1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * ARCv2 ISA based core Low Level Intr/Traps/Exceptions(non-TLB) Handling 4 * 5 * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) 6 */ 7 8#include <linux/linkage.h> /* ARC_{EXTRY,EXIT} */ 9#include <asm/entry.h> /* SAVE_ALL_{INT1,INT2,TRAP...} */ 10#include <asm/errno.h> 11#include <asm/arcregs.h> 12#include <asm/irqflags.h> 13#include <asm/mmu.h> 14 15; A maximum number of supported interrupts in the core interrupt controller. 16; This number is not equal to the maximum interrupt number (256) because 17; first 16 lines are reserved for exceptions and are not configurable. 18#define NR_CPU_IRQS 240 19 20 .cpu HS 21 22#define VECTOR .word 23 24;############################ Vector Table ################################# 25 26 .section .vector,"a",@progbits 27 .align 4 28 29# Initial 16 slots are Exception Vectors 30VECTOR res_service ; Reset Vector 31VECTOR mem_service ; Mem exception 32VECTOR instr_service ; Instrn Error 33VECTOR EV_MachineCheck ; Fatal Machine check 34VECTOR EV_TLBMissI ; Intruction TLB miss 35VECTOR EV_TLBMissD ; Data TLB miss 36VECTOR EV_TLBProtV ; Protection Violation 37VECTOR EV_PrivilegeV ; Privilege Violation 38VECTOR EV_SWI ; Software Breakpoint 39VECTOR EV_Trap ; Trap exception 40VECTOR EV_Extension ; Extn Instruction Exception 41VECTOR EV_DivZero ; Divide by Zero 42VECTOR EV_DCError ; Data Cache Error 43VECTOR EV_Misaligned ; Misaligned Data Access 44VECTOR reserved ; Reserved slots 45VECTOR reserved ; Reserved slots 46 47# Begin Interrupt Vectors 48VECTOR handle_interrupt ; (16) Timer0 49VECTOR handle_interrupt ; unused (Timer1) 50VECTOR handle_interrupt ; unused (WDT) 51VECTOR handle_interrupt ; (19) Inter core Interrupt (IPI) 52VECTOR handle_interrupt ; (20) perf Interrupt 53VECTOR handle_interrupt ; (21) Software Triggered Intr (Self IPI) 54VECTOR handle_interrupt ; unused 55VECTOR handle_interrupt ; (23) unused 56# End of fixed IRQs 57 58.rept NR_CPU_IRQS - 8 59 VECTOR handle_interrupt 60.endr 61 62 .section .text, "ax",@progbits 63 64reserved: 65 flag 1 ; Unexpected event, halt 66 67;##################### Interrupt Handling ############################## 68 69ENTRY(handle_interrupt) 70 71 INTERRUPT_PROLOGUE 72 73 # irq control APIs local_irq_save/restore/disable/enable fiddle with 74 # global interrupt enable bits in STATUS32 (.IE for 1 prio, .E[] for 2 prio) 75 # However a taken interrupt doesn't clear these bits. Thus irqs_disabled() 76 # query in hard ISR path would return false (since .IE is set) which would 77 # trips genirq interrupt handling asserts. 78 # 79 # So do a "soft" disable of interrutps here. 80 # 81 # Note this disable is only for consistent book-keeping as further interrupts 82 # will be disabled anyways even w/o this. Hardware tracks active interrupts 83 # seperately in AUX_IRQ_ACT.active and will not take new interrupts 84 # unless this one returns (or higher prio becomes pending in 2-prio scheme) 85 86 IRQ_DISABLE 87 88 ; icause is banked: one per priority level 89 ; so a higher prio interrupt taken here won't clobber prev prio icause 90 lr r0, [ICAUSE] 91 mov blink, ret_from_exception 92 93 b.d arch_do_IRQ 94 mov r1, sp 95 96END(handle_interrupt) 97 98;################### Non TLB Exception Handling ############################# 99 100ENTRY(EV_SWI) 101 ; TODO: implement this 102 EXCEPTION_PROLOGUE 103 b ret_from_exception 104END(EV_SWI) 105 106ENTRY(EV_DivZero) 107 ; TODO: implement this 108 EXCEPTION_PROLOGUE 109 b ret_from_exception 110END(EV_DivZero) 111 112ENTRY(EV_DCError) 113 ; TODO: implement this 114 EXCEPTION_PROLOGUE 115 b ret_from_exception 116END(EV_DCError) 117 118; --------------------------------------------- 119; Memory Error Exception Handler 120; - Unlike ARCompact, handles Bus errors for both User/Kernel mode, 