1VERSION = 4 2PATCHLEVEL = 0 3SUBLEVEL = 0 4EXTRAVERSION = -rc3 5NAME = Hurr durr I'ma sheep 6 7# *DOCUMENTATION* 8# To see a list of typical targets execute "make help" 9# More info can be located in ./README 10# Comments in this file are targeted only to the developer, do not 11# expect to learn how to build the kernel reading this file. 12 13# Do not use make's built-in rules and variables 14# (this increases performance and avoids hard-to-debug behaviour); 15MAKEFLAGS += -rR 16 17# Avoid funny character set dependencies 18unexport LC_ALL 19LC_COLLATE=C 20LC_NUMERIC=C 21export LC_COLLATE LC_NUMERIC 22 23# Avoid interference with shell env settings 24unexport GREP_OPTIONS 25 26# We are using a recursive build, so we need to do a little thinking 27# to get the ordering right. 28# 29# Most importantly: sub-Makefiles should only ever modify files in 30# their own directory. If in some directory we have a dependency on 31# a file in another dir (which doesn't happen often, but it's often 32# unavoidable when linking the built-in.o targets which finally 33# turn into vmlinux), we will call a sub make in that other dir, and 34# after that we are sure that everything which is in that other dir 35# is now up to date. 36# 37# The only cases where we need to modify files which have global 38# effects are thus separated out and done before the recursive 39# descending is started. They are now explicitly listed as the 40# prepare rule. 41 42# Beautify output 43# --------------------------------------------------------------------------- 44# 45# Normally, we echo the whole command before executing it. By making 46# that echo $($(quiet)$(cmd)), we now have the possibility to set 47# $(quiet) to choose other forms of output instead, e.g. 48# 49# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ 50# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< 51# 52# If $(quiet) is empty, the whole command will be printed. 53# If it is set to "quiet_", only the short version will be printed. 54# If it is set to "silent_", nothing will be printed at all, since 55# the variable $(silent_cmd_cc_o_c) doesn't exist. 56# 57# A simple variant is to prefix commands with $(Q) - that's useful 58# for commands that shall be hidden in non-verbose mode. 59# 60# $(Q)ln $@ :< 61# 62# If KBUILD_VERBOSE equals 0 then the above command will be hidden. 63# If KBUILD_VERBOSE equals 1 then the above command is displayed. 64# 65# To put more focus on warnings, be less verbose as default 66# Use 'make V=1' to see the full commands 67 68ifeq ("$(origin V)", "command line") 69 KBUILD_VERBOSE = $(V) 70endif 71ifndef KBUILD_VERBOSE 72 KBUILD_VERBOSE = 0 73endif 74 75ifeq ($(KBUILD_VERBOSE),1) 76 quiet = 77 Q = 78else 79 quiet=quiet_ 80 Q = @ 81endif 82 83# If the user is running make -s (silent mode), suppress echoing of 84# commands 85 86ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 87ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) 88 quiet=silent_ 89endif 90else # make-3.8x 91ifneq ($(filter s% -s%,$(MAKEFLAGS)),) 92 quiet=silent_ 93endif 94endif 95 96export quiet Q KBUILD_VERBOSE 97 98# kbuild supports saving output files in a separate directory. 99# To locate output files in a separate directory two syntaxes are supported. 100# In both cases the working directory must be the root of the kernel src. 101# 1) O= 102# Use "make O=dir/to/store/output/files/" 103# 104# 2) Set KBUILD_OUTPUT 105# Set the environment variable KBUILD_OUTPUT to point to the directory 106# where the output files shall be placed. 107# export KBUILD_OUTPUT=dir/to/store/output/files/ 108# make 109# 110# The O= assignment takes precedence over the KBUILD_OUTPUT environment 111# variable. 112 113# KBUILD_SRC is set on invocation of make in OBJ directory 114# KBUILD_SRC is not intended to be used by the regular user (for now) 115ifeq ($(KBUILD_SRC),) 116 117# OK, Make called in directory where kernel src resides 118# Do we want to locate output files in a separate directory? 119ifeq ("$(origin O)", "command line") 120 KBUILD_OUTPUT := $(O) 121endif 122 123# That's our default target when none is given on the command line 124PHONY := _all 125_all: 126 127# Cancel implicit rules on top Makefile 128$(CURDIR)/Makefile Makefile: ; 129 130ifneq ($(KBUILD_OUTPUT),) 131# Invoke a second make in the output directory, passing relevant variables 132# check that the output directory actually exists 133saved-output := $(KBUILD_OUTPUT) 134KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \ 135 && /bin/pwd) 136$(if $(KBUILD_OUTPUT),, \ 137 $(error failed to create output directory "$(saved-output)")) 138 139PHONY += $(MAKECMDGOALS) sub-make 140 141$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make 142 @: 143 144sub-make: FORCE 145 $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ 146 -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) 147 148# Leave processing to above invocation of make 149skip-makefile := 1 150endif # ifneq ($(KBUILD_OUTPUT),) 151endif # ifeq ($(KBUILD_SRC),) 152 153# We process the rest of the Makefile if this is the final invocation of make 154ifeq ($(skip-makefile),) 155 156# Do not print "Entering directory ...", 157# but we want to display it when entering to the output directory 158# so that IDEs/editors are able to understand relative filenames. 159MAKEFLAGS += --no-print-directory 160 161# Call a source code checker (by default, "sparse") as part of the 162# C compilation. 163# 164# Use 'make C=1' to enable checking of only re-compiled files. 165# Use 'make C=2' to enable checking of *all* source files, regardless 166# of whether they are re-compiled or not. 167# 168# See the file "Documentation/sparse.txt" for more details, including 169# where to get the "sparse" utility. 170 171ifeq ("$(origin C)", "command line") 172 KBUILD_CHECKSRC = $(C) 173endif 174ifndef KBUILD_CHECKSRC 175 KBUILD_CHECKSRC = 0 176endif 177 178# Use make M=dir to specify directory of external module to build 179# Old syntax make ... SUBDIRS=$PWD is still supported 180# Setting the environment variable KBUILD_EXTMOD take precedence 181ifdef SUBDIRS 182 KBUILD_EXTMOD ?= $(SUBDIRS) 183endif 184 185ifeq ("$(origin M)", "command line") 186 KBUILD_EXTMOD := $(M) 187endif 188 189# If building an external module we do not care about the all: rule 190# but instead _all depend on modules 191PHONY += all 192ifeq ($(KBUILD_EXTMOD),) 193_all: all 194else 195_all: modules 196endif 197 198ifeq ($(KBUILD_SRC),) 199 # building in the source tree 200 srctree := . 201else 202 ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) 203 # building in a subdirectory of the source tree 204 srctree := .. 205 else 206 srctree := $(KBUILD_SRC) 207 endif 208endif 209objtree := . 210src := $(srctree) 211obj := $(objtree) 212 213VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) 214 215export srctree objtree VPATH 216 217 218# SUBARCH tells the usermode build what the underlying arch is. That is set 219# first, and if a usermode build is happening, the "ARCH=um" on the command 220# line overrides the setting of ARCH below. If a native build is happening, 221# then ARCH is assigned, getting whatever value it gets normally, and 222# SUBARCH is subsequently ignored. 