1 /* 2 * Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com) 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License version 2 as 6 * published by the Free Software Foundation. 7 * 8 */ 9 10 #include <linux/interrupt.h> 11 #include <linux/module.h> 12 #include <linux/of.h> 13 #include <linux/irqdomain.h> 14 #include <linux/irqchip.h> 15 #include <asm/irq.h> 16 17 /* 18 * Early Hardware specific Interrupt setup 19 * -Platform independent, needed for each CPU (not foldable into init_IRQ) 20 * -Called very early (start_kernel -> setup_arch -> setup_processor) 21 * 22 * what it does ? 23 * -Optionally, setup the High priority Interrupts as Level 2 IRQs 24 */ 25 void arc_init_IRQ(void) 26 { 27 int level_mask = 0; 28 29 /* setup any high priority Interrupts (Level2 in ARCompact jargon) */ 30 level_mask |= IS_ENABLED(CONFIG_ARC_IRQ3_LV2) << 3; 31 level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5; 32 level_mask |= IS_ENABLED(CONFIG_ARC_IRQ6_LV2) << 6; 33 34 /* 35 * Write to register, even if no LV2 IRQs configured to reset it 36 * in case bootloader had mucked with it 37 */ 38 write_aux_reg(AUX_IRQ_LEV, level_mask); 39 40 if (level_mask) 41 pr_info("Level-2 interrupts bitset %x\n", level_mask); 42 } 43 44 /* 45 * ARC700 core includes a simple on-chip intc supporting 46 * -per IRQ enable/disable 47 * -2 levels of interrupts (high/low) 48 * -all interrupts being level triggered 49 * 50 * To reduce platform code, we assume all IRQs directly hooked-up into intc. 51 * Platforms with external intc, hence cascaded IRQs, are free to over-ride 52 * below, per IRQ. 53 */ 54 55 static void arc_irq_mask(struct irq_data *data) 56 { 57 unsigned int ienb; 58 59 ienb = read_aux_reg(AUX_IENABLE); 60 ienb &= ~(1 << data->irq); 61 write_aux_reg(AUX_IENABLE, ienb); 62 } 63 64 static void arc_irq_unmask(struct irq_data *data) 65 { 66 unsigned int ienb; 67 68 ienb = read_aux_reg(AUX_IENABLE); 69 ienb |= (1 << data->irq); 70 write_aux_reg(AUX_IENABLE, ienb); 71 } 72 73 static struct irq_chip onchip_intc = { 74 .name = "ARC In-core Intc", 75 .irq_mask = arc_irq_mask, 76 .irq_unmask = arc_irq_unmask, 77 }; 78 79 static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq, 80 irq_hw_number_t hw) 81 { 82 switch (irq) { 83 case TIMER0_IRQ: 84 #ifdef CONFIG_SMP 85 case IPI_IRQ: 86 #endif 87 irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq); 88 break; 89 default: 90 irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq); 91 } 92 return 0; 93 } 94 95 static const struct irq_domain_ops arc_intc_domain_ops = { 96 .xlate = irq_domain_xlate_onecell, 97 .map = arc_intc_domain_map, 98 }; 99 100 static struct irq_domain *root_domain; 101 102 static int __init 103 init_onchip_IRQ(struct device_node *intc, struct device_node *parent) 104 { 105 if (parent) 106 panic("DeviceTree incore intc not a root irq controller\n"); 107 108 root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0, 109 &arc_intc_domain_ops, NULL); 110 111 if (!root_domain) 112 panic("root irq domain not avail\n"); 113 114 /* with this we don't need to export root_domain */ 115 irq_set_default_host(root_domain); 116 117 return 0; 118 } 119 120 IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ); 121 122 /* 123 * arch_local_irq_enable - Enable interrupts. 124 * 125 * 1. Explicitly called to re-enable interrupts 126 * 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc 127 * which maybe in hard ISR itself 128 * 129 * Semantics of this function change depending on where it is called from: 130 * 131 * -If called from hard-ISR, it must not invert interrupt priorities 132 * e.g. suppose TIMER is high priority (Level 2) IRQ 133 * Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times. 134 * Here local_irq_enable( ) shd not re-enable lower priority interrupts 135 * -If called from soft-ISR, it must re-enable all interrupts 136 * soft ISR are low prioity jobs which can be very slow, thus all IRQs 137 * must be enabled while they run. 138 * Now hardware context wise we may still be in L2 ISR (not done rtie) 139 * still we must re-enable both L1 and L2 IRQs 140 * Another twist is prev scenario with flow being 141 * L1 ISR ==> interrupted by L2 ISR ==> L2 soft ISR 142 * here we must not re-enable Ll as prev Ll Interrupt's h/w context will get 143 * over-written (this is deficiency in ARC700 Interrupt mechanism) 144 */ 145 146 #ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS /* Complex version for 2 IRQ levels */ 147 148 void arch_local_irq_enable(void) 149 { 150 unsigned long flags = arch_local_save_flags(); 151 152 if (flags & STATUS_A2_MASK) 153 flags |= STATUS_E2_MASK; 154 else if (flags & STATUS_A1_MASK) 155 flags |= STATUS_E1_MASK; 156 157 arch_local_irq_restore(flags); 158 } 159 160 EXPORT_SYMBOL(arch_local_irq_enable); 161 #endif 162