1.. SPDX-License-Identifier: GPL-2.0 2 3=================================================================== 4The Definitive KVM (Kernel-based Virtual Machine) API Documentation 5=================================================================== 6 71. General description 8====================== 9 10The kvm API is a set of ioctls that are issued to control various aspects 11of a virtual machine. The ioctls belong to the following classes: 12 13 - System ioctls: These query and set global attributes which affect the 14 whole kvm subsystem. In addition a system ioctl is used to create 15 virtual machines. 16 17 - VM ioctls: These query and set attributes that affect an entire virtual 18 machine, for example memory layout. In addition a VM ioctl is used to 19 create virtual cpus (vcpus) and devices. 20 21 VM ioctls must be issued from the same process (address space) that was 22 used to create the VM. 23 24 - vcpu ioctls: These query and set attributes that control the operation 25 of a single virtual cpu. 26 27 vcpu ioctls should be issued from the same thread that was used to create 28 the vcpu, except for asynchronous vcpu ioctl that are marked as such in 29 the documentation. Otherwise, the first ioctl after switching threads 30 could see a performance impact. 31 32 - device ioctls: These query and set attributes that control the operation 33 of a single device. 34 35 device ioctls must be issued from the same process (address space) that 36 was used to create the VM. 37 382. File descriptors 39=================== 40 41The kvm API is centered around file descriptors. An initial 42open("/dev/kvm") obtains a handle to the kvm subsystem; this handle 43can be used to issue system ioctls. A KVM_CREATE_VM ioctl on this 44handle will create a VM file descriptor which can be used to issue VM 45ioctls. A KVM_CREATE_VCPU or KVM_CREATE_DEVICE ioctl on a VM fd will 46create a virtual cpu or device and return a file descriptor pointing to 47the new resource. Finally, ioctls on a vcpu or device fd can be used 48to control the vcpu or device. For vcpus, this includes the important 49task of actually running guest code. 50 51In general file descriptors can be migrated among processes by means 52of fork() and the SCM_RIGHTS facility of unix domain socket. These 53kinds of tricks are explicitly not supported by kvm. While they will 54not cause harm to the host, their actual behavior is not guaranteed by 55the API. See "General description" for details on the ioctl usage 56model that is supported by KVM. 57 58It is important to note that although VM ioctls may only be issued from 59the process that created the VM, a VM's lifecycle is associated with its 60file descriptor, not its creator (process). In other words, the VM and 61its resources, *including the associated address space*, are not freed 62until the last reference to the VM's file descriptor has been released. 63For example, if fork() is issued after ioctl(KVM_CREATE_VM), the VM will 64not be freed until both the parent (original) process and its child have 65put their references to the VM's file descriptor. 66 67Because a VM's resources are not freed until the last reference to its 68file descriptor is released, creating additional references to a VM 69via fork(), dup(), etc... without careful consideration is strongly 70discouraged and may have unwanted side effects, e.g. memory allocated 71by and on behalf of the VM's process may not be freed/unaccounted when 72the VM is shut down. 73 74 753. Extensions 76============= 77 78As of Linux 2.6.22, the KVM ABI has been stabilized: no backward 79incompatible change are allowed. However, there is an extension 80facility that allows backward-compatible extensions to the API to be 81queried and used. 82 83The extension mechanism is not based on the Linux version number. 84Instead, kvm defines extension identifiers and a facility to query 85whether a particular extension identifier is available. If it is, a 86set of ioctls is available for application use. 87 88 894. API description 90================== 91 92This section describes ioctls that can be used to control kvm guests. 93For each ioctl, the following information is provided along with a 94description: 95 96 Capability: 97 which KVM extension provides this ioctl. Can be 'basic', 98 which means that is will be provided by any kernel that supports 99 API version 12 (see section 4.1), a KVM_CAP_xyz constant, which 100 means availability needs to be checked with KVM_CHECK_EXTENSION 101 (see section 4.4), or 'none' which means that while not all kernels 102 support this ioctl, there's no capability bit to check its 103 availability: for kernels that don't support the ioctl, 104 the ioctl returns -ENOTTY. 105 106 Architectures: 107 which instruction set architectures provide this ioctl. 108 x86 includes both i386 and x86_64. 109 110 Type: 111 system, vm, or vcpu. 112 113 Parameters: 114 what parameters are accepted by the ioctl. 115 116 Returns: 117 the return value. General error numbers (EBADF, ENOMEM, EINVAL) 118 are not detailed, but errors with specific meanings are. 119 120 1214.1 KVM_GET_API_VERSION 122----------------------- 123 124:Capability: basic 125:Architectures: all 126:Type: system ioctl 127:Parameters: none 128:Returns: the constant KVM_API_VERSION (=12) 129 130This identifies the API version as the stable kvm API. It is not 131expected that this number will change. However, Linux 2.6.20 and 1322.6.21 report earlier versions; these are not documented and not 133supported. Applications should refuse to run if KVM_GET_API_VERSION 134returns a value other than 12. If this check passes, all ioctls 135described as 'basic' will be available. 136 137 1384.2 KVM_CREATE_VM 139----------------- 140 141:Capability: basic 142:Architectures: all 143:Type: system ioctl 144:Parameters: machine type identifier (KVM_VM_*) 145:Returns: a VM fd that can be used to control the new virtual machine. 146 147The new VM has no virtual cpus and no memory. 148You probably want to use 0 as machine type. 149 150In order to create user controlled virtual machines on S390, check 151KVM_CAP_S390_UCONTROL and use the flag KVM_VM_S390_UCONTROL as 152privileged user (CAP_SYS_ADMIN). 153 154On arm64, the physical address size for a VM (IPA Size limit) is limited 155to 40bits by default. The limit can be configured if the host supports the 156extension KVM_CAP_ARM_VM_IPA_SIZE. When supported, use 157KVM_VM_TYPE_ARM_IPA_SIZE(IPA_Bits) to set the size in the machine type 158identifier, where IPA_Bits is the maximum width of any physical 159address used by the VM. The IPA_Bits is encoded in bits[7-0] of the 160machine type identifier. 161 162e.g, to configure a guest to use 48bit physical address size:: 163 164 vm_fd = ioctl(dev_fd, KVM_CREATE_VM, KVM_VM_TYPE_ARM_IPA_SIZE(48)); 165 166The requested size (IPA_Bits) must be: 167 168 == ========================================================= 169 0 Implies default size, 40bits (for backward compatibility) 170 N Implies N bits, where N is a positive integer such that, 171 32 <= N <= Host_IPA_Limit 172 == ========================================================= 173 174Host_IPA_Limit is the maximum possible value for IPA_Bits on the host and 175is dependent on the CPU capability and the kernel configuration. The limit can 176be retrieved using KVM_CAP_ARM_VM_IPA_SIZE of the KVM_CHECK_EXTENSION 177ioctl() at run-time. 178 179Creation of the VM will fail if the requested IPA size (whether it is 180implicit or explicit) is unsupported on the host. 181 182Please note that configuring the IPA size does not affect the capability 183exposed by the guest CPUs in ID_AA64MMFR0_EL1[PARange]. It only affects 184size of the address translated by the stage2 level (guest physical to 185host physical address translations). 186 187 1884.3 KVM_GET_MSR_INDEX_LIST, KVM_GET_MSR_FEATURE_INDEX_LIST 189---------------------------------------------------------- 190 191:Capability: basic, KVM_CAP_GET_MSR_FEATURES for KVM_GET_MSR_FEATURE_INDEX_LIST 192:Architectures: x86 193:Type: system ioctl 194:Parameters: struct kvm_msr_list (in/out) 195:Returns: 0 on success; -1 on error 196 197Errors: 198 199 ====== ============================================================ 200 EFAULT the msr index list cannot be read from or written to 201 E2BIG the msr index list is too big to fit in the array specified by 202 the user. 203 ====== ============================================================ 204 205:: 206 207 struct kvm_msr_list { 208 __u32 nmsrs; /* number of msrs in entries */ 209 __u32 indices[0]; 210 }; 211 212The user fills in the size of the indices array in nmsrs, and in return 213kvm adjusts nmsrs to reflect the actual number of msrs and fills in the 214indices array with their numbers. 215 216KVM_GET_MSR_INDEX_LIST returns the guest msrs that are supported. The list 217varies by kvm version and host processor, but does not change otherwise. 218 219Note: if kvm indicates supports MCE (KVM_CAP_MCE), then the MCE bank MSRs are 220not returned in the MSR list, as different vcpus can have a different number 221of banks, as set via the KVM_X86_SETUP_MCE ioctl. 222 223KVM_GET_MSR_FEATURE_INDEX_LIST returns the list of MSRs that can be passed 224to the KVM_GET_MSRS system ioctl. This lets userspace probe host capabilities 225and processor features that are exposed via MSRs (e.g., VMX capabilities). 226This list also varies by kvm version and host processor, but does not change 227otherwise. 