1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com) 4 */ 5 6 #include <linux/interrupt.h> 7 #include <linux/module.h> 8 #include <linux/of.h> 9 #include <linux/irqdomain.h> 10 #include <linux/irqchip.h> 11 #include <asm/irq.h> 12 13 #define NR_CPU_IRQS 32 /* number of irq lines coming in */ 14 #define TIMER0_IRQ 3 /* Fixed by ISA */ 15 16 /* 17 * Early Hardware specific Interrupt setup 18 * -Platform independent, needed for each CPU (not foldable into init_IRQ) 19 * -Called very early (start_kernel -> setup_arch -> setup_processor) 20 * 21 * what it does ? 22 * -Optionally, setup the High priority Interrupts as Level 2 IRQs 23 */ 24 void arc_init_IRQ(void) 25 { 26 unsigned int level_mask = 0, i; 27 28 /* Is timer high priority Interrupt (Level2 in ARCompact jargon) */ 29 level_mask |= IS_ENABLED(CONFIG_ARC_COMPACT_IRQ_LEVELS) << TIMER0_IRQ; 30 31 /* 32 * Write to register, even if no LV2 IRQs configured to reset it 33 * in case bootloader had mucked with it 34 */ 35 write_aux_reg(AUX_IRQ_LEV, level_mask); 36 37 if (level_mask) 38 pr_info("Level-2 interrupts bitset %x\n", level_mask); 39 40 /* 41 * Disable all IRQ lines so faulty external hardware won't 42 * trigger interrupt that kernel is not ready to handle. 43 */ 44 for (i = TIMER0_IRQ; i < NR_CPU_IRQS; i++) { 45 unsigned int ienb; 46 47 ienb = read_aux_reg(AUX_IENABLE); 48 ienb &= ~(1 << i); 49 write_aux_reg(AUX_IENABLE, ienb); 50 } 51 } 52 53 /* 54 * ARC700 core includes a simple on-chip intc supporting 55 * -per IRQ enable/disable 56 * -2 levels of interrupts (high/low) 57 * -all interrupts being level triggered 58 * 59 * To reduce platform code, we assume all IRQs directly hooked-up into intc. 60 * Platforms with external intc, hence cascaded IRQs, are free to over-ride 61 * below, per IRQ. 62 */ 63 64 static void arc_irq_mask(struct irq_data *data) 65 { 66 unsigned int ienb; 67 68 ienb = read_aux_reg(AUX_IENABLE); 69 ienb &= ~(1 << data->hwirq); 70 write_aux_reg(AUX_IENABLE, ienb); 71 } 72 73 static void arc_irq_unmask(struct irq_data *data) 74 { 75 unsigned int ienb; 76 77 ienb = read_aux_reg(AUX_IENABLE); 78 ienb |= (1 << data->hwirq); 79 write_aux_reg(AUX_IENABLE, ienb); 80 } 81 82 static struct irq_chip onchip_intc = { 83 .name = "ARC In-core Intc", 84 .irq_mask = arc_irq_mask, 85 .irq_unmask = arc_irq_unmask, 86 }; 87 88 static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq, 89 irq_hw_number_t hw) 90 { 91 switch (hw) { 92 case TIMER0_IRQ: 93 irq_set_percpu_devid(irq); 94 irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq); 95 break; 96 default: 97 irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq); 98 } 99 return 0; 100 } 101 102 static const struct irq_domain_ops arc_intc_domain_ops = { 103 .xlate = irq_domain_xlate_onecell, 104 .map = arc_intc_domain_map, 105 }; 106 107 static int __init 108 init_onchip_IRQ(struct device_node *intc, struct device_node *parent) 109 { 110 struct irq_domain *root_domain; 111 112 if (parent) 113 panic("DeviceTree incore intc not a root irq controller\n"); 114 115 root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS, 116 &arc_intc_domain_ops, NULL); 117 if (!root_domain) 118 panic("root irq domain not avail\n"); 119 120 /* 121 * Needed for primary domain lookup to succeed 122 * This is a primary irqchip, and can never have a parent 123 */ 124 irq_set_default_host(root_domain); 125 126 return 0; 127 } 128 129 IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ); 130 131 /* 132 * arch_local_irq_enable - Enable interrupts. 133 * 134 * 1. Explicitly called to re-enable interrupts 135 * 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc 136 * which maybe in hard ISR itself 137 * 138 * Semantics of this function change depending on where it is called from: 139 * 140 * -If called from hard-ISR, it must not invert interrupt priorities 141 * e.g. suppose TIMER is high priority (Level 2) IRQ 142 * Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times. 143 * Here local_irq_enable( ) shd not re-enable lower priority interrupts 144 * -If called from soft-ISR, it must re-enable all interrupts 145 * soft ISR are low prioity jobs which can be very slow, thus all IRQs 146 * must be enabled while they run. 147 * Now hardware context wise we may still be in L2 ISR (not done rtie) 148 * still we must re-enable both L1 and L2 IRQs 149 * Another twist is prev scenario with flow being 150 * L1 ISR ==> interrupted by L2 ISR ==> L2 soft ISR 151 * here we must not re-enable Ll as prev Ll Interrupt's h/w context will get 152 * over-written (this is deficiency in ARC700 Interrupt mechanism) 153 */ 154 155 #ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS /* Complex version for 2 IRQ levels */ 156 157 void arch_local_irq_enable(void) 158 { 159 unsigned long flags = arch_local_save_flags(); 160 161 if (flags & STATUS_A2_MASK) 162 flags |= STATUS_E2_MASK; 163 else if (flags & STATUS_A1_MASK) 164 flags |= STATUS_E1_MASK; 165 166 arch_local_irq_restore(flags); 167 } 168 169 EXPORT_SYMBOL(arch_local_irq_enable); 170 #endif 171