xref: /openbmc/linux/arch/alpha/Kconfig (revision c0891ac1)
1# SPDX-License-Identifier: GPL-2.0
2config ALPHA
3	bool
4	default y
5	select ARCH_32BIT_USTAT_F_TINODE
6	select ARCH_MIGHT_HAVE_PC_PARPORT
7	select ARCH_MIGHT_HAVE_PC_SERIO
8	select ARCH_NO_PREEMPT
9	select ARCH_NO_SG_CHAIN
10	select ARCH_USE_CMPXCHG_LOCKREF
11	select DMA_OPS if PCI
12	select FORCE_PCI if !ALPHA_JENSEN
13	select PCI_DOMAINS if PCI
14	select PCI_SYSCALL if PCI
15	select HAVE_AOUT
16	select HAVE_ASM_MODVERSIONS
17	select HAVE_PCSPKR_PLATFORM
18	select HAVE_PERF_EVENTS
19	select NEED_DMA_MAP_STATE
20	select NEED_SG_DMA_LENGTH
21	select VIRT_TO_BUS
22	select GENERIC_IRQ_PROBE
23	select GENERIC_PCI_IOMAP if PCI
24	select AUTO_IRQ_AFFINITY if SMP
25	select GENERIC_IRQ_SHOW
26	select ARCH_WANT_IPC_PARSE_VERSION
27	select ARCH_HAVE_NMI_SAFE_CMPXCHG
28	select AUDIT_ARCH
29	select GENERIC_CPU_VULNERABILITIES
30	select GENERIC_SMP_IDLE_THREAD
31	select GENERIC_STRNCPY_FROM_USER
32	select GENERIC_STRNLEN_USER
33	select HAVE_ARCH_AUDITSYSCALL
34	select HAVE_MOD_ARCH_SPECIFIC
35	select MODULES_USE_ELF_RELA
36	select ODD_RT_SIGACTION
37	select OLD_SIGSUSPEND
38	select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
39	select MMU_GATHER_NO_RANGE
40	select SET_FS
41	select SPARSEMEM_EXTREME if SPARSEMEM
42	select ZONE_DMA
43	help
44	  The Alpha is a 64-bit general-purpose processor designed and
45	  marketed by the Digital Equipment Corporation of blessed memory,
46	  now Hewlett-Packard.  The Alpha Linux project has a home page at
47	  <http://www.alphalinux.org/>.
48
49config 64BIT
50	def_bool y
51
52config MMU
53	bool
54	default y
55
56config ARCH_HAS_ILOG2_U32
57	bool
58	default n
59
60config ARCH_HAS_ILOG2_U64
61	bool
62	default n
63
64config GENERIC_CALIBRATE_DELAY
65	bool
66	default y
67
68config GENERIC_ISA_DMA
69	bool
70	default y
71
72config PGTABLE_LEVELS
73	int
74	default 3
75
76config AUDIT_ARCH
77	bool
78
79menu "System setup"
80
81choice
82	prompt "Alpha system type"
83	default ALPHA_GENERIC
84	help
85	  This is the system type of your hardware.  A "generic" kernel will
86	  run on any supported Alpha system. However, if you configure a
87	  kernel for your specific system, it will be faster and smaller.
88
89	  To find out what type of Alpha system you have, you may want to
90	  check out the Linux/Alpha FAQ, accessible on the WWW from
91	  <http://www.alphalinux.org/>. In summary:
