xref: /openbmc/linux/arch/alpha/kernel/ptrace.c (revision 95e9fd10)
1 /* ptrace.c */
2 /* By Ross Biro 1/23/92 */
3 /* edited by Linus Torvalds */
4 /* mangled further by Bob Manson (manson@santafe.edu) */
5 /* more mutilation by David Mosberger (davidm@azstarnet.com) */
6 
7 #include <linux/kernel.h>
8 #include <linux/sched.h>
9 #include <linux/mm.h>
10 #include <linux/smp.h>
11 #include <linux/errno.h>
12 #include <linux/ptrace.h>
13 #include <linux/user.h>
14 #include <linux/security.h>
15 #include <linux/signal.h>
16 
17 #include <asm/uaccess.h>
18 #include <asm/pgtable.h>
19 #include <asm/fpu.h>
20 
21 #include "proto.h"
22 
23 #define DEBUG	DBG_MEM
24 #undef DEBUG
25 
26 #ifdef DEBUG
27 enum {
28 	DBG_MEM		= (1<<0),
29 	DBG_BPT		= (1<<1),
30 	DBG_MEM_ALL	= (1<<2)
31 };
32 #define DBG(fac,args)	{if ((fac) & DEBUG) printk args;}
33 #else
34 #define DBG(fac,args)
35 #endif
36 
37 #define BREAKINST	0x00000080	/* call_pal bpt */
38 
39 /*
40  * does not yet catch signals sent when the child dies.
41  * in exit.c or in signal.c.
42  */
43 
44 /*
45  * Processes always block with the following stack-layout:
46  *
47  *  +================================+ <---- task + 2*PAGE_SIZE
48  *  | PALcode saved frame (ps, pc,   | ^
49  *  | gp, a0, a1, a2)		     | |
50  *  +================================+ | struct pt_regs
51  *  |	        		     | |
52  *  | frame generated by SAVE_ALL    | |
53  *  |	        		     | v
54  *  +================================+
55  *  |	        		     | ^
56  *  | frame saved by do_switch_stack | | struct switch_stack
57  *  |	        		     | v
58  *  +================================+
59  */
60 
61 /*
62  * The following table maps a register index into the stack offset at
63  * which the register is saved.  Register indices are 0-31 for integer
64  * regs, 32-63 for fp regs, and 64 for the pc.  Notice that sp and
65  * zero have no stack-slot and need to be treated specially (see
66  * get_reg/put_reg below).
67  */
68 enum {
69 	REG_R0 = 0, REG_F0 = 32, REG_FPCR = 63, REG_PC = 64
70 };
71 
72 #define PT_REG(reg) \
73   (PAGE_SIZE*2 - sizeof(struct pt_regs) + offsetof(struct pt_regs, reg))
74 
75 #define SW_REG(reg) \
76  (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \
77   + offsetof(struct switch_stack, reg))
78 
79 static int regoff[] = {
80 	PT_REG(	   r0), PT_REG(	   r1), PT_REG(	   r2), PT_REG(	  r3),
81 	PT_REG(	   r4), PT_REG(	   r5), PT_REG(	   r6), PT_REG(	  r7),
82 	PT_REG(	   r8), SW_REG(	   r9), SW_REG(	  r10), SW_REG(	 r11),
83 	SW_REG(	  r12), SW_REG(	  r13), SW_REG(	  r14), SW_REG(	 r15),
84 	PT_REG(	  r16), PT_REG(	  r17), PT_REG(	  r18), PT_REG(	 r19),
85 	PT_REG(	  r20), PT_REG(	  r21), PT_REG(	  r22), PT_REG(	 r23),
86 	PT_REG(	  r24), PT_REG(	  r25), PT_REG(	  r26), PT_REG(	 r27),
87 	PT_REG(	  r28), PT_REG(	   gp),		   -1,		   -1,
88 	SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]),
89 	SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]),
90 	SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]),
91 	SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]),
92 	SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]),
93 	SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]),
94 	SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]),
95 	SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]),
96 	PT_REG(	   pc)
97 };
98 
99 static unsigned long zero;
100 
101 /*
102  * Get address of register REGNO in task TASK.
