1.. SPDX-License-Identifier: GPL-2.0
2
3=========================
4XICS interrupt controller
5=========================
6
7Device type supported: KVM_DEV_TYPE_XICS
8
9Groups:
10  1. KVM_DEV_XICS_GRP_SOURCES
11       Attributes:
12
13         One per interrupt source, indexed by the source number.
14  2. KVM_DEV_XICS_GRP_CTRL
15       Attributes:
16
17         2.1 KVM_DEV_XICS_NR_SERVERS (write only)
18
19  The kvm_device_attr.addr points to a __u32 value which is the number of
20  interrupt server numbers (ie, highest possible vcpu id plus one).
21
22  Errors:
23
24    =======  ==========================================
25    -EINVAL  Value greater than KVM_MAX_VCPU_ID.
26    -EFAULT  Invalid user pointer for attr->addr.
27    -EBUSY   A vcpu is already connected to the device.
28    =======  ==========================================
29
30This device emulates the XICS (eXternal Interrupt Controller
31Specification) defined in PAPR.  The XICS has a set of interrupt
32sources, each identified by a 20-bit source number, and a set of
33Interrupt Control Presentation (ICP) entities, also called "servers",
34each associated with a virtual CPU.
35
36The ICP entities are created by enabling the KVM_CAP_IRQ_ARCH
37capability for each vcpu, specifying KVM_CAP_IRQ_XICS in args[0] and
38the interrupt server number (i.e. the vcpu number from the XICS's
39point of view) in args[1] of the kvm_enable_cap struct.  Each ICP has
4064 bits of state which can be read and written using the
41KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls on the vcpu.  The 64 bit
42state word has the following bitfields, starting at the
43least-significant end of the word:
44
45* Unused, 16 bits
46
47* Pending interrupt priority, 8 bits
48  Zero is the highest priority, 255 means no interrupt is pending.
49
50* Pending IPI (inter-processor interrupt) priority, 8 bits
51  Zero is the highest priority, 255 means no IPI is pending.
52
53* Pending interrupt source number, 24 bits
54  Zero means no interrupt pending, 2 means an IPI is pending
55
56* Current processor priority, 8 bits
57  Zero is the highest priority, meaning no interrupts can be
58  delivered, and 255 is the lowest priority.
59
60Each source has 64 bits of state that can be read and written using
61the KVM_GET_DEVICE_ATTR and KVM_SET_DEVICE_ATTR ioctls, specifying the
62KVM_DEV_XICS_GRP_SOURCES attribute group, with the attribute number being
63the interrupt source number.  The 64 bit state word has the following
64bitfields, starting from the least-significant end of the word:
65
66* Destination (server number), 32 bits
67
68  This specifies where the interrupt should be sent, and is the
69  interrupt server number specified for the destination vcpu.
70
71* Priority, 8 bits
72
73  This is the priority specified for this interrupt source, where 0 is
74  the highest priority and 255 is the lowest.  An interrupt with a
75  priority of 255 will never be delivered.
76
77* Level sensitive flag, 1 bit
78
79  This bit is 1 for a level-sensitive interrupt source, or 0 for
80  edge-sensitive (or MSI).
81
82* Masked flag, 1 bit
83
84  This bit is set to 1 if the interrupt is masked (cannot be delivered
85  regardless of its priority), for example by the ibm,int-off RTAS
86  call, or 0 if it is not masked.
87
88* Pending flag, 1 bit
89
90  This bit is 1 if the source has a pending interrupt, otherwise 0.
91
92Only one XICS instance may be created per VM.
93