1 /* 2 * linux/arch/alpha/kernel/sys_noritake.c 3 * 4 * Copyright (C) 1995 David A Rusling 5 * Copyright (C) 1996 Jay A Estabrook 6 * Copyright (C) 1998, 1999 Richard Henderson 7 * 8 * Code supporting the NORITAKE (AlphaServer 1000A), 9 * CORELLE (AlphaServer 800), and ALCOR Primo (AlphaStation 600A). 10 */ 11 12 #include <linux/kernel.h> 13 #include <linux/types.h> 14 #include <linux/mm.h> 15 #include <linux/sched.h> 16 #include <linux/pci.h> 17 #include <linux/init.h> 18 #include <linux/bitops.h> 19 20 #include <asm/ptrace.h> 21 #include <asm/mce.h> 22 #include <asm/dma.h> 23 #include <asm/irq.h> 24 #include <asm/mmu_context.h> 25 #include <asm/io.h> 26 #include <asm/pgtable.h> 27 #include <asm/core_apecs.h> 28 #include <asm/core_cia.h> 29 #include <asm/tlbflush.h> 30 31 #include "proto.h" 32 #include "irq_impl.h" 33 #include "pci_impl.h" 34 #include "machvec_impl.h" 35 36 /* Note mask bit is true for ENABLED irqs. */ 37 static int cached_irq_mask; 38 39 static inline void 40 noritake_update_irq_hw(int irq, int mask) 41 { 42 int port = 0x54a; 43 if (irq >= 32) { 44 mask >>= 16; 45 port = 0x54c; 46 } 47 outw(mask, port); 48 } 49 50 static void 51 noritake_enable_irq(struct irq_data *d) 52 { 53 noritake_update_irq_hw(d->irq, cached_irq_mask |= 1 << (d->irq - 16)); 54 } 55 56 static void 57 noritake_disable_irq(struct irq_data *d) 58 { 59 noritake_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << (d->irq - 16))); 60 } 61 62 static struct irq_chip noritake_irq_type = { 63 .name = "NORITAKE", 64 .irq_unmask = noritake_enable_irq, 65 .irq_mask = noritake_disable_irq, 66 .irq_mask_ack = noritake_disable_irq, 67 }; 68 69 static void 70 noritake_device_interrupt(unsigned long vector) 71 { 72 unsigned long pld; 73 unsigned int i; 74 75 /* Read the interrupt summary registers of NORITAKE */ 76 pld = (((unsigned long) inw(0x54c) << 32) 77 | ((unsigned long) inw(0x54a) << 16) 78 | ((unsigned long) inb(0xa0) << 8) 79 | inb(0x20)); 80 81 /* 82 * Now for every possible bit set, work through them and call 83 * the appropriate interrupt handler. 84 */ 85 while (pld) { 86 i = ffz(~pld); 87 pld &= pld - 1; /* clear least bit set */ 88 if (i < 16) { 89 isa_device_interrupt(vector); 90 } else { 91 handle_irq(i); 92 } 93 } 94 } 95 96 static void 97 noritake_srm_device_interrupt(unsigned long vector) 98 { 99 int irq; 100 101 irq = (vector - 0x800) >> 4; 102 103 /* 104 * I really hate to do this, too, but the NORITAKE SRM console also 105 * reports PCI vectors *lower* than I expected from the bit numbers 106 * in the documentation. 107 * But I really don't want to change the fixup code for allocation 108 * of IRQs, nor the alpha_irq_mask maintenance stuff, both of which 109 * look nice and clean now. 110 * So, here's this additional grotty hack... :-( 111 */ 112 if (irq >= 16) 113 irq = irq + 1; 114 115 handle_irq(irq); 116 } 117 118 static void __init 119 noritake_init_irq(void) 120 { 121 long i; 122 123 if (alpha_using_srm) 124 alpha_mv.device_interrupt = noritake_srm_device_interrupt; 125 126 outw(0, 0x54a); 127 outw(0, 0x54c); 128 129 for (i = 16; i < 48; ++i) { 130 irq_set_chip_and_handler(i, &noritake_irq_type, 131 handle_level_irq); 132 irq_set_status_flags(i, IRQ_LEVEL); 133 } 134 135 init_i8259a_irqs(); 136 common_init_isa_dma(); 137 } 138 139 140 /* 141 * PCI Fixup configuration. 