xref: /openbmc/linux/arch/arc/include/asm/cache.h (revision da1d9caf)
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4  */
5 
6 #ifndef __ARC_ASM_CACHE_H
7 #define __ARC_ASM_CACHE_H
8 
9 /* In case $$ not config, setup a dummy number for rest of kernel */
10 #ifndef CONFIG_ARC_CACHE_LINE_SHIFT
11 #define L1_CACHE_SHIFT		6
12 #else
13 #define L1_CACHE_SHIFT		CONFIG_ARC_CACHE_LINE_SHIFT
14 #endif
15 
16 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
17 #define CACHE_LINE_MASK		(~(L1_CACHE_BYTES - 1))
18 
19 /*
20  * ARC700 doesn't cache any access in top 1G (0xc000_0000 to 0xFFFF_FFFF)
21  * Ideal for wiring memory mapped peripherals as we don't need to do
22  * explicit uncached accesses (LD.di/ST.di) hence more portable drivers
23  */
24 #define ARC_UNCACHED_ADDR_SPACE	0xc0000000
25 
26 #ifndef __ASSEMBLY__
27 
28 #include <linux/build_bug.h>
29 
30 /* Uncached access macros */
31 #define arc_read_uncached_32(ptr)	\
32 ({					\
33 	unsigned int __ret;		\
34 	__asm__ __volatile__(		\
35 	"	ld.di %0, [%1]	\n"	\
36 	: "=r"(__ret)			\
37 	: "r"(ptr));			\
38 	__ret;				\
39 })
40 
41 #define arc_write_uncached_32(ptr, data)\
42 ({					\
43 	__asm__ __volatile__(		\
44 	"	st.di %0, [%1]	\n"	\
45 	:				\
46 	: "r"(data), "r"(ptr));		\
47 })
48 
49 /* Largest line length for either L1 or L2 is 128 bytes */
50 #define SMP_CACHE_BYTES		128
51 #define cache_line_size()	SMP_CACHE_BYTES
52 #define ARCH_DMA_MINALIGN	SMP_CACHE_BYTES
53 
54 /*
55  * Make sure slab-allocated buffers are 64-bit aligned when atomic64_t uses
56  * ARCv2 64-bit atomics (LLOCKD/SCONDD). This guarantess runtime 64-bit
57  * alignment for any atomic64_t embedded in buffer.
58  * Default ARCH_SLAB_MINALIGN is __alignof__(long long) which has a relaxed
59  * value of 4 (and not 8) in ARC ABI.
60  */
61 #if defined(CONFIG_ARC_HAS_LL64) && defined(CONFIG_ARC_HAS_LLSC)
62 #define ARCH_SLAB_MINALIGN	8
63 #endif
64 
65 extern int ioc_enable;
66 extern unsigned long perip_base, perip_end;
67 
68 #endif	/* !__ASSEMBLY__ */
69 
70 /* Instruction cache related Auxiliary registers */
71 #define ARC_REG_IC_BCR		0x77	/* Build Config reg */
72 #define ARC_REG_IC_IVIC		0x10
73 #define ARC_REG_IC_CTRL		0x11
74 #define ARC_REG_IC_IVIR		0x16
75 #define ARC_REG_IC_ENDR		0x17
76 #define ARC_REG_IC_IVIL		0x19
77 #define ARC_REG_IC_PTAG		0x1E
78 #define ARC_REG_IC_PTAG_HI	0x1F
79 
80 /* Bit val in IC_CTRL */
81 #define IC_CTRL_DIS		0x1
82 
83 /* Data cache related Auxiliary registers */
84 #define ARC_REG_DC_BCR		0x72	/* Build Config reg */
85 #define ARC_REG_DC_IVDC		0x47
86 #define ARC_REG_DC_CTRL		0x48
87 #define ARC_REG_DC_IVDL		0x4A
88 #define ARC_REG_DC_FLSH		0x4B
89 #define ARC_REG_DC_FLDL		0x4C
90 #define ARC_REG_DC_STARTR	0x4D
91 #define ARC_REG_DC_ENDR		0x4E
92 #define ARC_REG_DC_PTAG		0x5C
93 #define ARC_REG_DC_PTAG_HI	0x5F
94 
95 /* Bit val in DC_CTRL */
96 #define DC_CTRL_DIS		0x001
97 #define DC_CTRL_INV_MODE_FLUSH	0x040
98 #define DC_CTRL_FLUSH_STATUS	0x100
99 #define DC_CTRL_RGN_OP_INV	0x200
100 #define DC_CTRL_RGN_OP_MSK	0x200
101 
102 /*System-level cache (L2 cache) related Auxiliary registers */
103 #define ARC_REG_SLC_CFG		0x901
104 #define ARC_REG_SLC_CTRL	0x903
105 #define ARC_REG_SLC_FLUSH	0x904
106 #define ARC_REG_SLC_INVALIDATE	0x905
107 #define ARC_AUX_SLC_IVDL	0x910
108 #define ARC_AUX_SLC_FLDL	0x912
109 #define ARC_REG_SLC_RGN_START	0x914
110 #define ARC_REG_SLC_RGN_START1	0x915
111 #define ARC_REG_SLC_RGN_END	0x916
112 #define ARC_REG_SLC_RGN_END1	0x917
113 
114 /* Bit val in SLC_CONTROL */
115 #define SLC_CTRL_DIS		0x001
116 #define SLC_CTRL_IM		0x040
117 #define SLC_CTRL_BUSY		0x100
118 #define SLC_CTRL_RGN_OP_INV	0x200
119 
120 /* IO coherency related Auxiliary registers */
121 #define ARC_REG_IO_COH_ENABLE	0x500
122 #define ARC_IO_COH_ENABLE_BIT	BIT(0)
123 #define ARC_REG_IO_COH_PARTIAL	0x501
124 #define ARC_IO_COH_PARTIAL_BIT	BIT(0)
125 #define ARC_REG_IO_COH_AP0_BASE	0x508
126 #define ARC_REG_IO_COH_AP0_SIZE	0x509
127 
128 #endif /* _ASM_CACHE_H */
129