228 229 2304.4 KVM_CHECK_EXTENSION 231----------------------- 232 233:Capability: basic, KVM_CAP_CHECK_EXTENSION_VM for vm ioctl 234:Architectures: all 235:Type: system ioctl, vm ioctl 236:Parameters: extension identifier (KVM_CAP_*) 237:Returns: 0 if unsupported; 1 (or some other positive integer) if supported 238 239The API allows the application to query about extensions to the core 240kvm API. Userspace passes an extension identifier (an integer) and 241receives an integer that describes the extension availability. 242Generally 0 means no and 1 means yes, but some extensions may report 243additional information in the integer return value. 244 245Based on their initialization different VMs may have different capabilities. 246It is thus encouraged to use the vm ioctl to query for capabilities (available 247with KVM_CAP_CHECK_EXTENSION_VM on the vm fd) 248 2494.5 KVM_GET_VCPU_MMAP_SIZE 250-------------------------- 251 252:Capability: basic 253:Architectures: all 254:Type: system ioctl 255:Parameters: none 256:Returns: size of vcpu mmap area, in bytes 257 258The KVM_RUN ioctl (cf.) communicates with userspace via a shared 259memory region. This ioctl returns the size of that region. See the 260KVM_RUN documentation for details. 261 262Besides the size of the KVM_RUN communication region, other areas of 263the VCPU file descriptor can be mmap-ed, including: 264 265- if KVM_CAP_COALESCED_MMIO is available, a page at 266 KVM_COALESCED_MMIO_PAGE_OFFSET * PAGE_SIZE; for historical reasons, 267 this page is included in the result of KVM_GET_VCPU_MMAP_SIZE. 268 KVM_CAP_COALESCED_MMIO is not documented yet. 269 270- if KVM_CAP_DIRTY_LOG_RING is available, a number of pages at 271 KVM_DIRTY_LOG_PAGE_OFFSET * PAGE_SIZE. For more information on 272 KVM_CAP_DIRTY_LOG_RING, see section 8.3. 273 274 2754.7 KVM_CREATE_VCPU 276------------------- 277 278:Capability: basic 279:Architectures: all 280:Type: vm ioctl 281:Parameters: vcpu id (apic id on x86) 282:Returns: vcpu fd on success, -1 on error 283 284This API adds a vcpu to a virtual machine. No more than max_vcpus may be added. 285The vcpu id is an integer in the range [0, max_vcpu_id). 286 287The recommended max_vcpus value can be retrieved using the KVM_CAP_NR_VCPUS of 288the KVM_CHECK_EXTENSION ioctl() at run-time. 289The maximum possible value for max_vcpus can be retrieved using the 290KVM_CAP_MAX_VCPUS of the KVM_CHECK_EXTENSION ioctl() at run-time. 291 292If the KVM_CAP_NR_VCPUS does not exist, you should assume that max_vcpus is 4 293cpus max. 294If the KVM_CAP_MAX_VCPUS does not exist, you should assume that max_vcpus is 295same as the value returned from KVM_CAP_NR_VCPUS. 296 297The maximum possible value for max_vcpu_id can be retrieved using the 298KVM_CAP_MAX_VCPU_ID of the KVM_CHECK_EXTENSION ioctl() at run-time. 299 300If the KVM_CAP_MAX_VCPU_ID does not exist, you should assume that max_vcpu_id 301is the same as the value returned from KVM_CAP_MAX_VCPUS. 302 303On powerpc using book3s_hv mode, the vcpus are mapped onto virtual 304threads in one or more virtual CPU cores. (This is because the 305hardware requires all the hardware threads in a CPU core to be in the 306same partition.) The KVM_CAP_PPC_SMT capability indicates the number 307of vcpus per virtual core (vcore). The vcore id is obtained by 308dividing the vcpu id by the number of vcpus per vcore. The vcpus in a 309given vcore will always be in the same physical core as each other 310(though that might be a different physical core from time to time). 311Userspace can control the threading (SMT) mode of the guest by its 312allocation of vcpu ids. For example, if userspace wants 313single-threaded guest vcpus, it should make all vcpu ids be a multiple 314of the number of vcpus per vcore. 315 316For virtual cpus that have been created with S390 user controlled virtual 317machines, the resulting vcpu fd can be memory mapped at page offset 318KVM_S390_SIE_PAGE_OFFSET in order to obtain a memory map of the virtual 319cpu's hardware control block. 320 321 3224.8 KVM_GET_DIRTY_LOG (vm ioctl) 323-------------------------------- 324 325:Capability: basic 326:Architectures: all 327:Type: vm ioctl 328:Parameters: struct kvm_dirty_log (in/out) 329:Returns: 0 on success, -1 on error 330 331:: 332 333 /* for KVM_GET_DIRTY_LOG */ 334 struct kvm_dirty_log { 335 __u32 slot; 336 __u32 padding; 337 union { 338 void __user *dirty_bitmap; /* one bit per page */ 339 __u64 padding; 340 }; 341 }; 342 343Given a memory slot, return a bitmap containing any pages dirtied 344since the last call to this ioctl. Bit 0 is the first page in the 345memory slot. Ensure the entire structure is cleared to avoid padding 346issues. 347 348If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of slot field specifies 349the address space for which you want to return the dirty bitmap. See 350KVM_SET_USER_MEMORY_REGION for details on the usage of slot field. 351 352The bits in the dirty bitmap are cleared before the ioctl returns, unless 353KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is enabled. For more information, 354see the description of the capability. 355 356Note that the Xen shared info page, if configured, shall always be assumed 357to be dirty. KVM will not explicitly mark it such. 358 359 3604.10 KVM_RUN 361------------ 362 363:Capability: basic 364:Architectures: all 365:Type: vcpu ioctl 366:Parameters: none 367:Returns: 0 on success, -1 on error 368 369Errors: 370 371 ======= ============================================================== 372 EINTR an unmasked signal is pending 373 ENOEXEC the vcpu hasn't been initialized or the guest tried to execute 374 instructions from device memory (arm64) 375 ENOSYS data abort outside memslots with no syndrome info and 376 KVM_CAP_ARM_NISV_TO_USER not enabled (arm64) 377 EPERM SVE feature set but not finalized (arm64) 378 ======= ============================================================== 379 380This ioctl is used to run a guest virtual cpu. While there are no 381explicit parameters, there is an implicit parameter block that can be 382obtained by mmap()ing the vcpu fd at offset 0, with the size given by 383KVM_GET_VCPU_MMAP_SIZE. The parameter block is formatted as a 'struct 384kvm_run' (see below). 385 386 3874.11 KVM_GET_REGS 388----------------- 389 390:Capability: basic 391:Architectures: all except arm64 392:Type: vcpu ioctl 393:Parameters: struct kvm_regs (out) 394:Returns: 0 on success, -1 on error 395 396Reads the general purpose registers from the vcpu. 397 398:: 399 400 /* x86 */ 401 struct kvm_regs { 402 /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ 403 __u64 rax, rbx, rcx, rdx; 404 __u64 rsi, rdi, rsp, rbp; 405 __u64 r8, r9, r10, r11; 406 __u64 r12, r13, r14, r15; 407 __u64 rip, rflags; 408 }; 409 410 /* mips */ 411 struct kvm_regs { 412 /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ 413 __u64 gpr[32]; 414 __u64 hi; 415 __u64 lo; 416 __u64 pc; 417 }; 418 419 4204.12 KVM_SET_REGS 421----------------- 422 423:Capability: basic 424:Architectures: all except arm64 425:Type: vcpu ioctl 426:Parameters: struct kvm_regs (in) 427:Returns: 0 on success, -1 on error 428 429Writes the general purpose registers into the vcpu. 430 431See KVM_GET_REGS for the data structure. 432 433 4344.13 KVM_GET_SREGS 435------------------ 436 437:Capability: basic 438:Architectures: x86, ppc 439:Type: vcpu ioctl 440:Parameters: struct kvm_sregs (out) 441:Returns: 0 on success, -1 on error 442 443Reads special registers from the vcpu. 444 445:: 446 447 /* x86 */ 448 struct kvm_sregs { 449 struct kvm_segment cs, ds, es, fs, gs, ss; 450 struct kvm_segment tr, ldt; 451 struct kvm_dtable gdt, idt; 452 __u64 cr0, cr2, cr3, cr4, cr8; 453 __u64 efer; 454 __u64 apic_base; 455 __u64 interrupt_bitmap[(KVM_NR_INTERRUPTS + 63) / 64]; 456 }; 457 458 /* ppc -- see arch/powerpc/include/uapi/asm/kvm.h */ 459 460interrupt_bitmap is a bitmap of pending external interrupts. At most 461one bit may be set. This interrupt has been acknowledged by the APIC 462but not yet injected into the cpu core. 463 464 4654.14 KVM_SET_SREGS 466------------------ 467 468:Capability: basic 469:Architectures: x86, ppc 470:Type: vcpu ioctl 471:Parameters: struct kvm_sregs (in) 472:Returns: 0 on success, -1 on error 473 474Writes special registers into the vcpu. See KVM_GET_SREGS for the 475data structures. 476 477 4784.15 KVM_TRANSLATE 479------------------ 480 481:Capability: basic 482:Architectures: x86 483:Type: vcpu ioctl 484:Parameters: struct kvm_translation (in/out) 485:Returns: 0 on success, -1 on error 486 487Translates a virtual address according to the vcpu's current address 488translation mode. 489 490:: 491 492 struct kvm_translation { 493 /* in */ 494 __u64 linear_address; 495 496 /* out */ 497 __u64 physical_address; 498 __u8 valid; 499 __u8 writeable; 500 __u8 usermode; 501 __u8 pad[5]; 502 }; 503 504 5054.16 KVM_INTERRUPT 506------------------ 507 508:Capability: basic 509:Architectures: x86, ppc, mips, riscv 510:Type: vcpu ioctl 511:Parameters: struct kvm_interrupt (in) 512:Returns: 0 on success, negative on failure. 513 514Queues a hardware interrupt vector to be injected. 515 516:: 517 518 /* for KVM_INTERRUPT */ 519 struct kvm_interrupt { 520 /* in */ 521 __u32 irq; 522 }; 523 524X86: 525^^^^ 526 527:Returns: 528 529 ========= =================================== 530 0 on success, 531 -EEXIST if an interrupt is already enqueued 532 -EINVAL the irq number is invalid 533 -ENXIO if the PIC is in the kernel 534 -EFAULT if the pointer is invalid 535 ========= =================================== 536 537Note 'irq' is an interrupt vector, not an interrupt pin or line. This 538ioctl is useful if the in-kernel PIC is not used. 539 540PPC: 541^^^^ 542 543Queues an external interrupt to be injected. This ioctl is overleaded 544with 3 different irq values: 545 546a) KVM_INTERRUPT_SET 547 548 This injects an edge type external interrupt into the guest once it's ready 549 to receive interrupts. When injected, the interrupt is done. 550 551b) KVM_INTERRUPT_UNSET 552 553 This unsets any pending interrupt. 