1/* 2 * Support for peripherals on the AXS10x mainboard 3 * 4 * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10 11/ { 12 axs10x_mb { 13 compatible = "simple-bus"; 14 #address-cells = <1>; 15 #size-cells = <1>; 16 ranges = <0x00000000 0x0 0xe0000000 0x10000000>; 17 interrupt-parent = <&mb_intc>; 18 19 creg_rst: reset-controller@11220 { 20 compatible = "snps,axs10x-reset"; 21 #reset-cells = <1>; 22 reg = <0x11220 0x4>; 23 }; 24 25 i2sclk: i2sclk@100a0 { 26 compatible = "snps,axs10x-i2s-pll-clock"; 27 reg = <0x100a0 0x10>; 28 clocks = <&i2spll_clk>; 29 #clock-cells = <0>; 30 }; 31 32 clocks { 33 i2spll_clk: i2spll_clk { 34 compatible = "fixed-clock"; 35 clock-frequency = <27000000>; 36 #clock-cells = <0>; 37 }; 38 39 i2cclk: i2cclk { 40 compatible = "fixed-clock"; 41 clock-frequency = <50000000>; 42 #clock-cells = <0>; 43 }; 44 45 apbclk: apbclk { 46 compatible = "fixed-clock"; 47 clock-frequency = <50000000>; 48 #clock-cells = <0>; 49 }; 50 51 mmcclk: mmcclk { 52 compatible = "fixed-clock"; 53 /* 54 * DW sdio controller has external ciu clock divider 55 * controlled via register in SDIO IP. It divides 56 * sdio_ref_clk (which comes from CGU) by 16 for 57 * default. So default mmcclk clock (which comes 58 * to sdk_in) is 25000000 Hz. 59 */ 60 clock-frequency = <25000000>; 61 #clock-cells = <0>; 62 }; 63 64 pguclk: pguclk { 65 #clock-cells = <0>; 66 compatible = "fixed-clock"; 67 clock-frequency = <74250000>; 68 }; 69 }; 70 71 ethernet@0x18000 { 72 #interrupt-cells = <1>; 73 compatible = "snps,dwmac"; 74 reg = < 0x18000 0x2000 >; 75 interrupts = < 4 >; 76 interrupt-names = "macirq"; 77 phy-mode = "rgmii"; 78 snps,pbl = < 32 >; 79 clocks = <&apbclk>; 80 clock-names = "stmmaceth"; 81 max-speed = <100>; 82 resets = <&creg_rst 5>; 83 reset-names = "stmmaceth"; 84 }; 85 86 ehci@0x40000 { 87 compatible = "generic-ehci"; 88 reg = < 0x40000 0x100 >; 89 interrupts = < 8 >; 90 }; 91 92 ohci@0x60000 { 93 compatible = "generic-ohci"; 94 reg = < 0x60000 0x100 >; 95 interrupts = < 8 >; 96 }; 97 98 /* 99 * According to DW Mobile Storage databook it is required 100 * to use "Hold Register" if card is enumerated in SDR12 or 101 * SDR25 modes. 102 * 103 * Utilization of "Hold Register" is already implemented via 104 * dw_mci_pltfm_prepare_command() which in its turn gets 105 * used through dw_mci_drv_data->prepare_command call-back. 106 * This call-back is used in Altera Socfpga platform and so 107 * we may reuse it saying that we're compatible with their 108 * "altr,socfpga-dw-mshc". 109 * 110 * Most probably "Hold Register" utilization is platform- 111 * independent requirement which means that single unified 112 * "snps,dw-mshc" should be enough for all users of DW MMC once 113 * dw_mci_pltfm_prepare_command() is used in generic platform 114 * code. 115 */ 116 mmc@0x15000 { 117 compatible = "altr,socfpga-dw-mshc"; 118 reg = < 0x15000 0x400 >; 119 fifo-depth = < 16 >; 120 card-detect-delay = < 200 >; 121 clocks = <&apbclk>, <&mmcclk>; 122 clock-names = "biu", "ciu"; 123 interrupts = < 7 >; 124 bus-width = < 4 >; 125 }; 126 127 uart@0x20000 { 128 compatible = "snps,dw-apb-uart"; 129 reg = <0x20000 0x100>; 130 clock-frequency = <33333333>; 131 interrupts = <17>; 132 baud = <115200>; 133 reg-shift = <2>; 134 reg-io-width = <4>; 135 }; 136 137 uart@0x21000 { 138 compatible = "snps,dw-apb-uart"; 139 reg = <0x21000 0x100>; 140 clock-frequency = <33333333>; 141 interrupts = <18>; 142 baud = <115200>; 143 reg-shift = <2>; 144 reg-io-width = <4>; 145 }; 146 147 /* UART muxed with USB data port (ttyS3) */ 148 uart@0x22000 { 149 compatible = "snps,dw-apb-uart"; 150 reg = <0x22000 0x100>; 151 clock-frequency = <33333333>; 152 interrupts = <19>; 153 baud = <115200>; 154 reg-shift = <2>; 155 reg-io-width = <4>; 156 }; 157 158 i2c@0x1d000 { 159 compatible = "snps,designware-i2c"; 160 reg = <0x1d000 0x100>; 161 clock-frequency = <400000>; 162 clocks = <&i2cclk>; 163 interrupts = <14>; 164 }; 165 166 i2s: i2s@1e000 { 167 compatible = "snps,designware-i2s"; 168 reg = <0x1e000 0x100>; 169 clocks = <&i2sclk 0>; 170 clock-names = "i2sclk"; 171 interrupts = <15>; 172 #sound-dai-cells = <0>; 173 }; 174 175 i2c@0x1f000 { 176 compatible = "snps,designware-i2c"; 177 #address-cells = <1>; 178 #size-cells = <0>; 179 reg = <0x1f000 0x100>; 180 clock-frequency = <400000>; 181 clocks = <&i2cclk>; 182 interrupts = <16>; 183 184 adv7511:adv7511@39{ 185 compatible="adi,adv7511"; 186 reg = <0x39>; 187 interrupts = <23>; 188 adi,input-depth = <8>; 189 adi,input-colorspace = "rgb"; 190 adi,input-clock = "1x"; 191 adi,clock-delay = <0x03>; 192 #sound-dai-cells = <0>; 193 194 ports { 195 #address-cells = <1>; 196 #size-cells = <0>; 197 198 /* RGB/YUV input */ 199 port@0 { 200 reg = <0>; 201 adv7511_input:endpoint { 202 remote-endpoint = <&pgu_output>; 203 }; 204 }; 205 206 /* HDMI output */ 207 port@1 { 208 reg = <1>; 209 adv7511_output: endpoint { 210 remote-endpoint = <&hdmi_connector_in>; 211 }; 212 }; 213 }; 214 }; 215 216 eeprom@0x54{ 217 compatible = "atmel,24c01"; 218 reg = <0x54>; 219 pagesize = <0x8>; 220 }; 221 222 eeprom@0x57{ 223 compatible = "atmel,24c04"; 224 reg = <0x57>; 225 pagesize = <0x8>; 226 }; 227 }; 228 229 hdmi0: connector { 230 compatible = "hdmi-connector"; 231 type = "a"; 232 port { 233 hdmi_connector_in: endpoint { 234 remote-endpoint = <&adv7511_output>; 235 }; 236 }; 237 }; 238 239 gpio0:gpio@13000 { 240 compatible = "snps,dw-apb-gpio"; 241 reg = <0x13000 0x1000>; 242 #address-cells = <1>; 243 #size-cells = <0>; 244 245 gpio0_banka: gpio-controller@0 { 246 compatible = "snps,dw-apb-gpio-port"; 247 gpio-controller; 248 #gpio-cells = <2>; 249 snps,nr-gpios = <32>; 250 reg = <0>; 251 }; 252 253 gpio0_bankb: gpio-controller@1 { 254 compatible = "snps,dw-apb-gpio-port"; 255 gpio-controller; 256 #gpio-cells = <2>; 257 snps,nr-gpios = <8>; 258 reg = <1>; 259 }; 260 261 gpio0_bankc: gpio-controller@2 { 262 compatible = "snps,dw-apb-gpio-port"; 263 gpio-controller; 264 #gpio-cells = <2>; 265 snps,nr-gpios = <8>; 266 reg = <2>; 267 }; 268 }; 269 270 gpio1:gpio@14000 { 271 compatible = "snps,dw-apb-gpio"; 272 reg = <0x14000 0x1000>; 273 #address-cells = <1>; 274 #size-cells = <0>; 275 276 gpio1_banka: gpio-controller@0 { 277 compatible = "snps,dw-apb-gpio-port"; 278 gpio-controller; 279 #gpio-cells = <2>; 280 snps,nr-gpios = <30>; 281 reg = <0>; 282 }; 283 284 gpio1_bankb: gpio-controller@1 { 285 compatible = "snps,dw-apb-gpio-port"; 286 gpio-controller; 287 #gpio-cells = <2>; 288 snps,nr-gpios = <10>; 289 reg = <1>; 290 }; 291 292 gpio1_bankc: gpio-controller@2 { 293 compatible = "snps,dw-apb-gpio-port"; 294 gpio-controller; 295 #gpio-cells = <2>; 296 snps,nr-gpios = <8>; 297 reg = <2>; 298 }; 299 }; 300 301 pgu@17000 { 302 compatible = "snps,arcpgu"; 303 reg = <0x17000 0x400>; 304 encoder-slave = <&adv7511>; 305 clocks = <&pguclk>; 306 clock-names = "pxlclk"; 307 memory-region = <&frame_buffer>; 308 port { 309 pgu_output: endpoint { 310 remote-endpoint = <&adv7511_input>; 311 }; 312 }; 313 }; 314 315 sound_playback { 316 compatible = "simple-audio-card"; 317 simple-audio-card,name = "AXS10x HDMI Audio"; 318 simple-audio-card,format = "i2s"; 319 simple-audio-card,cpu { 320 sound-dai = <&i2s>; 321 }; 322 simple-audio-card,codec { 323 sound-dai = <&adv7511>; 324 }; 325 }; 326 }; 327}; 328