223 224SUBARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ \ 225 -e s/sun4u/sparc64/ \ 226 -e s/arm.*/arm/ -e s/sa110/arm/ \ 227 -e s/s390x/s390/ -e s/parisc64/parisc/ \ 228 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ 229 -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ ) 230 231# Cross compiling and selecting different set of gcc/bin-utils 232# --------------------------------------------------------------------------- 233# 234# When performing cross compilation for other architectures ARCH shall be set 235# to the target architecture. (See arch/* for the possibilities). 236# ARCH can be set during invocation of make: 237# make ARCH=ia64 238# Another way is to have ARCH set in the environment. 239# The default ARCH is the host where make is executed. 240 241# CROSS_COMPILE specify the prefix used for all executables used 242# during compilation. Only gcc and related bin-utils executables 243# are prefixed with $(CROSS_COMPILE). 244# CROSS_COMPILE can be set on the command line 245# make CROSS_COMPILE=ia64-linux- 246# Alternatively CROSS_COMPILE can be set in the environment. 247# A third alternative is to store a setting in .config so that plain 248# "make" in the configured kernel build directory always uses that. 249# Default value for CROSS_COMPILE is not to prefix executables 250# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile 251ARCH ?= $(SUBARCH) 252CROSS_COMPILE ?= $(CONFIG_CROSS_COMPILE:"%"=%) 253 254# Architecture as present in compile.h 255UTS_MACHINE := $(ARCH) 256SRCARCH := $(ARCH) 257 258# Additional ARCH settings for x86 259ifeq ($(ARCH),i386) 260 SRCARCH := x86 261endif 262ifeq ($(ARCH),x86_64) 263 SRCARCH := x86 264endif 265 266# Additional ARCH settings for sparc 267ifeq ($(ARCH),sparc32) 268 SRCARCH := sparc 269endif 270ifeq ($(ARCH),sparc64) 271 SRCARCH := sparc 272endif 273 274# Additional ARCH settings for sh 275ifeq ($(ARCH),sh64) 276 SRCARCH := sh 277endif 278 279# Additional ARCH settings for tile 280ifeq ($(ARCH),tilepro) 281 SRCARCH := tile 282endif 283ifeq ($(ARCH),tilegx) 284 SRCARCH := tile 285endif 286 287# Where to locate arch specific headers 288hdr-arch := $(SRCARCH) 289 290KCONFIG_CONFIG ?= .config 291export KCONFIG_CONFIG 292 293# SHELL used by kbuild 294CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ 295 else if [ -x /bin/bash ]; then echo /bin/bash; \ 296 else echo sh; fi ; fi) 297 298HOSTCC = gcc 299HOSTCXX = g++ 300HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89 301HOSTCXXFLAGS = -O2 302 303ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1) 304HOSTCFLAGS += -Wno-unused-value -Wno-unused-parameter \ 305 -Wno-missing-field-initializers -fno-delete-null-pointer-checks 306endif 307 308# Decide whether to build built-in, modular, or both. 309# Normally, just do built-in. 310 311KBUILD_MODULES := 312KBUILD_BUILTIN := 1 313 314# If we have only "make modules", don't compile built-in objects. 315# When we're building modules with modversions, we need to consider 316# the built-in objects during the descend as well, in order to 317# make sure the checksums are up to date before we record them. 318 319ifeq ($(MAKECMDGOALS),modules) 320 KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) 321endif 322 323# If we have "make <whatever> modules", compile modules 324# in addition to whatever we do anyway. 325# Just "make" or "make all" shall build modules as well 326 327ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) 328 KBUILD_MODULES := 1 329endif 330 331ifeq ($(MAKECMDGOALS),) 332 KBUILD_MODULES := 1 333endif 334 335export KBUILD_MODULES KBUILD_BUILTIN 336export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD 337 338ifneq ($(CC),) 339ifeq ($(shell $(CC) -v 2>&1 | grep -c "clang version"), 1) 340COMPILER := clang 341else 342COMPILER := gcc 343endif 344export COMPILER 345endif 346 347# Look for make include files relative to root of kernel src 348MAKEFLAGS += --include-dir=$(srctree) 349 350# We need some generic definitions (do not try to remake the file). 351$(srctree)/scripts/Kbuild.include: ; 352include $(srctree)/scripts/Kbuild.include 353 354# Make variables (CC, etc...) 355AS = $(CROSS_COMPILE)as 356LD = $(CROSS_COMPILE)ld 357CC = $(CROSS_COMPILE)gcc 358CPP = $(CC) -E 359AR = $(CROSS_COMPILE)ar 360NM = $(CROSS_COMPILE)nm 361STRIP = $(CROSS_COMPILE)strip 362OBJCOPY = $(CROSS_COMPILE)objcopy 363OBJDUMP = $(CROSS_COMPILE)objdump 364AWK = awk 365GENKSYMS = scripts/genksyms/genksyms 366INSTALLKERNEL := installkernel 367DEPMOD = /sbin/depmod 368PERL = perl 369PYTHON = python 370CHECK = sparse 371 372CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ 373 -Wbitwise -Wno-return-void $(CF) 374CFLAGS_MODULE = 375AFLAGS_MODULE = 376LDFLAGS_MODULE = 377CFLAGS_KERNEL = 378AFLAGS_KERNEL = 379CFLAGS_GCOV = -fprofile-arcs -ftest-coverage 380 381 382# Use USERINCLUDE when you must reference the UAPI directories only. 383USERINCLUDE := \ 384 -I$(srctree)/arch/$(hdr-arch)/include/uapi \ 385 -Iarch/$(hdr-arch)/include/generated/uapi \ 386 -I$(srctree)/include/uapi \ 387 -Iinclude/generated/uapi \ 388 -include $(srctree)/include/linux/kconfig.h 389 390# Use LINUXINCLUDE when you must reference the include/ directory. 391# Needed to be compatible with the O= option 392LINUXINCLUDE := \ 393 -I$(srctree)/arch/$(hdr-arch)/include \ 394 -Iarch/$(hdr-arch)/include/generated/uapi \ 395 -Iarch/$(hdr-arch)/include/generated \ 396 $(if $(KBUILD_SRC), -I$(srctree)/include) \ 397 -Iinclude \ 398 $(USERINCLUDE) 399 400KBUILD_CPPFLAGS := -D__KERNEL__ 401 402KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ 403 -fno-strict-aliasing -fno-common \ 404 -Werror-implicit-function-declaration \ 405 -Wno-format-security \ 406 -std=gnu89 407 408KBUILD_AFLAGS_KERNEL := 409KBUILD_CFLAGS_KERNEL := 410KBUILD_AFLAGS := -D__ASSEMBLY__ 411KBUILD_AFLAGS_MODULE := -DMODULE 412KBUILD_CFLAGS_MODULE := -DMODULE 413KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds 414 415# Read KERNELRELEASE from include/config/kernel.release (if it exists) 416KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) 417KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) 418 419export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION 420export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC 421export CPP AR NM STRIP OBJCOPY OBJDUMP 422export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE 423export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS 424 425export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS 426export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV CFLAGS_KASAN 427export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE 428export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE 429export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL 430export KBUILD_ARFLAGS 431 432# When compiling out-of-tree modules, put MODVERDIR in the module 433# tree rather than in the kernel tree. The kernel tree might 434# even be read-only. 435export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions 436 437# Files to ignore in find ... statements 438 439export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \ 440 -name CVS -o -name .pc -o -name .hg -o -name .git \) \ 441 -prune -o 442export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \ 443 --exclude CVS --exclude .pc --exclude .hg --exclude .git 444 445# =========================================================================== 446# Rules shared between *config targets and build targets 447 448# Basic helpers built in scripts/ 449PHONY += scripts_basic 450scripts_basic: 451 $(Q)$(MAKE) $(build)=scripts/basic 452 $(Q)rm -f .tmp_quiet_recordmcount 453 454# To avoid any implicit rule to kick in, define an empty command. 