	} while (pending);
326 
327 	return IRQ_HANDLED;
328 }
329 
330 /*
331  * API called by platform code to hookup arch-common ISR to their IPI IRQ
332  */
333 static DEFINE_PER_CPU(int, ipi_dev);
334 
335 int smp_ipi_irq_setup(int cpu, int irq)
336 {
337 	int *dev = per_cpu_ptr(&ipi_dev, cpu);
338 
339 	arc_request_percpu_irq(irq, cpu, do_IPI, "IPI Interrupt", dev);
340 
341 	return 0;
342 }
343