xref: /openbmc/linux/arch/arc/Kconfig (revision 6189f1b0) 
1#
2# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3#
4# This program is free software; you can redistribute it and/or modify
5# it under the terms of the GNU General Public License version 2 as
6# published by the Free Software Foundation.
7#
8
9config ARC
10	def_bool y
11	select BUILDTIME_EXTABLE_SORT
12	select COMMON_CLK
13	select CLONE_BACKWARDS
14	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
15	select DEVTMPFS if !INITRAMFS_SOURCE=""
16	select GENERIC_ATOMIC64
17	select GENERIC_CLOCKEVENTS
18	select GENERIC_FIND_FIRST_BIT
19	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
20	select GENERIC_IRQ_SHOW
21	select GENERIC_PENDING_IRQ if SMP
22	select GENERIC_SMP_IDLE_THREAD
23	select HAVE_ARCH_KGDB
24	select HAVE_ARCH_TRACEHOOK
25	select HAVE_IOREMAP_PROT
26	select HAVE_KPROBES
27	select HAVE_KRETPROBES
28	select HAVE_MEMBLOCK
29	select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND
30	select HAVE_OPROFILE
31	select HAVE_PERF_EVENTS
32	select IRQ_DOMAIN
33	select MODULES_USE_ELF_RELA
34	select NO_BOOTMEM
35	select OF
36	select OF_EARLY_FLATTREE
37	select PERF_USE_VMALLOC
38	select HAVE_DEBUG_STACKOVERFLOW
39
40config TRACE_IRQFLAGS_SUPPORT
41	def_bool y
42
43config LOCKDEP_SUPPORT
44	def_bool y
45
46config SCHED_OMIT_FRAME_POINTER
47	def_bool y
48
49config GENERIC_CSUM
50	def_bool y
51
52config RWSEM_GENERIC_SPINLOCK
53	def_bool y
54
55config ARCH_FLATMEM_ENABLE
56	def_bool y
57
58config MMU
59	def_bool y
60
61config NO_IOPORT_MAP
62	def_bool y
63
64config GENERIC_CALIBRATE_DELAY
65	def_bool y
66
67config GENERIC_HWEIGHT
68	def_bool y
69
70config STACKTRACE_SUPPORT
71	def_bool y
72	select STACKTRACE
73
74config HAVE_LATENCYTOP_SUPPORT
75	def_bool y
76
77source "init/Kconfig"
78source "kernel/Kconfig.freezer"
79
80menu "ARC Architecture Configuration"
81
82menu "ARC Platform/SoC/Board"
83
84source "arch/arc/plat-sim/Kconfig"
85source "arch/arc/plat-tb10x/Kconfig"
86source "arch/arc/plat-axs10x/Kconfig"
87#New platform adds here
88
89endmenu
90
91choice
92	prompt "ARC Instruction Set"
93	default ISA_ARCOMPACT
94
95config ISA_ARCOMPACT
96	bool "ARCompact ISA"
97	help
98	  The original ARC ISA of ARC600/700 cores
99
100config ISA_ARCV2
101	bool "ARC ISA v2"
102	help
103	  ISA for the Next Generation ARC-HS cores
104
105endchoice
106
107menu "ARC CPU Configuration"
108
109choice
110	prompt "ARC Core"
111	default ARC_CPU_770 if ISA_ARCOMPACT
112	default ARC_CPU_HS if ISA_ARCV2
113
114if ISA_ARCOMPACT
115
116config ARC_CPU_750D
117	bool "ARC750D"
118	select ARC_CANT_LLSC
119	help
120	  Support for ARC750 core
121
122config ARC_CPU_770
123	bool "ARC770"
124	select ARC_HAS_SWAPE
125	help
126	  Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
127	  This core has a bunch of cool new features:
128	  -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
129                   Shared Address Spaces (for sharing TLB entires in MMU)
130	  -Caches: New Prog Model, Region Flush
131	  -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
132
133endif	#ISA_ARCOMPACT
134
135config ARC_CPU_HS
136	bool "ARC-HS"
137	depends on ISA_ARCV2
138	help
139	  Support for ARC HS38x Cores based on ARCv2 ISA
140	  The notable features are:
141	    - SMP configurations of upto 4 core with coherency
142	    - Optional L2 Cache and IO-Coherency
143	    - Revised Interrupt Architecture (multiple priorites, reg banks,
144	        auto stack switch, auto regfile save/restore)
145	    - MMUv4 (PIPT dcache, Huge Pages)
146	    - Instructions for
147		* 64bit load/store: LDD, STD
148		* Hardware assisted divide/remainder: DIV, REM
149		* Function prologue/epilogue: ENTER_S, LEAVE_S
150		* IRQ enable/disable: CLRI, SETI
151		* pop count: FFS, FLS
152		* SETcc, BMSKN, XBFU...