103  */
104 static unsigned long *
105 get_reg_addr(struct task_struct * task, unsigned long regno)
106 {
107 	unsigned long *addr;
108 
109 	if (regno == 30) {
110 		addr = &task_thread_info(task)->pcb.usp;
111 	} else if (regno == 65) {
112 		addr = &task_thread_info(task)->pcb.unique;
113 	} else if (regno == 31 || regno > 65) {
114 		zero = 0;
115 		addr = &zero;
116 	} else {
117 		addr = task_stack_page(task) + regoff[regno];
118 	}
119 	return addr;
120 }
121 
122 /*
123  * Get contents of register REGNO in task TASK.
124  */
125 static unsigned long
126 get_reg(struct task_struct * task, unsigned long regno)
127 {
128 	/* Special hack for fpcr -- combine hardware and software bits.  */
129 	if (regno == 63) {
130 		unsigned long fpcr = *get_reg_addr(task, regno);
131 		unsigned long swcr
132 		  = task_thread_info(task)->ieee_state & IEEE_SW_MASK;
133 		swcr = swcr_update_status(swcr, fpcr);
134 		return fpcr | swcr;
135 	}
136 	return *get_reg_addr(task, regno);
137 }
138 
139 /*
140  * Write contents of register REGNO in task TASK.
141  */
142 static int
143 put_reg(struct task_struct *task, unsigned long regno, unsigned long data)
144 {
145 	if (regno == 63) {
146 		task_thread_info(task)->ieee_state
147 		  = ((task_thread_info(task)->ieee_state & ~IEEE_SW_MASK)
148 		     | (data & IEEE_SW_MASK));
149 		data = (data & FPCR_DYN_MASK) | ieee_swcr_to_fpcr(data);
150 	}
151 	*get_reg_addr(task, regno) = data;
152 	return 0;
153 }
154 
155 static inline int
156 read_int(struct task_struct *task, unsigned long addr, int * data)
157 {
158 	int copied = access_process_vm(task, addr, data, sizeof(int), 0);
159 	return (copied == sizeof(int)) ? 0 : -EIO;
160 }
161 
162 static inline int
163 write_int(struct task_struct *task, unsigned long addr, int data)
164 {
165 	int copied = access_process_vm(task, addr, &data, sizeof(int), 1);
166 	return (copied == sizeof(int)) ? 0 : -EIO;
167 }
168 
169 /*
170  * Set breakpoint.
171  */
172 int
173 ptrace_set_bpt(struct task_struct * child)
174 {
175 	int displ, i, res, reg_b, nsaved = 0;
176 	unsigned int insn, op_code;
177 	unsigned long pc;
178 
179 	pc  = get_reg(child, REG_PC);
180 	res = read_int(child, pc, (int *) &insn);
181 	if (res < 0)
182 		return res;
183 
184 	op_code = insn >> 26;
185 	if (op_code >= 0x30) {
186 		/*
187 		 * It's a branch: instead of trying to figure out
188 		 * whether the branch will be taken or not, we'll put
189 		 * a breakpoint at either location.  This is simpler,
190 		 * more reliable, and probably not a whole lot slower
191 		 * than the alternative approach of emulating the
192 		 * branch (emulation can be tricky for fp branches).
193 		 */
194 		displ = ((s32)(insn << 11)) >> 9;
195 		task_thread_info(child)->bpt_addr[nsaved++] = pc + 4;
196 		if (displ)		/* guard against unoptimized code */
197 			task_thread_info(child)->bpt_addr[nsaved++]
198 			  = pc + 4 + displ;
199 		DBG(DBG_BPT, ("execing branch\n"));
200 	} else if (op_code == 0x1a) {
201 		reg_b = (insn >> 16) & 0x1f;
202 		task_thread_info(child)->bpt_addr[nsaved++] = get_reg(child, reg_b);
203 		DBG(DBG_BPT, ("execing jump\n"));
204 	} else {
205 		task_thread_info(child)->bpt_addr[nsaved++] = pc + 4;
206 		DBG(DBG_BPT, ("execing normal insn\n"));
207 	}
208 
209 	/* install breakpoints: */
210 	for (i = 0; i < nsaved; ++i) {
211 		res = read_int(child, task_thread_info(child)->bpt_addr[i],
212 			       (int *) &insn);
213 		if (res < 0)
214 			return res;
215 		task_thread_info(child)->bpt_insn[i] = insn;
216 		DBG(DBG_BPT, ("    -> next_pc=%lx\n",
217 			      task_thread_info(child)->bpt_addr[i]));
218 		res = write_int(child, task_thread_info(child)->bpt_addr[i],
219 				BREAKINST);
220 		if (res < 0)
221 			return res;
222 	}
223 	task_thread_info(child)->bpt_nsaved = nsaved;
224 	return 0;
225 }
226 
227 /*
228  * Ensure no single-step breakpoint is pending.  Returns non-zero
229  * value if child was being single-stepped.