92
93	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366
94	  Alpha-XL            XL-233, XL-266
95	  AlphaBook1          Alpha laptop
96	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
97	  Cabriolet           AlphaPC64, AlphaPCI64
98	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L
99	  EB164               EB164 21164 evaluation board
100	  EB64+               EB64+ 21064 evaluation board
101	  EB66                EB66 21066 evaluation board
102	  EB66+               EB66+ 21066 evaluation board
103	  Jensen              DECpc 150, DEC 2000 models 300, 500
104	  LX164               AlphaPC164-LX
105	  Lynx                AS 2100A
106	  Miata               Personal Workstation 433/500/600 a/au
107	  Marvel              AlphaServer ES47 / ES80 / GS1280
108	  Mikasa              AS 1000
109	  Noname              AXPpci33, UDB (Multia)
110	  Noritake            AS 1000A, AS 600A, AS 800
111	  PC164               AlphaPC164
112	  Rawhide             AS 1200, AS 4000, AS 4100
113	  Ruffian             RPX164-2, AlphaPC164-UX, AlphaPC164-BX
114	  SX164               AlphaPC164-SX
115	  Sable               AS 2000, AS 2100
116	  Shark               DS 20L
117	  Takara              Takara (OEM)
118	  Titan               AlphaServer ES45 / DS25 / DS15
119	  Wildfire            AlphaServer GS 40/80/160/320
120
121	  If you don't know what to do, choose "generic".
122
123config ALPHA_GENERIC
124	bool "Generic"
125	depends on TTY
126	select HAVE_EISA
127	help
128	  A generic kernel will run on all supported Alpha hardware.
129
130config ALPHA_ALCOR
131	bool "Alcor/Alpha-XLT"
132	select HAVE_EISA
133	help
134	  For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
135	  slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
136	  Address, CIA) - a 383 pin plastic PGA).  It provides a DRAM
137	  controller (256-bit memory bus) and a PCI interface.  It also does
138	  all the work required to support an external Bcache and to maintain
139	  memory coherence when a PCI device DMAs into (or out of) memory.
140
141config ALPHA_XL
142	bool "Alpha-XL"
143	help
144	  XL-233 and XL-266-based Alpha systems.
145
146config ALPHA_BOOK1
147	bool "AlphaBook1"
148	help
149	  Dec AlphaBook1/Burns Alpha-based laptops.
150
151config ALPHA_AVANTI_CH
152	bool "Avanti"
153
154config ALPHA_CABRIOLET
155	bool "Cabriolet"
156	help
157	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
158	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
159	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
160	  Bcache SIMMs.  Requires power supply with 3.3V output.
161
162config ALPHA_DP264
163	bool "DP264"
164	help
165	  Various 21264 systems with the tsunami core logic chipset.
166	  API Networks: 264DP, UP2000(+), CS20;
167	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
168
169config ALPHA_EB164
170	bool "EB164"
171	help
172	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
173	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
174	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
175	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
176	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
177	  motherboard.  Requires power supply with 3.3V output.
178
179config ALPHA_EB64P_CH
180	bool "EB64+"
181
182config ALPHA_EB66
183	bool "EB66"
184	help
185	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
186	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
187	  supply.  The EB66 schematic was published as a marketing poster
188	  advertising the 21066 as "the first microprocessor in the world with
189	  embedded PCI".
190
191config ALPHA_EB66P
192	bool "EB66+"
193	help
194	  Later variant of the EB66 board.
195
196config ALPHA_EIGER
197	bool "Eiger"
198	help
199	  Apparently an obscure OEM single-board computer based on the
200	  Typhoon/Tsunami chipset family. Information on it is scanty.
201
202config ALPHA_JENSEN
203	bool "Jensen"
204	depends on BROKEN
205	select HAVE_EISA
206	help
207	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
208	  of the first-generation Alpha systems. A number of these systems
209	  seem to be available on the second- hand market. The Jensen is a
210	  floor-standing tower system which originally used a 150MHz 21064 It
211	  used programmable logic to interface a 486 EISA I/O bridge to the
212	  CPU.
213
214config ALPHA_LX164
215	bool "LX164"
216	help
217	  A technical overview of this board is available at
218	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
219
220config ALPHA_LYNX
221	bool "Lynx"
222	select HAVE_EISA
223	help
224	  AlphaServer 2100A-based systems.
225
226config ALPHA_MARVEL
227	bool "Marvel"
228	help
229	  AlphaServer ES47 / ES80 / GS1280 based on EV7.
230
231config ALPHA_MIATA
232	bool "Miata"
233	select HAVE_EISA
234	help
235	  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
236	  or 600au).
237
238config ALPHA_MIKASA
239	bool "Mikasa"
240	help
241	  AlphaServer 1000-based Alpha systems.
242
243config ALPHA_NAUTILUS
244	bool "Nautilus"
245	help
246	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
247
248config ALPHA_NONAME_CH
249	bool "Noname"
250
251config ALPHA_NORITAKE
252	bool "Noritake"
253	select HAVE_EISA
254	help
255	  AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
256	  systems.
