xref: /openbmc/linux/arch/arc/kernel/process.c (revision 76426e23)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4  *
5  * Amit Bhor, Kanika Nema: Codito Technologies 2004
6  */
7 
8 #include <linux/errno.h>
9 #include <linux/module.h>
10 #include <linux/sched.h>
11 #include <linux/sched/task.h>
12 #include <linux/sched/task_stack.h>
13 
14 #include <linux/mm.h>
15 #include <linux/fs.h>
16 #include <linux/unistd.h>
17 #include <linux/ptrace.h>
18 #include <linux/slab.h>
19 #include <linux/syscalls.h>
20 #include <linux/elf.h>
21 #include <linux/tick.h>
22 
23 #include <asm/fpu.h>
24 
25 SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
26 {
27 	task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
28 	return 0;
29 }
30 
31 /*
32  * We return the user space TLS data ptr as sys-call return code
33  * Ideally it should be copy to user.
34  * However we can cheat by the fact that some sys-calls do return
35  * absurdly high values
36  * Since the tls dat aptr is not going to be in range of 0xFFFF_xxxx
37  * it won't be considered a sys-call error
38  * and it will be loads better than copy-to-user, which is a definite
39  * D-TLB Miss
40  */
41 SYSCALL_DEFINE0(arc_gettls)
42 {
43 	return task_thread_info(current)->thr_ptr;
44 }
45 
46 SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
47 {
48 	struct pt_regs *regs = current_pt_regs();
49 	u32 uval;
50 	int ret;
51 
52 	/*
53 	 * This is only for old cores lacking LLOCK/SCOND, which by defintion
54 	 * can't possibly be SMP. Thus doesn't need to be SMP safe.
55 	 * And this also helps reduce the overhead for serializing in
56 	 * the UP case
57 	 */
58 	WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
59 
60 	/* Z indicates to userspace if operation succeded */
61 	regs->status32 &= ~STATUS_Z_MASK;
62 
63 	ret = access_ok(uaddr, sizeof(*uaddr));
64 	if (!ret)
65 		 goto fail;
66 
67 again:
68 	preempt_disable();
69 
70 	ret = __get_user(uval, uaddr);
71 	if (ret)
72 		 goto fault;
73 
74 	if (uval != expected)
75 		 goto out;
76 
77 	ret = __put_user(new, uaddr);
78 	if (ret)
79 		 goto fault;
80 
81 	regs->status32 |= STATUS_Z_MASK;
82 
83 out:
84 	preempt_enable();
85 	return uval;
86 
87 fault:
88 	preempt_enable();
89 
90 	if (unlikely(ret != -EFAULT))
91 		 goto fail;
92 
93 	down_read(&current->mm->mmap_sem);
94 	ret = fixup_user_fault(current, current->mm, (unsigned long) uaddr,
95 			       FAULT_FLAG_WRITE, NULL);
96 	up_read(&current->mm->mmap_sem);
97 
98 	if (likely(!ret))
99 		 goto again;
100 
101 fail:
102 	force_sig(SIGSEGV);
103 	return ret;
104 }
105 
106 #ifdef CONFIG_ISA_ARCV2
107 
108 void arch_cpu_idle(void)
109 {
110 	/* Re-enable interrupts <= default irq priority before commiting SLEEP */
111 	const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO;
112 
113 	__asm__ __volatile__(
114 		"sleep %0	\n"
115 		:
116 		:"I"(arg)); /* can't be "r" has to be embedded const */
117 }
118 
119 #elif defined(CONFIG_EZNPS_MTM_EXT)	/* ARC700 variant in NPS */
120 
121 void arch_cpu_idle(void)
122 {
123 	/* only the calling HW thread needs to sleep */
124 	__asm__ __volatile__(
125 		".word %0	\n"
126 		:
127 		:"i"(CTOP_INST_HWSCHD_WFT_IE12));
128 }
129 
130 #else	/* ARC700 */
131 
132 void arch_cpu_idle(void)
133 {
134 	/* sleep, but enable both set E1/E2 (levels of interrutps) before committing */
135 	__asm__ __volatile__("sleep 0x3	\n");
136 }
137 
138 #endif
139 
140 asmlinkage void ret_from_fork(void);
141 
142 /*
143  * Copy architecture-specific thread state
144  *
145  * Layout of Child kernel mode stack as setup at the end of this function is
146  *
147  * |     ...        |
148  * |     ...        |
149  * |    unused      |
150  * |                |
151  * ------------------
152  * |     r25        |   <==== top of Stack (thread.ksp)
153  * ~                ~
154  * |    --to--      |   (CALLEE Regs of kernel mode)
155  * |     r13        |
156  * ------------------
157  * |     fp         |
158  * |    blink       |   @ret_from_fork
159  * ------------------
160  * |                |
161  * ~                ~
162  * ~                ~
163  * |                |
164  * ------------------
165  * |     r12        |
166  * ~                ~
167  * |    --to--      |   (scratch Regs of user mode)
168  * |     r0         |
169  * ------------------
170  * |      SP        |
171  * |    orig_r0     |
172  * |    event/ECR   |
173  * |    user_r25    |
174  * ------------------  <===== END of PAGE
175  */
176 int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
177 	unsigned long kthread_arg, struct task_struct *p, unsigned long tls)
178 {
179 	struct pt_regs *c_regs;        /* child's pt_regs */
180 	unsigned long *childksp;       /* to unwind out of __switch_to() */
181 	struct callee_regs *c_callee;  /* child's callee regs */
182 	struct callee_regs *parent_callee;  /* paren't callee */
183 	struct pt_regs *regs = current_pt_regs();
184 
185 	/* Mark the specific anchors to begin with (see pic above) */
186 	c_regs = task_pt_regs(p);
187 	childksp = (unsigned long *)c_regs - 2;  /* 2 words for FP/BLINK */
188 	c_callee = ((struct callee_regs *)childksp) - 1;
189 
190 	/*
191 	 * __switch_to() uses thread.ksp to start unwinding stack
192 	 * For kernel threads we don't need to create callee regs, the
193 	 * stack layout nevertheless needs to remain the same.
