xref: /openbmc/linux/arch/alpha/kernel/time.c (revision 6735b463) 
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *  linux/arch/alpha/kernel/time.c
4  *
5  *  Copyright (C) 1991, 1992, 1995, 1999, 2000  Linus Torvalds
6  *
7  * This file contains the clocksource time handling.
8  * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
9  *		"A Kernel Model for Precision Timekeeping" by Dave Mills
10  * 1997-01-09    Adrian Sun
11  *      use interval timer if CONFIG_RTC=y
12  * 1997-10-29    John Bowman (bowman@math.ualberta.ca)
13  *      fixed tick loss calculation in timer_interrupt
14  *      (round system clock to nearest tick instead of truncating)
15  *      fixed algorithm in time_init for getting time from CMOS clock
16  * 1999-04-16	Thorsten Kranzkowski (dl8bcu@gmx.net)
17  *	fixed algorithm in do_gettimeofday() for calculating the precise time
18  *	from processor cycle counter (now taking lost_ticks into account)
19  * 2003-06-03	R. Scott Bailey <scott.bailey@eds.com>
20  *	Tighten sanity in time_init from 1% (10,000 PPM) to 250 PPM
21  */
22 #include <linux/errno.h>
23 #include <linux/module.h>
24 #include <linux/sched.h>
25 #include <linux/kernel.h>
26 #include <linux/param.h>
27 #include <linux/string.h>
28 #include <linux/mm.h>
29 #include <linux/delay.h>
30 #include <linux/ioport.h>
31 #include <linux/irq.h>
32 #include <linux/interrupt.h>
33 #include <linux/init.h>
34 #include <linux/bcd.h>
35 #include <linux/profile.h>
36 #include <linux/irq_work.h>
37 
38 #include <linux/uaccess.h>
39 #include <asm/io.h>
40 #include <asm/hwrpb.h>
41 
42 #include <linux/mc146818rtc.h>
43 #include <linux/time.h>
44 #include <linux/timex.h>
45 #include <linux/clocksource.h>
46 #include <linux/clockchips.h>
47 
48 #include "proto.h"
49 #include "irq_impl.h"
50 
51 DEFINE_SPINLOCK(rtc_lock);
52 EXPORT_SYMBOL(rtc_lock);
53 
54 unsigned long est_cycle_freq;
55 
56 #ifdef CONFIG_IRQ_WORK
57 
58 DEFINE_PER_CPU(u8, irq_work_pending);
59 
60 #define set_irq_work_pending_flag()  __this_cpu_write(irq_work_pending, 1)
61 #define test_irq_work_pending()      __this_cpu_read(irq_work_pending)
62 #define clear_irq_work_pending()     __this_cpu_write(irq_work_pending, 0)
63 
64 void arch_irq_work_raise(void)
65 {
66 	set_irq_work_pending_flag();
67 }
68 
69 #else  /* CONFIG_IRQ_WORK */
70 
71 #define test_irq_work_pending()      0
72 #define clear_irq_work_pending()
73 
74 #endif /* CONFIG_IRQ_WORK */
75 
76 
77 static inline __u32 rpcc(void)
78 {
79 	return __builtin_alpha_rpcc();
80 }
81 
82 
83 
84 /*
85  * The RTC as a clock_event_device primitive.
86  */
87 
88 static DEFINE_PER_CPU(struct clock_event_device, cpu_ce);
89 
90 irqreturn_t
91 rtc_timer_interrupt(int irq, void *dev)
92 {
93 	int cpu = smp_processor_id();
94 	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
95 
96 	/* Don't run the hook for UNUSED or SHUTDOWN.  */
97 	if (likely(clockevent_state_periodic(ce)))
98 		ce->event_handler(ce);
99 
100 	if (test_irq_work_pending()) {
101 		clear_irq_work_pending();
102 		irq_work_run();
103 	}
104 
105 	return IRQ_HANDLED;
106 }
107 
108 static int
109 rtc_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
110 {
111 	/* This hook is for oneshot mode, which we don't support.  */
112 	return -EINVAL;
113 }
114 
115 static void __init
116 init_rtc_clockevent(void)
117 {
118 	int cpu = smp_processor_id();
119 	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
120 
121 	*ce = (struct clock_event_device){
122 		.name = "rtc",
123 		.features = CLOCK_EVT_FEAT_PERIODIC,
124 		.rating = 100,
125 		.cpumask = cpumask_of(cpu),
126 		.set_next_event = rtc_ce_set_next_event,
127 	};
128 
129 	clockevents_config_and_register(ce, CONFIG_HZ, 0, 0);
130 }
131 
132 
133 /*
134  * The QEMU clock as a clocksource primitive.