257
258config ALPHA_PC164
259	bool "PC164"
260
261config ALPHA_P2K
262	bool "Platform2000"
263
264config ALPHA_RAWHIDE
265	bool "Rawhide"
266	select HAVE_EISA
267	help
268	  AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
269	  See HOWTO at
270	  <http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
271
272config ALPHA_RUFFIAN
273	bool "Ruffian"
274	help
275	  Samsung APC164UX.  There is a page on known problems and workarounds
276	  at <http://www.alphalinux.org/faq/FAQ-11.html>.
277
278config ALPHA_RX164
279	bool "RX164"
280
281config ALPHA_SX164
282	bool "SX164"
283
284config ALPHA_SABLE
285	bool "Sable"
286	select HAVE_EISA
287	help
288	  Digital AlphaServer 2000 and 2100-based systems.
289
290config ALPHA_SHARK
291	bool "Shark"
292
293config ALPHA_TAKARA
294	bool "Takara"
295	help
296	  Alpha 11164-based OEM single-board computer.
297
298config ALPHA_TITAN
299	bool "Titan"
300	help
301	  AlphaServer ES45/DS25 SMP based on EV68 and Titan chipset.
302
303config ALPHA_WILDFIRE
304	bool "Wildfire"
305	help
306	  AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
307
308endchoice
309
310# clear all implied options (don't want default values for those):
311# Most of these machines have ISA slots; not exactly sure which don't,
312# and this doesn't activate hordes of code, so do it always.
313config ISA
314	bool
315	default y
316	help
317	  Find out whether you have ISA slots on your motherboard.  ISA is the
318	  name of a bus system, i.e. the way the CPU talks to the other stuff
319	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
320	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
321	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
322
323config ISA_DMA_API
324	bool
325	default y
326
327config ALPHA_NONAME
328	bool
329	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
330	default y
331	help
332	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
333	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
334	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
335	  is a baby-AT size, and runs from a standard PC power supply. It has
336	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
337	  2 versions, with either PS/2 or large DIN connectors for the
338	  keyboard.
339
340config ALPHA_EV4
341	bool
342	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
343	default y if !ALPHA_LYNX
344
345config ALPHA_LCA
346	bool
347	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
348	default y
349
350config ALPHA_APECS
351	bool
352	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
353	default y
354
355config ALPHA_EB64P
356	bool
357	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
358	default y
359	help
360	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
361	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
362	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
363	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
364	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
365	  Runs from standard PC power supply.
366
367config ALPHA_EV5
368	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
369	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
370
371config ALPHA_EV4
372	bool
373	default y if ALPHA_LYNX && !ALPHA_EV5
374
375config ALPHA_CIA
376	bool
377	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
378	default y
379
380config ALPHA_EV56
381	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
382	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
383
384config ALPHA_EV56
385	prompt "EV56 CPU (speed >= 333MHz)?"
386	depends on ALPHA_NORITAKE || ALPHA_PRIMO
387
388config ALPHA_EV56
389	prompt "EV56 CPU (speed >= 400MHz)?"
390	depends on ALPHA_RAWHIDE
391
392config ALPHA_PRIMO
393	bool "EV5 CPU daughtercard (model 5/xxx)?"
394	depends on ALPHA_NORITAKE || ALPHA_MIKASA
395	help
396	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
397
398config ALPHA_GAMMA
399	bool "EV5 CPU(s) (model 5/xxx)?"
400	depends on ALPHA_SABLE
401	help
402	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
403
404config ALPHA_GAMMA
405	bool
406	depends on ALPHA_LYNX
407	default y
408
409config ALPHA_T2
410	bool
411	depends on ALPHA_SABLE || ALPHA_LYNX
412	default y
413
414config ALPHA_PYXIS
415	bool
416	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN
417	default y
418
419config ALPHA_EV6
420	bool
421	depends on ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER || ALPHA_MARVEL
422	default y
423
424config ALPHA_TSUNAMI
425	bool
426	depends on ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER
427	default y
428
429config ALPHA_EV67
430	bool "EV67 (or later) CPU (speed > 600MHz)?" if ALPHA_DP264 || ALPHA_EIGER
431	default y if ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
432	help
433	  Is this a machine based on the EV67 core?  If in doubt, select N here
434	  and the machine will be treated as an EV6.