455scripts/basic/%: scripts_basic ; 456 457PHONY += outputmakefile 458# outputmakefile generates a Makefile in the output directory, if using a 459# separate output directory. This allows convenient use of make in the 460# output directory. 461outputmakefile: 462ifneq ($(KBUILD_SRC),) 463 $(Q)ln -fsn $(srctree) source 464 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \ 465 $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) 466endif 467 468# Support for using generic headers in asm-generic 469PHONY += asm-generic 470asm-generic: 471 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ 472 src=asm obj=arch/$(SRCARCH)/include/generated/asm 473 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \ 474 src=uapi/asm obj=arch/$(SRCARCH)/include/generated/uapi/asm 475 476# To make sure we do not include .config for any of the *config targets 477# catch them early, and hand them over to scripts/kconfig/Makefile 478# It is allowed to specify more targets when calling make, including 479# mixing *config targets and build targets. 480# For example 'make oldconfig all'. 481# Detect when mixed targets is specified, and make a second invocation 482# of make so .config is not included in this case either (for *config). 483 484version_h := include/generated/uapi/linux/version.h 485old_version_h := include/linux/version.h 486 487no-dot-config-targets := clean mrproper distclean \ 488 cscope gtags TAGS tags help% %docs check% coccicheck \ 489 $(version_h) headers_% archheaders archscripts \ 490 kernelversion %src-pkg 491 492config-targets := 0 493mixed-targets := 0 494dot-config := 1 495 496ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),) 497 ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),) 498 dot-config := 0 499 endif 500endif 501 502ifeq ($(KBUILD_EXTMOD),) 503 ifneq ($(filter config %config,$(MAKECMDGOALS)),) 504 config-targets := 1 505 ifneq ($(words $(MAKECMDGOALS)),1) 506 mixed-targets := 1 507 endif 508 endif 509endif 510 511ifeq ($(mixed-targets),1) 512# =========================================================================== 513# We're called with mixed targets (*config and build targets). 514# Handle them one by one. 515 516PHONY += $(MAKECMDGOALS) __build_one_by_one 517 518$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one 519 @: 520 521__build_one_by_one: 522 $(Q)set -e; \ 523 for i in $(MAKECMDGOALS); do \ 524 $(MAKE) -f $(srctree)/Makefile $$i; \ 525 done 526 527else 528ifeq ($(config-targets),1) 529# =========================================================================== 530# *config targets only - make sure prerequisites are updated, and descend 531# in scripts/kconfig to make the *config target 532 533# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. 534# KBUILD_DEFCONFIG may point out an alternative default configuration 535# used for 'make defconfig' 536include $(srctree)/arch/$(SRCARCH)/Makefile 537export KBUILD_DEFCONFIG KBUILD_KCONFIG 538 539config: scripts_basic outputmakefile FORCE 540 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 541 542%config: scripts_basic outputmakefile FORCE 543 $(Q)$(MAKE) $(build)=scripts/kconfig $@ 544 545else 546# =========================================================================== 547# Build targets only - this includes vmlinux, arch specific targets, clean 548# targets and others. In general all targets except *config targets. 549 550ifeq ($(KBUILD_EXTMOD),) 551# Additional helpers built in scripts/ 552# Carefully list dependencies so we do not try to build scripts twice 553# in parallel 554PHONY += scripts 555scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \ 556 asm-generic 557 $(Q)$(MAKE) $(build)=$(@) 558 559# Objects we will link into vmlinux / subdirs we need to visit 560init-y := init/ 561drivers-y := drivers/ sound/ firmware/ 562net-y := net/ 563libs-y := lib/ 564core-y := usr/ 565endif # KBUILD_EXTMOD 566 567ifeq ($(dot-config),1) 568# Read in config 569-include include/config/auto.conf 570 571ifeq ($(KBUILD_EXTMOD),) 572# Read in dependencies to all Kconfig* files, make sure to run 573# oldconfig if changes are detected. 574-include include/config/auto.conf.cmd 575 576# To avoid any implicit rule to kick in, define an empty command 577$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; 578 579# If .config is newer than include/config/auto.conf, someone tinkered 580# with it and forgot to run make oldconfig. 581# if auto.conf.cmd is missing then we are probably in a cleaned tree so 582# we execute the config step to be sure to catch updated Kconfig files 583include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd 584 $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig 585else 586# external modules needs include/generated/autoconf.h and include/config/auto.conf 587# but do not care if they are up-to-date. Use auto.conf to trigger the test 588PHONY += include/config/auto.conf 589 590include/config/auto.conf: 591 $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ 592 echo >&2; \ 593 echo >&2 " ERROR: Kernel configuration is invalid."; \ 594 echo >&2 " include/generated/autoconf.h or $@ are missing.";\ 595 echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ 596 echo >&2 ; \ 597 /bin/false) 598 599endif # KBUILD_EXTMOD 600 601else 602# Dummy target needed, because used as prerequisite 603include/config/auto.conf: ; 604endif # $(dot-config) 605 606# The all: target is the default when no target is given on the 607# command line. 608# This allow a user to issue only 'make' to build a kernel including modules 609# Defaults to vmlinux, but the arch makefile usually adds further targets 610all: vmlinux 611 612include $(srctree)/arch/$(SRCARCH)/Makefile 613 614KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) 615 616ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE 617KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,) 618else 619KBUILD_CFLAGS += -O2 620endif 621 622# Tell gcc to never replace conditional load with a non-conditional one 623KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) 624 625ifdef CONFIG_READABLE_ASM 626# Disable optimizations that make assembler listings hard to read. 627# reorder blocks reorders the control in the function 628# ipa clone creates specialized cloned functions 629# partial inlining inlines only parts of functions 630KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \ 631 $(call cc-option,-fno-ipa-cp-clone,) \ 632 $(call cc-option,-fno-partial-inlining) 633endif 634 635ifneq ($(CONFIG_FRAME_WARN),0) 636KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) 637endif 638 639# Handle stack protector mode. 640# 641# Since kbuild can potentially perform two passes (first with the old 642# .config values and then with updated .config values), we cannot error out 643# if a desired compiler option is unsupported. If we were to error, kbuild 644# could never get to the second pass and actually notice that we changed 645# the option to something that was supported. 