135  */
136 
137 static u64
138 qemu_cs_read(struct clocksource *cs)
139 {
140 	return qemu_get_vmtime();
141 }
142 
143 static struct clocksource qemu_cs = {
144 	.name                   = "qemu",
145 	.rating                 = 400,
146 	.read                   = qemu_cs_read,
147 	.mask                   = CLOCKSOURCE_MASK(64),
148 	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS,
149 	.max_idle_ns		= LONG_MAX
150 };
151 
152 
153 /*
154  * The QEMU alarm as a clock_event_device primitive.
155  */
156 
157 static int qemu_ce_shutdown(struct clock_event_device *ce)
158 {
159 	/* The mode member of CE is updated for us in generic code.
160 	   Just make sure that the event is disabled.  */
161 	qemu_set_alarm_abs(0);
162 	return 0;
163 }
164 
165 static int
166 qemu_ce_set_next_event(unsigned long evt, struct clock_event_device *ce)
167 {
168 	qemu_set_alarm_rel(evt);
169 	return 0;
170 }
171 
172 static irqreturn_t
173 qemu_timer_interrupt(int irq, void *dev)
174 {
175 	int cpu = smp_processor_id();
176 	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
177 
178 	ce->event_handler(ce);
179 	return IRQ_HANDLED;
180 }
181 
182 static void __init
183 init_qemu_clockevent(void)
184 {
185 	int cpu = smp_processor_id();
186 	struct clock_event_device *ce = &per_cpu(cpu_ce, cpu);
187 
188 	*ce = (struct clock_event_device){
189 		.name = "qemu",
190 		.features = CLOCK_EVT_FEAT_ONESHOT,
191 		.rating = 400,
192 		.cpumask = cpumask_of(cpu),
193 		.set_state_shutdown = qemu_ce_shutdown,
194 		.set_state_oneshot = qemu_ce_shutdown,
195 		.tick_resume = qemu_ce_shutdown,
196 		.set_next_event = qemu_ce_set_next_event,
197 	};
198 
199 	clockevents_config_and_register(ce, NSEC_PER_SEC, 1000, LONG_MAX);
200 }
201 
202 
203 void __init
204 common_init_rtc(void)
205 {
206 	unsigned char x, sel = 0;
207 
208 	/* Reset periodic interrupt frequency.  */
209 #if CONFIG_HZ == 1024 || CONFIG_HZ == 1200
210  	x = CMOS_READ(RTC_FREQ_SELECT) & 0x3f;
211 	/* Test includes known working values on various platforms
212 	   where 0x26 is wrong; we refuse to change those. */
213  	if (x != 0x26 && x != 0x25 && x != 0x19 && x != 0x06) {
214 		sel = RTC_REF_CLCK_32KHZ + 6;
215 	}
216 #elif CONFIG_HZ == 256 || CONFIG_HZ == 128 || CONFIG_HZ == 64 || CONFIG_HZ == 32
217 	sel = RTC_REF_CLCK_32KHZ + __builtin_ffs(32768 / CONFIG_HZ);
218 #else
219 # error "Unknown HZ from arch/alpha/Kconfig"
220 #endif
221 	if (sel) {
222 		printk(KERN_INFO "Setting RTC_FREQ to %d Hz (%x)\n",
223 		       CONFIG_HZ, sel);
224 		CMOS_WRITE(sel, RTC_FREQ_SELECT);
225  	}
226 
227 	/* Turn on periodic interrupts.  */
228 	x = CMOS_READ(RTC_CONTROL);
229 	if (!(x & RTC_PIE)) {
230 		printk("Turning on RTC interrupts.\n");
231 		x |= RTC_PIE;
232 		x &= ~(RTC_AIE | RTC_UIE);
233 		CMOS_WRITE(x, RTC_CONTROL);
234 	}
235 	(void) CMOS_READ(RTC_INTR_FLAGS);
236 
237 	outb(0x36, 0x43);	/* pit counter 0: system timer */
238 	outb(0x00, 0x40);
239 	outb(0x00, 0x40);
240 
241 	outb(0xb6, 0x43);	/* pit counter 2: speaker */
242 	outb(0x31, 0x42);
243 	outb(0x13, 0x42);
244 
245 	init_rtc_irq(NULL);
246 }
247 
248 
249 #ifndef CONFIG_ALPHA_WTINT
250 /*
251  * The RPCC as a clocksource primitive.
