1/* 2 * ARCv2 ISA based core Low Level Intr/Traps/Exceptions(non-TLB) Handling 3 * 4 * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10 11#include <linux/linkage.h> /* ARC_{EXTRY,EXIT} */ 12#include <asm/entry.h> /* SAVE_ALL_{INT1,INT2,TRAP...} */ 13#include <asm/errno.h> 14#include <asm/arcregs.h> 15#include <asm/irqflags.h> 16 17; A maximum number of supported interrupts in the core interrupt controller. 18; This number is not equal to the maximum interrupt number (256) because 19; first 16 lines are reserved for exceptions and are not configurable. 20#define NR_CPU_IRQS 240 21 22 .cpu HS 23 24#define VECTOR .word 25 26;############################ Vector Table ################################# 27 28 .section .vector,"a",@progbits 29 .align 4 30 31# Initial 16 slots are Exception Vectors 32VECTOR res_service ; Reset Vector 33VECTOR mem_service ; Mem exception 34VECTOR instr_service ; Instrn Error 35VECTOR EV_MachineCheck ; Fatal Machine check 36VECTOR EV_TLBMissI ; Intruction TLB miss 37VECTOR EV_TLBMissD ; Data TLB miss 38VECTOR EV_TLBProtV ; Protection Violation 39VECTOR EV_PrivilegeV ; Privilege Violation 40VECTOR EV_SWI ; Software Breakpoint 41VECTOR EV_Trap ; Trap exception 42VECTOR EV_Extension ; Extn Instruction Exception 43VECTOR EV_DivZero ; Divide by Zero 44VECTOR EV_DCError ; Data Cache Error 45VECTOR EV_Misaligned ; Misaligned Data Access 46VECTOR reserved ; Reserved slots 47VECTOR reserved ; Reserved slots 48 49# Begin Interrupt Vectors 50VECTOR handle_interrupt ; (16) Timer0 51VECTOR handle_interrupt ; unused (Timer1) 52VECTOR handle_interrupt ; unused (WDT) 53VECTOR handle_interrupt ; (19) Inter core Interrupt (IPI) 54VECTOR handle_interrupt ; (20) perf Interrupt 55VECTOR handle_interrupt ; (21) Software Triggered Intr (Self IPI) 56VECTOR handle_interrupt ; unused 57VECTOR handle_interrupt ; (23) unused 58# End of fixed IRQs 59 60.rept NR_CPU_IRQS - 8 61 VECTOR handle_interrupt 62.endr 63 64 .section .text, "ax",@progbits 65 66reserved: 67 flag 1 ; Unexpected event, halt 68 69;##################### Interrupt Handling ############################## 70 71ENTRY(handle_interrupt) 72 73 INTERRUPT_PROLOGUE irq 74 75 # irq control APIs local_irq_save/restore/disable/enable fiddle with 76 # global interrupt enable bits in STATUS32 (.IE for 1 prio, .E[] for 2 prio) 77 # However a taken interrupt doesn't clear these bits. Thus irqs_disabled() 78 # query in hard ISR path would return false (since .IE is set) which would 79 # trips genirq interrupt handling asserts. 80 # 81 # So do a "soft" disable of interrutps here. 82 # 83 # Note this disable is only for consistent book-keeping as further interrupts 84 # will be disabled anyways even w/o this. Hardware tracks active interrupts 85 # seperately in AUX_IRQ_ACTIVE.active and will not take new interrupts 86 # unless this one returns (or higher prio becomes pending in 2-prio scheme) 87 88 IRQ_DISABLE 89 90 ; icause is banked: one per priority level 91 ; so a higher prio interrupt taken here won't clobber prev prio icause 92 lr r0, [ICAUSE] 93 mov blink, ret_from_exception 94 95 b.d arch_do_IRQ 96 mov r1, sp 97 98END(handle_interrupt) 99 100;################### Non TLB Exception Handling ############################# 101 102ENTRY(EV_SWI) 103 ; TODO: implement this 104 EXCEPTION_PROLOGUE 105 b ret_from_exception 106END(EV_SWI) 107 108ENTRY(EV_DivZero) 109 ; TODO: implement this 110 EXCEPTION_PROLOGUE 111 b ret_from_exception 112END(EV_DivZero) 113 114ENTRY(EV_DCError) 115 ; TODO: implement this 116 EXCEPTION_PROLOGUE 117 b ret_from_exception 118END(EV_DCError) 119 120; --------------------------------------------- 121; Memory Error Exception Handler 122; - Unlike ARCompact, handles Bus errors for both User/Kernel mode, 123; Instruction fetch or Data access, under a single Exception Vector 124; --------------------------------------------- 125 126ENTRY(mem_service) 127 128 EXCEPTION_PROLOGUE 129 130 lr r0, [efa] 131 mov r1, sp 132 133 FAKE_RET_FROM_EXCPN 134 135 bl do_memory_error 136 b ret_from_exception 137END(mem_service) 138 139ENTRY(EV_Misaligned) 140 141 EXCEPTION_PROLOGUE 142 143 lr r0, [efa] ; Faulting Data address 144 mov r1, sp 145 146 FAKE_RET_FROM_EXCPN 147 148 SAVE_CALLEE_SAVED_USER 149 mov r2, sp ; callee_regs 