xref: /openbmc/linux/arch/alpha/lib/stxcpy.S (revision a8fe58ce) 
1/*
2 * arch/alpha/lib/stxcpy.S
3 * Contributed by Richard Henderson (rth@tamu.edu)
4 *
5 * Copy a null-terminated string from SRC to DST.
6 *
7 * This is an internal routine used by strcpy, stpcpy, and strcat.
8 * As such, it uses special linkage conventions to make implementation
9 * of these public functions more efficient.
10 *
11 * On input:
12 *	t9 = return address
13 *	a0 = DST
14 *	a1 = SRC
15 *
16 * On output:
17 *	t12 = bitmask (with one bit set) indicating the last byte written
18 *	a0  = unaligned address of the last *word* written
19 *
20 * Furthermore, v0, a3-a5, t11, and t12 are untouched.
21 */
22
23#include <asm/regdef.h>
24
25	.set noat
26	.set noreorder
27
28	.text
29
30/* There is a problem with either gdb (as of 4.16) or gas (as of 2.7) that
31   doesn't like putting the entry point for a procedure somewhere in the
32   middle of the procedure descriptor.  Work around this by putting the
33   aligned copy in its own procedure descriptor */
34
35	.ent stxcpy_aligned
36	.align 3
37stxcpy_aligned:
38	.frame sp, 0, t9
39	.prologue 0
40
41	/* On entry to this basic block:
42	   t0 == the first destination word for masking back in
43	   t1 == the first source word.  */
44
45	/* Create the 1st output word and detect 0's in the 1st input word.  */
46	lda	t2, -1		# e1    : build a mask against false zero
47	mskqh	t2, a1, t2	# e0    :   detection in the src word
48	mskqh	t1, a1, t3	# e0    :
49	ornot	t1, t2, t2	# .. e1 :
50	mskql	t0, a1, t0	# e0    : assemble the first output word
51	cmpbge	zero, t2, t8	# .. e1 : bits set iff null found
52	or	t0, t3, t1	# e0    :
53	bne	t8, $a_eos	# .. e1 :
54
55	/* On entry to this basic block:
56	   t0 == the first destination word for masking back in
57	   t1 == a source word not containing a null.  */
58
59$a_loop:
60	stq_u	t1, 0(a0)	# e0    :
61	addq	a0, 8, a0	# .. e1 :
62	ldq_u	t1, 0(a1)	# e0    :
63	addq	a1, 8, a1	# .. e1 :
64	cmpbge	zero, t1, t8	# e0 (stall)
65	beq	t8, $a_loop	# .. e1 (zdb)
66
67	/* Take care of the final (partial) word store.
68	   On entry to this basic block we have:
69	   t1 == the source word containing the null
70	   t8 == the cmpbge mask that found it.  */
71$a_eos:
72	negq	t8, t6		# e0    : find low bit set
73	and	t8, t6, t12	# e1 (stall)
74
75	/* For the sake of the cache, don't read a destination word
76	   if we're not going to need it.  */
77	and	t12, 0x80, t6	# e0    :
78	bne	t6, 1f		# .. e1 (zdb)
79
80	/* We're doing a partial word store and so need to combine
81	   our source and original destination words.  */
82	ldq_u	t0, 0(a0)	# e0    :
83	subq	t12, 1, t6	# .. e1 :
84	zapnot	t1, t6, t1	# e0    : clear src bytes >= null
85	or	t12, t6, t8	# .. e1 :
86	zap	t0, t8, t0	# e0    : clear dst bytes <= null
87	or	t0, t1, t1	# e1    :
88
891:	stq_u	t1, 0(a0)	# e0    :
90	ret	(t9)		# .. e1 :
91
92	.end stxcpy_aligned
93
94	.align 3
95	.ent __stxcpy
96	.globl __stxcpy
97__stxcpy:
98	.frame sp, 0, t9
99	.prologue 0
100
101	/* Are source and destination co-aligned?  */
102	xor	a0, a1, t0	# e0    :
103	unop			#       :
104	and	t0, 7, t0	# e0    :
105	bne	t0, $unaligned	# .. e1 :
106
107	/* We are co-aligned; take care of a partial first word.  */
108	ldq_u	t1, 0(a1)	# e0    : load first src word
109	and	a0, 7, t0	# .. e1 : take care not to load a word ...