646# 647# Additionally, we don't want to fallback and/or silently change which compiler 648# flags will be used, since that leads to producing kernels with different 649# security feature characteristics depending on the compiler used. ("But I 650# selected CC_STACKPROTECTOR_STRONG! Why did it build with _REGULAR?!") 651# 652# The middle ground is to warn here so that the failed option is obvious, but 653# to let the build fail with bad compiler flags so that we can't produce a 654# kernel when there is a CONFIG and compiler mismatch. 655# 656ifdef CONFIG_CC_STACKPROTECTOR_REGULAR 657 stackp-flag := -fstack-protector 658 ifeq ($(call cc-option, $(stackp-flag)),) 659 $(warning Cannot use CONFIG_CC_STACKPROTECTOR_REGULAR: \ 660 -fstack-protector not supported by compiler) 661 endif 662else 663ifdef CONFIG_CC_STACKPROTECTOR_STRONG 664 stackp-flag := -fstack-protector-strong 665 ifeq ($(call cc-option, $(stackp-flag)),) 666 $(warning Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: \ 667 -fstack-protector-strong not supported by compiler) 668 endif 669else 670 # Force off for distro compilers that enable stack protector by default. 671 stackp-flag := $(call cc-option, -fno-stack-protector) 672endif 673endif 674KBUILD_CFLAGS += $(stackp-flag) 675 676ifeq ($(COMPILER),clang) 677KBUILD_CPPFLAGS += $(call cc-option,-Qunused-arguments,) 678KBUILD_CPPFLAGS += $(call cc-option,-Wno-unknown-warning-option,) 679KBUILD_CFLAGS += $(call cc-disable-warning, unused-variable) 680KBUILD_CFLAGS += $(call cc-disable-warning, format-invalid-specifier) 681KBUILD_CFLAGS += $(call cc-disable-warning, gnu) 682# Quiet clang warning: comparison of unsigned expression < 0 is always false 683KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare) 684# CLANG uses a _MergedGlobals as optimization, but this breaks modpost, as the 685# source of a reference will be _MergedGlobals and not on of the whitelisted names. 686# See modpost pattern 2 687KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,) 688KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior) 689else 690 691# This warning generated too much noise in a regular build. 692# Use make W=1 to enable this warning (see scripts/Makefile.build) 693KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable) 694endif 695 696ifdef CONFIG_FRAME_POINTER 697KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls 698else 699# Some targets (ARM with Thumb2, for example), can't be built with frame 700# pointers. For those, we don't have FUNCTION_TRACER automatically 701# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is 702# incompatible with -fomit-frame-pointer with current GCC, so we don't use 703# -fomit-frame-pointer with FUNCTION_TRACER. 704ifndef CONFIG_FUNCTION_TRACER 705KBUILD_CFLAGS += -fomit-frame-pointer 706endif 707endif 708 709KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments) 710 711ifdef CONFIG_DEBUG_INFO 712ifdef CONFIG_DEBUG_INFO_SPLIT 713KBUILD_CFLAGS += $(call cc-option, -gsplit-dwarf, -g) 714else 715KBUILD_CFLAGS += -g 716endif 717KBUILD_AFLAGS += -Wa,-gdwarf-2 718endif 719ifdef CONFIG_DEBUG_INFO_DWARF4 720KBUILD_CFLAGS += $(call cc-option, -gdwarf-4,) 721endif 722 723ifdef CONFIG_DEBUG_INFO_REDUCED 724KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \ 725 $(call cc-option,-fno-var-tracking) 726endif 727 728ifdef CONFIG_FUNCTION_TRACER 729ifndef CC_FLAGS_FTRACE 730CC_FLAGS_FTRACE := -pg 731endif 732export CC_FLAGS_FTRACE 733ifdef CONFIG_HAVE_FENTRY 734CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY) 735endif 736KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_USING_FENTRY) 737KBUILD_AFLAGS += $(CC_USING_FENTRY) 738ifdef CONFIG_DYNAMIC_FTRACE 739 ifdef CONFIG_HAVE_C_RECORDMCOUNT 740 BUILD_C_RECORDMCOUNT := y 741 export BUILD_C_RECORDMCOUNT 742 endif 743endif 744endif 745 746# We trigger additional mismatches with less inlining 747ifdef CONFIG_DEBUG_SECTION_MISMATCH 748KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once) 749endif 750 751# arch Makefile may override CC so keep this after arch Makefile is included 752NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) 753CHECKFLAGS += $(NOSTDINC_FLAGS) 754 755# warn about C99 declaration after statement 756KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,) 757 758# disable pointer signed / unsigned warnings in gcc 4.0 759KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign) 760 761# disable invalid "can't wrap" optimizations for signed / pointers 762KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow) 763 764# conserve stack if available 765KBUILD_CFLAGS += $(call cc-option,-fconserve-stack) 766 767# disallow errors like 'EXPORT_GPL(foo);' with missing header 768KBUILD_CFLAGS += $(call cc-option,-Werror=implicit-int) 769 770# require functions to have arguments in prototypes, not empty 'int foo()' 771KBUILD_CFLAGS += $(call cc-option,-Werror=strict-prototypes) 772 773# Prohibit date/time macros, which would make the build non-deterministic 774KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) 775 776# use the deterministic mode of AR if available 777KBUILD_ARFLAGS := $(call ar-option,D) 778 779# check for 'asm goto' 780ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y) 781 KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO 782endif 783 784include $(srctree)/scripts/Makefile.kasan 785include $(srctree)/scripts/Makefile.extrawarn 786 787# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments 788KBUILD_CPPFLAGS += $(KCPPFLAGS) 789KBUILD_AFLAGS += $(KAFLAGS) 790KBUILD_CFLAGS += $(KCFLAGS) 791 792# Use --build-id when available. 793LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\ 794 $(call cc-ldoption, -Wl$(comma)--build-id,)) 795KBUILD_LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID) 796LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID) 797 798ifeq ($(CONFIG_STRIP_ASM_SYMS),y) 799LDFLAGS_vmlinux += $(call ld-option, -X,) 800endif 801 802# Default kernel image to build when no specific target is given. 803# KBUILD_IMAGE may be overruled on the command line or 804# set in the environment 805# Also any assignments in arch/$(ARCH)/Makefile take precedence over 806# this default value 807export KBUILD_IMAGE ?= vmlinux 808 809# 810# INSTALL_PATH specifies where to place the updated kernel and system map 811# images. Default is /boot, but you can set it to other values 812export INSTALL_PATH ?= /boot 813 814# 815# INSTALL_DTBS_PATH specifies a prefix for relocations required by build roots. 816# Like INSTALL_MOD_PATH, it isn't defined in the Makefile, but can be passed as 817# an argument if needed. Otherwise it defaults to the kernel install path 818# 819export INSTALL_DTBS_PATH ?= $(INSTALL_PATH)/dtbs/$(KERNELRELEASE) 820 821# 822# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory 823# relocations required by build roots. This is not defined in the 824# makefile but the argument can be passed to make if needed. 