xref: /openbmc/linux/arch/arc/kernel/intc-arcv2.c (revision 51c7b447)
1 /*
2  * Copyright (C) 2014 Synopsys, Inc. (www.synopsys.com)
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  *
8  */
9 
10 #include <linux/interrupt.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/irqdomain.h>
14 #include <linux/irqchip.h>
15 #include <asm/irq.h>
16 
17 #define NR_EXCEPTIONS	16
18 
19 struct bcr_irq_arcv2 {
20 #ifdef CONFIG_CPU_BIG_ENDIAN
21 	unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
22 #else
23 	unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
24 #endif
25 };
26 
27 /*
28  * Early Hardware specific Interrupt setup
29  * -Called very early (start_kernel -> setup_arch -> setup_processor)
30  * -Platform Independent (must for any ARC Core)
31  * -Needed for each CPU (hence not foldable into init_IRQ)
32  */
33 void arc_init_IRQ(void)
34 {
35 	unsigned int tmp, irq_prio, i;
36 	struct bcr_irq_arcv2 irq_bcr;
37 
38 	struct aux_irq_ctrl {
39 #ifdef CONFIG_CPU_BIG_ENDIAN
40 		unsigned int res3:18, save_idx_regs:1, res2:1,
41 			     save_u_to_u:1, save_lp_regs:1, save_blink:1,
42 			     res:4, save_nr_gpr_pairs:5;
43 #else
44 		unsigned int save_nr_gpr_pairs:5, res:4,
45 			     save_blink:1, save_lp_regs:1, save_u_to_u:1,
46 			     res2:1, save_idx_regs:1, res3:18;
47 #endif
48 	} ictrl;
49 
50 	*(unsigned int *)&ictrl = 0;
51 
52 #ifndef CONFIG_ARC_IRQ_NO_AUTOSAVE
53 	ictrl.save_nr_gpr_pairs = 6;	/* r0 to r11 (r12 saved manually) */
54 	ictrl.save_blink = 1;
55 	ictrl.save_lp_regs = 1;		/* LP_COUNT, LP_START, LP_END */
56 	ictrl.save_u_to_u = 0;		/* user ctxt saved on kernel stack */
57 	ictrl.save_idx_regs = 1;	/* JLI, LDI, EI */
58 #endif
59 
60 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
61 
62 	/*
63 	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).
64 	 * Typical builds though have only two levels (0-high, 1-low)
65 	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
66 	 * NMI style interrupts in future (say perf)
67 	 */
68 
69 	READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
70 
71 	irq_prio = irq_bcr.prio;	/* Encoded as N-1 for N levels */
72 	pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
73 		irq_prio + 1, ARCV2_IRQ_DEF_PRIO,
74 		irq_bcr.firq ? " FIRQ (not used)":"");
75 
76 	/*
77 	 * Set a default priority for all available interrupts to prevent
78 	 * switching of register banks if Fast IRQ and multiple register banks
79 	 * are supported by CPU.
80 	 * Also disable private-per-core IRQ lines so faulty external HW won't
81 	 * trigger interrupt that kernel is not ready to handle.
82 	 */
83 	for (i = NR_EXCEPTIONS; i < irq_bcr.irqs + NR_EXCEPTIONS; i++) {
84 		write_aux_reg(AUX_IRQ_SELECT, i);
85 		write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
86 
87 		/*
88 		 * Only mask cpu private IRQs here.
89 		 * "common" interrupts are masked at IDU, otherwise it would
90 		 * need to be unmasked at each cpu, with IPIs
91 		 */
92 		if (i < FIRST_EXT_IRQ)
93 			write_aux_reg(AUX_IRQ_ENABLE, 0);
94 	}
95 
96 	/* setup status32, don't enable intr yet as kernel doesn't want */
97 	tmp = read_aux_reg(ARC_REG_STATUS32);
98 	tmp |= ARCV2_IRQ_DEF_PRIO << 1;
99 	tmp &= ~STATUS_IE_MASK;
100 	asm volatile("kflag %0	\n"::"r"(tmp));
101 }
102 
103 static void arcv2_irq_mask(struct irq_data *data)
104 {
105 	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
106 	write_aux_reg(AUX_IRQ_ENABLE, 0);
107 }
108 
109 static void arcv2_irq_unmask(struct irq_data *data)
110 {
111 	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
112 	write_aux_reg(AUX_IRQ_ENABLE, 1);
113 }
114 
115 void arcv2_irq_enable(struct irq_data *data)
116 {
117 	/* set default priority */
118 	write_aux_reg(AUX_IRQ_SELECT, data->hwirq);
119 	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
120 
121 	/*
122 	 * hw auto enables (linux unmask) all by default
123 	 * So no need to do IRQ_ENABLE here
124 	 * XXX: However OSCI LAN need it
125 	 */
126 	write_aux_reg(AUX_IRQ_ENABLE, 1);
127 }
128 
129 static struct irq_chip arcv2_irq_chip = {
130 	.name           = "ARCv2 core Intc",
131 	.irq_mask	= arcv2_irq_mask,
132 	.irq_unmask	= arcv2_irq_unmask,
133 	.irq_enable	= arcv2_irq_enable
134 };
135 
136 static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
137 			 irq_hw_number_t hw)
138 {
139 	/*
140 	 * core intc IRQs [16, 23]:
141 	 * Statically assigned always private-per-core (Timers, WDT, IPI, PCT)
142 	 */
143 	if (hw < FIRST_EXT_IRQ) {
144 		/*
145 		 * A subsequent request_percpu_irq() fails if percpu_devid is
146 		 * not set. That in turns sets NOAUTOEN, meaning each core needs
147 		 * to call enable_percpu_irq()
148 		 */
149 		irq_set_percpu_devid(irq);
150 		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);
151 	} else {
152 		irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);
153 	}
154 
155 	return 0;
156 }
157 
158 static const struct irq_domain_ops arcv2_irq_ops = {
159 	.xlate = irq_domain_xlate_onecell,
160 	.map = arcv2_irq_map,
161 };
162 
163 
164 static int __init
165 init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
166 {
167 	struct irq_domain *root_domain;
168 	struct bcr_irq_arcv2 irq_bcr;
169 	unsigned int nr_cpu_irqs;
170 
171 	READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
172 	nr_cpu_irqs = irq_bcr.irqs + NR_EXCEPTIONS;
173 
174 	if (parent)
175 		panic("DeviceTree incore intc not a root irq controller\n");
176 
177 	root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL);
178 	if (!root_domain)
179 		panic("root irq domain not avail\n");
180 
181 	/*
182 	 * Needed for primary domain lookup to succeed
183 	 * This is a primary irqchip, and can never have a parent
184 	 */
185 	irq_set_default_host(root_domain);
186 
187 #ifdef CONFIG_SMP
188 	irq_create_mapping(root_domain, IPI_IRQ);
189 #endif
190 	irq_create_mapping(root_domain, SOFTIRQ_IRQ);
191 
192 	return 0;
193 }
194 
195 IRQCHIP_DECLARE(arc_intc, "snps,archs-intc", init_onchip_IRQ);
196