150 151 bl do_misaligned_access 152 153 ; TBD: optimize - do this only if a callee reg was involved 154 ; either a dst of emulated LD/ST or src with address-writeback 155 RESTORE_CALLEE_SAVED_USER 156 157 b ret_from_exception 158END(EV_Misaligned) 159 160; --------------------------------------------- 161; Protection Violation Exception Handler 162; --------------------------------------------- 163 164ENTRY(EV_TLBProtV) 165 166 EXCEPTION_PROLOGUE 167 168 lr r0, [efa] ; Faulting Data address 169 mov r1, sp ; pt_regs 170 171 FAKE_RET_FROM_EXCPN 172 173 mov blink, ret_from_exception 174 b do_page_fault 175 176END(EV_TLBProtV) 177 178; From Linux standpoint Slow Path I/D TLB Miss is same a ProtV as they 179; need to call do_page_fault(). 180; ECR in pt_regs provides whether access was R/W/X 181 182.global call_do_page_fault 183.set call_do_page_fault, EV_TLBProtV 184 185;############# Common Handlers for ARCompact and ARCv2 ############## 186 187#include "entry.S" 188 189;############# Return from Intr/Excp/Trap (ARCv2 ISA Specifics) ############## 190; 191; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap) 192; IRQ shd definitely not happen between now and rtie 193; All 2 entry points to here already disable interrupts 194 195.Lrestore_regs: 196restore_regs: 197 198 # Interrpts are actually disabled from this point on, but will get 199 # reenabled after we return from interrupt/exception. 200 # But irq tracer needs to be told now... 201 TRACE_ASM_IRQ_ENABLE 202 203 ld r0, [sp, PT_status32] ; U/K mode at time of entry 204 lr r10, [AUX_IRQ_ACT] 205 206 bmsk r11, r10, 15 ; AUX_IRQ_ACT.ACTIVE 207 breq r11, 0, .Lexcept_ret ; No intr active, ret from Exception 208 209;####### Return from Intr ####### 210 211debug_marker_l1: 212 bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot 213 214.Lisr_ret_fast_path: 215 ; Handle special case #1: (Entry via Exception, Return via IRQ) 216 ; 217 ; Exception in U mode, preempted in kernel, Intr taken (K mode), orig 218 ; task now returning to U mode (riding the Intr) 219 ; AUX_IRQ_ACTIVE won't have U bit set (since intr in K mode), hence SP 220 ; won't be switched to correct U mode value (from AUX_SP) 221 ; So force AUX_IRQ_ACT.U for such a case 222 223 btst r0, STATUS_U_BIT ; Z flag set if K (Z clear for U) 224 bset.nz r11, r11, AUX_IRQ_ACT_BIT_U ; NZ means U 225 sr r11, [AUX_IRQ_ACT] 226 227 INTERRUPT_EPILOGUE irq 228 rtie 229 230;####### Return from Exception / pure kernel mode ####### 231 232.Lexcept_ret: ; Expects r0 has PT_status32 233 234debug_marker_syscall: 235 EXCEPTION_EPILOGUE 236 rtie 237 238;####### Return from Intr to insn in delay slot ####### 239 240; Handle special case #2: (Entry via Exception in Delay Slot, Return via IRQ) 241; 242; Intr returning to a Delay Slot (DS) insn 243; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig 244; entry was via Exception in DS which got preempted in kernel). 245; 246; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround 247; 248; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline 249; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly 250 251.Lintr_ret_to_delay_slot: 252debug_marker_ds: 253 254 ld r2, [@intr_to_DE_cnt] 255 add r2, r2, 1 256 st r2, [@intr_to_DE_cnt] 257 258 ld r2, [sp, PT_ret] 259 ld r3, [sp, PT_status32] 260 261 ; STAT32 for Int return created from scratch 262 ; (No delay dlot, disable Further intr in trampoline) 263 264 bic r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK 265 st r0, [sp, PT_status32] 266 267 mov r1, .Lintr_ret_to_delay_slot_2 268 st r1, [sp, PT_ret] 269 270 ; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots 271 st r2, [sp, 0] 272 st r3, [sp, 4] 273 274 b .Lisr_ret_fast_path 275 276.Lintr_ret_to_delay_slot_2: 277 ; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP 278 sub sp, sp, SZ_PT_REGS 279 st r9, [sp, -4] 280 281 ld r9, [sp, 0] 282 sr r9, [eret] 283 284 ld r9, [sp, 4] 285 sr r9, [erstatus] 286 287 ; restore AUX_USER_SP if returning to U mode 288 bbit0 r9, STATUS_U_BIT, 1f 289 ld r9, [sp, PT_sp] 290 sr r9, [AUX_USER_SP] 291 2921: 293 ld r9, [sp, 8] 294 sr r9, [erbta] 295 296 ld r9, [sp, -4] 297 add sp, sp, SZ_PT_REGS 298 299 ; return from pure kernel mode to delay slot 300 rtie 301 302END(ret_from_exception) 303