1 /* 2 * linux/arch/alpha/kernel/sys_alcor.c 3 * 4 * Copyright (C) 1995 David A Rusling 5 * Copyright (C) 1996 Jay A Estabrook 6 * Copyright (C) 1998, 1999 Richard Henderson 7 * 8 * Code supporting the ALCOR and XLT (XL-300/366/433). 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/types.h> 13 #include <linux/mm.h> 14 #include <linux/sched.h> 15 #include <linux/pci.h> 16 #include <linux/init.h> 17 #include <linux/reboot.h> 18 #include <linux/bitops.h> 19 20 #include <asm/ptrace.h> 21 #include <asm/io.h> 22 #include <asm/dma.h> 23 #include <asm/mmu_context.h> 24 #include <asm/irq.h> 25 #include <asm/pgtable.h> 26 #include <asm/core_cia.h> 27 #include <asm/tlbflush.h> 28 29 #include "proto.h" 30 #include "irq_impl.h" 31 #include "pci_impl.h" 32 #include "machvec_impl.h" 33 34 35 /* Note mask bit is true for ENABLED irqs. */ 36 static unsigned long cached_irq_mask; 37 38 static inline void 39 alcor_update_irq_hw(unsigned long mask) 40 { 41 *(vuip)GRU_INT_MASK = mask; 42 mb(); 43 } 44 45 static inline void 46 alcor_enable_irq(struct irq_data *d) 47 { 48 alcor_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16)); 49 } 50 51 static void 52 alcor_disable_irq(struct irq_data *d) 53 { 54 alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16))); 55 } 56 57 static void 58 alcor_mask_and_ack_irq(struct irq_data *d) 59 { 60 alcor_disable_irq(d); 61 62 /* On ALCOR/XLT, need to dismiss interrupt via GRU. */ 63 *(vuip)GRU_INT_CLEAR = 1 << (d->irq - 16); mb(); 64 *(vuip)GRU_INT_CLEAR = 0; mb(); 65 } 66 67 static void 68 alcor_isa_mask_and_ack_irq(struct irq_data *d) 69 { 70 i8259a_mask_and_ack_irq(d); 71 72 /* On ALCOR/XLT, need to dismiss interrupt via GRU. */ 73 *(vuip)GRU_INT_CLEAR = 0x80000000; mb(); 74 *(vuip)GRU_INT_CLEAR = 0; mb(); 75 } 76 77 static struct irq_chip alcor_irq_type = { 78 .name = "ALCOR", 79 .irq_unmask = alcor_enable_irq, 80 .irq_mask = alcor_disable_irq, 81 .irq_mask_ack = alcor_mask_and_ack_irq, 82 }; 83 84 static void 85 alcor_device_interrupt(unsigned long vector) 86 { 87 unsigned long pld; 88 unsigned int i; 89 90 /* Read the interrupt summary register of the GRU */ 91 pld = (*(vuip)GRU_INT_REQ) & GRU_INT_REQ_BITS; 92 93 /* 94 * Now for every possible bit set, work through them and call 95 * the appropriate interrupt handler. 96 */ 97 while (pld) { 98 i = ffz(~pld); 99 pld &= pld - 1; /* clear least bit set */ 100 if (i == 31) { 101 isa_device_interrupt(vector); 102 } else { 103 handle_irq(16 + i); 104 } 105 } 106 } 107 108 static void __init 109 alcor_init_irq(void) 110 { 111 long i; 112 113 if (alpha_using_srm) 114 alpha_mv.device_interrupt = srm_device_interrupt; 115 116 *(vuip)GRU_INT_MASK = 0; mb(); /* all disabled */ 117 *(vuip)GRU_INT_EDGE = 0; mb(); /* all are level */ 118 *(vuip)GRU_INT_HILO = 0x80000000U; mb(); /* ISA only HI */ 119 *(vuip)GRU_INT_CLEAR = 0; mb(); /* all clear */ 120 121 for (i = 16; i < 48; ++i) { 122 /* On Alcor, at least, lines 20..30 are not connected 123 and can generate spurious interrupts if we turn them 124 on while IRQ probing. */ 125 if (i >= 16+20 && i <= 16+30) 126 continue; 127 irq_set_chip_and_handler(i, &alcor_irq_type, handle_level_irq); 128 irq_set_status_flags(i, IRQ_LEVEL); 129 } 130 i8259a_irq_type.irq_ack = alcor_isa_mask_and_ack_irq; 131 132 init_i8259a_irqs(); 133 common_init_isa_dma(); 134 135 setup_irq(16+31, &isa_cascade_irqaction); 136 } 137 138 139 /* 140 * PCI Fixup configuration. 141 * 142 * Summary @ GRU_INT_REQ: 143 * Bit Meaning 144 * 0 Interrupt Line A from slot 2 145 * 1 Interrupt Line B from slot 2 146 * 2 Interrupt Line C from slot 2 147 * 3 Interrupt Line D from slot 2 148 * 4 Interrupt Line A from slot 1 149 * 5 Interrupt line B from slot 1 150 * 6 Interrupt Line C from slot 1 151 * 7 Interrupt Line D from slot 1 152 * 8 Interrupt Line A from slot 0 153 * 9 Interrupt Line B from slot 0 154 *10 Interrupt Line C from slot 0 155 *11 Interrupt Line D from slot 0 156 *12 Interrupt Line A from slot 4 157 *13 Interrupt Line B from slot 4 158 *14 Interrupt Line C from slot 4 159 *15 Interrupt Line D from slot 4 160 *16 Interrupt Line D from slot 3 161 *17 Interrupt Line D from slot 3 