435
436config ALPHA_MCPCIA
437	bool
438	depends on ALPHA_RAWHIDE
439	default y
440
441config ALPHA_POLARIS
442	bool
443	depends on ALPHA_RX164
444	default y
445
446config ALPHA_IRONGATE
447	bool
448	depends on ALPHA_NAUTILUS
449	default y
450
451config GENERIC_HWEIGHT
452	bool
453	default y if !ALPHA_EV67
454
455config ALPHA_AVANTI
456	bool
457	depends on ALPHA_XL || ALPHA_AVANTI_CH
458	default y
459	help
460	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
461	  Alphas. Info at
462	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
463
464config ALPHA_BROKEN_IRQ_MASK
465	bool
466	depends on ALPHA_GENERIC || ALPHA_PC164
467	default y
468
469config VGA_HOSE
470	bool
471	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
472	default y
473	help
474	  Support VGA on an arbitrary hose; needed for several platforms
475	  which always have multiple hoses, and whose consoles support it.
476
477
478config ALPHA_QEMU
479	bool "Run under QEMU emulation"
480	depends on !ALPHA_GENERIC
481	help
482	  Assume the presence of special features supported by QEMU PALcode
483	  that reduce the overhead of system emulation.
484
485	  Generic kernels will auto-detect QEMU.  But when building a
486	  system-specific kernel, the assumption is that we want to
487	  eliminate as many runtime tests as possible.
488
489	  If unsure, say N.
490
491
492config ALPHA_SRM
493	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
494	depends on TTY
495	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
496	help
497	  There are two different types of booting firmware on Alphas: SRM,
498	  which is command line driven, and ARC, which uses menus and arrow
499	  keys. Details about the Linux/Alpha booting process are contained in
500	  the Linux/Alpha FAQ, accessible on the WWW from
501	  <http://www.alphalinux.org/>.
502
503	  The usual way to load Linux on an Alpha machine is to use MILO
504	  (a bootloader that lets you pass command line parameters to the
505	  kernel just like lilo does for the x86 architecture) which can be
506	  loaded either from ARC or can be installed directly as a permanent
507	  firmware replacement from floppy (which requires changing a certain
508	  jumper on the motherboard). If you want to do either of these, say N
509	  here. If MILO doesn't work on your system (true for Jensen
510	  motherboards), you can bypass it altogether and boot Linux directly
511	  from an SRM console; say Y here in order to do that. Note that you
512	  won't be able to boot from an IDE disk using SRM.
513
514	  If unsure, say N.
515
516config ARCH_MAY_HAVE_PC_FDC
517	def_bool y
518
519config SMP
520	bool "Symmetric multi-processing support"
521	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
522	help
523	  This enables support for systems with more than one CPU. If you have
524	  a system with only one CPU, say N. If you have a system with more
525	  than one CPU, say Y.
526
527	  If you say N here, the kernel will run on uni- and multiprocessor
528	  machines, but will use only one CPU of a multiprocessor machine. If
529	  you say Y here, the kernel will run on many, but not all,
530	  uniprocessor machines. On a uniprocessor machine, the kernel
531	  will run faster if you say N here.
532
533	  See also the SMP-HOWTO available at
534	  <https://www.tldp.org/docs.html#howto>.
535
536	  If you don't know what to do here, say N.
537
538config NR_CPUS
539	int "Maximum number of CPUs (2-32)"
540	range 2 32
541	depends on SMP
542	default "32" if ALPHA_GENERIC || ALPHA_MARVEL
543	default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
544	help
545	  MARVEL support can handle a maximum of 32 CPUs, all the others
546	  with working support have a maximum of 4 CPUs.
547
548config ARCH_SPARSEMEM_ENABLE
549	bool "Sparse Memory Support"
550	help
551	  Say Y to support efficient handling of discontiguous physical memory,
552	  for systems that have huge holes in the physical address space.
553
554config ALPHA_WTINT
555	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
556	default y if ALPHA_QEMU
557	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
558	default n if !ALPHA_SRM && !ALPHA_GENERIC
559	default y if SMP
560	help
561	  The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
562	  to sleep until the next interrupt.  This may reduce the power
563	  consumed, and the heat produced by the computer.  However, it has
564	  the side effect of making the cycle counter unreliable as a timing
565	  device across the sleep.