194 	 * Also, since __switch_to anyways unwinds callee regs, we use
195 	 * this to populate kernel thread entry-pt/args into callee regs,
196 	 * so that ret_from_kernel_thread() becomes simpler.
197 	 */
198 	p->thread.ksp = (unsigned long)c_callee;	/* THREAD_KSP */
199 
200 	/* __switch_to expects FP(0), BLINK(return addr) at top */
201 	childksp[0] = 0;			/* fp */
202 	childksp[1] = (unsigned long)ret_from_fork; /* blink */
203 
204 	if (unlikely(p->flags & PF_KTHREAD)) {
205 		memset(c_regs, 0, sizeof(struct pt_regs));
206 
207 		c_callee->r13 = kthread_arg;
208 		c_callee->r14 = usp;  /* function */
209 
210 		return 0;
211 	}
212 
213 	/*--------- User Task Only --------------*/
214 
215 	/* __switch_to expects FP(0), BLINK(return addr) at top of stack */
216 	childksp[0] = 0;				/* for POP fp */
217 	childksp[1] = (unsigned long)ret_from_fork;	/* for POP blink */
218 
219 	/* Copy parents pt regs on child's kernel mode stack */
220 	*c_regs = *regs;
221 
222 	if (usp)
223 		c_regs->sp = usp;
224 
225 	c_regs->r0 = 0;		/* fork returns 0 in child */
226 
227 	parent_callee = ((struct callee_regs *)regs) - 1;
228 	*c_callee = *parent_callee;
229 
230 	if (unlikely(clone_flags & CLONE_SETTLS)) {
231 		/*
232 		 * set task's userland tls data ptr from 4th arg
233 		 * clone C-lib call is difft from clone sys-call
234 		 */
235 		task_thread_info(p)->thr_ptr = tls;
236 	} else {
237 		/* Normal fork case: set parent's TLS ptr in child */
238 		task_thread_info(p)->thr_ptr =
239 		task_thread_info(current)->thr_ptr;
240 	}
241 
242 
243 	/*
244 	 * setup usermode thread pointer #1:
245 	 * when child is picked by scheduler, __switch_to() uses @c_callee to
246 	 * populate usermode callee regs: this works (despite being in a kernel
247 	 * function) since special return path for child @ret_from_fork()
248 	 * ensures those regs are not clobbered all the way to RTIE to usermode
249 	 */
250 	c_callee->r25 = task_thread_info(p)->thr_ptr;
251 
252 #ifdef CONFIG_ARC_CURR_IN_REG
253 	/*
254 	 * setup usermode thread pointer #2:
255 	 * however for this special use of r25 in kernel, __switch_to() sets
256 	 * r25 for kernel needs and only in the final return path is usermode
257 	 * r25 setup, from pt_regs->user_r25. So set that up as well
258 	 */
259 	c_regs->user_r25 = c_callee->r25;
260 #endif
261 
262 	return 0;
263 }
264 
265 /*
266  * Do necessary setup to start up a new user task
267  */
268 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
269 {
270 	regs->sp = usp;
271 	regs->ret = pc;
272 
273 	/*
274 	 * [U]ser Mode bit set
275 	 * [L] ZOL loop inhibited to begin with - cleared by a LP insn
276 	 * Interrupts enabled
277 	 */
278 	regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS;
279 
280 #ifdef CONFIG_EZNPS_MTM_EXT
281 	regs->eflags = 0;
282 #endif
283 
284 	fpu_init_task(regs);
285 
286 	/* bogus seed values for debugging */
287 	regs->lp_start = 0x10;
288 	regs->lp_end = 0x80;
289 }
290 
291 /*
292  * Some archs flush debug and FPU info here
293  */
294 void flush_thread(void)
295 {
296 }
297 
298 int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
299 {
300 	return 0;
301 }
302 
303 int elf_check_arch(const struct elf32_hdr *x)
304 {
305 	unsigned int eflags;
306 
307 	if (x->e_machine != EM_ARC_INUSE) {
308 		pr_err("ELF not built for %s ISA\n",
309 			is_isa_arcompact() ? "ARCompact":"ARCv2");
310 		return 0;
311 	}
312 
313 	eflags = x->e_flags;
314 	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
315 		pr_err("ABI mismatch - you need newer toolchain\n");
316 		force_sigsegv(SIGSEGV);
317 		return 0;
318 	}
319 
320 	return 1;
321 }
322 EXPORT_SYMBOL(elf_check_arch);
323