554 555 Only available with KVM_CAP_PPC_UNSET_IRQ. 556 557c) KVM_INTERRUPT_SET_LEVEL 558 559 This injects a level type external interrupt into the guest context. The 560 interrupt stays pending until a specific ioctl with KVM_INTERRUPT_UNSET 561 is triggered. 562 563 Only available with KVM_CAP_PPC_IRQ_LEVEL. 564 565Note that any value for 'irq' other than the ones stated above is invalid 566and incurs unexpected behavior. 567 568This is an asynchronous vcpu ioctl and can be invoked from any thread. 569 570MIPS: 571^^^^^ 572 573Queues an external interrupt to be injected into the virtual CPU. A negative 574interrupt number dequeues the interrupt. 575 576This is an asynchronous vcpu ioctl and can be invoked from any thread. 577 578RISC-V: 579^^^^^^^ 580 581Queues an external interrupt to be injected into the virutal CPU. This ioctl 582is overloaded with 2 different irq values: 583 584a) KVM_INTERRUPT_SET 585 586 This sets external interrupt for a virtual CPU and it will receive 587 once it is ready. 588 589b) KVM_INTERRUPT_UNSET 590 591 This clears pending external interrupt for a virtual CPU. 592 593This is an asynchronous vcpu ioctl and can be invoked from any thread. 594 595 5964.17 KVM_DEBUG_GUEST 597-------------------- 598 599:Capability: basic 600:Architectures: none 601:Type: vcpu ioctl 602:Parameters: none) 603:Returns: -1 on error 604 605Support for this has been removed. Use KVM_SET_GUEST_DEBUG instead. 606 607 6084.18 KVM_GET_MSRS 609----------------- 610 611:Capability: basic (vcpu), KVM_CAP_GET_MSR_FEATURES (system) 612:Architectures: x86 613:Type: system ioctl, vcpu ioctl 614:Parameters: struct kvm_msrs (in/out) 615:Returns: number of msrs successfully returned; 616 -1 on error 617 618When used as a system ioctl: 619Reads the values of MSR-based features that are available for the VM. This 620is similar to KVM_GET_SUPPORTED_CPUID, but it returns MSR indices and values. 621The list of msr-based features can be obtained using KVM_GET_MSR_FEATURE_INDEX_LIST 622in a system ioctl. 623 624When used as a vcpu ioctl: 625Reads model-specific registers from the vcpu. Supported msr indices can 626be obtained using KVM_GET_MSR_INDEX_LIST in a system ioctl. 627 628:: 629 630 struct kvm_msrs { 631 __u32 nmsrs; /* number of msrs in entries */ 632 __u32 pad; 633 634 struct kvm_msr_entry entries[0]; 635 }; 636 637 struct kvm_msr_entry { 638 __u32 index; 639 __u32 reserved; 640 __u64 data; 641 }; 642 643Application code should set the 'nmsrs' member (which indicates the 644size of the entries array) and the 'index' member of each array entry. 645kvm will fill in the 'data' member. 646 647 6484.19 KVM_SET_MSRS 649----------------- 650 651:Capability: basic 652:Architectures: x86 653:Type: vcpu ioctl 654:Parameters: struct kvm_msrs (in) 655:Returns: number of msrs successfully set (see below), -1 on error 656 657Writes model-specific registers to the vcpu. See KVM_GET_MSRS for the 658data structures. 659 660Application code should set the 'nmsrs' member (which indicates the 661size of the entries array), and the 'index' and 'data' members of each 662array entry. 663 664It tries to set the MSRs in array entries[] one by one. If setting an MSR 665fails, e.g., due to setting reserved bits, the MSR isn't supported/emulated 666by KVM, etc..., it stops processing the MSR list and returns the number of 667MSRs that have been set successfully. 668 669 6704.20 KVM_SET_CPUID 671------------------ 672 673:Capability: basic 674:Architectures: x86 675:Type: vcpu ioctl 676:Parameters: struct kvm_cpuid (in) 677:Returns: 0 on success, -1 on error 678 679Defines the vcpu responses to the cpuid instruction. Applications 680should use the KVM_SET_CPUID2 ioctl if available. 681 682Caveat emptor: 683 - If this IOCTL fails, KVM gives no guarantees that previous valid CPUID 684 configuration (if there is) is not corrupted. Userspace can get a copy 685 of the resulting CPUID configuration through KVM_GET_CPUID2 in case. 686 - Using KVM_SET_CPUID{,2} after KVM_RUN, i.e. changing the guest vCPU model 687 after running the guest, may cause guest instability. 688 - Using heterogeneous CPUID configurations, modulo APIC IDs, topology, etc... 689 may cause guest instability. 690 691:: 692 693 struct kvm_cpuid_entry { 694 __u32 function; 695 __u32 eax; 696 __u32 ebx; 697 __u32 ecx; 698 __u32 edx; 699 __u32 padding; 700 }; 701 702 /* for KVM_SET_CPUID */ 703 struct kvm_cpuid { 704 __u32 nent; 705 __u32 padding; 706 struct kvm_cpuid_entry entries[0]; 707 }; 708 709 7104.21 KVM_SET_SIGNAL_MASK 711------------------------ 712 713:Capability: basic 714:Architectures: all 715:Type: vcpu ioctl 716:Parameters: struct kvm_signal_mask (in) 717:Returns: 0 on success, -1 on error 718 719Defines which signals are blocked during execution of KVM_RUN. This 720signal mask temporarily overrides the threads signal mask. Any 721unblocked signal received (except SIGKILL and SIGSTOP, which retain 722their traditional behaviour) will cause KVM_RUN to return with -EINTR. 723 724Note the signal will only be delivered if not blocked by the original 725signal mask. 726 727:: 728 729 /* for KVM_SET_SIGNAL_MASK */ 730 struct kvm_signal_mask { 731 __u32 len; 732 __u8 sigset[0]; 733 }; 734 735 7364.22 KVM_GET_FPU 737---------------- 738 739:Capability: basic 740:Architectures: x86 741:Type: vcpu ioctl 742:Parameters: struct kvm_fpu (out) 743:Returns: 0 on success, -1 on error 744 745Reads the floating point state from the vcpu. 746 747:: 748 749 /* for KVM_GET_FPU and KVM_SET_FPU */ 750 struct kvm_fpu { 751 __u8 fpr[8][16]; 752 __u16 fcw; 753 __u16 fsw; 754 __u8 ftwx; /* in fxsave format */ 755 __u8 pad1; 756 __u16 last_opcode; 757 __u64 last_ip; 758 __u64 last_dp; 759 __u8 xmm[16][16]; 760 __u32 mxcsr; 761 __u32 pad2; 762 }; 763 764 7654.23 KVM_SET_FPU 766---------------- 767 768:Capability: basic 769:Architectures: x86 770:Type: vcpu ioctl 771:Parameters: struct kvm_fpu (in) 772:Returns: 0 on success, -1 on error 773 774Writes the floating point state to the vcpu. 775 776:: 777 778 /* for KVM_GET_FPU and KVM_SET_FPU */ 779 struct kvm_fpu { 780 __u8 fpr[8][16]; 781 __u16 fcw; 782 __u16 fsw; 783 __u8 ftwx; /* in fxsave format */ 784 __u8 pad1; 785 __u16 last_opcode; 786 __u64 last_ip; 787 __u64 last_dp; 788 __u8 xmm[16][16]; 789 __u32 mxcsr; 790 __u32 pad2; 791 }; 792 793 7944.24 KVM_CREATE_IRQCHIP 795----------------------- 796 797:Capability: KVM_CAP_IRQCHIP, KVM_CAP_S390_IRQCHIP (s390) 798:Architectures: x86, arm64, s390 799:Type: vm ioctl 800:Parameters: none 801:Returns: 0 on success, -1 on error 802 803Creates an interrupt controller model in the kernel. 804On x86, creates a virtual ioapic, a virtual PIC (two PICs, nested), and sets up 805future vcpus to have a local APIC. IRQ routing for GSIs 0-15 is set to both 806PIC and IOAPIC; GSI 16-23 only go to the IOAPIC. 807On arm64, a GICv2 is created. Any other GIC versions require the usage of 808KVM_CREATE_DEVICE, which also supports creating a GICv2. Using 809KVM_CREATE_DEVICE is preferred over KVM_CREATE_IRQCHIP for GICv2. 810On s390, a dummy irq routing table is created. 811 812Note that on s390 the KVM_CAP_S390_IRQCHIP vm capability needs to be enabled 813before KVM_CREATE_IRQCHIP can be used. 814 815 8164.25 KVM_IRQ_LINE 817----------------- 818 819:Capability: KVM_CAP_IRQCHIP 820:Architectures: x86, arm64 821:Type: vm ioctl 822:Parameters: struct kvm_irq_level 823:Returns: 0 on success, -1 on error 824 825Sets the level of a GSI input to the interrupt controller model in the kernel. 826On some architectures it is required that an interrupt controller model has 827been previously created with KVM_CREATE_IRQCHIP. Note that edge-triggered 828interrupts require the level to be set to 1 and then back to 0. 829 830On real hardware, interrupt pins can be active-low or active-high. This 831does not matter for the level field of struct kvm_irq_level: 1 always 832means active (asserted), 0 means inactive (deasserted). 833 834x86 allows the operating system to program the interrupt polarity 835(active-low/active-high) for level-triggered interrupts, and KVM used 836to consider the polarity. However, due to bitrot in the handling of 837active-low interrupts, the above convention is now valid on x86 too. 838This is signaled by KVM_CAP_X86_IOAPIC_POLARITY_IGNORED. Userspace 839should not present interrupts to the guest as active-low unless this 840capability is present (or unless it is not using the in-kernel irqchip, 841of course). 842 843 844arm64 can signal an interrupt either at the CPU level, or at the 845in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to 846use PPIs designated for specific cpus. The irq field is interpreted 847like this:: 848 849 bits: | 31 ... 28 | 27 ... 24 | 23 ... 16 | 15 ... 0 | 850 field: | vcpu2_index | irq_type | vcpu_index | irq_id | 851 852The irq_type field has the following values: 853 854- irq_type[0]: 855 out-of-kernel GIC: irq_id 0 is IRQ, irq_id 1 is FIQ 856- irq_type[1]: 857 in-kernel GIC: SPI, irq_id between 32 and 1019 (incl.) 858 (the vcpu_index field is ignored) 859- irq_type[2]: 860 in-kernel GIC: PPI, irq_id between 16 and 31 (incl.) 861 862(The irq_id field thus corresponds nicely to the IRQ ID in the ARM GIC specs) 863 864In both cases, level is used to assert/deassert the line. 865 866When KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 is supported, the target vcpu is 867identified as (256 * vcpu2_index + vcpu_index). Otherwise, vcpu2_index 868must be zero. 869 870Note that on arm64, the KVM_CAP_IRQCHIP capability only conditions 871injection of interrupts for the in-kernel irqchip. KVM_IRQ_LINE can always 872be used for a userspace interrupt controller. 