566
567	  For emulation under QEMU, definitely say Y here, as we have other
568	  mechanisms for measuring time than the cycle counter.
569
570	  For EV4 (but not LCA), EV5 and EV56 systems, or for systems running
571	  MILO, sleep mode is not supported so you might as well say N here.
572
573	  For SMP systems we cannot use the cycle counter for timing anyway,
574	  so you might as well say Y here.
575
576	  If unsure, say N.
577
578# LARGE_VMALLOC is racy, if you *really* need it then fix it first
579config ALPHA_LARGE_VMALLOC
580	bool
581	help
582	  Process creation and other aspects of virtual memory management can
583	  be streamlined if we restrict the kernel to one PGD for all vmalloc
584	  allocations.  This equates to about 8GB.
585
586	  Under normal circumstances, this is so far and above what is needed
587	  as to be laughable.  However, there are certain applications (such
588	  as benchmark-grade in-kernel web serving) that can make use of as
589	  much vmalloc space as is available.
590
591	  Say N unless you know you need gobs and gobs of vmalloc space.
592
593config VERBOSE_MCHECK
594	bool "Verbose Machine Checks"
595
596config VERBOSE_MCHECK_ON
597	int "Verbose Printing Mode (0=off, 1=on, 2=all)"
598	depends on VERBOSE_MCHECK
599	default 1
600	help
601	  This option allows the default printing mode to be set, and then
602	  possibly overridden by a boot command argument.
603
604	  For example, if one wanted the option of printing verbose
605	  machine checks, but wanted the default to be as if verbose
606	  machine check printing was turned off, then one would choose
607	  the printing mode to be 0. Then, upon reboot, one could add
608	  the boot command line "verbose_mcheck=1" to get the normal
609	  verbose machine check printing, or "verbose_mcheck=2" to get
610	  the maximum information available.
611
612	  Take the default (1) unless you want more control or more info.
613
614choice
615	prompt "Timer interrupt frequency (HZ)?"
616	default HZ_128 if ALPHA_QEMU
617	default HZ_1200 if ALPHA_RAWHIDE
618	default HZ_1024
619	help
620	  The frequency at which timer interrupts occur.  A high frequency
621	  minimizes latency, whereas a low frequency minimizes overhead of
622	  process accounting.  The later effect is especially significant
623	  when being run under QEMU.
624
625	  Note that some Alpha hardware cannot change the interrupt frequency
626	  of the timer.  If unsure, say 1024 (or 1200 for Rawhide).
627
628	config HZ_32
629		bool "32 Hz"
630	config HZ_64
631		bool "64 Hz"
632	config HZ_128
633		bool "128 Hz"
634	config HZ_256
635		bool "256 Hz"
636	config HZ_1024
637		bool "1024 Hz"
638	config HZ_1200
639		bool "1200 Hz"
640endchoice
641
642config HZ
643	int
644	default 32 if HZ_32
645	default 64 if HZ_64
646	default 128 if HZ_128
647	default 256 if HZ_256
648	default 1200 if HZ_1200
649	default 1024
650
651config SRM_ENV
652	tristate "SRM environment through procfs"
653	depends on PROC_FS
654	help
655	  If you enable this option, a subdirectory inside /proc called
656	  /proc/srm_environment will give you access to the all important
657	  SRM environment variables (those which have a name) and also
658	  to all others (by their internal number).
659
660	  SRM is something like a BIOS for Alpha machines. There are some
661	  other such BIOSes, like AlphaBIOS, which this driver cannot
662	  support (hey, that's not SRM!).
663
664	  Despite the fact that this driver doesn't work on all Alphas (but
665	  only on those which have SRM as their firmware), it's save to
666	  build it even if your particular machine doesn't know about SRM
667	  (or if you intend to compile a generic kernel). It will simply
668	  not create those subdirectory in /proc (and give you some warning,
669	  of course).
670
671	  This driver is also available as a module and will be called
672	  srm_env then.
673
674endmenu
675
676# DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
677# but we also need it if VGA_HOSE is set
678config DUMMY_CONSOLE
679	bool
680	depends on VGA_HOSE
681	default y
682