825# 826 827MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) 828export MODLIB 829 830# 831# INSTALL_MOD_STRIP, if defined, will cause modules to be 832# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then 833# the default option --strip-debug will be used. Otherwise, 834# INSTALL_MOD_STRIP value will be used as the options to the strip command. 835 836ifdef INSTALL_MOD_STRIP 837ifeq ($(INSTALL_MOD_STRIP),1) 838mod_strip_cmd = $(STRIP) --strip-debug 839else 840mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP) 841endif # INSTALL_MOD_STRIP=1 842else 843mod_strip_cmd = true 844endif # INSTALL_MOD_STRIP 845export mod_strip_cmd 846 847# CONFIG_MODULE_COMPRESS, if defined, will cause module to be compressed 848# after they are installed in agreement with CONFIG_MODULE_COMPRESS_GZIP 849# or CONFIG_MODULE_COMPRESS_XZ. 850 851mod_compress_cmd = true 852ifdef CONFIG_MODULE_COMPRESS 853 ifdef CONFIG_MODULE_COMPRESS_GZIP 854 mod_compress_cmd = gzip -n 855 endif # CONFIG_MODULE_COMPRESS_GZIP 856 ifdef CONFIG_MODULE_COMPRESS_XZ 857 mod_compress_cmd = xz 858 endif # CONFIG_MODULE_COMPRESS_XZ 859endif # CONFIG_MODULE_COMPRESS 860export mod_compress_cmd 861 862# Select initial ramdisk compression format, default is gzip(1). 863# This shall be used by the dracut(8) tool while creating an initramfs image. 864# 865INITRD_COMPRESS-y := gzip 866INITRD_COMPRESS-$(CONFIG_RD_BZIP2) := bzip2 867INITRD_COMPRESS-$(CONFIG_RD_LZMA) := lzma 868INITRD_COMPRESS-$(CONFIG_RD_XZ) := xz 869INITRD_COMPRESS-$(CONFIG_RD_LZO) := lzo 870INITRD_COMPRESS-$(CONFIG_RD_LZ4) := lz4 871# do not export INITRD_COMPRESS, since we didn't actually 872# choose a sane default compression above. 873# export INITRD_COMPRESS := $(INITRD_COMPRESS-y) 874 875ifdef CONFIG_MODULE_SIG_ALL 876MODSECKEY = ./signing_key.priv 877MODPUBKEY = ./signing_key.x509 878export MODPUBKEY 879mod_sign_cmd = perl $(srctree)/scripts/sign-file $(CONFIG_MODULE_SIG_HASH) $(MODSECKEY) $(MODPUBKEY) 880else 881mod_sign_cmd = true 882endif 883export mod_sign_cmd 884 885 886ifeq ($(KBUILD_EXTMOD),) 887core-y += kernel/ mm/ fs/ ipc/ security/ crypto/ block/ 888 889vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \ 890 $(core-y) $(core-m) $(drivers-y) $(drivers-m) \ 891 $(net-y) $(net-m) $(libs-y) $(libs-m))) 892 893vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \ 894 $(init-) $(core-) $(drivers-) $(net-) $(libs-)))) 895 896init-y := $(patsubst %/, %/built-in.o, $(init-y)) 897core-y := $(patsubst %/, %/built-in.o, $(core-y)) 898drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y)) 899net-y := $(patsubst %/, %/built-in.o, $(net-y)) 900libs-y1 := $(patsubst %/, %/lib.a, $(libs-y)) 901libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y)) 902libs-y := $(libs-y1) $(libs-y2) 903 904# Externally visible symbols (used by link-vmlinux.sh) 905export KBUILD_VMLINUX_INIT := $(head-y) $(init-y) 906export KBUILD_VMLINUX_MAIN := $(core-y) $(libs-y) $(drivers-y) $(net-y) 907export KBUILD_LDS := arch/$(SRCARCH)/kernel/vmlinux.lds 908export LDFLAGS_vmlinux 909# used by scripts/pacmage/Makefile 910export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) arch Documentation include samples scripts tools virt) 911 912vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_INIT) $(KBUILD_VMLINUX_MAIN) 913 914# Final link of vmlinux 915 cmd_link-vmlinux = $(CONFIG_SHELL) $< $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) 916quiet_cmd_link-vmlinux = LINK $@ 917 918# Include targets which we want to 919# execute if the rest of the kernel build went well. 920vmlinux: scripts/link-vmlinux.sh $(vmlinux-deps) FORCE 921ifdef CONFIG_HEADERS_CHECK 922 $(Q)$(MAKE) -f $(srctree)/Makefile headers_check 923endif 924ifdef CONFIG_SAMPLES 925 $(Q)$(MAKE) $(build)=samples 926endif 927ifdef CONFIG_BUILD_DOCSRC 928 $(Q)$(MAKE) $(build)=Documentation 929endif 930ifdef CONFIG_GDB_SCRIPTS 931 $(Q)ln -fsn `cd $(srctree) && /bin/pwd`/scripts/gdb/vmlinux-gdb.py 932endif 933 +$(call if_changed,link-vmlinux) 934 935# The actual objects are generated when descending, 936# make sure no implicit rule kicks in 937$(sort $(vmlinux-deps)): $(vmlinux-dirs) ; 938 939# Handle descending into subdirectories listed in $(vmlinux-dirs) 940# Preset locale variables to speed up the build process. Limit locale 941# tweaks to this spot to avoid wrong language settings when running 942# make menuconfig etc. 943# Error messages still appears in the original language 944 945PHONY += $(vmlinux-dirs) 946$(vmlinux-dirs): prepare scripts 947 $(Q)$(MAKE) $(build)=$@ 948 949define filechk_kernel.release 950 echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 951endef 952 953# Store (new) KERNELRELEASE string in include/config/kernel.release 954include/config/kernel.release: include/config/auto.conf FORCE 955 $(call filechk,kernel.release) 956 957 958# Things we need to do before we recursively start building the kernel 959# or the modules are listed in "prepare". 960# A multi level approach is used. prepareN is processed before prepareN-1. 961# archprepare is used in arch Makefiles and when processed asm symlink, 962# version.h and scripts_basic is processed / created. 963 964# Listed in dependency order 965PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 966 967# prepare3 is used to check if we are building in a separate output directory, 968# and if so do: 969# 1) Check that make has not been executed in the kernel src $(srctree) 970prepare3: include/config/kernel.release 971ifneq ($(KBUILD_SRC),) 972 @$(kecho) ' Using $(srctree) as source for kernel' 973 $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ 974 echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \ 975 echo >&2 " in the '$(srctree)' directory.";\ 976 /bin/false; \ 977 fi; 978endif 979 980# prepare2 creates a makefile if using a separate output directory 981prepare2: prepare3 outputmakefile asm-generic 982 983prepare1: prepare2 $(version_h) include/generated/utsrelease.h \ 984 include/config/auto.conf 985 $(cmd_crmodverdir) 986 987archprepare: archheaders archscripts prepare1 scripts_basic 988 989prepare0: archprepare FORCE 990 $(Q)$(MAKE) $(build)=. 991 992# All the preparing.. 