xref: /openbmc/linux/arch/alpha/kernel/irq_i8259.c (revision ba61bb17)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *      linux/arch/alpha/kernel/irq_i8259.c
4  *
5  * This is the 'legacy' 8259A Programmable Interrupt Controller,
6  * present in the majority of PC/AT boxes.
7  *
8  * Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c.
9  */
10 
11 #include <linux/init.h>
12 #include <linux/cache.h>
13 #include <linux/sched.h>
14 #include <linux/irq.h>
15 #include <linux/interrupt.h>
16 
17 #include <asm/io.h>
18 
19 #include "proto.h"
20 #include "irq_impl.h"
21 
22 
23 /* Note mask bit is true for DISABLED irqs.  */
24 static unsigned int cached_irq_mask = 0xffff;
25 static DEFINE_SPINLOCK(i8259_irq_lock);
26 
27 static inline void
28 i8259_update_irq_hw(unsigned int irq, unsigned long mask)
29 {
30 	int port = 0x21;
31 	if (irq & 8) mask >>= 8;
32 	if (irq & 8) port = 0xA1;
33 	outb(mask, port);
34 }
35 
36 inline void
37 i8259a_enable_irq(struct irq_data *d)
38 {
39 	spin_lock(&i8259_irq_lock);
40 	i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
41 	spin_unlock(&i8259_irq_lock);
42 }
43 
44 static inline void
45 __i8259a_disable_irq(unsigned int irq)
46 {
47 	i8259_update_irq_hw(irq, cached_irq_mask |= 1 << irq);
48 }
49 
50 void
51 i8259a_disable_irq(struct irq_data *d)
52 {
53 	spin_lock(&i8259_irq_lock);
54 	__i8259a_disable_irq(d->irq);
55 	spin_unlock(&i8259_irq_lock);
56 }
57 
58 void
59 i8259a_mask_and_ack_irq(struct irq_data *d)
60 {
61 	unsigned int irq = d->irq;
62 
63 	spin_lock(&i8259_irq_lock);
64 	__i8259a_disable_irq(irq);
65 
66 	/* Ack the interrupt making it the lowest priority.  */
67 	if (irq >= 8) {
68 		outb(0xE0 | (irq - 8), 0xa0);   /* ack the slave */
69 		irq = 2;
70 	}
71 	outb(0xE0 | irq, 0x20);			/* ack the master */
72 	spin_unlock(&i8259_irq_lock);
73 }
74 
75 struct irq_chip i8259a_irq_type = {
76 	.name		= "XT-PIC",
77 	.irq_unmask	= i8259a_enable_irq,
78 	.irq_mask	= i8259a_disable_irq,
79 	.irq_mask_ack	= i8259a_mask_and_ack_irq,
80 };
81 
82 void __init
83 init_i8259a_irqs(void)
84 {
85 	static struct irqaction cascade = {
86 		.handler	= no_action,
87 		.name		= "cascade",
88 	};
89 
90 	long i;
91 
92 	outb(0xff, 0x21);	/* mask all of 8259A-1 */
93 	outb(0xff, 0xA1);	/* mask all of 8259A-2 */
94 
95 	for (i = 0; i < 16; i++) {
96 		irq_set_chip_and_handler(i, &i8259a_irq_type, handle_level_irq);
97 	}
98 
99 	setup_irq(2, &cascade);
100 }
101 
102 
103 #if defined(CONFIG_ALPHA_GENERIC)
104 # define IACK_SC	alpha_mv.iack_sc
105 #elif defined(CONFIG_ALPHA_APECS)
106 # define IACK_SC	APECS_IACK_SC
107 #elif defined(CONFIG_ALPHA_LCA)
108 # define IACK_SC	LCA_IACK_SC
109 #elif defined(CONFIG_ALPHA_CIA)
110 # define IACK_SC	CIA_IACK_SC
111 #elif defined(CONFIG_ALPHA_PYXIS)
112 # define IACK_SC	PYXIS_IACK_SC
113 #elif defined(CONFIG_ALPHA_TITAN)
114 # define IACK_SC	TITAN_IACK_SC
115 #elif defined(CONFIG_ALPHA_TSUNAMI)
116 # define IACK_SC	TSUNAMI_IACK_SC
117 #elif defined(CONFIG_ALPHA_IRONGATE)
118 # define IACK_SC        IRONGATE_IACK_SC
119 #endif
120 /* Note that CONFIG_ALPHA_POLARIS is intentionally left out here, since
121    sys_rx164 wants to use isa_no_iack_sc_device_interrupt for some reason.  */
122 
123 #if defined(IACK_SC)
124 void
125 isa_device_interrupt(unsigned long vector)
126 {
127 	/*
128 	 * Generate a PCI interrupt acknowledge cycle.  The PIC will
129 	 * respond with the interrupt vector of the highest priority
130 	 * interrupt that is pending.  The PALcode sets up the
131 	 * interrupts vectors such that irq level L generates vector L.
132 	 */
133 	int j = *(vuip) IACK_SC;
134 	j &= 0xff;
135 	handle_irq(j);
136 }
137 #endif
138 
139 #if defined(CONFIG_ALPHA_GENERIC) || !defined(IACK_SC)
140 void
141 isa_no_iack_sc_device_interrupt(unsigned long vector)
142 {
143 	unsigned long pic;
144 
145 	/*
146 	 * It seems to me that the probability of two or more *device*
147 	 * interrupts occurring at almost exactly the same time is
148 	 * pretty low.  So why pay the price of checking for
149 	 * additional interrupts here if the common case can be
150 	 * handled so much easier?
151 	 */
152 	/*
153 	 *  The first read of gives you *all* interrupting lines.
154 	 *  Therefore, read the mask register and and out those lines
155 	 *  not enabled.  Note that some documentation has 21 and a1
156 	 *  write only.  This is not true.
157 	 */
158 	pic = inb(0x20) | (inb(0xA0) << 8);	/* read isr */
159 	pic &= 0xFFFB;				/* mask out cascade & hibits */
160 
161 	while (pic) {
162 		int j = ffz(~pic);
163 		pic &= pic - 1;
164 		handle_irq(j);
165 	}
166 }
167 #endif
168