1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * linux/arch/alpha/kernel/sys_alcor.c 4 * 5 * Copyright (C) 1995 David A Rusling 6 * Copyright (C) 1996 Jay A Estabrook 7 * Copyright (C) 1998, 1999 Richard Henderson 8 * 9 * Code supporting the ALCOR and XLT (XL-300/366/433). 10 */ 11 12 #include <linux/kernel.h> 13 #include <linux/types.h> 14 #include <linux/mm.h> 15 #include <linux/sched.h> 16 #include <linux/pci.h> 17 #include <linux/init.h> 18 #include <linux/reboot.h> 19 #include <linux/bitops.h> 20 21 #include <asm/ptrace.h> 22 #include <asm/io.h> 23 #include <asm/dma.h> 24 #include <asm/mmu_context.h> 25 #include <asm/irq.h> 26 #include <asm/pgtable.h> 27 #include <asm/core_cia.h> 28 #include <asm/tlbflush.h> 29 30 #include "proto.h" 31 #include "irq_impl.h" 32 #include "pci_impl.h" 33 #include "machvec_impl.h" 34 35 36 /* Note mask bit is true for ENABLED irqs. */ 37 static unsigned long cached_irq_mask; 38 39 static inline void 40 alcor_update_irq_hw(unsigned long mask) 41 { 42 *(vuip)GRU_INT_MASK = mask; 43 mb(); 44 } 45 46 static inline void 47 alcor_enable_irq(struct irq_data *d) 48 { 49 alcor_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16)); 50 } 51 52 static void 53 alcor_disable_irq(struct irq_data *d) 54 { 55 alcor_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16))); 56 } 57 58 static void 59 alcor_mask_and_ack_irq(struct irq_data *d) 60 { 61 alcor_disable_irq(d); 62 63 /* On ALCOR/XLT, need to dismiss interrupt via GRU. */ 64 *(vuip)GRU_INT_CLEAR = 1 << (d->irq - 16); mb(); 65 *(vuip)GRU_INT_CLEAR = 0; mb(); 66 } 67 68 static void 69 alcor_isa_mask_and_ack_irq(struct irq_data *d) 70 { 71 i8259a_mask_and_ack_irq(d); 72 73 /* On ALCOR/XLT, need to dismiss interrupt via GRU. */ 74 *(vuip)GRU_INT_CLEAR = 0x80000000; mb(); 75 *(vuip)GRU_INT_CLEAR = 0; mb(); 76 } 77 78 static struct irq_chip alcor_irq_type = { 79 .name = "ALCOR", 80 .irq_unmask = alcor_enable_irq, 81 .irq_mask = alcor_disable_irq, 82 .irq_mask_ack = alcor_mask_and_ack_irq, 83 }; 84 85 static void 86 alcor_device_interrupt(unsigned long vector) 87 { 88 unsigned long pld; 89 unsigned int i; 90 91 /* Read the interrupt summary register of the GRU */ 92 pld = (*(vuip)GRU_INT_REQ) & GRU_INT_REQ_BITS; 93 94 /* 95 * Now for every possible bit set, work through them and call 96 * the appropriate interrupt handler. 97 */ 98 while (pld) { 99 i = ffz(~pld); 100 pld &= pld - 1; /* clear least bit set */ 101 if (i == 31) { 102 isa_device_interrupt(vector); 103 } else { 104 handle_irq(16 + i); 105 } 106 } 107 } 108 109 static void __init 110 alcor_init_irq(void) 111 { 112 long i; 113 114 if (alpha_using_srm) 115 alpha_mv.device_interrupt = srm_device_interrupt; 116 117 *(vuip)GRU_INT_MASK = 0; mb(); /* all disabled */ 118 *(vuip)GRU_INT_EDGE = 0; mb(); /* all are level */ 119 *(vuip)GRU_INT_HILO = 0x80000000U; mb(); /* ISA only HI */ 120 *(vuip)GRU_INT_CLEAR = 0; mb(); /* all clear */ 121 122 for (i = 16; i < 48; ++i) { 123 /* On Alcor, at least, lines 20..30 are not connected 124 and can generate spurious interrupts if we turn them 125 on while IRQ probing. */ 126 if (i >= 16+20 && i <= 16+30) 127 continue; 128 irq_set_chip_and_handler(i, &alcor_irq_type, handle_level_irq); 129 irq_set_status_flags(i, IRQ_LEVEL); 130 } 131 i8259a_irq_type.irq_ack = alcor_isa_mask_and_ack_irq; 132 133 init_i8259a_irqs(); 134 common_init_isa_dma(); 135 136 setup_irq(16+31, &isa_cascade_irqaction); 137 } 138 139 140 /* 141 * PCI Fixup configuration. 142 * 143 * Summary @ GRU_INT_REQ: 144 * Bit Meaning 145 * 0 Interrupt Line A from slot 2 146 * 1 Interrupt Line B from slot 2 147 * 2 Interrupt Line C from slot 2 148 * 3 Interrupt Line D from slot 2 149 * 4 Interrupt Line A from slot 1 150 * 5 Interrupt line B from slot 1 151 * 6 Interrupt Line C from slot 1 152 * 7 Interrupt Line D from slot 1 153 * 8 Interrupt Line A from slot 0 154 * 9 Interrupt Line B from slot 0 155 *10 Interrupt Line C from slot 0 156 *11 Interrupt Line D from slot 0 157 *12 Interrupt Line A from slot 4 158 *13 Interrupt Line B from slot 4 159 *14 Interrupt Line C from slot 4 160 *15 Interrupt Line D from slot 4 161 *16 Interrupt Line D