110	addq	a1, 8, a1		# e0    :
111	beq	t0, stxcpy_aligned	# .. e1 : ... if we wont need it
112	ldq_u	t0, 0(a0)	# e0    :
113	br	stxcpy_aligned	# .. e1 :
114
115
116/* The source and destination are not co-aligned.  Align the destination
117   and cope.  We have to be very careful about not reading too much and
118   causing a SEGV.  */
119
120	.align 3
121$u_head:
122	/* We know just enough now to be able to assemble the first
123	   full source word.  We can still find a zero at the end of it
124	   that prevents us from outputting the whole thing.
125
126	   On entry to this basic block:
127	   t0 == the first dest word, for masking back in, if needed else 0
128	   t1 == the low bits of the first source word
129	   t6 == bytemask that is -1 in dest word bytes */
130
131	ldq_u	t2, 8(a1)	# e0    :
132	addq	a1, 8, a1	# .. e1 :
133
134	extql	t1, a1, t1	# e0    :
135	extqh	t2, a1, t4	# e0    :
136	mskql	t0, a0, t0	# e0    :
137	or	t1, t4, t1	# .. e1 :
138	mskqh	t1, a0, t1	# e0    :
139	or	t0, t1, t1	# e1    :
140
141	or	t1, t6, t6	# e0    :
142	cmpbge	zero, t6, t8	# .. e1 :
143	lda	t6, -1		# e0    : for masking just below
144	bne	t8, $u_final	# .. e1 :
145
146	mskql	t6, a1, t6		# e0    : mask out the bits we have
147	or	t6, t2, t2		# e1    :   already extracted before
148	cmpbge	zero, t2, t8		# e0    :   testing eos
149	bne	t8, $u_late_head_exit	# .. e1 (zdb)
150
151	/* Finally, we've got all the stupid leading edge cases taken care
152	   of and we can set up to enter the main loop.  */
153
154	stq_u	t1, 0(a0)	# e0    : store first output word
155	addq	a0, 8, a0	# .. e1 :
156	extql	t2, a1, t0	# e0    : position ho-bits of lo word
157	ldq_u	t2, 8(a1)	# .. e1 : read next high-order source word
158	addq	a1, 8, a1	# e0    :
159	cmpbge	zero, t2, t8	# .. e1 :
160	nop			# e0    :
161	bne	t8, $u_eos	# .. e1 :
162
163	/* Unaligned copy main loop.  In order to avoid reading too much,
164	   the loop is structured to detect zeros in aligned source words.
165	   This has, unfortunately, effectively pulled half of a loop
166	   iteration out into the head and half into the tail, but it does
167	   prevent nastiness from accumulating in the very thing we want
168	   to run as fast as possible.
169
170	   On entry to this basic block:
171	   t0 == the shifted high-order bits from the previous source word
172	   t2 == the unshifted current source word
173
174	   We further know that t2 does not contain a null terminator.  */
175
176	.align 3
177$u_loop:
178	extqh	t2, a1, t1	# e0    : extract high bits for current word
179	addq	a1, 8, a1	# .. e1 :
180	extql	t2, a1, t3	# e0    : extract low bits for next time
181	addq	a0, 8, a0	# .. e1 :
182	or	t0, t1, t1	# e0    : current dst word now complete
183	ldq_u	t2, 0(a1)	# .. e1 : load high word for next time
184	stq_u	t1, -8(a0)	# e0    : save the current word
185	mov	t3, t0		# .. e1 :
186	cmpbge	zero, t2, t8	# e0    : test new word for eos
187	beq	t8, $u_loop	# .. e1 :
188
189	/* We've found a zero somewhere in the source word we just read.
190	   If it resides in the lower half, we have one (probably partial)
191	   word to write out, and if it resides in the upper half, we
192	   have one full and one partial word left to write out.
