1# 2# General architecture dependent options 3# 4 5config OPROFILE 6 tristate "OProfile system profiling" 7 depends on PROFILING 8 depends on HAVE_OPROFILE 9 select RING_BUFFER 10 select RING_BUFFER_ALLOW_SWAP 11 help 12 OProfile is a profiling system capable of profiling the 13 whole system, include the kernel, kernel modules, libraries, 14 and applications. 15 16 If unsure, say N. 17 18config OPROFILE_EVENT_MULTIPLEX 19 bool "OProfile multiplexing support (EXPERIMENTAL)" 20 default n 21 depends on OPROFILE && X86 22 help 23 The number of hardware counters is limited. The multiplexing 24 feature enables OProfile to gather more events than counters 25 are provided by the hardware. This is realized by switching 26 between events at an user specified time interval. 27 28 If unsure, say N. 29 30config HAVE_OPROFILE 31 bool 32 33config OPROFILE_NMI_TIMER 34 def_bool y 35 depends on PERF_EVENTS && HAVE_PERF_EVENTS_NMI 36 37config KPROBES 38 bool "Kprobes" 39 depends on MODULES 40 depends on HAVE_KPROBES 41 select KALLSYMS 42 help 43 Kprobes allows you to trap at almost any kernel address and 44 execute a callback function. register_kprobe() establishes 45 a probepoint and specifies the callback. Kprobes is useful 46 for kernel debugging, non-intrusive instrumentation and testing. 47 If in doubt, say "N". 48 49config JUMP_LABEL 50 bool "Optimize very unlikely/likely branches" 51 depends on HAVE_ARCH_JUMP_LABEL 52 help 53 This option enables a transparent branch optimization that 54 makes certain almost-always-true or almost-always-false branch 55 conditions even cheaper to execute within the kernel. 56 57 Certain performance-sensitive kernel code, such as trace points, 58 scheduler functionality, networking code and KVM have such 59 branches and include support for this optimization technique. 60 61 If it is detected that the compiler has support for "asm goto", 62 the kernel will compile such branches with just a nop 63 instruction. When the condition flag is toggled to true, the 64 nop will be converted to a jump instruction to execute the 65 conditional block of instructions. 66 67 This technique lowers overhead and stress on the branch prediction 68 of the processor and generally makes the kernel faster. The update 69 of the condition is slower, but those are always very rare. 70 71 ( On 32-bit x86, the necessary options added to the compiler 72 flags may increase the size of the kernel slightly. ) 73 74config OPTPROBES 75 def_bool y 76 depends on KPROBES && HAVE_OPTPROBES 77 depends on !PREEMPT 78 79config KPROBES_ON_FTRACE 80 def_bool y 81 depends on KPROBES && HAVE_KPROBES_ON_FTRACE 82 depends on DYNAMIC_FTRACE_WITH_REGS 83 help 84 If function tracer is enabled and the arch supports full 85 passing of pt_regs to function tracing, then kprobes can 86 optimize on top of function tracing. 87 88config UPROBES 89 bool "Transparent user-space probes (EXPERIMENTAL)" 90 depends on UPROBE_EVENT && PERF_EVENTS 91 default n 92 select PERCPU_RWSEM 93 help 94 Uprobes is the user-space counterpart to kprobes: they 95 enable instrumentation applications (such as 'perf probe') 96 to establish unintrusive probes in user-space binaries and 97 libraries, by executing handler functions when the probes 98 are hit by user-space applications. 99 100 ( These probes come in the form of single-byte breakpoints, 101 managed by the kernel and kept transparent to the probed 102 application. ) 103 104 If in doubt, say "N". 105 106config HAVE_64BIT_ALIGNED_ACCESS 107 def_bool 64BIT && !HAVE_EFFICIENT_UNALIGNED_ACCESS 108 help 109 Some architectures require 64 bit accesses to be 64 bit 110 aligned, which also requires structs containing 64 bit values 111 to be 64 bit aligned too. This includes some 32 bit 112 architectures which can do 64 bit accesses, as well as 64 bit 113 architectures without unaligned access. 114 115 This symbol should be selected by an architecture if 64 bit 116 accesses are required to be 64 bit aligned in this way even 117 though it is not a 64 bit architecture. 118 119 See Documentation/unaligned-memory-access.txt for more 120 information on the topic of unaligned memory accesses. 121 122config HAVE_EFFICIENT_UNALIGNED_ACCESS 123 bool 124 help 125 Some architectures are unable to perform unaligned accesses 126 without the use of get_unaligned/put_unaligned. Others are 127 unable to perform such accesses efficiently (e.g. trap on 128 unaligned access and require fixing it up in the exception 129 handler.) 