1.. SPDX-License-Identifier: GPL-2.0
2
3===========================================================
4POWER9 eXternal Interrupt Virtualization Engine (XIVE Gen1)
5===========================================================
6
7Device types supported:
8  - KVM_DEV_TYPE_XIVE     POWER9 XIVE Interrupt Controller generation 1
9
10This device acts as a VM interrupt controller. It provides the KVM
11interface to configure the interrupt sources of a VM in the underlying
12POWER9 XIVE interrupt controller.
13
14Only one XIVE instance may be instantiated. A guest XIVE device
15requires a POWER9 host and the guest OS should have support for the
16XIVE native exploitation interrupt mode. If not, it should run using
17the legacy interrupt mode, referred as XICS (POWER7/8).
18
19* Device Mappings
20
21  The KVM device exposes different MMIO ranges of the XIVE HW which
22  are required for interrupt management. These are exposed to the
23  guest in VMAs populated with a custom VM fault handler.
24
25  1. Thread Interrupt Management Area (TIMA)
26
27  Each thread has an associated Thread Interrupt Management context
28  composed of a set of registers. These registers let the thread
29  handle priority management and interrupt acknowledgment. The most
30  important are :
31
32      - Interrupt Pending Buffer     (IPB)
33      - Current Processor Priority   (CPPR)
34      - Notification Source Register (NSR)
35
36  They are exposed to software in four different pages each proposing
37  a view with a different privilege. The first page is for the
38  physical thread context and the second for the hypervisor. Only the
39  third (operating system) and the fourth (user level) are exposed the
40  guest.
41
42  2. Event State Buffer (ESB)
43
44  Each source is associated with an Event State Buffer (ESB) with
45  either a pair of even/odd pair of pages which provides commands to
46  manage the source: to trigger, to EOI, to turn off the source for
47  instance.
48
49  3. Device pass-through
50
51  When a device is passed-through into the guest, the source
52  interrupts are from a different HW controller (PHB4) and the ESB
53  pages exposed to the guest should accommadate this change.
54
55  The passthru_irq helpers, kvmppc_xive_set_mapped() and
56  kvmppc_xive_clr_mapped() are called when the device HW irqs are
57  mapped into or unmapped from the guest IRQ number space. The KVM
58  device extends these helpers to clear the ESB pages of the guest IRQ
59  number being mapped and then lets the VM fault handler repopulate.
60  The handler will insert the ESB page corresponding to the HW
61  interrupt of the device being passed-through or the initial IPI ESB
62  page if the device has being removed.
63
64  The ESB remapping is fully transparent to the guest and the OS
65  device driver. All handling is done within VFIO and the above
66  helpers in KVM-PPC.
67
68* Groups:
69
701. KVM_DEV_XIVE_GRP_CTRL
71     Provides global controls on the device
72
73  Attributes:
74    1.1 KVM_DEV_XIVE_RESET (write only)
75    Resets the interrupt controller configuration for sources and event
76    queues. To be used by kexec and kdump.
77
78    Errors: none
79
80    1.2 KVM_DEV_XIVE_EQ_SYNC (write only)
81    Sync all the sources and queues and mark the EQ pages dirty. This
82    to make sure that a consistent memory state is captured when
83    migrating the VM.
84
85    Errors: none
86
87    1.3 KVM_DEV_XIVE_NR_SERVERS (write only)
88    The kvm_device_attr.addr points to a __u32 value which is the number of
89    interrupt server numbers (ie, highest possible vcpu id plus one).
90
91    Errors:
92
93      =======  ==========================================
94      -EINVAL  Value greater than KVM_MAX_VCPU_ID.
95      -EFAULT  Invalid user pointer for attr->addr.
96      -EBUSY   A vCPU is already connected to the device.
97      =======  ==========================================
98
992. KVM_DEV_XIVE_GRP_SOURCE (write only)
100     Initializes a new source in the XIVE device and mask it.
101
102  Attributes:
103    Interrupt source number  (64-bit)
104
105  The kvm_device_attr.addr points to a __u64 value::
106
107    bits:     | 63   ....  2 |   1   |   0
108    values:   |    unused    | level | type
109
110  - type:  0:MSI 1:LSI
111  - level: assertion level in case of an LSI.
112
113  Errors:
114
115    =======  ==========================================
116    -E2BIG   Interrupt source number is out of range
117    -ENOMEM  Could not create a new source block
118    -EFAULT  Invalid user pointer for attr->addr.