162 *18 Interrupt Line D from slot 3 163 *19 Interrupt Line D from slot 3 164 *20-30 Reserved 165 *31 EISA interrupt 166 * 167 * The device to slot mapping looks like: 168 * 169 * Slot Device 170 * 6 built-in TULIP (XLT only) 171 * 7 PCI on board slot 0 172 * 8 PCI on board slot 3 173 * 9 PCI on board slot 4 174 * 10 PCEB (PCI-EISA bridge) 175 * 11 PCI on board slot 2 176 * 12 PCI on board slot 1 177 * 178 * 179 * This two layered interrupt approach means that we allocate IRQ 16 and 180 * above for PCI interrupts. The IRQ relates to which bit the interrupt 181 * comes in on. This makes interrupt processing much easier. 182 */ 183 184 static int __init 185 alcor_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 186 { 187 static char irq_tab[7][5] __initdata = { 188 /*INT INTA INTB INTC INTD */ 189 /* note: IDSEL 17 is XLT only */ 190 {16+13, 16+13, 16+13, 16+13, 16+13}, /* IdSel 17, TULIP */ 191 { 16+8, 16+8, 16+9, 16+10, 16+11}, /* IdSel 18, slot 0 */ 192 {16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 19, slot 3 */ 193 {16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 20, slot 4 */ 194 { -1, -1, -1, -1, -1}, /* IdSel 21, PCEB */ 195 { 16+0, 16+0, 16+1, 16+2, 16+3}, /* IdSel 22, slot 2 */ 196 { 16+4, 16+4, 16+5, 16+6, 16+7}, /* IdSel 23, slot 1 */ 197 }; 198 const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5; 199 return COMMON_TABLE_LOOKUP; 200 } 201 202 static void 203 alcor_kill_arch(int mode) 204 { 205 cia_kill_arch(mode); 206 207 #ifndef ALPHA_RESTORE_SRM_SETUP 208 switch(mode) { 209 case LINUX_REBOOT_CMD_RESTART: 210 /* Who said DEC engineer's have no sense of humor? ;-) */ 211 if (alpha_using_srm) { 212 *(vuip) GRU_RESET = 0x0000dead; 213 mb(); 214 } 215 break; 216 case LINUX_REBOOT_CMD_HALT: 217 break; 218 case LINUX_REBOOT_CMD_POWER_OFF: 219 break; 220 } 221 222 halt(); 223 #endif 224 } 225 226 static void __init 227 alcor_init_pci(void) 228 { 229 struct pci_dev *dev; 230 231 cia_init_pci(); 232 233 /* 234 * Now we can look to see if we are really running on an XLT-type 235 * motherboard, by looking for a 21040 TULIP in slot 6, which is 236 * built into XLT and BRET/MAVERICK, but not available on ALCOR. 237 */ 238 dev = pci_get_device(PCI_VENDOR_ID_DEC, 239 PCI_DEVICE_ID_DEC_TULIP, 240 NULL); 241 if (dev && dev->devfn == PCI_DEVFN(6,0)) { 242 alpha_mv.sys.cia.gru_int_req_bits = XLT_GRU_INT_REQ_BITS; 243 printk(KERN_INFO "%s: Detected AS500 or XLT motherboard.\n", 244 __func__); 245 } 246 pci_dev_put(dev); 247 } 248 249 250 /* 251 * The System Vectors 252 */ 253 254 struct alpha_machine_vector alcor_mv __initmv = { 255 .vector_name = "Alcor", 256 DO_EV5_MMU, 257 DO_DEFAULT_RTC, 258 DO_CIA_IO, 259 .machine_check = cia_machine_check, 260 .max_isa_dma_address = ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS, 261 .min_io_address = EISA_DEFAULT_IO_BASE, 262 .min_mem_address = CIA_DEFAULT_MEM_BASE, 263 264 .nr_irqs = 48, 265 .device_interrupt = alcor_device_interrupt, 266 267 .init_arch = cia_init_arch, 268 .init_irq = alcor_init_irq, 269 .init_rtc = common_init_rtc, 270 .init_pci = alcor_init_pci, 271 .kill_arch = alcor_kill_arch, 272 .pci_map_irq = alcor_map_irq, 273 .pci_swizzle = common_swizzle, 274 275 .sys = { .cia = { 276 .gru_int_req_bits = ALCOR_GRU_INT_REQ_BITS 277 }} 278 }; 279 ALIAS_MV(alcor) 280 281 struct alpha_machine_vector xlt_mv __initmv = { 282 .vector_name = "XLT", 283 DO_EV5_MMU, 284 DO_DEFAULT_RTC, 285 DO_CIA_IO, 286 .machine_check = cia_machine_check, 287 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 288 .min_io_address = EISA_DEFAULT_IO_BASE, 289 .min_mem_address = CIA_DEFAULT_MEM_BASE, 290 291 .nr_irqs = 48, 292 .device_interrupt = alcor_device_interrupt, 293 294 .init_arch = cia_init_arch, 295 .init_irq = alcor_init_irq, 296 .init_rtc = common_init_rtc, 297 .init_pci = alcor_init_pci, 298 .kill_arch = alcor_kill_arch, 299 .pci_map_irq = alcor_map_irq, 300 .pci_swizzle = common_swizzle, 301 302 .sys = { .cia = { 303 .gru_int_req_bits = XLT_GRU_INT_REQ_BITS 304 }} 305 }; 306 307 /* No alpha_mv alias for XLT, since we compile it in unconditionally 308 with ALCOR; setup_arch knows how to cope. */ 309