1 /* 2 * linux/arch/alpha/kernel/sys_nautilus.c 3 * 4 * Copyright (C) 1995 David A Rusling 5 * Copyright (C) 1998 Richard Henderson 6 * Copyright (C) 1999 Alpha Processor, Inc., 7 * (David Daniel, Stig Telfer, Soohoon Lee) 8 * 9 * Code supporting NAUTILUS systems. 10 * 11 * 12 * NAUTILUS has the following I/O features: 13 * 14 * a) Driven by AMD 751 aka IRONGATE (northbridge): 15 * 4 PCI slots 16 * 1 AGP slot 17 * 18 * b) Driven by ALI M1543C (southbridge) 19 * 2 ISA slots 20 * 2 IDE connectors 21 * 1 dual drive capable FDD controller 22 * 2 serial ports 23 * 1 ECP/EPP/SP parallel port 24 * 2 USB ports 25 */ 26 27 #include <linux/kernel.h> 28 #include <linux/types.h> 29 #include <linux/mm.h> 30 #include <linux/sched.h> 31 #include <linux/pci.h> 32 #include <linux/init.h> 33 #include <linux/reboot.h> 34 #include <linux/bootmem.h> 35 #include <linux/bitops.h> 36 37 #include <asm/ptrace.h> 38 #include <asm/dma.h> 39 #include <asm/irq.h> 40 #include <asm/mmu_context.h> 41 #include <asm/io.h> 42 #include <asm/pgtable.h> 43 #include <asm/core_irongate.h> 44 #include <asm/hwrpb.h> 45 #include <asm/tlbflush.h> 46 47 #include "proto.h" 48 #include "err_impl.h" 49 #include "irq_impl.h" 50 #include "pci_impl.h" 51 #include "machvec_impl.h" 52 53 54 static void __init 55 nautilus_init_irq(void) 56 { 57 if (alpha_using_srm) { 58 alpha_mv.device_interrupt = srm_device_interrupt; 59 } 60 61 init_i8259a_irqs(); 62 common_init_isa_dma(); 63 } 64 65 static int __init 66 nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 67 { 68 /* Preserve the IRQ set up by the console. */ 69 70 u8 irq; 71 /* UP1500: AGP INTA is actually routed to IRQ 5, not IRQ 10 as 72 console reports. Check the device id of AGP bridge to distinguish 73 UP1500 from UP1000/1100. Note: 'pin' is 2 due to bridge swizzle. */ 74 if (slot == 1 && pin == 2 && 75 dev->bus->self && dev->bus->self->device == 0x700f) 76 return 5; 77 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); 78 return irq; 79 } 80 81 void 82 nautilus_kill_arch(int mode) 83 { 84 struct pci_bus *bus = pci_isa_hose->bus; 85 u32 pmuport; 86 int off; 87 88 switch (mode) { 89 case LINUX_REBOOT_CMD_RESTART: 90 if (! alpha_using_srm) { 91 u8 t8; 92 pci_bus_read_config_byte(bus, 0x38, 0x43, &t8); 93 pci_bus_write_config_byte(bus, 0x38, 0x43, t8 | 0x80); 94 outb(1, 0x92); 95 outb(0, 0x92); 96 /* NOTREACHED */ 97 } 98 break; 99 100 case LINUX_REBOOT_CMD_POWER_OFF: 101 /* Assume M1543C */ 102 off = 0x2000; /* SLP_TYPE = 0, SLP_EN = 1 */ 103 pci_bus_read_config_dword(bus, 0x88, 0x10, &pmuport); 104 if (!pmuport) { 105 /* M1535D/D+ */ 106 off = 0x3400; /* SLP_TYPE = 5, SLP_EN = 1 */ 107 pci_bus_read_config_dword(bus, 0x88, 0xe0, &pmuport); 108 } 109 pmuport &= 0xfffe; 110 outw(0xffff, pmuport); /* Clear pending events. */ 111 outw(off, pmuport + 4); 112 /* NOTREACHED */ 113 break; 114 } 115 } 116 117 /* Perform analysis of a machine check that arrived from the system (NMI) */ 118 119 static void 120 naut_sys_machine_check(unsigned long vector, unsigned long la_ptr, 121 struct pt_regs *regs) 122 { 123 printk("PC %lx RA %lx\n", regs->pc, regs->r26); 124 irongate_pci_clr_err(); 125 } 126 127 /* Machine checks can come from two sources - those on the CPU and those 128 in the system. They are analysed separately but all starts here. */ 129 130 void 131 nautilus_machine_check(unsigned long vector, unsigned long la_ptr) 132 { 133 char *mchk_class; 134 135 /* Now for some analysis. Machine checks fall into two classes -- 136 those picked up by the system, and those picked up by the CPU. 137 Add to that the two levels of severity - correctable or not. */ 138 139 if (vector == SCB_Q_SYSMCHK 140 && ((IRONGATE0->dramms & 0x300) == 0x300)) { 141 unsigned long nmi_ctl; 142 143 /* Clear ALI NMI */ 144 nmi_ctl = inb(0x61); 145 nmi_ctl |= 