142 * 143 * Summary @ 0x542, summary register #1: 144 * Bit Meaning 145 * 0 All valid ints from summary regs 2 & 3 146 * 1 QLOGIC ISP1020A SCSI 147 * 2 Interrupt Line A from slot 0 148 * 3 Interrupt Line B from slot 0 149 * 4 Interrupt Line A from slot 1 150 * 5 Interrupt line B from slot 1 151 * 6 Interrupt Line A from slot 2 152 * 7 Interrupt Line B from slot 2 153 * 8 Interrupt Line A from slot 3 154 * 9 Interrupt Line B from slot 3 155 *10 Interrupt Line A from slot 4 156 *11 Interrupt Line B from slot 4 157 *12 Interrupt Line A from slot 5 158 *13 Interrupt Line B from slot 5 159 *14 Interrupt Line A from slot 6 160 *15 Interrupt Line B from slot 6 161 * 162 * Summary @ 0x544, summary register #2: 163 * Bit Meaning 164 * 0 OR of all unmasked ints in SR #2 165 * 1 OR of secondary bus ints 166 * 2 Interrupt Line C from slot 0 167 * 3 Interrupt Line D from slot 0 168 * 4 Interrupt Line C from slot 1 169 * 5 Interrupt line D from slot 1 170 * 6 Interrupt Line C from slot 2 171 * 7 Interrupt Line D from slot 2 172 * 8 Interrupt Line C from slot 3 173 * 9 Interrupt Line D from slot 3 174 *10 Interrupt Line C from slot 4 175 *11 Interrupt Line D from slot 4 176 *12 Interrupt Line C from slot 5 177 *13 Interrupt Line D from slot 5 178 *14 Interrupt Line C from slot 6 179 *15 Interrupt Line D from slot 6 180 * 181 * The device to slot mapping looks like: 182 * 183 * Slot Device 184 * 7 Intel PCI-EISA bridge chip 185 * 8 DEC PCI-PCI bridge chip 186 * 11 PCI on board slot 0 187 * 12 PCI on board slot 1 188 * 13 PCI on board slot 2 189 * 190 * 191 * This two layered interrupt approach means that we allocate IRQ 16 and 192 * above for PCI interrupts. The IRQ relates to which bit the interrupt 193 * comes in on. This makes interrupt processing much easier. 194 */ 195 196 static int __init 197 noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 198 { 199 static char irq_tab[15][5] __initdata = { 200 /*INT INTA INTB INTC INTD */ 201 /* note: IDSELs 16, 17, and 25 are CORELLE only */ 202 { 16+1, 16+1, 16+1, 16+1, 16+1}, /* IdSel 16, QLOGIC */ 203 { -1, -1, -1, -1, -1}, /* IdSel 17, S3 Trio64 */ 204 { -1, -1, -1, -1, -1}, /* IdSel 18, PCEB */ 205 { -1, -1, -1, -1, -1}, /* IdSel 19, PPB */ 206 { -1, -1, -1, -1, -1}, /* IdSel 20, ???? */ 207 { -1, -1, -1, -1, -1}, /* IdSel 21, ???? */ 208 { 16+2, 16+2, 16+3, 32+2, 32+3}, /* IdSel 22, slot 0 */ 209 { 16+4, 16+4, 16+5, 32+4, 32+5}, /* IdSel 23, slot 1 */ 210 { 16+6, 16+6, 16+7, 32+6, 32+7}, /* IdSel 24, slot 2 */ 211 { 16+8, 16+8, 16+9, 32+8, 32+9}, /* IdSel 25, slot 3 */ 212 /* The following 5 are actually on PCI bus 1, which is 213 across the built-in bridge of the NORITAKE only. */ 214 { 16+1, 16+1, 16+1, 16+1, 16+1}, /* IdSel 16, QLOGIC */ 215 { 16+8, 16+8, 16+9, 32+8, 32+9}, /* IdSel 17, slot 3 */ 216 {16+10, 16+10, 16+11, 32+10, 32+11}, /* IdSel 18, slot 4 */ 217 {16+12, 16+12, 16+13, 32+12, 32+13}, /* IdSel 19, slot 5 */ 218 {16+14, 16+14, 16+15, 32+14, 32+15}, /* IdSel 