993prepare: prepare0 994 995# Generate some files 996# --------------------------------------------------------------------------- 997 998# KERNELRELEASE can change from a few different places, meaning version.h 999# needs to be updated, so this check is forced on all builds 1000 1001uts_len := 64 1002define filechk_utsrelease.h 1003 if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \ 1004 echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \ 1005 exit 1; \ 1006 fi; \ 1007 (echo \#define UTS_RELEASE \"$(KERNELRELEASE)\";) 1008endef 1009 1010define filechk_version.h 1011 (echo \#define LINUX_VERSION_CODE $(shell \ 1012 expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \ 1013 echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) 1014endef 1015 1016$(version_h): $(srctree)/Makefile FORCE 1017 $(call filechk,version.h) 1018 $(Q)rm -f $(old_version_h) 1019 1020include/generated/utsrelease.h: include/config/kernel.release FORCE 1021 $(call filechk,utsrelease.h) 1022 1023PHONY += headerdep 1024headerdep: 1025 $(Q)find $(srctree)/include/ -name '*.h' | xargs --max-args 1 \ 1026 $(srctree)/scripts/headerdep.pl -I$(srctree)/include 1027 1028# --------------------------------------------------------------------------- 1029 1030PHONY += depend dep 1031depend dep: 1032 @echo '*** Warning: make $@ is unnecessary now.' 1033 1034# --------------------------------------------------------------------------- 1035# Firmware install 1036INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware 1037export INSTALL_FW_PATH 1038 1039PHONY += firmware_install 1040firmware_install: FORCE 1041 @mkdir -p $(objtree)/firmware 1042 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install 1043 1044# --------------------------------------------------------------------------- 1045# Kernel headers 1046 1047#Default location for installed headers 1048export INSTALL_HDR_PATH = $(objtree)/usr 1049 1050# If we do an all arch process set dst to asm-$(hdr-arch) 1051hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm) 1052 1053PHONY += archheaders 1054archheaders: 1055 1056PHONY += archscripts 1057archscripts: 1058 1059PHONY += __headers 1060__headers: $(version_h) scripts_basic asm-generic archheaders archscripts FORCE 1061 $(Q)$(MAKE) $(build)=scripts build_unifdef 1062 1063PHONY += headers_install_all 1064headers_install_all: 1065 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh install 1066 1067PHONY += headers_install 1068headers_install: __headers 1069 $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \ 1070 $(error Headers not exportable for the $(SRCARCH) architecture)) 1071 $(Q)$(MAKE) $(hdr-inst)=include/uapi 1072 $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) 1073 1074PHONY += headers_check_all 1075headers_check_all: headers_install_all 1076 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/headers.sh check 1077 1078PHONY += headers_check 1079headers_check: headers_install 1080 $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1 1081 $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1 1082 1083# --------------------------------------------------------------------------- 1084# Kernel selftest 1085 1086PHONY += kselftest 1087kselftest: 1088 $(Q)$(MAKE) -C tools/testing/selftests run_tests 1089 1090# --------------------------------------------------------------------------- 1091# Modules 1092 1093ifdef CONFIG_MODULES 1094 1095# By default, build modules as well 1096 1097all: modules 1098 1099# Build modules 1100# 1101# A module can be listed more than once in obj-m resulting in 1102# duplicate lines in modules.order files. Those are removed 1103# using awk while concatenating to the final file. 1104 1105PHONY += modules 1106modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin 1107 $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order 1108 @$(kecho) ' Building modules, stage 2.'; 1109 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1110 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild 1111 1112modules.builtin: $(vmlinux-dirs:%=%/modules.builtin) 1113 $(Q)$(AWK) '!x[$$0]++' $^ > $(objtree)/modules.builtin 1114 1115%/modules.builtin: include/config/auto.conf 1116 $(Q)$(MAKE) $(modbuiltin)=$* 1117 1118 1119# Target to prepare building external modules 1120PHONY += modules_prepare 1121modules_prepare: prepare scripts 1122 1123# Target to install modules 1124PHONY += modules_install 1125modules_install: _modinst_ _modinst_post 1126 1127PHONY += _modinst_ 1128_modinst_: 1129 @rm -rf $(MODLIB)/kernel 1130 @rm -f $(MODLIB)/source 1131 @mkdir -p $(MODLIB)/kernel 1132 @ln -s `cd $(srctree) && /bin/pwd` $(MODLIB)/source 1133 @if [ ! $(objtree) -ef $(MODLIB)/build ]; then \ 1134 rm -f $(MODLIB)/build ; \ 1135 ln -s $(CURDIR) $(MODLIB)/build ; \ 1136 fi 1137 @cp -f $(objtree)/modules.order $(MODLIB)/ 1138 @cp -f $(objtree)/modules.builtin $(MODLIB)/ 1139 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst 1140 1141# This depmod is only for convenience to give the initial 1142# boot a modules.dep even before / is mounted read-write. However the 1143# boot script depmod is the master version. 1144PHONY += _modinst_post 1145_modinst_post: _modinst_ 1146 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst 1147 $(call cmd,depmod) 1148 1149ifeq ($(CONFIG_MODULE_SIG), y) 1150PHONY += modules_sign 1151modules_sign: 1152 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modsign 1153endif 1154 1155else # CONFIG_MODULES 1156 1157# Modules not configured 1158# --------------------------------------------------------------------------- 1159 1160modules modules_install: FORCE 1161 @echo >&2 1162 @echo >&2 "The present kernel configuration has modules disabled." 1163 @echo >&2 "Type 'make config' and enable loadable module support." 1164 @echo >&2 "Then build a kernel with module support enabled." 1165 @echo >&2 1166 @exit 1 1167 1168endif # CONFIG_MODULES 1169 1170### 1171# Cleaning is done on three levels. 1172# make clean Delete most generated files 1173# Leave enough to build external modules 1174# make mrproper Delete the current configuration, and all generated files 1175# make distclean Remove editor backup files, patch leftover files and the like 1176 1177# Directories & files removed with 'make clean' 1178CLEAN_DIRS += $(MODVERDIR) 1179 1180# Directories & files removed with 'make mrproper' 1181MRPROPER_DIRS += include/config usr/include include/generated \ 1182 arch/*/include/generated .tmp_objdiff 1183MRPROPER_FILES += .config .config.old .version .old_version \ 1184 Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \ 1185 signing_key.priv signing_key.x509 x509.genkey \ 1186 extra_certificates signing_key.x509.keyid \ 1187 signing_key.x509.signer vmlinux-gdb.py 1188 1189# clean - Delete most, but leave enough to build external modules 1190# 1191clean: rm-dirs := $(CLEAN_DIRS) 1192clean: rm-files := $(CLEAN_FILES) 1193clean-dirs := $(addprefix _clean_, . $(vmlinux-alldirs) Documentation samples) 1194 1195PHONY += $(clean-dirs) clean archclean vmlinuxclean 1196$(clean-dirs): 1197 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1198 1199vmlinuxclean: 1200 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/link-vmlinux.sh clean 1201 1202clean: archclean vmlinuxclean 1203 1204# mrproper - Delete all generated files, including .config 1205# 1206mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) 1207mrproper: rm-files := $(wildcard $(MRPROPER_FILES)) 1208mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts) 1209 1210PHONY += $(mrproper-dirs) mrproper archmrproper 1211$(mrproper-dirs): 1212 $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) 1213 1214mrproper: clean archmrproper $(mrproper-dirs) 1215 $(call cmd,rmdirs) 1216 $(call cmd,rmfiles) 1217 1218# distclean 1219# 1220PHONY += distclean 1221 1222distclean: mrproper 1223 @find $(srctree) $(RCS_FIND_IGNORE) \ 1224 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \ 1225 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \ 1226 -o -name '.