873 874:: 875 876 struct kvm_irq_level { 877 union { 878 __u32 irq; /* GSI */ 879 __s32 status; /* not used for KVM_IRQ_LEVEL */ 880 }; 881 __u32 level; /* 0 or 1 */ 882 }; 883 884 8854.26 KVM_GET_IRQCHIP 886-------------------- 887 888:Capability: KVM_CAP_IRQCHIP 889:Architectures: x86 890:Type: vm ioctl 891:Parameters: struct kvm_irqchip (in/out) 892:Returns: 0 on success, -1 on error 893 894Reads the state of a kernel interrupt controller created with 895KVM_CREATE_IRQCHIP into a buffer provided by the caller. 896 897:: 898 899 struct kvm_irqchip { 900 __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */ 901 __u32 pad; 902 union { 903 char dummy[512]; /* reserving space */ 904 struct kvm_pic_state pic; 905 struct kvm_ioapic_state ioapic; 906 } chip; 907 }; 908 909 9104.27 KVM_SET_IRQCHIP 911-------------------- 912 913:Capability: KVM_CAP_IRQCHIP 914:Architectures: x86 915:Type: vm ioctl 916:Parameters: struct kvm_irqchip (in) 917:Returns: 0 on success, -1 on error 918 919Sets the state of a kernel interrupt controller created with 920KVM_CREATE_IRQCHIP from a buffer provided by the caller. 921 922:: 923 924 struct kvm_irqchip { 925 __u32 chip_id; /* 0 = PIC1, 1 = PIC2, 2 = IOAPIC */ 926 __u32 pad; 927 union { 928 char dummy[512]; /* reserving space */ 929 struct kvm_pic_state pic; 930 struct kvm_ioapic_state ioapic; 931 } chip; 932 }; 933 934 9354.28 KVM_XEN_HVM_CONFIG 936----------------------- 937 938:Capability: KVM_CAP_XEN_HVM 939:Architectures: x86 940:Type: vm ioctl 941:Parameters: struct kvm_xen_hvm_config (in) 942:Returns: 0 on success, -1 on error 943 944Sets the MSR that the Xen HVM guest uses to initialize its hypercall 945page, and provides the starting address and size of the hypercall 946blobs in userspace. When the guest writes the MSR, kvm copies one 947page of a blob (32- or 64-bit, depending on the vcpu mode) to guest 948memory. 949 950:: 951 952 struct kvm_xen_hvm_config { 953 __u32 flags; 954 __u32 msr; 955 __u64 blob_addr_32; 956 __u64 blob_addr_64; 957 __u8 blob_size_32; 958 __u8 blob_size_64; 959 __u8 pad2[30]; 960 }; 961 962If certain flags are returned from the KVM_CAP_XEN_HVM check, they may 963be set in the flags field of this ioctl: 964 965The KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL flag requests KVM to generate 966the contents of the hypercall page automatically; hypercalls will be 967intercepted and passed to userspace through KVM_EXIT_XEN. In this 968ase, all of the blob size and address fields must be zero. 969 970The KVM_XEN_HVM_CONFIG_EVTCHN_SEND flag indicates to KVM that userspace 971will always use the KVM_XEN_HVM_EVTCHN_SEND ioctl to deliver event 972channel interrupts rather than manipulating the guest's shared_info 973structures directly. This, in turn, may allow KVM to enable features 974such as intercepting the SCHEDOP_poll hypercall to accelerate PV 975spinlock operation for the guest. Userspace may still use the ioctl 976to deliver events if it was advertised, even if userspace does not 977send this indication that it will always do so 978 979No other flags are currently valid in the struct kvm_xen_hvm_config. 980 9814.29 KVM_GET_CLOCK 982------------------ 983 984:Capability: KVM_CAP_ADJUST_CLOCK 985:Architectures: x86 986:Type: vm ioctl 987:Parameters: struct kvm_clock_data (out) 988:Returns: 0 on success, -1 on error 989 990Gets the current timestamp of kvmclock as seen by the current guest. In 991conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios 992such as migration. 993 994When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the 995set of bits that KVM can return in struct kvm_clock_data's flag member. 996 997The following flags are defined: 998 999KVM_CLOCK_TSC_STABLE 1000 If set, the returned value is the exact kvmclock 1001 value seen by all VCPUs at the instant when KVM_GET_CLOCK was called. 1002 If clear, the returned value is simply CLOCK_MONOTONIC plus a constant 1003 offset; the offset can be modified with KVM_SET_CLOCK. KVM will try 1004 to make all VCPUs follow this clock, but the exact value read by each 1005 VCPU could differ, because the host TSC is not stable. 1006 1007KVM_CLOCK_REALTIME 1008 If set, the `realtime` field in the kvm_clock_data 1009 structure is populated with the value of the host's real time 1010 clocksource at the instant when KVM_GET_CLOCK was called. If clear, 1011 the `realtime` field does not contain a value. 1012 1013KVM_CLOCK_HOST_TSC 1014 If set, the `host_tsc` field in the kvm_clock_data 1015 structure is populated with the value of the host's timestamp counter (TSC) 1016 at the instant when KVM_GET_CLOCK was called. If clear, the `host_tsc` field 1017 does not contain a value. 1018 1019:: 1020 1021 struct kvm_clock_data { 1022 __u64 clock; /* kvmclock current value */ 1023 __u32 flags; 1024 __u32 pad0; 1025 __u64 realtime; 1026 __u64 host_tsc; 1027 __u32 pad[4]; 1028 }; 1029 1030 10314.30 KVM_SET_CLOCK 1032------------------ 1033 1034:Capability: KVM_CAP_ADJUST_CLOCK 1035:Architectures: x86 1036:Type: vm ioctl 1037:Parameters: struct kvm_clock_data (in) 1038:Returns: 0 on success, -1 on error 1039 1040Sets the current timestamp of kvmclock to the value specified in its parameter. 1041In conjunction with KVM_GET_CLOCK, it is used to ensure monotonicity on scenarios 1042such as migration. 1043 1044The following flags can be passed: 1045 1046KVM_CLOCK_REALTIME 1047 If set, KVM will compare the value of the `realtime` field 1048 with the value of the host's real time clocksource at the instant when 1049 KVM_SET_CLOCK was called. The difference in elapsed time is added to the final 1050 kvmclock value that will be provided to guests. 1051 1052Other flags returned by ``KVM_GET_CLOCK`` are accepted but ignored. 1053 1054:: 1055 1056 struct kvm_clock_data { 1057 __u64 clock; /* kvmclock current value */ 1058 __u32 flags; 1059 __u32 pad0; 1060 __u64 realtime; 1061 __u64 host_tsc; 1062 __u32 pad[4]; 1063 }; 1064 1065 10664.31 KVM_GET_VCPU_EVENTS 1067------------------------ 1068 1069:Capability: KVM_CAP_VCPU_EVENTS 1070:Extended by: KVM_CAP_INTR_SHADOW 1071:Architectures: x86, arm64 1072:Type: vcpu ioctl 1073:Parameters: struct kvm_vcpu_event (out) 1074:Returns: 0 on success, -1 on error 1075 1076X86: 1077^^^^ 1078 1079Gets currently pending exceptions, interrupts, and NMIs as well as related 1080states of the vcpu. 1081 1082:: 1083 1084 struct kvm_vcpu_events { 1085 struct { 1086 __u8 injected; 1087 __u8 nr; 1088 __u8 has_error_code; 1089 __u8 pending; 1090 __u32 error_code; 1091 } exception; 1092 struct { 1093 __u8 injected; 1094 __u8 nr; 1095 __u8 soft; 1096 __u8 shadow; 1097 } interrupt; 1098 struct { 1099 __u8 injected; 1100 __u8 pending; 1101 __u8 masked; 1102 __u8 pad; 1103 } nmi; 1104 __u32 sipi_vector; 1105 __u32 flags; 1106 struct { 1107 __u8 smm; 1108 __u8 pending; 1109 __u8 smm_inside_nmi; 1110 __u8 latched_init; 1111 } smi; 1112 __u8 reserved[27]; 1113 __u8 exception_has_payload; 1114 __u64 exception_payload; 1115 }; 1116 1117The following bits are defined in the flags field: 1118 1119- KVM_VCPUEVENT_VALID_SHADOW may be set to signal that 1120 interrupt.shadow contains a valid state. 1121 1122- KVM_VCPUEVENT_VALID_SMM may be set to signal that smi contains a 1123 valid state. 1124 1125- KVM_VCPUEVENT_VALID_PAYLOAD may be set to signal that the 1126 exception_has_payload, exception_payload, and exception.pending 1127 fields contain a valid state. This bit will be set whenever 1128 KVM_CAP_EXCEPTION_PAYLOAD is enabled. 1129 1130- KVM_VCPUEVENT_VALID_TRIPLE_FAULT may be set to signal that the 1131 triple_fault_pending field contains a valid state. This bit will 1132 be set whenever KVM_CAP_X86_TRIPLE_FAULT_EVENT is enabled. 1133 1134ARM64: 1135^^^^^^ 1136 1137If the guest accesses a device that is being emulated by the host kernel in 1138such a way that a real device would generate a physical SError, KVM may make 1139a virtual SError pending for that VCPU. This system error interrupt remains 1140pending until the guest takes the exception by unmasking PSTATE.A. 1141 1142Running the VCPU may cause it to take a pending SError, or make an access that 1143causes an SError to become pending. The event's description is only valid while 1144the VPCU is not running. 1145 1146This API provides a way to read and write the pending 'event' state that is not 1147visible to the guest. To save, restore or migrate a VCPU the struct representing 1148the state can be read then written using this GET/SET API, along with the other 1149guest-visible registers. It is not possible to 'cancel' an SError that has been 1150made pending. 1151 1152A device being emulated in user-space may also wish to generate an SError. To do 1153this the events structure can be populated by user-space. The current state 1154should be read first, to ensure no existing SError is pending. If an existing 1155SError is pending, the architecture's 'Multiple SError interrupts' rules should 1156be followed. (2.5.3 of DDI0587.a "ARM Reliability, Availability, and 1157Serviceability (RAS) Specification"). 1158 1159SError exceptions always have an ESR value. Some CPUs have the ability to 1160specify what the virtual SError's ESR value should be. These systems will 1161advertise KVM_CAP_ARM_INJECT_SERROR_ESR. In this case exception.has_esr will 1162always have a non-zero value when read, and the agent making an SError pending 1163should specify the ISS field in the lower 24 bits of exception.serror_esr. If 1164the system supports KVM_CAP_ARM_INJECT_SERROR_ESR, but user-space sets the events 1165with exception.has_esr as zero, KVM will choose an ESR. 1166 1167Specifying exception.has_esr on a system that does not support it will return 1168-EINVAL. Setting anything other than the lower 24bits of exception.serror_esr 1169will return -EINVAL. 