193
194	   On entry to this basic block:
195	   t0 == the shifted high-order bits from the previous source word
196	   t2 == the unshifted current source word.  */
197$u_eos:
198	extqh	t2, a1, t1	# e0    :
199	or	t0, t1, t1	# e1    : first (partial) source word complete
200
201	cmpbge	zero, t1, t8	# e0    : is the null in this first bit?
202	bne	t8, $u_final	# .. e1 (zdb)
203
204$u_late_head_exit:
205	stq_u	t1, 0(a0)	# e0    : the null was in the high-order bits
206	addq	a0, 8, a0	# .. e1 :
207	extql	t2, a1, t1	# e0    :
208	cmpbge	zero, t1, t8	# .. e1 :
209
210	/* Take care of a final (probably partial) result word.
211	   On entry to this basic block:
212	   t1 == assembled source word
213	   t8 == cmpbge mask that found the null.  */
214$u_final:
215	negq	t8, t6		# e0    : isolate low bit set
216	and	t6, t8, t12	# e1    :
217
218	and	t12, 0x80, t6	# e0    : avoid dest word load if we can
219	bne	t6, 1f		# .. e1 (zdb)
220
221	ldq_u	t0, 0(a0)	# e0    :
222	subq	t12, 1, t6	# .. e1 :
223	or	t6, t12, t8	# e0    :
224	zapnot	t1, t6, t1	# .. e1 : kill source bytes >= null
225	zap	t0, t8, t0	# e0    : kill dest bytes <= null
226	or	t0, t1, t1	# e1    :
227
2281:	stq_u	t1, 0(a0)	# e0    :
229	ret	(t9)		# .. e1 :
230
231	/* Unaligned copy entry point.  */
232	.align 3
233$unaligned:
234
235	ldq_u	t1, 0(a1)	# e0    : load first source word
236
237	and	a0, 7, t4	# .. e1 : find dest misalignment
238	and	a1, 7, t5	# e0    : find src misalignment
239
240	/* Conditionally load the first destination word and a bytemask
241	   with 0xff indicating that the destination byte is sacrosanct.  */
242
243	mov	zero, t0	# .. e1 :
244	mov	zero, t6	# e0    :
245	beq	t4, 1f		# .. e1 :
246	ldq_u	t0, 0(a0)	# e0    :
247	lda	t6, -1		# .. e1 :
248	mskql	t6, a0, t6	# e0    :
2491:
250	subq	a1, t4, a1	# .. e1 : sub dest misalignment from src addr
251
252	/* If source misalignment is larger than dest misalignment, we need
253	   extra startup checks to avoid SEGV.  */
254
255	cmplt	t4, t5, t12	# e0    :
256	beq	t12, $u_head	# .. e1 (zdb)
257
258	lda	t2, -1		# e1    : mask out leading garbage in source
259	mskqh	t2, t5, t2	# e0    :
260	nop			# e0    :
261	ornot	t1, t2, t3	# .. e1 :
262	cmpbge	zero, t3, t8	# e0    : is there a zero?
263	beq	t8, $u_head	# .. e1 (zdb)
264
265	/* At this point we've found a zero in the first partial word of
266	   the source.  We need to isolate the valid source data and mask
267	   it into the original destination data.  (Incidentally, we know
268	   that we'll need at least one byte of that original dest word.) */
269
270	ldq_u	t0, 0(a0)	# e0    :
271
272	negq	t8, t6		# .. e1 : build bitmask of bytes <= zero
273	and	t6, t8, t12	# e0    :
274	and	a1, 7, t5	# .. e1 :
275	subq	t12, 1, t6	# e0    :
276	or	t6, t12, t8	# e1    :
277	srl	t12, t5, t12	# e0    : adjust final null return value
278
279	zapnot	t2, t8, t2	# .. e1 : prepare source word; mirror changes
280	and	t1, t2, t1	# e1    : to source validity mask
281	extql	t2, a1, t2	# .. e0 :
282	extql	t1, a1, t1	# e0    :
283
284	andnot	t0, t2, t0	# .. e1 : zero place for source to reside
285	or	t0, t1, t1	# e1    : and put it there
286	stq_u	t1, 0(a0)	# .. e0 :
287	ret	(t9)		# e1    :
288
289	.end __stxcpy
290