119    -ENXIO   Could not allocate underlying HW interrupt
120    =======  ==========================================
121
1223. KVM_DEV_XIVE_GRP_SOURCE_CONFIG (write only)
123     Configures source targeting
124
125  Attributes:
126    Interrupt source number  (64-bit)
127
128  The kvm_device_attr.addr points to a __u64 value::
129
130    bits:     | 63   ....  33 |  32  | 31 .. 3 |  2 .. 0
131    values:   |    eisn       | mask |  server | priority
132
133  - priority: 0-7 interrupt priority level
134  - server: CPU number chosen to handle the interrupt
135  - mask: mask flag (unused)
136  - eisn: Effective Interrupt Source Number
137
138  Errors:
139
140    =======  =======================================================
141    -ENOENT  Unknown source number
142    -EINVAL  Not initialized source number
143    -EINVAL  Invalid priority
144    -EINVAL  Invalid CPU number.
145    -EFAULT  Invalid user pointer for attr->addr.
146    -ENXIO   CPU event queues not configured or configuration of the
147	     underlying HW interrupt failed
148    -EBUSY   No CPU available to serve interrupt
149    =======  =======================================================
150
1514. KVM_DEV_XIVE_GRP_EQ_CONFIG (read-write)
152     Configures an event queue of a CPU
153
154  Attributes:
155    EQ descriptor identifier (64-bit)
156
157  The EQ descriptor identifier is a tuple (server, priority)::
158
159    bits:     | 63   ....  32 | 31 .. 3 |  2 .. 0
160    values:   |    unused     |  server | priority
161
162  The kvm_device_attr.addr points to::
163
164    struct kvm_ppc_xive_eq {
165	__u32 flags;
166	__u32 qshift;
167	__u64 qaddr;
168	__u32 qtoggle;
169	__u32 qindex;
170	__u8  pad[40];
171    };
172
173  - flags: queue flags
174      KVM_XIVE_EQ_ALWAYS_NOTIFY (required)
175	forces notification without using the coalescing mechanism
176	provided by the XIVE END ESBs.
177  - qshift: queue size (power of 2)
178  - qaddr: real address of queue
179  - qtoggle: current queue toggle bit
180  - qindex: current queue index
181  - pad: reserved for future use
182
183  Errors:
184
185    =======  =========================================
186    -ENOENT  Invalid CPU number
187    -EINVAL  Invalid priority
188    -EINVAL  Invalid flags
189    -EINVAL  Invalid queue size
190    -EINVAL  Invalid queue address
191    -EFAULT  Invalid user pointer for attr->addr.
192    -EIO     Configuration of the underlying HW failed
193    =======  =========================================
194
1955. KVM_DEV_XIVE_GRP_SOURCE_SYNC (write only)
196     Synchronize the source to flush event notifications
197
198  Attributes:
199    Interrupt source number  (64-bit)
200
201  Errors:
202
203    =======  =============================
204    -ENOENT  Unknown source number
205    -EINVAL  Not initialized source number
206    =======  =============================
207
208* VCPU state
209
210  The XIVE IC maintains VP interrupt state in an internal structure
211  called the NVT. When a VP is not dispatched on a HW processor
212  thread, this structure can be updated by HW if the VP is the target
213  of an event notification.
214
215  It is important for migration to capture the cached IPB from the NVT
216  as it synthesizes the priorities of the pending interrupts. We
217  capture a bit more to report debug information.
218
219  KVM_REG_PPC_VP_STATE (2 * 64bits)::
220
221    bits:     |  63  ....  32  |  31  ....  0  |
222    values:   |   TIMA word0   |   TIMA word1  |
223    bits:     | 127       ..........       64  |
224    values:   |            unused              |
225
226* Migration:
227
228  Saving the state of a VM using the XIVE native exploitation mode
229  should follow a specific sequence. When the VM is stopped :
230
231  1. Mask all sources (PQ=01) to stop the flow of events.
232
233  2. Sync the XIVE device with the KVM control KVM_DEV_XIVE_EQ_SYNC to
234  flush any in-flight event notification and to stabilize the EQs. At
235  this stage, the EQ pages are marked dirty to make sure they are
236  transferred in the migration sequence.
237
238  3. Capture the state of the source targeting, the EQs configuration
239  and the state of thread interrupt context registers.
240
241  Restore is similar:
242
243  1. Restore the EQ configuration. As targeting depends on it.
244  2. Restore targeting
245  3. Restore the thread interrupt contexts
246  4. Restore the source states
247  5. Let the vCPU run
248