230  */
231 int
232 ptrace_cancel_bpt(struct task_struct * child)
233 {
234 	int i, nsaved = task_thread_info(child)->bpt_nsaved;
235 
236 	task_thread_info(child)->bpt_nsaved = 0;
237 
238 	if (nsaved > 2) {
239 		printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
240 		nsaved = 2;
241 	}
242 
243 	for (i = 0; i < nsaved; ++i) {
244 		write_int(child, task_thread_info(child)->bpt_addr[i],
245 			  task_thread_info(child)->bpt_insn[i]);
246 	}
247 	return (nsaved != 0);
248 }
249 
250 void user_enable_single_step(struct task_struct *child)
251 {
252 	/* Mark single stepping.  */
253 	task_thread_info(child)->bpt_nsaved = -1;
254 }
255 
256 void user_disable_single_step(struct task_struct *child)
257 {
258 	ptrace_cancel_bpt(child);
259 }
260 
261 /*
262  * Called by kernel/ptrace.c when detaching..
263  *
264  * Make sure the single step bit is not set.
265  */
266 void ptrace_disable(struct task_struct *child)
267 {
268 	user_disable_single_step(child);
269 }
270 
271 long arch_ptrace(struct task_struct *child, long request,
272 		 unsigned long addr, unsigned long data)
273 {
274 	unsigned long tmp;
275 	size_t copied;
276 	long ret;
277 
278 	switch (request) {
279 	/* When I and D space are separate, these will need to be fixed.  */
280 	case PTRACE_PEEKTEXT: /* read word at location addr. */
281 	case PTRACE_PEEKDATA:
282 		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
283 		ret = -EIO;
284 		if (copied != sizeof(tmp))
285 			break;
286 
287 		force_successful_syscall_return();
288 		ret = tmp;
289 		break;
290 
291 	/* Read register number ADDR. */
292 	case PTRACE_PEEKUSR:
293 		force_successful_syscall_return();
294 		ret = get_reg(child, addr);
295 		DBG(DBG_MEM, ("peek $%lu->%#lx\n", addr, ret));
296 		break;
297 
298 	/* When I and D space are separate, this will have to be fixed.  */
299 	case PTRACE_POKETEXT: /* write the word at location addr. */
300 	case PTRACE_POKEDATA:
301 		ret = generic_ptrace_pokedata(child, addr, data);
302 		break;
303 
304 	case PTRACE_POKEUSR: /* write the specified register */
305 		DBG(DBG_MEM, ("poke $%lu<-%#lx\n", addr, data));
306 		ret = put_reg(child, addr, data);
307 		break;
308 	default:
309 		ret = ptrace_request(child, request, addr, data);
310 		break;
311 	}
312 	return ret;
313 }
314 
315 asmlinkage void
316 syscall_trace(void)
317 {
318 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
319 		return;
320 	if (!(current->ptrace & PT_PTRACED))
321 		return;
322 	/* The 0x80 provides a way for the tracing parent to distinguish
323 	   between a syscall stop and SIGTRAP delivery */
324 	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
325 				 ? 0x80 : 0));
326 
327 	/*
328 	 * This isn't the same as continuing with a signal, but it will do
329 	 * for normal use.  strace only continues with a signal if the
330 	 * stopping signal is not SIGTRAP.  -brl
331 	 */
332 	if (current->exit_code) {
333 		send_sig(current->exit_code, current, 1);
334 		current->exit_code = 0;
335 	}
336 }
337