*.rej' -o -name '*%' -o -name 'core' \) \ 1227 -type f -print | xargs rm -f 1228 1229 1230# Packaging of the kernel to various formats 1231# --------------------------------------------------------------------------- 1232# rpm target kept for backward compatibility 1233package-dir := scripts/package 1234 1235%src-pkg: FORCE 1236 $(Q)$(MAKE) $(build)=$(package-dir) $@ 1237%pkg: include/config/kernel.release FORCE 1238 $(Q)$(MAKE) $(build)=$(package-dir) $@ 1239rpm: include/config/kernel.release FORCE 1240 $(Q)$(MAKE) $(build)=$(package-dir) $@ 1241 1242 1243# Brief documentation of the typical targets used 1244# --------------------------------------------------------------------------- 1245 1246boards := $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*_defconfig) 1247boards := $(sort $(notdir $(boards))) 1248board-dirs := $(dir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/*/*_defconfig)) 1249board-dirs := $(sort $(notdir $(board-dirs:/=))) 1250 1251help: 1252 @echo 'Cleaning targets:' 1253 @echo ' clean - Remove most generated files but keep the config and' 1254 @echo ' enough build support to build external modules' 1255 @echo ' mrproper - Remove all generated files + config + various backup files' 1256 @echo ' distclean - mrproper + remove editor backup and patch files' 1257 @echo '' 1258 @echo 'Configuration targets:' 1259 @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help 1260 @echo '' 1261 @echo 'Other generic targets:' 1262 @echo ' all - Build all targets marked with [*]' 1263 @echo '* vmlinux - Build the bare kernel' 1264 @echo '* modules - Build all modules' 1265 @echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)' 1266 @echo ' firmware_install- Install all firmware to INSTALL_FW_PATH' 1267 @echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)' 1268 @echo ' dir/ - Build all files in dir and below' 1269 @echo ' dir/file.[oisS] - Build specified target only' 1270 @echo ' dir/file.lst - Build specified mixed source/assembly target only' 1271 @echo ' (requires a recent binutils and recent build (System.map))' 1272 @echo ' dir/file.ko - Build module including final link' 1273 @echo ' modules_prepare - Set up for building external modules' 1274 @echo ' tags/TAGS - Generate tags file for editors' 1275 @echo ' cscope - Generate cscope index' 1276 @echo ' gtags - Generate GNU GLOBAL index' 1277 @echo ' kernelrelease - Output the release version string (use with make -s)' 1278 @echo ' kernelversion - Output the version stored in Makefile (use with make -s)' 1279 @echo ' image_name - Output the image name (use with make -s)' 1280 @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ 1281 echo ' (default: $(INSTALL_HDR_PATH))'; \ 1282 echo '' 1283 @echo 'Static analysers' 1284 @echo ' checkstack - Generate a list of stack hogs' 1285 @echo ' namespacecheck - Name space analysis on compiled kernel' 1286 @echo ' versioncheck - Sanity check on version.h usage' 1287 @echo ' includecheck - Check for duplicate included header files' 1288 @echo ' export_report - List the usages of all exported symbols' 1289 @echo ' headers_check - Sanity check on exported headers' 1290 @echo ' headerdep - Detect inclusion cycles in headers' 1291 @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help 1292 @echo '' 1293 @echo 'Kernel selftest' 1294 @echo ' kselftest - Build and run kernel selftest (run as root)' 1295 @echo ' Build, install, and boot kernel before' 1296 @echo ' running kselftest on it' 1297 @echo '' 1298 @echo 'Kernel packaging:' 1299 @$(MAKE) $(build)=$(package-dir) help 1300 @echo '' 1301 @echo 'Documentation targets:' 1302 @$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp 1303 @echo '' 1304 @echo 'Architecture specific targets ($(SRCARCH)):' 1305 @$(if $(archhelp),$(archhelp),\ 1306 echo ' No architecture specific help defined for $(SRCARCH)') 1307 @echo '' 1308 @$(if $(boards), \ 1309 $(foreach b, $(boards), \ 1310 printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \ 1311 echo '') 1312 @$(if $(board-dirs), \ 1313 $(foreach b, $(board-dirs), \ 1314 printf " %-16s - Show %s-specific targets\\n" help-$(b) $(b);) \ 1315 printf " %-16s - Show all of the above\\n" help-boards; \ 1316 echo '') 1317 1318 @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build' 1319 @echo ' make V=2 [targets] 2 => give reason for rebuild of target' 1320 @echo ' make O=dir [targets] Locate all output files in "dir", including .config' 1321 @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)' 1322 @echo ' make C=2 [targets] Force check of all c source with $$CHECK' 1323 @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections' 1324 @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where' 1325 @echo ' 1: warnings which may be relevant and do not occur too often' 1326 @echo ' 2: warnings which occur quite often but may still be relevant' 1327 @echo ' 3: more obscure warnings, can most likely be ignored' 1328 @echo ' Multiple levels can be combined with W=12 or W=123' 1329 @echo '' 1330 @echo 'Execute "make" or "make all" to build all targets marked with [*] ' 1331 @echo 'For further info see the ./README file' 1332 1333 1334help-board-dirs := $(addprefix help-,$(board-dirs)) 1335 1336help-boards: $(help-board-dirs) 1337 1338boards-per-dir = $(sort $(notdir $(wildcard $(srctree)/arch/$(SRCARCH)/configs/$*/*_defconfig))) 1339 1340$(help-board-dirs): help-%: 1341 @echo 'Architecture specific targets ($(SRCARCH) $*):' 1342 @$(if $(boards-per-dir), \ 1343 $(foreach b, $(boards-per-dir), \ 1344 printf " %-24s - Build for %s\\n" $*/$(b) $(subst _defconfig,,$(b));) \ 1345 echo '') 1346 1347 1348# Documentation targets 1349# --------------------------------------------------------------------------- 1350%docs: scripts_basic FORCE 1351 $(Q)$(MAKE) $(build)=scripts build_docproc 1352 $(Q)$(MAKE) $(build)=Documentation/DocBook $@ 1353 1354else # KBUILD_EXTMOD 1355 1356### 1357# External module support. 1358# When building external modules the kernel used as basis is considered 1359# read-only, and no consistency checks are made and the make 1360# system is not used on the basis kernel. If updates are required 1361# in the basis kernel ordinary make commands (without M=...) must 1362# be used. 1363# 1364# The following are the only valid targets when building external 1365# modules. 1366# make M=dir clean Delete all automatically generated files 1367# make M=dir modules Make all modules in specified dir 1368# make M=dir Same as 'make M=dir modules' 1369# make M=dir modules_install 1370# Install the modules built in the module directory 1371# Assumes install directory is already created 1372 1373# We are always building modules 1374KBUILD_MODULES := 1 1375PHONY += crmodverdir 1376crmodverdir: 1377 $(cmd_crmodverdir) 1378 1379PHONY += $(objtree)/Module.symvers 1380$(objtree)/Module.symvers: 1381 @test -e $(objtree)/Module.symvers || ( \ 1382 echo; \ 1383 echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \ 1384 echo " is missing; modules will have no dependencies and modversions."; \ 1385 echo ) 1386 1387module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD)) 1388PHONY += $(module-dirs) modules 1389$(module-dirs): crmodverdir $(objtree)/Module.symvers 1390 $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@) 1391 1392modules: $(module-dirs) 1393 @$(kecho) ' Building modules, stage 2.'; 1394 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1395 1396PHONY += modules_install 1397modules_install: _emodinst_ _emodinst_post 1398 1399install-dir := $(if $(INSTALL_MOD_DIR),$(INSTALL_MOD_DIR),extra) 1400PHONY += _emodinst_ 1401_emodinst_: 1402 $(Q)mkdir -p $(MODLIB)/$(install-dir) 1403 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst 1404 1405PHONY += _emodinst_post 1406_emodinst_post: _emodinst_ 1407 $(call cmd,depmod) 1408 1409clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD)) 1410 1411PHONY += $(clean-dirs) clean 1412$(clean-dirs): 1413 $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@) 1414 1415clean: rm-dirs := $(MODVERDIR) 1416clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers 1417 1418help: 1419 @echo ' Building external modules.' 