1170 1171It is not possible to read back a pending external abort (injected via 1172KVM_SET_VCPU_EVENTS or otherwise) because such an exception is always delivered 1173directly to the virtual CPU). 1174 1175:: 1176 1177 struct kvm_vcpu_events { 1178 struct { 1179 __u8 serror_pending; 1180 __u8 serror_has_esr; 1181 __u8 ext_dabt_pending; 1182 /* Align it to 8 bytes */ 1183 __u8 pad[5]; 1184 __u64 serror_esr; 1185 } exception; 1186 __u32 reserved[12]; 1187 }; 1188 11894.32 KVM_SET_VCPU_EVENTS 1190------------------------ 1191 1192:Capability: KVM_CAP_VCPU_EVENTS 1193:Extended by: KVM_CAP_INTR_SHADOW 1194:Architectures: x86, arm64 1195:Type: vcpu ioctl 1196:Parameters: struct kvm_vcpu_event (in) 1197:Returns: 0 on success, -1 on error 1198 1199X86: 1200^^^^ 1201 1202Set pending exceptions, interrupts, and NMIs as well as related states of the 1203vcpu. 1204 1205See KVM_GET_VCPU_EVENTS for the data structure. 1206 1207Fields that may be modified asynchronously by running VCPUs can be excluded 1208from the update. These fields are nmi.pending, sipi_vector, smi.smm, 1209smi.pending. Keep the corresponding bits in the flags field cleared to 1210suppress overwriting the current in-kernel state. The bits are: 1211 1212=============================== ================================== 1213KVM_VCPUEVENT_VALID_NMI_PENDING transfer nmi.pending to the kernel 1214KVM_VCPUEVENT_VALID_SIPI_VECTOR transfer sipi_vector 1215KVM_VCPUEVENT_VALID_SMM transfer the smi sub-struct. 1216=============================== ================================== 1217 1218If KVM_CAP_INTR_SHADOW is available, KVM_VCPUEVENT_VALID_SHADOW can be set in 1219the flags field to signal that interrupt.shadow contains a valid state and 1220shall be written into the VCPU. 1221 1222KVM_VCPUEVENT_VALID_SMM can only be set if KVM_CAP_X86_SMM is available. 1223 1224If KVM_CAP_EXCEPTION_PAYLOAD is enabled, KVM_VCPUEVENT_VALID_PAYLOAD 1225can be set in the flags field to signal that the 1226exception_has_payload, exception_payload, and exception.pending fields 1227contain a valid state and shall be written into the VCPU. 1228 1229If KVM_CAP_X86_TRIPLE_FAULT_EVENT is enabled, KVM_VCPUEVENT_VALID_TRIPLE_FAULT 1230can be set in flags field to signal that the triple_fault field contains 1231a valid state and shall be written into the VCPU. 1232 1233ARM64: 1234^^^^^^ 1235 1236User space may need to inject several types of events to the guest. 1237 1238Set the pending SError exception state for this VCPU. It is not possible to 1239'cancel' an Serror that has been made pending. 1240 1241If the guest performed an access to I/O memory which could not be handled by 1242userspace, for example because of missing instruction syndrome decode 1243information or because there is no device mapped at the accessed IPA, then 1244userspace can ask the kernel to inject an external abort using the address 1245from the exiting fault on the VCPU. It is a programming error to set 1246ext_dabt_pending after an exit which was not either KVM_EXIT_MMIO or 1247KVM_EXIT_ARM_NISV. This feature is only available if the system supports 1248KVM_CAP_ARM_INJECT_EXT_DABT. This is a helper which provides commonality in 1249how userspace reports accesses for the above cases to guests, across different 1250userspace implementations. Nevertheless, userspace can still emulate all Arm 1251exceptions by manipulating individual registers using the KVM_SET_ONE_REG API. 1252 1253See KVM_GET_VCPU_EVENTS for the data structure. 1254 1255 12564.33 KVM_GET_DEBUGREGS 1257---------------------- 1258 1259:Capability: KVM_CAP_DEBUGREGS 1260:Architectures: x86 1261:Type: vm ioctl 1262:Parameters: struct kvm_debugregs (out) 1263:Returns: 0 on success, -1 on error 1264 1265Reads debug registers from the vcpu. 1266 1267:: 1268 1269 struct kvm_debugregs { 1270 __u64 db[4]; 1271 __u64 dr6; 1272 __u64 dr7; 1273 __u64 flags; 1274 __u64 reserved[9]; 1275 }; 1276 1277 12784.34 KVM_SET_DEBUGREGS 1279---------------------- 1280 1281:Capability: KVM_CAP_DEBUGREGS 1282:Architectures: x86 1283:Type: vm ioctl 1284:Parameters: struct kvm_debugregs (in) 1285:Returns: 0 on success, -1 on error 1286 1287Writes debug registers into the vcpu. 1288 1289See KVM_GET_DEBUGREGS for the data structure. The flags field is unused 1290yet and must be cleared on entry. 1291 1292 12934.35 KVM_SET_USER_MEMORY_REGION 1294------------------------------- 1295 1296:Capability: KVM_CAP_USER_MEMORY 1297:Architectures: all 1298:Type: vm ioctl 1299:Parameters: struct kvm_userspace_memory_region (in) 1300:Returns: 0 on success, -1 on error 1301 1302:: 1303 1304 struct kvm_userspace_memory_region { 1305 __u32 slot; 1306 __u32 flags; 1307 __u64 guest_phys_addr; 1308 __u64 memory_size; /* bytes */ 1309 __u64 userspace_addr; /* start of the userspace allocated memory */ 1310 }; 1311 1312 /* for kvm_userspace_memory_region::flags */ 1313 #define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0) 1314 #define KVM_MEM_READONLY (1UL << 1) 1315 1316This ioctl allows the user to create, modify or delete a guest physical 1317memory slot. Bits 0-15 of "slot" specify the slot id and this value 1318should be less than the maximum number of user memory slots supported per 1319VM. The maximum allowed slots can be queried using KVM_CAP_NR_MEMSLOTS. 1320Slots may not overlap in guest physical address space. 1321 1322If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of "slot" 1323specifies the address space which is being modified. They must be 1324less than the value that KVM_CHECK_EXTENSION returns for the 1325KVM_CAP_MULTI_ADDRESS_SPACE capability. Slots in separate address spaces 1326are unrelated; the restriction on overlapping slots only applies within 1327each address space. 1328 1329Deleting a slot is done by passing zero for memory_size. When changing 1330an existing slot, it may be moved in the guest physical memory space, 1331or its flags may be modified, but it may not be resized. 1332 1333Memory for the region is taken starting at the address denoted by the 1334field userspace_addr, which must point at user addressable memory for 1335the entire memory slot size. Any object may back this memory, including 1336anonymous memory, ordinary files, and hugetlbfs. 1337 1338On architectures that support a form of address tagging, userspace_addr must 1339be an untagged address. 1340 1341It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr 1342be identical. This allows large pages in the guest to be backed by large 1343pages in the host. 1344 1345The flags field supports two flags: KVM_MEM_LOG_DIRTY_PAGES and 1346KVM_MEM_READONLY. The former can be set to instruct KVM to keep track of 1347writes to memory within the slot. See KVM_GET_DIRTY_LOG ioctl to know how to 1348use it. The latter can be set, if KVM_CAP_READONLY_MEM capability allows it, 1349to make a new slot read-only. In this case, writes to this memory will be 1350posted to userspace as KVM_EXIT_MMIO exits. 1351 1352When the KVM_CAP_SYNC_MMU capability is available, changes in the backing of 1353the memory region are automatically reflected into the guest. For example, an 1354mmap() that affects the region will be made visible immediately. Another 1355example is madvise(MADV_DROP). 1356 1357Note: On arm64, a write generated by the page-table walker (to update 1358the Access and Dirty flags, for example) never results in a 1359KVM_EXIT_MMIO exit when the slot has the KVM_MEM_READONLY flag. This 1360is because KVM cannot provide the data that would be written by the 1361page-table walker, making it impossible to emulate the access. 1362Instead, an abort (data abort if the cause of the page-table update 1363was a load or a store, instruction abort if it was an instruction 1364fetch) is injected in the guest. 1365 13664.36 KVM_SET_TSS_ADDR 1367--------------------- 1368 1369:Capability: KVM_CAP_SET_TSS_ADDR 1370:Architectures: x86 1371:Type: vm ioctl 1372:Parameters: unsigned long tss_address (in) 1373:Returns: 0 on success, -1 on error 1374 1375This ioctl defines the physical address of a three-page region in the guest 1376physical address space. The region must be within the first 4GB of the 1377guest physical address space and must not conflict with any memory slot 1378or any mmio address. The guest may malfunction if it accesses this memory 1379region. 1380 1381This ioctl is required on Intel-based hosts. This is needed on Intel hardware 1382because of a quirk in the virtualization implementation (see the internals 1383documentation when it pops into existence). 1384 1385 13864.37 KVM_ENABLE_CAP 1387------------------- 1388 1389:Capability: KVM_CAP_ENABLE_CAP 1390:Architectures: mips, ppc, s390, x86 1391:Type: vcpu ioctl 1392:Parameters: struct kvm_enable_cap (in) 1393:Returns: 0 on success; -1 on error 1394 1395:Capability: KVM_CAP_ENABLE_CAP_VM 1396:Architectures: all 1397:Type: vm ioctl 1398:Parameters: struct kvm_enable_cap (in) 1399:Returns: 0 on success; -1 on error 1400 1401.. note:: 1402 1403 Not all extensions are enabled by default. Using this ioctl the application 1404 can enable an extension, making it available to the guest. 1405 1406On systems that do not support this ioctl, it always fails. On systems that 1407do support it, it only works for extensions that are supported for enablement. 1408 1409To check if a capability can be enabled, the KVM_CHECK_EXTENSION ioctl should 1410be used. 1411 1412:: 1413 1414 struct kvm_enable_cap { 1415 /* in */ 1416 __u32 cap; 1417 1418The capability that is supposed to get enabled. 