xref: /openbmc/linux/arch/alpha/kernel/es1888.c (revision 4f3db074)
1 /*
2  *	linux/arch/alpha/kernel/es1888.c
3  *
4  * Init the built-in ES1888 sound chip (SB16 compatible)
5  */
6 
7 #include <linux/init.h>
8 #include <asm/io.h>
9 #include "proto.h"
10 
11 void __init
12 es1888_init(void)
13 {
14 	/* Sequence of IO reads to init the audio controller */
15 	inb(0x0229);
16 	inb(0x0229);
17 	inb(0x0229);
18 	inb(0x022b);
19 	inb(0x0229);
20 	inb(0x022b);
21 	inb(0x0229);
22 	inb(0x0229);
23 	inb(0x022b);
24 	inb(0x0229);
25 	inb(0x0220); /* This sets the base address to 0x220 */
26 
27 	/* Sequence to set DMA channels */
28 	outb(0x01, 0x0226);		/* reset */
29 	inb(0x0226);			/* pause */
30 	outb(0x00, 0x0226);		/* release reset */
31 	while (!(inb(0x022e) & 0x80))	/* wait for bit 7 to assert*/
32 		continue;
33 	inb(0x022a);			/* pause */
34 	outb(0xc6, 0x022c);		/* enable extended mode */
35 	inb(0x022a);			/* pause, also forces the write */
36 	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
37 		continue;
38 	outb(0xb1, 0x022c);		/* setup for write to Interrupt CR */
39 	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
40 		continue;
41 	outb(0x14, 0x022c);		/* set IRQ 5 */
42 	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
43 		continue;
44 	outb(0xb2, 0x022c);		/* setup for write to DMA CR */
45 	while (inb(0x022c) & 0x80)	/* wait for bit 7 to deassert */
46 		continue;
47 	outb(0x18, 0x022c);		/* set DMA channel 1 */
48 	inb(0x022c);			/* force the write */
49 }
50