xref: /openbmc/linux/arch/arc/kernel/intc-arcv2.c (revision a2cce7a9)
1 /*
2  * Copyright (C) 2014 Synopsys, Inc. (www.synopsys.com)
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  *
8  */
9 
10 #include <linux/interrupt.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/irqdomain.h>
14 #include <linux/irqchip.h>
15 #include <asm/irq.h>
16 
17 /*
18  * Early Hardware specific Interrupt setup
19  * -Called very early (start_kernel -> setup_arch -> setup_processor)
20  * -Platform Independent (must for any ARC Core)
21  * -Needed for each CPU (hence not foldable into init_IRQ)
22  */
23 void arc_init_IRQ(void)
24 {
25 	unsigned int tmp;
26 
27 	struct aux_irq_ctrl {
28 #ifdef CONFIG_CPU_BIG_ENDIAN
29 		unsigned int res3:18, save_idx_regs:1, res2:1,
30 			     save_u_to_u:1, save_lp_regs:1, save_blink:1,
31 			     res:4, save_nr_gpr_pairs:5;
32 #else
33 		unsigned int save_nr_gpr_pairs:5, res:4,
34 			     save_blink:1, save_lp_regs:1, save_u_to_u:1,
35 			     res2:1, save_idx_regs:1, res3:18;
36 #endif
37 	} ictrl;
38 
39 	*(unsigned int *)&ictrl = 0;
40 
41 	ictrl.save_nr_gpr_pairs = 6;	/* r0 to r11 (r12 saved manually) */
42 	ictrl.save_blink = 1;
43 	ictrl.save_lp_regs = 1;		/* LP_COUNT, LP_START, LP_END */
44 	ictrl.save_u_to_u = 0;		/* user ctxt saved on kernel stack */
45 	ictrl.save_idx_regs = 1;	/* JLI, LDI, EI */
46 
47 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
48 
49 	/* setup status32, don't enable intr yet as kernel doesn't want */
50 	tmp = read_aux_reg(0xa);
51 	tmp |= ISA_INIT_STATUS_BITS;
52 	tmp &= ~STATUS_IE_MASK;
53 	asm volatile("flag %0	\n"::"r"(tmp));
54 
55 	/*
56 	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).
57 	 * Typical builds though have only two levels (0-high, 1-low)
58 	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
59 	 * NMI style interrupts in future (say perf)
60 	 *
61 	 * Read the intc BCR to confirm that Linux default priority is avail
62 	 * in h/w
63 	 *
64 	 * Note:
65 	 *  IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level
66 	 *  is 0 based.
67 	 */
68 	tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF;
69 	if (ARCV2_IRQ_DEF_PRIO > tmp)
70 		panic("Linux default irq prio incorrect\n");
71 }
72 
73 static void arcv2_irq_mask(struct irq_data *data)
74 {
75 	write_aux_reg(AUX_IRQ_SELECT, data->irq);
76 	write_aux_reg(AUX_IRQ_ENABLE, 0);
77 }
78 
79 static void arcv2_irq_unmask(struct irq_data *data)
80 {
81 	write_aux_reg(AUX_IRQ_SELECT, data->irq);
82 	write_aux_reg(AUX_IRQ_ENABLE, 1);
83 }
84 
85 void arcv2_irq_enable(struct irq_data *data)
86 {
87 	/* set default priority */
88 	write_aux_reg(AUX_IRQ_SELECT, data->irq);
89 	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
90 
91 	/*
92 	 * hw auto enables (linux unmask) all by default
93 	 * So no need to do IRQ_ENABLE here
94 	 * XXX: However OSCI LAN need it
95 	 */
96 	write_aux_reg(AUX_IRQ_ENABLE, 1);
97 }
98 
99 static struct irq_chip arcv2_irq_chip = {
100 	.name           = "ARCv2 core Intc",
101 	.irq_mask	= arcv2_irq_mask,
102 	.irq_unmask	= arcv2_irq_unmask,
103 	.irq_enable	= arcv2_irq_enable
104 };
105 
106 static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
107 			 irq_hw_number_t hw)
108 {
109 	if (irq == TIMER0_IRQ || irq == IPI_IRQ)
110 		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);
111 	else
112 		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);
113 
114 	return 0;
115 }
116 
117 static const struct irq_domain_ops arcv2_irq_ops = {
118 	.xlate = irq_domain_xlate_onecell,
119 	.map = arcv2_irq_map,
120 };
121 
122 static struct irq_domain *root_domain;
123 
124 static int __init
125 init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
126 {
127 	if (parent)
128 		panic("DeviceTree incore intc not a root irq controller\n");
129 
130 	root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0,
131 					    &arcv2_irq_ops, NULL);
132 
133 	if (!root_domain)
134 		panic("root irq domain not avail\n");
135 
136 	/* with this we don't need to export root_domain */
137 	irq_set_default_host(root_domain);
138 
139 	return 0;
140 }
141 
142 IRQCHIP_DECLARE(arc_intc, "snps,archs-intc", init_onchip_IRQ);
143