1419 1420:: 1421 1422 __u32 flags; 1423 1424A bitfield indicating future enhancements. Has to be 0 for now. 1425 1426:: 1427 1428 __u64 args[4]; 1429 1430Arguments for enabling a feature. If a feature needs initial values to 1431function properly, this is the place to put them. 1432 1433:: 1434 1435 __u8 pad[64]; 1436 }; 1437 1438The vcpu ioctl should be used for vcpu-specific capabilities, the vm ioctl 1439for vm-wide capabilities. 1440 14414.38 KVM_GET_MP_STATE 1442--------------------- 1443 1444:Capability: KVM_CAP_MP_STATE 1445:Architectures: x86, s390, arm64, riscv 1446:Type: vcpu ioctl 1447:Parameters: struct kvm_mp_state (out) 1448:Returns: 0 on success; -1 on error 1449 1450:: 1451 1452 struct kvm_mp_state { 1453 __u32 mp_state; 1454 }; 1455 1456Returns the vcpu's current "multiprocessing state" (though also valid on 1457uniprocessor guests). 1458 1459Possible values are: 1460 1461 ========================== =============================================== 1462 KVM_MP_STATE_RUNNABLE the vcpu is currently running 1463 [x86,arm64,riscv] 1464 KVM_MP_STATE_UNINITIALIZED the vcpu is an application processor (AP) 1465 which has not yet received an INIT signal [x86] 1466 KVM_MP_STATE_INIT_RECEIVED the vcpu has received an INIT signal, and is 1467 now ready for a SIPI [x86] 1468 KVM_MP_STATE_HALTED the vcpu has executed a HLT instruction and 1469 is waiting for an interrupt [x86] 1470 KVM_MP_STATE_SIPI_RECEIVED the vcpu has just received a SIPI (vector 1471 accessible via KVM_GET_VCPU_EVENTS) [x86] 1472 KVM_MP_STATE_STOPPED the vcpu is stopped [s390,arm64,riscv] 1473 KVM_MP_STATE_CHECK_STOP the vcpu is in a special error state [s390] 1474 KVM_MP_STATE_OPERATING the vcpu is operating (running or halted) 1475 [s390] 1476 KVM_MP_STATE_LOAD the vcpu is in a special load/startup state 1477 [s390] 1478 KVM_MP_STATE_SUSPENDED the vcpu is in a suspend state and is waiting 1479 for a wakeup event [arm64] 1480 ========================== =============================================== 1481 1482On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an 1483in-kernel irqchip, the multiprocessing state must be maintained by userspace on 1484these architectures. 1485 1486For arm64: 1487^^^^^^^^^^ 1488 1489If a vCPU is in the KVM_MP_STATE_SUSPENDED state, KVM will emulate the 1490architectural execution of a WFI instruction. 1491 1492If a wakeup event is recognized, KVM will exit to userspace with a 1493KVM_SYSTEM_EVENT exit, where the event type is KVM_SYSTEM_EVENT_WAKEUP. If 1494userspace wants to honor the wakeup, it must set the vCPU's MP state to 1495KVM_MP_STATE_RUNNABLE. If it does not, KVM will continue to await a wakeup 1496event in subsequent calls to KVM_RUN. 1497 1498.. warning:: 1499 1500 If userspace intends to keep the vCPU in a SUSPENDED state, it is 1501 strongly recommended that userspace take action to suppress the 1502 wakeup event (such as masking an interrupt). Otherwise, subsequent 1503 calls to KVM_RUN will immediately exit with a KVM_SYSTEM_EVENT_WAKEUP 1504 event and inadvertently waste CPU cycles. 1505 1506 Additionally, if userspace takes action to suppress a wakeup event, 1507 it is strongly recommended that it also restores the vCPU to its 1508 original state when the vCPU is made RUNNABLE again. For example, 1509 if userspace masked a pending interrupt to suppress the wakeup, 1510 the interrupt should be unmasked before returning control to the 1511 guest. 1512 1513For riscv: 1514^^^^^^^^^^ 1515 1516The only states that are valid are KVM_MP_STATE_STOPPED and 1517KVM_MP_STATE_RUNNABLE which reflect if the vcpu is paused or not. 1518 15194.39 KVM_SET_MP_STATE 1520--------------------- 1521 1522:Capability: KVM_CAP_MP_STATE 1523:Architectures: x86, s390, arm64, riscv 1524:Type: vcpu ioctl 1525:Parameters: struct kvm_mp_state (in) 1526:Returns: 0 on success; -1 on error 1527 1528Sets the vcpu's current "multiprocessing state"; see KVM_GET_MP_STATE for 1529arguments. 1530 1531On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an 1532in-kernel irqchip, the multiprocessing state must be maintained by userspace on 1533these architectures. 1534 1535For arm64/riscv: 1536^^^^^^^^^^^^^^^^ 1537 1538The only states that are valid are KVM_MP_STATE_STOPPED and 1539KVM_MP_STATE_RUNNABLE which reflect if the vcpu should be paused or not. 1540 15414.40 KVM_SET_IDENTITY_MAP_ADDR 1542------------------------------ 1543 1544:Capability: KVM_CAP_SET_IDENTITY_MAP_ADDR 1545:Architectures: x86 1546:Type: vm ioctl 1547:Parameters: unsigned long identity (in) 1548:Returns: 0 on success, -1 on error 1549 1550This ioctl defines the physical address of a one-page region in the guest 1551physical address space. The region must be within the first 4GB of the 1552guest physical address space and must not conflict with any memory slot 1553or any mmio address. The guest may malfunction if it accesses this memory 1554region. 1555 1556Setting the address to 0 will result in resetting the address to its default 1557(0xfffbc000). 1558 1559This ioctl is required on Intel-based hosts. This is needed on Intel hardware 1560because of a quirk in the virtualization implementation (see the internals 1561documentation when it pops into existence). 1562 1563Fails if any VCPU has already been created. 1564 15654.41 KVM_SET_BOOT_CPU_ID 1566------------------------ 1567 1568:Capability: KVM_CAP_SET_BOOT_CPU_ID 1569:Architectures: x86 1570:Type: vm ioctl 1571:Parameters: unsigned long vcpu_id 1572:Returns: 0 on success, -1 on error 1573 1574Define which vcpu is the Bootstrap Processor (BSP). Values are the same 1575as the vcpu id in KVM_CREATE_VCPU. If this ioctl is not called, the default 1576is vcpu 0. This ioctl has to be called before vcpu creation, 1577otherwise it will return EBUSY error. 1578 1579 15804.42 KVM_GET_XSAVE 1581------------------ 1582 1583:Capability: KVM_CAP_XSAVE 1584:Architectures: x86 1585:Type: vcpu ioctl 1586:Parameters: struct kvm_xsave (out) 1587:Returns: 0 on success, -1 on error 1588 1589 1590:: 1591 1592 struct kvm_xsave { 1593 __u32 region[1024]; 1594 __u32 extra[0]; 1595 }; 1596 1597This ioctl would copy current vcpu's xsave struct to the userspace. 1598 1599 16004.43 KVM_SET_XSAVE 1601------------------ 1602 1603:Capability: KVM_CAP_XSAVE and KVM_CAP_XSAVE2 1604:Architectures: x86 1605:Type: vcpu ioctl 1606:Parameters: struct kvm_xsave (in) 1607:Returns: 0 on success, -1 on error 1608 1609:: 1610 1611 1612 struct kvm_xsave { 1613 __u32 region[1024]; 1614 __u32 extra[0]; 1615 }; 1616 1617This ioctl would copy userspace's xsave struct to the kernel. It copies 1618as many bytes as are returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2), 1619when invoked on the vm file descriptor. The size value returned by 1620KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2) will always be at least 4096. 1621Currently, it is only greater than 4096 if a dynamic feature has been 1622enabled with ``arch_prctl()``, but this may change in the future. 1623 1624The offsets of the state save areas in struct kvm_xsave follow the 1625contents of CPUID leaf 0xD on the host. 1626 1627 16284.44 KVM_GET_XCRS 1629----------------- 1630 1631:Capability: KVM_CAP_XCRS 1632:Architectures: x86 1633:Type: vcpu ioctl 1634:Parameters: struct kvm_xcrs (out) 1635:Returns: 0 on success, -1 on error 1636 1637:: 1638 1639 struct kvm_xcr { 1640 __u32 xcr; 1641 __u32 reserved; 1642 __u64 value; 1643 }; 1644 1645 struct kvm_xcrs { 1646 __u32 nr_xcrs; 1647 __u32 flags; 1648 struct kvm_xcr xcrs[KVM_MAX_XCRS]; 1649 __u64 padding[16]; 1650 }; 1651 1652This ioctl would copy current vcpu's xcrs to the userspace. 1653 1654 16554.45 KVM_SET_XCRS 1656----------------- 1657 1658:Capability: KVM_CAP_XCRS 1659:Architectures: x86 1660:Type: vcpu ioctl 1661:Parameters: struct kvm_xcrs (in) 1662:Returns: 0 on success, -1 on error 1663 1664:: 1665 1666 struct kvm_xcr { 1667 __u32 xcr; 1668 __u32 reserved; 1669 __u64 value; 1670 }; 1671 1672 struct kvm_xcrs { 1673 __u32 nr_xcrs; 1674 __u32 flags; 1675 struct kvm_xcr xcrs[KVM_MAX_XCRS]; 1676 __u64 padding[16]; 1677 }; 1678 1679This ioctl would set vcpu's xcr to the value userspace specified. 1680 1681 16824.46 KVM_GET_SUPPORTED_CPUID 1683---------------------------- 1684 1685:Capability: KVM_CAP_EXT_CPUID 1686:Architectures: x86 1687:Type: system ioctl 1688:Parameters: struct kvm_cpuid2 (in/out) 1689:Returns: 0 on success, -1 on error 1690 1691:: 1692 1693 struct kvm_cpuid2 { 1694 __u32 nent; 1695 __u32 padding; 1696 struct kvm_cpuid_entry2 entries[0]; 1697 }; 1698 1699 #define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0) 1700 #define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1) /* deprecated */ 1701 #define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2) /* deprecated */ 1702 1703 struct kvm_cpuid_entry2 { 1704 __u32 function; 1705 __u32 index; 1706 __u32 flags; 1707 __u32 eax; 1708 __u32 ebx; 1709 __u32 ecx; 1710 __u32 edx; 1711 __u32 padding[3]; 1712 }; 1713 1714This ioctl returns x86 cpuid features which are supported by both the 1715hardware and kvm in its default configuration. Userspace can use the 1716information returned by this ioctl to construct cpuid information (for 1717KVM_SET_CPUID2) that is consistent with hardware, kernel, and 1718userspace capabilities, and with user requirements (for example, the 1719user may wish to constrain cpuid to emulate older hardware, or for 1720feature consistency across a cluster). 1721 1722Dynamically-enabled feature bits need to be requested with 1723``arch_prctl()`` before calling this ioctl. Feature bits that have not 1724been requested are excluded from the result. 