20, slot 6 */ 219 }; 220 const long min_idsel = 5, max_idsel = 19, irqs_per_slot = 5; 221 return COMMON_TABLE_LOOKUP; 222 } 223 224 static u8 __init 225 noritake_swizzle(struct pci_dev *dev, u8 *pinp) 226 { 227 int slot, pin = *pinp; 228 229 if (dev->bus->number == 0) { 230 slot = PCI_SLOT(dev->devfn); 231 } 232 /* Check for the built-in bridge */ 233 else if (PCI_SLOT(dev->bus->self->devfn) == 8) { 234 slot = PCI_SLOT(dev->devfn) + 15; /* WAG! */ 235 } 236 else 237 { 238 /* Must be a card-based bridge. */ 239 do { 240 if (PCI_SLOT(dev->bus->self->devfn) == 8) { 241 slot = PCI_SLOT(dev->devfn) + 15; 242 break; 243 } 244 pin = pci_swizzle_interrupt_pin(dev, pin); 245 246 /* Move up the chain of bridges. */ 247 dev = dev->bus->self; 248 /* Slot of the next bridge. */ 249 slot = PCI_SLOT(dev->devfn); 250 } while (dev->bus->self); 251 } 252 *pinp = pin; 253 return slot; 254 } 255 256 #if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO) 257 static void 258 noritake_apecs_machine_check(unsigned long vector, unsigned long la_ptr) 259 { 260 #define MCHK_NO_DEVSEL 0x205U 261 #define MCHK_NO_TABT 0x204U 262 263 struct el_common *mchk_header; 264 unsigned int code; 265 266 mchk_header = (struct el_common *)la_ptr; 267 268 /* Clear the error before any reporting. */ 269 mb(); 270 mb(); /* magic */ 271 draina(); 272 apecs_pci_clr_err(); 273 wrmces(0x7); 274 mb(); 275 276 code = mchk_header->code; 277 process_mcheck_info(vector, la_ptr, "NORITAKE APECS", 278 (mcheck_expected(0) 279 && (code == MCHK_NO_DEVSEL 280 || code == MCHK_NO_TABT))); 281 } 282 #endif 283 284 285 /* 286 * The System Vectors 287 */ 288 289 #if defined(CONFIG_ALPHA_GENERIC) || !defined(CONFIG_ALPHA_PRIMO) 290 struct alpha_machine_vector noritake_mv __initmv = { 291 .vector_name = "Noritake", 292 DO_EV4_MMU, 293 DO_DEFAULT_RTC, 294 DO_APECS_IO, 295 .machine_check = noritake_apecs_machine_check, 296 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 297 .min_io_address = EISA_DEFAULT_IO_BASE, 298 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, 299 300 .nr_irqs = 48, 301 .device_interrupt = noritake_device_interrupt, 302 303 .init_arch = apecs_init_arch, 304 .init_irq = noritake_init_irq, 305 .init_rtc = common_init_rtc, 306 .init_pci = common_init_pci, 307 .pci_map_irq = noritake_map_irq, 308 .pci_swizzle = noritake_swizzle, 309 }; 310 ALIAS_MV(noritake) 311 #endif 312 313 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PRIMO) 314 struct alpha_machine_vector noritake_primo_mv __initmv = { 315 .vector_name = "Noritake-Primo", 316 DO_EV5_MMU, 317 DO_DEFAULT_RTC, 318 DO_CIA_IO, 319 .machine_check = cia_machine_check, 320 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 321 .min_io_address = EISA_DEFAULT_IO_BASE, 322 .min_mem_address = CIA_DEFAULT_MEM_BASE, 323 324 .nr_irqs = 48, 325 .device_interrupt = noritake_device_interrupt, 326 327 .init_arch = cia_init_arch, 328 .init_irq = noritake_init_irq, 329 .init_rtc = common_init_rtc, 330 .init_pci = cia_init_pci, 331 .kill_arch = cia_kill_arch, 332 .pci_map_irq = noritake_map_irq, 333 .pci_swizzle = noritake_swizzle, 334 }; 335 ALIAS_MV(noritake_primo) 336 #endif 337