153
154endchoice
155
156config CPU_BIG_ENDIAN
157	bool "Enable Big Endian Mode"
158	default n
159	help
160	  Build kernel for Big Endian Mode of ARC CPU
161
162config SMP
163	bool "Symmetric Multi-Processing"
164	default n
165	select ARC_HAS_COH_CACHES if ISA_ARCV2
166	select ARC_MCIP if ISA_ARCV2
167	help
168	  This enables support for systems with more than one CPU.
169
170if SMP
171
172config ARC_HAS_COH_CACHES
173	def_bool n
174
175config ARC_HAS_REENTRANT_IRQ_LV2
176	def_bool n
177
178config ARC_MCIP
179	bool "ARConnect Multicore IP (MCIP) Support "
180	depends on ISA_ARCV2
181	help
182	  This IP block enables SMP in ARC-HS38 cores.
183	  It provides for cross-core interrupts, multi-core debug
184	  hardware semaphores, shared memory,....
185
186config NR_CPUS
187	int "Maximum number of CPUs (2-4096)"
188	range 2 4096
189	default "4"
190
191endif	#SMP
192
193menuconfig ARC_CACHE
194	bool "Enable Cache Support"
195	default y
196	# if SMP, cache enabled ONLY if ARC implementation has cache coherency
197	depends on !SMP || ARC_HAS_COH_CACHES
198
199if ARC_CACHE
200
201config ARC_CACHE_LINE_SHIFT
202	int "Cache Line Length (as power of 2)"
203	range 5 7
204	default "6"
205	help
206	  Starting with ARC700 4.9, Cache line length is configurable,
207	  This option specifies "N", with Line-len = 2 power N
208	  So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
209	  Linux only supports same line lengths for I and D caches.
210
211config ARC_HAS_ICACHE
212	bool "Use Instruction Cache"
213	default y
214
215config ARC_HAS_DCACHE
216	bool "Use Data Cache"
217	default y
218
219config ARC_CACHE_PAGES
220	bool "Per Page Cache Control"
221	default y
222	depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE
223	help
224	  This can be used to over-ride the global I/D Cache Enable on a
225	  per-page basis (but only for pages accessed via MMU such as
226	  Kernel Virtual address or User Virtual Address)
227	  TLB entries have a per-page Cache Enable Bit.
228	  Note that Global I/D ENABLE + Per Page DISABLE works but corollary
229	  Global DISABLE + Per Page ENABLE won't work
230
231config ARC_CACHE_VIPT_ALIASING
232	bool "Support VIPT Aliasing D$"
233	depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
234	default n
235
236endif	#ARC_CACHE
237
238config ARC_HAS_ICCM
239	bool "Use ICCM"
240	help
241	  Single Cycle RAMS to store Fast Path Code
242	default n
243
244config ARC_ICCM_SZ
245	int "ICCM Size in KB"
246	default "64"
247	depends on ARC_HAS_ICCM
248
249config ARC_HAS_DCCM
250	bool "Use DCCM"
251	help
252	  Single Cycle RAMS to store Fast Path Data
253	default n
254
255config ARC_DCCM_SZ
256	int "DCCM Size in KB"
257	default "64"
258	depends on ARC_HAS_DCCM
259
260config ARC_DCCM_BASE
261	hex "DCCM map address"
262	default "0xA0000000"
263	depends on ARC_HAS_DCCM
264
265config ARC_HAS_HW_MPY
266	bool "Use Hardware Multiplier (Normal or Faster XMAC)"
267	default y
268	help
269	  Influences how gcc generates code for MPY operations.
270	  If enabled, MPYxx insns are generated, provided by Standard/XMAC
271	  Multipler. Otherwise software multipy lib is used
272
273choice
274	prompt "MMU Version"
275	default ARC_MMU_V3 if ARC_CPU_770
276	default ARC_MMU_V2 if ARC_CPU_750D
277	default ARC_MMU_V4 if ARC_CPU_HS
278
279config ARC_MMU_V1
280	bool "MMU v1"
281	help
282	  Orig ARC700 MMU
283
284config ARC_MMU_V2
285	bool "MMU v2"
286	help
287	  Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
288	  when 2 D-TLB and 1 I-TLB entries index into same 2way set.