121; Instruction fetch or Data access, under a single Exception Vector 122; --------------------------------------------- 123 124ENTRY(mem_service) 125 126 EXCEPTION_PROLOGUE 127 128 bl do_memory_error 129 b ret_from_exception 130END(mem_service) 131 132ENTRY(EV_Misaligned) 133 134 EXCEPTION_PROLOGUE 135 136 SAVE_CALLEE_SAVED_USER 137 mov r2, sp ; callee_regs 138 139 bl do_misaligned_access 140 141 ; TBD: optimize - do this only if a callee reg was involved 142 ; either a dst of emulated LD/ST or src with address-writeback 143 RESTORE_CALLEE_SAVED_USER 144 145 b ret_from_exception 146END(EV_Misaligned) 147 148; --------------------------------------------- 149; Protection Violation Exception Handler 150; --------------------------------------------- 151 152ENTRY(EV_TLBProtV) 153 154 EXCEPTION_PROLOGUE 155 156 mov blink, ret_from_exception 157 b do_page_fault 158 159END(EV_TLBProtV) 160 161; From Linux standpoint Slow Path I/D TLB Miss is same a ProtV as they 162; need to call do_page_fault(). 163; ECR in pt_regs provides whether access was R/W/X 164 165.global call_do_page_fault 166.set call_do_page_fault, EV_TLBProtV 167 168;############# Common Handlers for ARCompact and ARCv2 ############## 169 170#include "entry.S" 171 172;############# Return from Intr/Excp/Trap (ARCv2 ISA Specifics) ############## 173; 174; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap) 175; IRQ shd definitely not happen between now and rtie 176; All 2 entry points to here already disable interrupts 177 178.Lrestore_regs: 179restore_regs: 180 181 # Interrpts are actually disabled from this point on, but will get 182 # reenabled after we return from interrupt/exception. 183 # But irq tracer needs to be told now... 184 TRACE_ASM_IRQ_ENABLE 185 186 ld r0, [sp, PT_status32] ; U/K mode at time of entry 187 lr r10, [AUX_IRQ_ACT] 188 189 bmsk r11, r10, 15 ; extract AUX_IRQ_ACT.active 190 breq r11, 0, .Lexcept_ret ; No intr active, ret from Exception 191 192;####### Return from Intr ####### 193 194.Lisr_ret: 195 196debug_marker_l1: 197 ; bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot 198 btst r0, STATUS_DE_BIT ; Z flag set if bit clear 199 bnz .Lintr_ret_to_delay_slot ; branch if STATUS_DE_BIT set 200 201 ; Handle special case #1: (Entry via Exception, Return via IRQ) 202 ; 203 ; Exception in U mode, preempted in kernel, Intr taken (K mode), orig 204 ; task now returning to U mode (riding the Intr) 205 ; AUX_IRQ_ACTIVE won't have U bit set (since intr in K mode), hence SP 206 ; won't be switched to correct U mode value (from AUX_SP) 207 ; So force AUX_IRQ_ACT.U for such a case 208 209 btst r0, STATUS_U_BIT ; Z flag set if K (Z clear for U) 210 bset.nz r11, r11, AUX_IRQ_ACT_BIT_U ; NZ means U 211 sr r11, [AUX_IRQ_ACT] 212 213 INTERRUPT_EPILOGUE 214 rtie 215 216;####### Return from Exception / pure kernel mode ####### 217 218.Lexcept_ret: ; Expects r0 has PT_status32 219 220debug_marker_syscall: 221 EXCEPTION_EPILOGUE 222 rtie 223 224;####### Return from Intr to insn in delay slot ####### 225 226; Handle special case #2: (Entry via Exception in Delay Slot, Return via IRQ) 227; 228; Intr returning to a Delay Slot (DS) insn 229; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig 230; entry was via Exception in DS which got preempted in kernel). 231; 232; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround 233; 234; Solution is to drop out of interrupt context into pure kernel mode 235; and return from pure kernel mode which does right things for delay slot 236 237.Lintr_ret_to_delay_slot: 238debug_marker_ds: 239 240 ld r2, [@intr_to_DE_cnt] 241 add r2, r2, 1 242 st r2, [@intr_to_DE_cnt] 243 244 ; drop out of interrupt context (clear AUX_IRQ_ACT.active) 245 bmskn r11, r10, 15 246 sr r11, [AUX_IRQ_ACT] 247 b .Lexcept_ret 248 249END(ret_from_exception) 250