130 131 This symbol should be selected by an architecture if it can 132 perform unaligned accesses efficiently to allow different 133 code paths to be selected for these cases. Some network 134 drivers, for example, could opt to not fix up alignment 135 problems with received packets if doing so would not help 136 much. 137 138 See Documentation/unaligned-memory-access.txt for more 139 information on the topic of unaligned memory accesses. 140 141config ARCH_USE_BUILTIN_BSWAP 142 bool 143 help 144 Modern versions of GCC (since 4.4) have builtin functions 145 for handling byte-swapping. Using these, instead of the old 146 inline assembler that the architecture code provides in the 147 __arch_bswapXX() macros, allows the compiler to see what's 148 happening and offers more opportunity for optimisation. In 149 particular, the compiler will be able to combine the byteswap 150 with a nearby load or store and use load-and-swap or 151 store-and-swap instructions if the architecture has them. It 152 should almost *never* result in code which is worse than the 153 hand-coded assembler in <asm/swab.h>. But just in case it 154 does, the use of the builtins is optional. 155 156 Any architecture with load-and-swap or store-and-swap 157 instructions should set this. And it shouldn't hurt to set it 158 on architectures that don't have such instructions. 159 160config KRETPROBES 161 def_bool y 162 depends on KPROBES && HAVE_KRETPROBES 163 164config USER_RETURN_NOTIFIER 165 bool 166 depends on HAVE_USER_RETURN_NOTIFIER 167 help 168 Provide a kernel-internal notification when a cpu is about to 169 switch to user mode. 170 171config HAVE_IOREMAP_PROT 172 bool 173 174config HAVE_KPROBES 175 bool 176 177config HAVE_KRETPROBES 178 bool 179 180config HAVE_OPTPROBES 181 bool 182 183config HAVE_KPROBES_ON_FTRACE 184 bool 185 186config HAVE_NMI_WATCHDOG 187 bool 188# 189# An arch should select this if it provides all these things: 190# 191# task_pt_regs() in asm/processor.h or asm/ptrace.h 192# arch_has_single_step() if there is hardware single-step support 193# arch_has_block_step() if there is hardware block-step support 194# asm/syscall.h supplying asm-generic/syscall.h interface 195# linux/regset.h user_regset interfaces 196# CORE_DUMP_USE_REGSET #define'd in linux/elf.h 197# TIF_SYSCALL_TRACE calls tracehook_report_syscall_{entry,exit} 198# TIF_NOTIFY_RESUME calls tracehook_notify_resume() 199# signal delivery calls tracehook_signal_handler() 200# 201config HAVE_ARCH_TRACEHOOK 202 bool 203 204config HAVE_DMA_ATTRS 205 bool 206 207config HAVE_DMA_CONTIGUOUS 208 bool 209 210config USE_GENERIC_SMP_HELPERS 211 bool 212 213config GENERIC_SMP_IDLE_THREAD 214 bool 215 216config GENERIC_IDLE_POLL_SETUP 217 bool 218 219# Select if arch init_task initializer is different to init/init_task.c 220config ARCH_INIT_TASK 221 bool 222 223# Select if arch has its private alloc_task_struct() function 224config ARCH_TASK_STRUCT_ALLOCATOR 225 bool 226 227# Select if arch has its private alloc_thread_info() function 228config ARCH_THREAD_INFO_ALLOCATOR 229 bool 230 231config HAVE_REGS_AND_STACK_ACCESS_API 232 bool 233 help 234 This symbol should be selected by an architecure if it supports 235 the API needed to access registers and stack entries from pt_regs, 236 declared in asm/ptrace.h 237 For example the kprobes-based event tracer needs this API. 238 239config HAVE_CLK 240 bool 241 help 242 The <linux/clk.h> calls support software clock gating and 243 thus are a key power management tool on many systems. 244 245config HAVE_DMA_API_DEBUG 246 bool 247 248config HAVE_HW_BREAKPOINT 249 bool 250 depends on PERF_EVENTS 251 252config HAVE_MIXED_BREAKPOINTS_REGS 253 bool 254 depends on HAVE_HW_BREAKPOINT 255 help 256 Depending on the arch implementation of hardware breakpoints, 257 some of them have separate registers for data and instruction 258 breakpoints addresses, others have mixed registers to store 259 them but define the access type in a control register. 260 Select this option if your arch implements breakpoints under the 261 latter fashion. 262 263config HAVE_USER_RETURN_NOTIFIER 264 bool 265 266config HAVE_PERF_EVENTS_NMI 267 bool 268 help 269 System hardware can generate an NMI using the perf event 270 subsystem. Also has support for calculating CPU cycle events 271 to determine how many clock cycles in a given period. 