289
290config ARC_MMU_V3
291	bool "MMU v3"
292	depends on ARC_CPU_770
293	help
294	  Introduced with ARC700 4.10: New Features
295	  Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
296	  Shared Address Spaces (SASID)
297
298config ARC_MMU_V4
299	bool "MMU v4"
300	depends on ISA_ARCV2
301
302endchoice
303
304
305choice
306	prompt "MMU Page Size"
307	default ARC_PAGE_SIZE_8K
308
309config ARC_PAGE_SIZE_8K
310	bool "8KB"
311	help
312	  Choose between 8k vs 16k
313
314config ARC_PAGE_SIZE_16K
315	bool "16KB"
316	depends on ARC_MMU_V3 || ARC_MMU_V4
317
318config ARC_PAGE_SIZE_4K
319	bool "4KB"
320	depends on ARC_MMU_V3 || ARC_MMU_V4
321
322endchoice
323
324if ISA_ARCOMPACT
325
326config ARC_COMPACT_IRQ_LEVELS
327	bool "ARCompact IRQ Priorities: High(2)/Low(1)"
328	default n
329	# Timer HAS to be high priority, for any other high priority config
330	select ARC_IRQ3_LV2
331	# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
332	depends on !SMP || ARC_HAS_REENTRANT_IRQ_LV2
333
334if ARC_COMPACT_IRQ_LEVELS
335
336config ARC_IRQ3_LV2
337	bool
338
339config ARC_IRQ5_LV2
340	bool
341
342config ARC_IRQ6_LV2
343	bool
344
345endif	#ARC_COMPACT_IRQ_LEVELS
346
347config ARC_FPU_SAVE_RESTORE
348	bool "Enable FPU state persistence across context switch"
349	default n
350	help
351	  Double Precision Floating Point unit had dedictaed regs which
352	  need to be saved/restored across context-switch.
353	  Note that ARC FPU is overly simplistic, unlike say x86, which has
354	  hardware pieces to allow software to conditionally save/restore,
355	  based on actual usage of FPU by a task. Thus our implemn does
356	  this for all tasks in system.
357
358endif	#ISA_ARCOMPACT
359
360config ARC_CANT_LLSC
361	def_bool n
362
363config ARC_HAS_LLSC
364	bool "Insn: LLOCK/SCOND (efficient atomic ops)"
365	default y
366	depends on !ARC_CANT_LLSC
367
368config ARC_STAR_9000923308
369	bool "Workaround for llock/scond livelock"
370	default y
371	depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
372
373config ARC_HAS_SWAPE
374	bool "Insn: SWAPE (endian-swap)"
375	default y
376
377if ISA_ARCV2
378
379config ARC_HAS_LL64
380	bool "Insn: 64bit LDD/STD"
381	help
382	  Enable gcc to generate 64-bit load/store instructions
383	  ISA mandates even/odd registers to allow encoding of two
384	  dest operands with 2 possible source operands.
385	default y
386
387config ARC_HAS_DIV_REM
388	bool "Insn: div, divu, rem, remu"
389	default y
390
391config ARC_HAS_RTC
392	bool "Local 64-bit r/o cycle counter"
393	default n
394	depends on !SMP
395
396config ARC_HAS_GRTC
397	bool "SMP synchronized 64-bit cycle counter"
398	default y
399	depends on SMP
400
401config ARC_NUMBER_OF_INTERRUPTS
402	int "Number of interrupts"
403	range 8 240
404	default 32
405	help
406	  This defines the number of interrupts on the ARCv2HS core.
407	  It affects the size of vector table.
408	  The initial 8 IRQs are fixed (Timer, ICI etc) and although configurable
409	  in hardware, it keep things simple for Linux to assume they are always
410	  present.