252  *
253  * While we have free-running timecounters running on all CPUs, and we make
254  * a half-hearted attempt in init_rtc_rpcc_info to sync the timecounter
255  * with the wall clock, that initialization isn't kept up-to-date across
256  * different time counters in SMP mode.  Therefore we can only use this
257  * method when there's only one CPU enabled.
258  *
259  * When using the WTINT PALcall, the RPCC may shift to a lower frequency,
260  * or stop altogether, while waiting for the interrupt.  Therefore we cannot
261  * use this method when WTINT is in use.
262  */
263 
264 static u64 read_rpcc(struct clocksource *cs)
265 {
266 	return rpcc();
267 }
268 
269 static struct clocksource clocksource_rpcc = {
270 	.name                   = "rpcc",
271 	.rating                 = 300,
272 	.read                   = read_rpcc,
273 	.mask                   = CLOCKSOURCE_MASK(32),
274 	.flags                  = CLOCK_SOURCE_IS_CONTINUOUS
275 };
276 #endif /* ALPHA_WTINT */
277 
278 
279 /* Validate a computed cycle counter result against the known bounds for
280    the given processor core.  There's too much brokenness in the way of
281    timing hardware for any one method to work everywhere.  :-(
282 
283    Return 0 if the result cannot be trusted, otherwise return the argument.  */
284 
285 static unsigned long __init
286 validate_cc_value(unsigned long cc)
287 {
288 	static struct bounds {
289 		unsigned int min, max;
290 	} cpu_hz[] __initdata = {
291 		[EV3_CPU]    = {   50000000,  200000000 },	/* guess */
292 		[EV4_CPU]    = {  100000000,  300000000 },
293 		[LCA4_CPU]   = {  100000000,  300000000 },	/* guess */
294 		[EV45_CPU]   = {  200000000,  300000000 },
295 		[EV5_CPU]    = {  250000000,  433000000 },
296 		[EV56_CPU]   = {  333000000,  667000000 },
297 		[PCA56_CPU]  = {  400000000,  600000000 },	/* guess */
298 		[PCA57_CPU]  = {  500000000,  600000000 },	/* guess */
299 		[EV6_CPU]    = {  466000000,  600000000 },
300 		[EV67_CPU]   = {  600000000,  750000000 },
301 		[EV68AL_CPU] = {  750000000,  940000000 },
302 		[EV68CB_CPU] = { 1000000000, 1333333333 },
303 		/* None of the following are shipping as of 2001-11-01.  */
304 		[EV68CX_CPU] = { 1000000000, 1700000000 },	/* guess */
305 		[EV69_CPU]   = { 1000000000, 1700000000 },	/* guess */
306 		[EV7_CPU]    = {  800000000, 1400000000 },	/* guess */
307 		[EV79_CPU]   = { 1000000000, 2000000000 },	/* guess */
308 	};
309 
310 	/* Allow for some drift in the crystal.  10MHz is more than enough.  */
311 	const unsigned int deviation = 10000000;
312 
313 	struct percpu_struct *cpu;
314 	unsigned int index;
315 
316 	cpu = (struct percpu_struct *)((char*)hwrpb + hwrpb->processor_offset);
317 	index = cpu->type & 0xffffffff;
318 
319 	/* If index out of bounds, no way to validate.  */
320 	if (index >= ARRAY_SIZE(cpu_hz))
321 		return cc;
322 
323 	/* If index contains no data, no way to validate.  */
324 	if (cpu_hz[index].max == 0)
325 		return cc;
326 
327 	if (cc < cpu_hz[index].min - deviation
328 	    || cc > cpu_hz[index].max + deviation)
329 		return 0;
330 
331 	return cc;
332 }
333 
334 
335 /*
336  * Calibrate CPU clock using legacy 8254 timer/counter. Stolen from
337  * arch/i386/time.c.