0x0c; 146 outb(nmi_ctl, 0x61); 147 nmi_ctl &= ~0x0c; 148 outb(nmi_ctl, 0x61); 149 150 /* Write again clears error bits. */ 151 IRONGATE0->stat_cmd = IRONGATE0->stat_cmd & ~0x100; 152 mb(); 153 IRONGATE0->stat_cmd; 154 155 /* Write again clears error bits. */ 156 IRONGATE0->dramms = IRONGATE0->dramms; 157 mb(); 158 IRONGATE0->dramms; 159 160 draina(); 161 wrmces(0x7); 162 mb(); 163 return; 164 } 165 166 if (vector == SCB_Q_SYSERR) 167 mchk_class = "Correctable"; 168 else if (vector == SCB_Q_SYSMCHK) 169 mchk_class = "Fatal"; 170 else { 171 ev6_machine_check(vector, la_ptr); 172 return; 173 } 174 175 printk(KERN_CRIT "NAUTILUS Machine check 0x%lx " 176 "[%s System Machine Check (NMI)]\n", 177 vector, mchk_class); 178 179 naut_sys_machine_check(vector, la_ptr, get_irq_regs()); 180 181 /* Tell the PALcode to clear the machine check */ 182 draina(); 183 wrmces(0x7); 184 mb(); 185 } 186 187 extern void pcibios_claim_one_bus(struct pci_bus *); 188 189 static struct resource irongate_io = { 190 .name = "Irongate PCI IO", 191 .flags = IORESOURCE_IO, 192 }; 193 static struct resource irongate_mem = { 194 .name = "Irongate PCI MEM", 195 .flags = IORESOURCE_MEM, 196 }; 197 198 void __init 199 nautilus_init_pci(void) 200 { 201 struct pci_controller *hose = hose_head; 202 struct pci_bus *bus; 203 struct pci_dev *irongate; 204 unsigned long bus_align, bus_size, pci_mem; 205 unsigned long memtop = max_low_pfn << PAGE_SHIFT; 206 207 /* Scan our single hose. */ 208 bus = pci_scan_bus(0, alpha_mv.pci_ops, hose); 209 if (!bus) 210 return; 211 212 hose->bus = bus; 213 pcibios_claim_one_bus(bus); 214 215 irongate = pci_get_bus_and_slot(0, 0); 216 bus->self = irongate; 217 bus->resource[0] = &irongate_io; 218 bus->resource[1] = &irongate_mem; 219 220 pci_bus_size_bridges(bus); 221 222 /* IO port range. */ 223 bus->resource[0]->start = 0; 224 bus->resource[0]->end = 0xffff; 225 226 /* Set up PCI memory range - limit is hardwired to 0xffffffff, 227 base must be at aligned to 16Mb. */ 228 bus_align = bus->resource[1]->start; 229 bus_size = bus->resource[1]->end + 1 - bus_align; 230 if (bus_align < 0x1000000UL) 231 bus_align = 0x1000000UL; 232 233 pci_mem = (0x100000000UL - bus_size) & -bus_align; 234 235 bus->resource[1]->start = pci_mem; 236 bus->resource[1]->end = 0xffffffffUL; 237 if (request_resource(&iomem_resource, bus->resource[1]) < 0) 238 printk(KERN_ERR "Failed to request MEM on hose 0\n"); 239 240 if (pci_mem < memtop) 241 memtop = pci_mem; 242 if (memtop > alpha_mv.min_mem_address) { 243 free_reserved_area(__va(alpha_mv.min_mem_address), 244 __va(memtop), -1, NULL); 245 printk("nautilus_init_pci: %ldk freed\n", 246 (memtop - alpha_mv.min_mem_address) >> 10); 247 } 248 249 if ((IRONGATE0->dev_vendor >> 16) > 0x7006) /* Albacore? */ 250 IRONGATE0->pci_mem = pci_mem; 251 252 pci_bus_assign_resources(bus); 253 254 /* pci_common_swizzle() relies on bus->self being NULL 255 for the root bus, so just clear it. */ 256 bus->self = NULL; 257 pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq); 258 pci_bus_add_devices(bus); 259 } 260 261 /* 262 * The System Vectors 263 */ 264 265 struct alpha_machine_vector nautilus_mv __initmv = { 266 .vector_name = "Nautilus", 267 DO_EV6_MMU, 268 DO_DEFAULT_RTC, 269 DO_IRONGATE_IO, 270 .machine_check = nautilus_machine_check, 271 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 272 .min_io_address = DEFAULT_IO_BASE, 273 .min_mem_address = IRONGATE_DEFAULT_MEM_BASE, 274 275 .nr_irqs = 16, 276 .device_interrupt = isa_device_interrupt, 277 278 .init_arch = irongate_init_arch, 279 .init_irq = nautilus_init_irq, 280 .init_rtc = common_init_rtc, 281 .init_pci = nautilus_init_pci, 282 .kill_arch = nautilus_kill_arch, 283 .pci_map_irq = nautilus_map_irq, 284 .pci_swizzle = common_swizzle, 285 }; 286 ALIAS_MV(nautilus) 287