1725 1726Note that certain capabilities, such as KVM_CAP_X86_DISABLE_EXITS, may 1727expose cpuid features (e.g. MONITOR) which are not supported by kvm in 1728its default configuration. If userspace enables such capabilities, it 1729is responsible for modifying the results of this ioctl appropriately. 1730 1731Userspace invokes KVM_GET_SUPPORTED_CPUID by passing a kvm_cpuid2 structure 1732with the 'nent' field indicating the number of entries in the variable-size 1733array 'entries'. If the number of entries is too low to describe the cpu 1734capabilities, an error (E2BIG) is returned. If the number is too high, 1735the 'nent' field is adjusted and an error (ENOMEM) is returned. If the 1736number is just right, the 'nent' field is adjusted to the number of valid 1737entries in the 'entries' array, which is then filled. 1738 1739The entries returned are the host cpuid as returned by the cpuid instruction, 1740with unknown or unsupported features masked out. Some features (for example, 1741x2apic), may not be present in the host cpu, but are exposed by kvm if it can 1742emulate them efficiently. The fields in each entry are defined as follows: 1743 1744 function: 1745 the eax value used to obtain the entry 1746 1747 index: 1748 the ecx value used to obtain the entry (for entries that are 1749 affected by ecx) 1750 1751 flags: 1752 an OR of zero or more of the following: 1753 1754 KVM_CPUID_FLAG_SIGNIFCANT_INDEX: 1755 if the index field is valid 1756 1757 eax, ebx, ecx, edx: 1758 the values returned by the cpuid instruction for 1759 this function/index combination 1760 1761The TSC deadline timer feature (CPUID leaf 1, ecx[24]) is always returned 1762as false, since the feature depends on KVM_CREATE_IRQCHIP for local APIC 1763support. Instead it is reported via:: 1764 1765 ioctl(KVM_CHECK_EXTENSION, KVM_CAP_TSC_DEADLINE_TIMER) 1766 1767if that returns true and you use KVM_CREATE_IRQCHIP, or if you emulate the 1768feature in userspace, then you can enable the feature for KVM_SET_CPUID2. 1769 1770 17714.47 KVM_PPC_GET_PVINFO 1772----------------------- 1773 1774:Capability: KVM_CAP_PPC_GET_PVINFO 1775:Architectures: ppc 1776:Type: vm ioctl 1777:Parameters: struct kvm_ppc_pvinfo (out) 1778:Returns: 0 on success, !0 on error 1779 1780:: 1781 1782 struct kvm_ppc_pvinfo { 1783 __u32 flags; 1784 __u32 hcall[4]; 1785 __u8 pad[108]; 1786 }; 1787 1788This ioctl fetches PV specific information that need to be passed to the guest 1789using the device tree or other means from vm context. 1790 1791The hcall array defines 4 instructions that make up a hypercall. 1792 1793If any additional field gets added to this structure later on, a bit for that 1794additional piece of information will be set in the flags bitmap. 1795 1796The flags bitmap is defined as:: 1797 1798 /* the host supports the ePAPR idle hcall 1799 #define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) 1800 18014.52 KVM_SET_GSI_ROUTING 1802------------------------ 1803 1804:Capability: KVM_CAP_IRQ_ROUTING 1805:Architectures: x86 s390 arm64 1806:Type: vm ioctl 1807:Parameters: struct kvm_irq_routing (in) 1808:Returns: 0 on success, -1 on error 1809 1810Sets the GSI routing table entries, overwriting any previously set entries. 1811 1812On arm64, GSI routing has the following limitation: 1813 1814- GSI routing does not apply to KVM_IRQ_LINE but only to KVM_IRQFD. 1815 1816:: 1817 1818 struct kvm_irq_routing { 1819 __u32 nr; 1820 __u32 flags; 1821 struct kvm_irq_routing_entry entries[0]; 1822 }; 1823 1824No flags are specified so far, the corresponding field must be set to zero. 1825 1826:: 1827 1828 struct kvm_irq_routing_entry { 1829 __u32 gsi; 1830 __u32 type; 1831 __u32 flags; 1832 __u32 pad; 1833 union { 1834 struct kvm_irq_routing_irqchip irqchip; 1835 struct kvm_irq_routing_msi msi; 1836 struct kvm_irq_routing_s390_adapter adapter; 1837 struct kvm_irq_routing_hv_sint hv_sint; 1838 struct kvm_irq_routing_xen_evtchn xen_evtchn; 1839 __u32 pad[8]; 1840 } u; 1841 }; 1842 1843 /* gsi routing entry types */ 1844 #define KVM_IRQ_ROUTING_IRQCHIP 1 1845 #define KVM_IRQ_ROUTING_MSI 2 1846 #define KVM_IRQ_ROUTING_S390_ADAPTER 3 1847 #define KVM_IRQ_ROUTING_HV_SINT 4 1848 #define KVM_IRQ_ROUTING_XEN_EVTCHN 5 1849 1850flags: 1851 1852- KVM_MSI_VALID_DEVID: used along with KVM_IRQ_ROUTING_MSI routing entry 1853 type, specifies that the devid field contains a valid value. The per-VM 1854 KVM_CAP_MSI_DEVID capability advertises the requirement to provide 1855 the device ID. If this capability is not available, userspace should 1856 never set the KVM_MSI_VALID_DEVID flag as the ioctl might fail. 1857- zero otherwise 1858 1859:: 1860 1861 struct kvm_irq_routing_irqchip { 1862 __u32 irqchip; 1863 __u32 pin; 1864 }; 1865 1866 struct kvm_irq_routing_msi { 1867 __u32 address_lo; 1868 __u32 address_hi; 1869 __u32 data; 1870 union { 1871 __u32 pad; 1872 __u32 devid; 1873 }; 1874 }; 1875 1876If KVM_MSI_VALID_DEVID is set, devid contains a unique device identifier 1877for the device that wrote the MSI message. For PCI, this is usually a 1878BFD identifier in the lower 16 bits. 1879 1880On x86, address_hi is ignored unless the KVM_X2APIC_API_USE_32BIT_IDS 1881feature of KVM_CAP_X2APIC_API capability is enabled. If it is enabled, 1882address_hi bits 31-8 provide bits 31-8 of the destination id. Bits 7-0 of 1883address_hi must be zero. 1884 1885:: 1886 1887 struct kvm_irq_routing_s390_adapter { 1888 __u64 ind_addr; 1889 __u64 summary_addr; 1890 __u64 ind_offset; 1891 __u32 summary_offset; 1892 __u32 adapter_id; 1893 }; 1894 1895 struct kvm_irq_routing_hv_sint { 1896 __u32 vcpu; 1897 __u32 sint; 1898 }; 1899 1900 struct kvm_irq_routing_xen_evtchn { 1901 __u32 port; 1902 __u32 vcpu; 1903 __u32 priority; 1904 }; 1905 1906 1907When KVM_CAP_XEN_HVM includes the KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL bit 1908in its indication of supported features, routing to Xen event channels 1909is supported. Although the priority field is present, only the value 1910KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL is supported, which means delivery by 19112 level event channels. FIFO event channel support may be added in 1912the future. 1913 1914 19154.55 KVM_SET_TSC_KHZ 1916-------------------- 1917 1918:Capability: KVM_CAP_TSC_CONTROL / KVM_CAP_VM_TSC_CONTROL 1919:Architectures: x86 1920:Type: vcpu ioctl / vm ioctl 1921:Parameters: virtual tsc_khz 1922:Returns: 0 on success, -1 on error 1923 1924Specifies the tsc frequency for the virtual machine. The unit of the 1925frequency is KHz. 1926 1927If the KVM_CAP_VM_TSC_CONTROL capability is advertised, this can also 1928be used as a vm ioctl to set the initial tsc frequency of subsequently 1929created vCPUs. 1930 19314.56 KVM_GET_TSC_KHZ 1932-------------------- 1933 1934:Capability: KVM_CAP_GET_TSC_KHZ / KVM_CAP_VM_TSC_CONTROL 1935:Architectures: x86 1936:Type: vcpu ioctl / vm ioctl 1937:Parameters: none 1938:Returns: virtual tsc-khz on success, negative value on error 1939 1940Returns the tsc frequency of the guest. The unit of the return value is 1941KHz. If the host has unstable tsc this ioctl returns -EIO instead as an 1942error. 1943 1944 19454.57 KVM_GET_LAPIC 1946------------------ 1947 1948:Capability: KVM_CAP_IRQCHIP 1949:Architectures: x86 1950:Type: vcpu ioctl 1951:Parameters: struct kvm_lapic_state (out) 1952:Returns: 0 on success, -1 on error 1953 1954:: 1955 1956 #define KVM_APIC_REG_SIZE 0x400 1957 struct kvm_lapic_state { 1958 char regs[KVM_APIC_REG_SIZE]; 1959 }; 1960 1961Reads the Local APIC registers and copies them into the input argument. The 1962data format and layout are the same as documented in the architecture manual. 1963 1964If KVM_X2APIC_API_USE_32BIT_IDS feature of KVM_CAP_X2APIC_API is 1965enabled, then the format of APIC_ID register depends on the APIC mode 1966(reported by MSR_IA32_APICBASE) of its VCPU. x2APIC stores APIC ID in 1967the APIC_ID register (bytes 32-35). xAPIC only allows an 8-bit APIC ID 1968which is stored in bits 31-24 of the APIC register, or equivalently in 1969byte 35 of struct kvm_lapic_state's regs field. KVM_GET_LAPIC must then 1970be called after MSR_IA32_APICBASE has been set with KVM_SET_MSR. 1971 1972If KVM_X2APIC_API_USE_32BIT_IDS feature is disabled, struct kvm_lapic_state 1973always uses xAPIC format. 1974 1975 19764.58 KVM_SET_LAPIC 1977------------------ 1978 1979:Capability: KVM_CAP_IRQCHIP 1980:Architectures: x86 1981:Type: vcpu ioctl 1982:Parameters: struct kvm_lapic_state (in) 1983:Returns: 0 on success, -1 on error 1984 1985:: 1986 1987 #define KVM_APIC_REG_SIZE 0x400 1988 struct kvm_lapic_state { 1989 char regs[KVM_APIC_REG_SIZE]; 1990 }; 1991 1992Copies the input argument into the Local APIC registers. The data format 1993and layout are the same as documented in the architecture manual. 1994 1995The format of the APIC ID register (bytes 32-35 of struct kvm_lapic_state's 1996regs field) depends on the state of the KVM_CAP_X2APIC_API capability. 1997See the note in KVM_GET_LAPIC. 1998 1999 20004.59 KVM_IOEVENTFD 2001------------------ 2002 2003:Capability: KVM_CAP_IOEVENTFD 2004:Architectures: all 2005:Type: vm ioctl 2006:Parameters: struct kvm_ioeventfd (in) 2007:Returns: 0 on success, !0 on error 2008 2009This ioctl attaches or detaches an ioeventfd to a legal pio/mmio address 2010within the guest. A guest write in the registered address will signal the 2011provided event instead of triggering an exit. 2012 2013:: 2014 2015 struct kvm_ioeventfd { 2016 __u64 datamatch; 2017 __u64 addr; /* legal pio/mmio address */ 2018 __u32 len; /* 0, 1, 2, 4, or 8 bytes */ 2019 __s32 fd; 2020 __u32 flags; 2021 __u8 pad[36]; 2022 }; 2023 2024For the special case of virtio-ccw devices on s390, the ioevent is matched 2025to a subchannel/virtqueue tuple instead. 