272 273config HAVE_PERF_REGS 274 bool 275 help 276 Support selective register dumps for perf events. This includes 277 bit-mapping of each registers and a unique architecture id. 278 279config HAVE_PERF_USER_STACK_DUMP 280 bool 281 help 282 Support user stack dumps for perf event samples. This needs 283 access to the user stack pointer which is not unified across 284 architectures. 285 286config HAVE_ARCH_JUMP_LABEL 287 bool 288 289config HAVE_ARCH_MUTEX_CPU_RELAX 290 bool 291 292config HAVE_RCU_TABLE_FREE 293 bool 294 295config ARCH_HAVE_NMI_SAFE_CMPXCHG 296 bool 297 298config HAVE_ALIGNED_STRUCT_PAGE 299 bool 300 help 301 This makes sure that struct pages are double word aligned and that 302 e.g. the SLUB allocator can perform double word atomic operations 303 on a struct page for better performance. However selecting this 304 might increase the size of a struct page by a word. 305 306config HAVE_CMPXCHG_LOCAL 307 bool 308 309config HAVE_CMPXCHG_DOUBLE 310 bool 311 312config ARCH_WANT_IPC_PARSE_VERSION 313 bool 314 315config ARCH_WANT_COMPAT_IPC_PARSE_VERSION 316 bool 317 318config ARCH_WANT_OLD_COMPAT_IPC 319 select ARCH_WANT_COMPAT_IPC_PARSE_VERSION 320 bool 321 322config HAVE_ARCH_SECCOMP_FILTER 323 bool 324 help 325 An arch should select this symbol if it provides all of these things: 326 - syscall_get_arch() 327 - syscall_get_arguments() 328 - syscall_rollback() 329 - syscall_set_return_value() 330 - SIGSYS siginfo_t support 331 - secure_computing is called from a ptrace_event()-safe context 332 - secure_computing return value is checked and a return value of -1 333 results in the system call being skipped immediately. 334 335config SECCOMP_FILTER 336 def_bool y 337 depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET 338 help 339 Enable tasks to build secure computing environments defined 340 in terms of Berkeley Packet Filter programs which implement 341 task-defined system call filtering polices. 342 343 See Documentation/prctl/seccomp_filter.txt for details. 344 345config HAVE_CONTEXT_TRACKING 346 bool 347 help 348 Provide kernel/user boundaries probes necessary for subsystems 349 that need it, such as userspace RCU extended quiescent state. 350 Syscalls need to be wrapped inside user_exit()-user_enter() through 351 the slow path using TIF_NOHZ flag. Exceptions handlers must be 352 wrapped as well. Irqs are already protected inside 353 rcu_irq_enter/rcu_irq_exit() but preemption or signal handling on 354 irq exit still need to be protected. 355 356config HAVE_VIRT_CPU_ACCOUNTING 357 bool 358 359config HAVE_IRQ_TIME_ACCOUNTING 360 bool 361 help 362 Archs need to ensure they use a high enough resolution clock to 363 support irq time accounting and then call enable_sched_clock_irqtime(). 364 365config HAVE_ARCH_TRANSPARENT_HUGEPAGE 366 bool 367 368config HAVE_ARCH_SOFT_DIRTY 369 bool 370 371config HAVE_MOD_ARCH_SPECIFIC 372 bool 373 help 374 The arch uses struct mod_arch_specific to store data. Many arches 375 just need a simple module loader without arch specific data - those 376 should not enable this. 377 378config MODULES_USE_ELF_RELA 379 bool 380 help 381 Modules only use ELF RELA relocations. Modules with ELF REL 382 relocations will give an error. 383 384config MODULES_USE_ELF_REL 385 bool 386 help 387 Modules only use ELF REL relocations. Modules with ELF RELA 388 relocations will give an error. 389 390config HAVE_UNDERSCORE_SYMBOL_PREFIX 391 bool 392 help 393 Some architectures generate an _ in front of C symbols; things like 394 module loading and assembly files need to know about this. 395 396# 397# ABI hall of shame 398# 399config CLONE_BACKWARDS 400 bool 401 help 402 Architecture has tls passed as the 4th argument of clone(2), 403 not the 5th one. 404 405config CLONE_BACKWARDS2 406 bool 407 help 408 Architecture has the first two arguments of clone(2) swapped. 409 410config ODD_RT_SIGACTION 411 bool 412 help 413 Architecture has unusual rt_sigaction(2) arguments 414 415config OLD_SIGSUSPEND 416 bool 417 help 418 Architecture has old sigsuspend(2) syscall, of one-argument variety 419 420config OLD_SIGSUSPEND3 421 bool 422 help 423 Even weirder antique ABI - three-argument sigsuspend(2) 424 425config OLD_SIGACTION 426 bool 427 help 428 Architecture has old sigaction(2) syscall. Nope, not the same 429 as OLD_SIGSUSPEND | OLD_SIGSUSPEND3 - alpha has sigsuspend(2), 430 but fairly different variant of sigaction(2), thanks to OSF/1 431 compatibility... 432 433config COMPAT_OLD_SIGACTION 434 bool 435 436source "kernel/gcov/Kconfig" 437