1420 @echo ' Syntax: make -C path/to/kernel/src M=$$PWD target' 1421 @echo '' 1422 @echo ' modules - default target, build the module(s)' 1423 @echo ' modules_install - install the module' 1424 @echo ' clean - remove generated files in module directory only' 1425 @echo '' 1426 1427# Dummies... 1428PHONY += prepare scripts 1429prepare: ; 1430scripts: ; 1431endif # KBUILD_EXTMOD 1432 1433clean: $(clean-dirs) 1434 $(call cmd,rmdirs) 1435 $(call cmd,rmfiles) 1436 @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ 1437 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ 1438 -o -name '*.ko.*' \ 1439 -o -name '*.dwo' \ 1440 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ 1441 -o -name '*.symtypes' -o -name 'modules.order' \ 1442 -o -name modules.builtin -o -name '.tmp_*.o.*' \ 1443 -o -name '*.gcno' \) -type f -print | xargs rm -f 1444 1445# Generate tags for editors 1446# --------------------------------------------------------------------------- 1447quiet_cmd_tags = GEN $@ 1448 cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@ 1449 1450tags TAGS cscope gtags: FORCE 1451 $(call cmd,tags) 1452 1453# Scripts to check various things for consistency 1454# --------------------------------------------------------------------------- 1455 1456PHONY += includecheck versioncheck coccicheck namespacecheck export_report 1457 1458includecheck: 1459 find $(srctree)/* $(RCS_FIND_IGNORE) \ 1460 -name '*.[hcS]' -type f -print | sort \ 1461 | xargs $(PERL) -w $(srctree)/scripts/checkincludes.pl 1462 1463versioncheck: 1464 find $(srctree)/* $(RCS_FIND_IGNORE) \ 1465 -name '*.[hcS]' -type f -print | sort \ 1466 | xargs $(PERL) -w $(srctree)/scripts/checkversion.pl 1467 1468coccicheck: 1469 $(Q)$(CONFIG_SHELL) $(srctree)/scripts/$@ 1470 1471namespacecheck: 1472 $(PERL) $(srctree)/scripts/namespace.pl 1473 1474export_report: 1475 $(PERL) $(srctree)/scripts/export_report.pl 1476 1477endif #ifeq ($(config-targets),1) 1478endif #ifeq ($(mixed-targets),1) 1479 1480PHONY += checkstack kernelrelease kernelversion image_name 1481 1482# UML needs a little special treatment here. It wants to use the host 1483# toolchain, so needs $(SUBARCH) passed to checkstack.pl. Everyone 1484# else wants $(ARCH), including people doing cross-builds, which means 1485# that $(SUBARCH) doesn't work here. 1486ifeq ($(ARCH), um) 1487CHECKSTACK_ARCH := $(SUBARCH) 1488else 1489CHECKSTACK_ARCH := $(ARCH) 1490endif 1491checkstack: 1492 $(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \ 1493 $(PERL) $(src)/scripts/checkstack.pl $(CHECKSTACK_ARCH) 1494 1495kernelrelease: 1496 @echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))" 1497 1498kernelversion: 1499 @echo $(KERNELVERSION) 1500 1501image_name: 1502 @echo $(KBUILD_IMAGE) 1503 1504# Clear a bunch of variables before executing the submake 1505tools/: FORCE 1506 $(Q)mkdir -p $(objtree)/tools 1507 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(objtree) subdir=tools -C $(src)/tools/ 1508 1509tools/%: FORCE 1510 $(Q)mkdir -p $(objtree)/tools 1511 $(Q)$(MAKE) LDFLAGS= MAKEFLAGS="$(filter --j% -j,$(MAKEFLAGS))" O=$(objtree) subdir=tools -C $(src)/tools/ $* 1512 1513# Single targets 1514# --------------------------------------------------------------------------- 1515# Single targets are compatible with: 1516# - build with mixed source and output 1517# - build with separate output dir 'make O=...' 1518# - external modules 1519# 1520# target-dir => where to store outputfile 1521# build-dir => directory in kernel source tree to use 1522 1523ifeq ($(KBUILD_EXTMOD),) 1524 build-dir = $(patsubst %/,%,$(dir $@)) 1525 target-dir = $(dir $@) 1526else 1527 zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@))) 1528 build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash)) 1529 target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@)) 1530endif 1531 1532%.s: %.c prepare scripts FORCE 1533 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1534%.i: %.c prepare scripts FORCE 1535 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1536%.o: %.c prepare scripts FORCE 1537 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1538%.lst: %.c prepare scripts FORCE 1539 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1540%.s: %.S prepare scripts FORCE 1541 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1542%.o: %.S prepare scripts FORCE 1543 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1544%.symtypes: %.c prepare scripts FORCE 1545 $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@) 1546 1547# Modules 1548/: prepare scripts FORCE 1549 $(cmd_crmodverdir) 1550 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1551 $(build)=$(build-dir) 1552# Make sure the latest headers are built for Documentation 1553Documentation/: headers_install 1554%/: prepare scripts FORCE 1555 $(cmd_crmodverdir) 1556 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1557 $(build)=$(build-dir) 1558%.ko: prepare scripts FORCE 1559 $(cmd_crmodverdir) 1560 $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \ 1561 $(build)=$(build-dir) $(@:.ko=.o) 1562 $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost 1563 1564# FIXME Should go into a make.lib or something 1565# =========================================================================== 1566 1567quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) 1568 cmd_rmdirs = rm -rf $(rm-dirs) 1569 1570quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))) 1571 cmd_rmfiles = rm -f $(rm-files) 1572 1573# Run depmod only if we have System.map and depmod is executable 1574quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) 1575 cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ 1576 $(KERNELRELEASE) "$(patsubst y,_,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX))" 1577 1578# Create temporary dir for module support files 1579# clean it up only when building all modules 1580cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \ 1581 $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*) 1582 1583# read all saved command lines 1584 1585targets := $(wildcard $(sort $(targets))) 1586cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd)) 1587 1588ifneq ($(cmd_files),) 1589 $(cmd_files): ; # Do not try to update included dependency files 1590 include $(cmd_files) 1591endif 1592 1593endif # skip-makefile 1594 1595PHONY += FORCE 1596FORCE: 1597 1598# Declare the contents of the .PHONY variable as phony. We keep that 1599# information in a variable so we can use it in if_changed and friends. 1600.PHONY: $(PHONY) 1601