from slot 3 162 *17 Interrupt Line D from slot 3 163 *18 Interrupt Line D from slot 3 164 *19 Interrupt Line D from slot 3 165 *20-30 Reserved 166 *31 EISA interrupt 167 * 168 * The device to slot mapping looks like: 169 * 170 * Slot Device 171 * 6 built-in TULIP (XLT only) 172 * 7 PCI on board slot 0 173 * 8 PCI on board slot 3 174 * 9 PCI on board slot 4 175 * 10 PCEB (PCI-EISA bridge) 176 * 11 PCI on board slot 2 177 * 12 PCI on board slot 1 178 * 179 * 180 * This two layered interrupt approach means that we allocate IRQ 16 and 181 * above for PCI interrupts. The IRQ relates to which bit the interrupt 182 * comes in on. This makes interrupt processing much easier. 183 */ 184 185 static int 186 alcor_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 187 { 188 static char irq_tab[7][5] = { 189 /*INT INTA INTB INTC INTD */ 190 /* note: IDSEL 17 is XLT only */ 191 {16+13, 16+13, 16+13, 16+13, 16+13}, /* IdSel 17, TULIP */ 192 { 16+8, 16+8, 16+9, 16+10, 16+11}, /* IdSel 18, slot 0 */ 193 {16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 19, slot 3 */ 194 {16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 20, slot 4 */ 195 { -1, -1, -1, -1, -1}, /* IdSel 21, PCEB */ 196 { 16+0, 16+0, 16+1, 16+2, 16+3}, /* IdSel 22, slot 2 */ 197 { 16+4, 16+4, 16+5, 16+6, 16+7}, /* IdSel 23, slot 1 */ 198 }; 199 const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5; 200 return COMMON_TABLE_LOOKUP; 201 } 202 203 static void 204 alcor_kill_arch(int mode) 205 { 206 cia_kill_arch(mode); 207 208 #ifndef ALPHA_RESTORE_SRM_SETUP 209 switch(mode) { 210 case LINUX_REBOOT_CMD_RESTART: 211 /* Who said DEC engineer's have no sense of humor? ;-) */ 212 if (alpha_using_srm) { 213 *(vuip) GRU_RESET = 0x0000dead; 214 mb(); 215 } 216 break; 217 case LINUX_REBOOT_CMD_HALT: 218 break; 219 case LINUX_REBOOT_CMD_POWER_OFF: 220 break; 221 } 222 223 halt(); 224 #endif 225 } 226 227 static void __init 228 alcor_init_pci(void) 229 { 230 struct pci_dev *dev; 231 232 cia_init_pci(); 233 234 /* 235 * Now we can look to see if we are really running on an XLT-type 236 * motherboard, by looking for a 21040 TULIP in slot 6, which is 237 * built into XLT and BRET/MAVERICK, but not available on ALCOR. 238 */ 239 dev = pci_get_device(PCI_VENDOR_ID_DEC, 240 PCI_DEVICE_ID_DEC_TULIP, 241 NULL); 242 if (dev && dev->devfn == PCI_DEVFN(6,0)) { 243 alpha_mv.sys.cia.gru_int_req_bits = XLT_GRU_INT_REQ_BITS; 244 printk(KERN_INFO "%s: Detected AS500 or XLT motherboard.\n", 245 __func__); 246 } 247 pci_dev_put(dev); 248 } 249 250 251 /* 252 * The System Vectors 253 */ 254 255 struct alpha_machine_vector alcor_mv __initmv = { 256 .vector_name = "Alcor", 257 DO_EV5_MMU, 258 DO_DEFAULT_RTC, 259 DO_CIA_IO, 260 .machine_check = cia_machine_check, 261 .max_isa_dma_address = ALPHA_ALCOR_MAX_ISA_DMA_ADDRESS, 262 .min_io_address = EISA_DEFAULT_IO_BASE, 263 .min_mem_address = CIA_DEFAULT_MEM_BASE, 264 265 .nr_irqs = 48, 266 .device_interrupt = alcor_device_interrupt, 267 268 .init_arch = cia_init_arch, 269 .init_irq = alcor_init_irq, 270 .init_rtc = common_init_rtc, 271 .init_pci = alcor_init_pci, 272 .kill_arch = alcor_kill_arch, 273 .pci_map_irq = alcor_map_irq, 274 .pci_swizzle = common_swizzle, 275 276 .sys = { .cia = { 277 .gru_int_req_bits = ALCOR_GRU_INT_REQ_BITS 278 }} 279 }; 280 ALIAS_MV(alcor) 281 282 struct alpha_machine_vector xlt_mv __initmv = { 283 .vector_name = "XLT", 284 DO_EV5_MMU, 285 DO_DEFAULT_RTC, 286 DO_CIA_IO, 287 .machine_check = cia_machine_check, 288 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 289 .min_io_address = EISA_DEFAULT_IO_BASE, 290 .min_mem_address = CIA_DEFAULT_MEM_BASE, 291 292 .nr_irqs = 48, 293 .device_interrupt = alcor_device_interrupt, 294 295 .init_arch = cia_init_arch, 296 .init_irq = alcor_init_irq, 297 .init_rtc = common_init_rtc, 298 .init_pci = alcor_init_pci, 299 .kill_arch = alcor_kill_arch, 300 .pci_map_irq = alcor_map_irq, 301 .pci_swizzle = common_swizzle, 302 303 .sys = { .cia = { 304 .gru_int_req_bits = XLT_GRU_INT_REQ_BITS 305 }} 306 }; 307 308 /* No alpha_mv alias for XLT, since we compile it in unconditionally 309 with ALCOR; setup_arch knows how to cope. */ 310