338  */
339 
340 #define CALIBRATE_LATCH	0xffff
341 #define TIMEOUT_COUNT	0x100000
342 
343 static unsigned long __init
344 calibrate_cc_with_pit(void)
345 {
346 	int cc, count = 0;
347 
348 	/* Set the Gate high, disable speaker */
349 	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
350 
351 	/*
352 	 * Now let's take care of CTC channel 2
353 	 *
354 	 * Set the Gate high, program CTC channel 2 for mode 0,
355 	 * (interrupt on terminal count mode), binary count,
356 	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
357 	 */
358 	outb(0xb0, 0x43);		/* binary, mode 0, LSB/MSB, Ch 2 */
359 	outb(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
360 	outb(CALIBRATE_LATCH >> 8, 0x42);	/* MSB of count */
361 
362 	cc = rpcc();
363 	do {
364 		count++;
365 	} while ((inb(0x61) & 0x20) == 0 && count < TIMEOUT_COUNT);
366 	cc = rpcc() - cc;
367 
368 	/* Error: ECTCNEVERSET or ECPUTOOFAST.  */
369 	if (count <= 1 || count == TIMEOUT_COUNT)
370 		return 0;
371 
372 	return ((long)cc * PIT_TICK_RATE) / (CALIBRATE_LATCH + 1);
373 }
374 
375 /* The Linux interpretation of the CMOS clock register contents:
376    When the Update-In-Progress (UIP) flag goes from 1 to 0, the
377    RTC registers show the second which has precisely just started.
378    Let's hope other operating systems interpret the RTC the same way.  */
379 
380 static unsigned long __init
381 rpcc_after_update_in_progress(void)
382 {
383 	do { } while (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP));
384 	do { } while (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP);
385 
386 	return rpcc();
387 }
388 
389 void __init
390 time_init(void)
391 {
392 	unsigned int cc1, cc2;
393 	unsigned long cycle_freq, tolerance;
394 	long diff;
395 
396 	if (alpha_using_qemu) {
397 		clocksource_register_hz(&qemu_cs, NSEC_PER_SEC);
398 		init_qemu_clockevent();
399 		init_rtc_irq(qemu_timer_interrupt);
400 		return;
401 	}
402 
403 	/* Calibrate CPU clock -- attempt #1.  */
404 	if (!est_cycle_freq)
405 		est_cycle_freq = validate_cc_value(calibrate_cc_with_pit());
406 
407 	cc1 = rpcc();
408 
409 	/* Calibrate CPU clock -- attempt #2.  */
410 	if (!est_cycle_freq) {
411 		cc1 = rpcc_after_update_in_progress();
412 		cc2 = rpcc_after_update_in_progress();
413 		est_cycle_freq = validate_cc_value(cc2 - cc1);
414 		cc1 = cc2;
415 	}
416 
417 	cycle_freq = hwrpb->cycle_freq;
418 	if (est_cycle_freq) {
419 		/* If the given value is within 250 PPM of what we calculated,
420 		   accept it.  Otherwise, use what we found.  */
421 		tolerance = cycle_freq / 4000;
422 		diff = cycle_freq - est_cycle_freq;
423 		if (diff < 0)
424 			diff = -diff;
425 		if ((unsigned long)diff > tolerance) {
426 			cycle_freq = est_cycle_freq;
427 			printk("HWRPB cycle frequency bogus.  "
428 			       "Estimated %lu Hz\n", cycle_freq);
429 		} else {
430 			est_cycle_freq = 0;
431 		}
432 	} else if (! validate_cc_value (cycle_freq)) {
433 		printk("HWRPB cycle frequency bogus, "
434 		       "and unable to estimate a proper value!\n");
435 	}
436 
437 	/* See above for restrictions on using clocksource_rpcc.  */
438 #ifndef CONFIG_ALPHA_WTINT
439 	if (hwrpb->nr_processors == 1)
440 		clocksource_register_hz(&clocksource_rpcc, cycle_freq);
441 #endif
442 
443 	/* Startup the timer source. */
444 	alpha_mv.init_rtc();
445 	init_rtc_clockevent();
446 }
447 
448 /* Initialize the clock_event_device for secondary cpus.  */
449 #ifdef CONFIG_SMP
450 void __init
451 init_clockevent(void)
452 {
453 	if (alpha_using_qemu)
454 		init_qemu_clockevent();
455 	else
456 		init_rtc_clockevent();
457 }
458 #endif
459