411
412endif	# ISA_ARCV2
413
414endmenu   # "ARC CPU Configuration"
415
416config LINUX_LINK_BASE
417	hex "Linux Link Address"
418	default "0x80000000"
419	help
420	  ARC700 divides the 32 bit phy address space into two equal halves
421	  -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU
422	  -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel
423	  Typically Linux kernel is linked at the start of untransalted addr,
424	  hence the default value of 0x8zs.
425	  However some customers have peripherals mapped at this addr, so
426	  Linux needs to be scooted a bit.
427	  If you don't know what the above means, leave this setting alone.
428
429config ARC_CURR_IN_REG
430	bool "Dedicate Register r25 for current_task pointer"
431	default y
432	help
433	  This reserved Register R25 to point to Current Task in
434	  kernel mode. This saves memory access for each such access
435
436
437config ARC_EMUL_UNALIGNED
438	bool "Emulate unaligned memory access (userspace only)"
439	default N
440	select SYSCTL_ARCH_UNALIGN_NO_WARN
441	select SYSCTL_ARCH_UNALIGN_ALLOW
442	depends on ISA_ARCOMPACT
443	help
444	  This enables misaligned 16 & 32 bit memory access from user space.
445	  Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
446	  potential bugs in code
447
448config HZ
449	int "Timer Frequency"
450	default 100
451
452config ARC_METAWARE_HLINK
453	bool "Support for Metaware debugger assisted Host access"
454	default n
455	help
456	  This options allows a Linux userland apps to directly access
457	  host file system (open/creat/read/write etc) with help from
458	  Metaware Debugger. This can come in handy for Linux-host communication
459	  when there is no real usable peripheral such as EMAC.
460
461menuconfig ARC_DBG
462	bool "ARC debugging"
463	default y
464
465if ARC_DBG
466
467config ARC_DW2_UNWIND
468	bool "Enable DWARF specific kernel stack unwind"
469	default y
470	select KALLSYMS
471	help
472	  Compiles the kernel with DWARF unwind information and can be used
473	  to get stack backtraces.
474
475	  If you say Y here the resulting kernel image will be slightly larger
476	  but not slower, and it will give very useful debugging information.
477	  If you don't debug the kernel, you can say N, but we may not be able
478	  to solve problems without frame unwind information
479
480config ARC_DBG_TLB_PARANOIA
481	bool "Paranoia Checks in Low Level TLB Handlers"
482	default n
483
484config ARC_DBG_TLB_MISS_COUNT
485	bool "Profile TLB Misses"
486	default n
487	select DEBUG_FS
488	help
489	  Counts number of I and D TLB Misses and exports them via Debugfs
490	  The counters can be cleared via Debugfs as well
491
492if SMP
493
494config ARC_IPI_DBG
495	bool "Debug Inter Core interrupts"
496	default n
497
498endif
499
500endif
501
502config ARC_UBOOT_SUPPORT
503	bool "Support uboot arg Handling"
504	default n
505	help
506	  ARC Linux by default checks for uboot provided args as pointers to
507	  external cmdline or DTB. This however breaks in absence of uboot,
508	  when booting from Metaware debugger directly, as the registers are
509	  not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus
510	  registers look like uboot args to kernel which then chokes.
511	  So only enable the uboot arg checking/processing if users are sure
512	  of uboot being in play.
513
514config ARC_BUILTIN_DTB_NAME
515	string "Built in DTB"
516	help
517	  Set the name of the DTB to embed in the vmlinux binary
518	  Leaving it blank selects the minimal "skeleton" dtb
519
520source "kernel/Kconfig.preempt"
521
522menu "Executable file formats"
523source "fs/Kconfig.binfmt"
524endmenu
525
526endmenu	 # "ARC Architecture Configuration"
527
528source "mm/Kconfig"
529source "net/Kconfig"
530source "drivers/Kconfig"
531source "fs/Kconfig"
532source "arch/arc/Kconfig.debug"
533source "security/Kconfig"
534source "crypto/Kconfig"
535source "lib/Kconfig"
536source "kernel/power/Kconfig"
537