2026 2027The following flags are defined:: 2028 2029 #define KVM_IOEVENTFD_FLAG_DATAMATCH (1 << kvm_ioeventfd_flag_nr_datamatch) 2030 #define KVM_IOEVENTFD_FLAG_PIO (1 << kvm_ioeventfd_flag_nr_pio) 2031 #define KVM_IOEVENTFD_FLAG_DEASSIGN (1 << kvm_ioeventfd_flag_nr_deassign) 2032 #define KVM_IOEVENTFD_FLAG_VIRTIO_CCW_NOTIFY \ 2033 (1 << kvm_ioeventfd_flag_nr_virtio_ccw_notify) 2034 2035If datamatch flag is set, the event will be signaled only if the written value 2036to the registered address is equal to datamatch in struct kvm_ioeventfd. 2037 2038For virtio-ccw devices, addr contains the subchannel id and datamatch the 2039virtqueue index. 2040 2041With KVM_CAP_IOEVENTFD_ANY_LENGTH, a zero length ioeventfd is allowed, and 2042the kernel will ignore the length of guest write and may get a faster vmexit. 2043The speedup may only apply to specific architectures, but the ioeventfd will 2044work anyway. 2045 20464.60 KVM_DIRTY_TLB 2047------------------ 2048 2049:Capability: KVM_CAP_SW_TLB 2050:Architectures: ppc 2051:Type: vcpu ioctl 2052:Parameters: struct kvm_dirty_tlb (in) 2053:Returns: 0 on success, -1 on error 2054 2055:: 2056 2057 struct kvm_dirty_tlb { 2058 __u64 bitmap; 2059 __u32 num_dirty; 2060 }; 2061 2062This must be called whenever userspace has changed an entry in the shared 2063TLB, prior to calling KVM_RUN on the associated vcpu. 2064 2065The "bitmap" field is the userspace address of an array. This array 2066consists of a number of bits, equal to the total number of TLB entries as 2067determined by the last successful call to KVM_CONFIG_TLB, rounded up to the 2068nearest multiple of 64. 2069 2070Each bit corresponds to one TLB entry, ordered the same as in the shared TLB 2071array. 2072 2073The array is little-endian: the bit 0 is the least significant bit of the 2074first byte, bit 8 is the least significant bit of the second byte, etc. 2075This avoids any complications with differing word sizes. 2076 2077The "num_dirty" field is a performance hint for KVM to determine whether it 2078should skip processing the bitmap and just invalidate everything. It must 2079be set to the number of set bits in the bitmap. 2080 2081 20824.62 KVM_CREATE_SPAPR_TCE 2083------------------------- 2084 2085:Capability: KVM_CAP_SPAPR_TCE 2086:Architectures: powerpc 2087:Type: vm ioctl 2088:Parameters: struct kvm_create_spapr_tce (in) 2089:Returns: file descriptor for manipulating the created TCE table 2090 2091This creates a virtual TCE (translation control entry) table, which 2092is an IOMMU for PAPR-style virtual I/O. It is used to translate 2093logical addresses used in virtual I/O into guest physical addresses, 2094and provides a scatter/gather capability for PAPR virtual I/O. 2095 2096:: 2097 2098 /* for KVM_CAP_SPAPR_TCE */ 2099 struct kvm_create_spapr_tce { 2100 __u64 liobn; 2101 __u32 window_size; 2102 }; 2103 2104The liobn field gives the logical IO bus number for which to create a 2105TCE table. The window_size field specifies the size of the DMA window 2106which this TCE table will translate - the table will contain one 64 2107bit TCE entry for every 4kiB of the DMA window. 2108 2109When the guest issues an H_PUT_TCE hcall on a liobn for which a TCE 2110table has been created using this ioctl(), the kernel will handle it 2111in real mode, updating the TCE table. H_PUT_TCE calls for other 2112liobns will cause a vm exit and must be handled by userspace. 2113 2114The return value is a file descriptor which can be passed to mmap(2) 2115to map the created TCE table into userspace. This lets userspace read 2116the entries written by kernel-handled H_PUT_TCE calls, and also lets 2117userspace update the TCE table directly which is useful in some 2118circumstances. 2119 2120 21214.63 KVM_ALLOCATE_RMA 2122--------------------- 2123 2124:Capability: KVM_CAP_PPC_RMA 2125:Architectures: powerpc 2126:Type: vm ioctl 2127:Parameters: struct kvm_allocate_rma (out) 2128:Returns: file descriptor for mapping the allocated RMA 2129 2130This allocates a Real Mode Area (RMA) from the pool allocated at boot 2131time by the kernel. An RMA is a physically-contiguous, aligned region 2132of memory used on older POWER processors to provide the memory which 2133will be accessed by real-mode (MMU off) accesses in a KVM guest. 2134POWER processors support a set of sizes for the RMA that usually 2135includes 64MB, 128MB, 256MB and some larger powers of two. 2136 2137:: 2138 2139 /* for KVM_ALLOCATE_RMA */ 2140 struct kvm_allocate_rma { 2141 __u64 rma_size; 2142 }; 2143 2144The return value is a file descriptor which can be passed to mmap(2) 2145to map the allocated RMA into userspace. The mapped area can then be 2146passed to the KVM_SET_USER_MEMORY_REGION ioctl to establish it as the 2147RMA for a virtual machine. The size of the RMA in bytes (which is 2148fixed at host kernel boot time) is returned in the rma_size field of 2149the argument structure. 2150 2151The KVM_CAP_PPC_RMA capability is 1 or 2 if the KVM_ALLOCATE_RMA ioctl 2152is supported; 2 if the processor requires all virtual machines to have 2153an RMA, or 1 if the processor can use an RMA but doesn't require it, 2154because it supports the Virtual RMA (VRMA) facility. 2155 2156 21574.64 KVM_NMI 2158------------ 2159 2160:Capability: KVM_CAP_USER_NMI 2161:Architectures: x86 2162:Type: vcpu ioctl 2163:Parameters: none 2164:Returns: 0 on success, -1 on error 2165 2166Queues an NMI on the thread's vcpu. Note this is well defined only 2167when KVM_CREATE_IRQCHIP has not been called, since this is an interface 2168between the virtual cpu core and virtual local APIC. After KVM_CREATE_IRQCHIP 2169has been called, this interface is completely emulated within the kernel. 2170 2171To use this to emulate the LINT1 input with KVM_CREATE_IRQCHIP, use the 2172following algorithm: 2173 2174 - pause the vcpu 2175 - read the local APIC's state (KVM_GET_LAPIC) 2176 - check whether changing LINT1 will queue an NMI (see the LVT entry for LINT1) 2177 - if so, issue KVM_NMI 2178 - resume the vcpu 2179 2180Some guests configure the LINT1 NMI input to cause a panic, aiding in 2181debugging. 2182 2183 21844.65 KVM_S390_UCAS_MAP 2185---------------------- 2186 2187:Capability: KVM_CAP_S390_UCONTROL 2188:Architectures: s390 2189:Type: vcpu ioctl 2190:Parameters: struct kvm_s390_ucas_mapping (in) 2191:Returns: 0 in case of success 2192 2193The parameter is defined like this:: 2194 2195 struct kvm_s390_ucas_mapping { 2196 __u64 user_addr; 2197 __u64 vcpu_addr; 2198 __u64 length; 2199 }; 2200 2201This ioctl maps the memory at "user_addr" with the length "length" to 2202the vcpu's address space starting at "vcpu_addr". All parameters need to 2203be aligned by 1 megabyte. 2204 2205 22064.66 KVM_S390_UCAS_UNMAP 2207------------------------ 2208 2209:Capability: KVM_CAP_S390_UCONTROL 2210:Architectures: s390 2211:Type: vcpu ioctl 2212:Parameters: struct kvm_s390_ucas_mapping (in) 2213:Returns: 0 in case of success 2214 2215The parameter is defined like this:: 2216 2217 struct kvm_s390_ucas_mapping { 2218 __u64 user_addr; 2219 __u64 vcpu_addr; 2220 __u64 length; 2221 }; 2222 2223This ioctl unmaps the memory in the vcpu's address space starting at 2224"vcpu_addr" with the length "length". The field "user_addr" is ignored. 2225All parameters need to be aligned by 1 megabyte. 2226 2227 22284.67 KVM_S390_VCPU_FAULT 2229------------------------ 2230 2231:Capability: KVM_CAP_S390_UCONTROL 2232:Architectures: s390 2233:Type: vcpu ioctl 2234:Parameters: vcpu absolute address (in) 2235:Returns: 0 in case of success 2236 2237This call creates a page table entry on the virtual cpu's address space 2238(for user controlled virtual machines) or the virtual machine's address 2239space (for regular virtual machines). This only works for minor faults, 2240thus it's recommended to access subject memory page via the user page 2241table upfront. This is useful to handle validity intercepts for user 2242controlled virtual machines to fault in the virtual cpu's lowcore pages 2243prior to calling the KVM_RUN ioctl. 2244 2245 22464.68 KVM_SET_ONE_REG 2247-------------------- 2248 2249:Capability: KVM_CAP_ONE_REG 2250:Architectures: all 2251:Type: vcpu ioctl 2252:Parameters: struct kvm_one_reg (in) 2253:Returns: 0 on success, negative value on failure 2254 2255Errors: 2256 2257 ====== ============================================================ 2258 ENOENT no such register 2259 EINVAL invalid register ID, or no such register or used with VMs in 2260 protected virtualization mode on s390 2261 EPERM (arm64) register access not allowed before vcpu finalization 2262 ====== ============================================================ 2263 2264(These error codes are indicative only: do not rely on a specific error 2265code being returned in a specific situation.) 2266 2267:: 2268 2269 struct kvm_one_reg { 2270 __u64 id; 2271 __u64 addr; 2272 }; 2273 2274Using this ioctl, a single vcpu register can be set to a specific value 2275defined by user space with the passed in struct kvm_one_reg, where id 2276refers to the register identifier as described below and addr is a pointer 2277to a variable with the respective size. There can be architecture agnostic 2278and architecture specific registers. Each have their own range of operation 2279and their own constants and width. To keep track of the implemented 2280registers, find a list below: 2281 2282 ======= =============================== ============ 2283 Arch Register Width (bits) 2284 ======= =============================== ============ 2285 PPC KVM_REG_PPC_HIOR 64 2286 PPC KVM_REG_PPC_IAC1 64 2287 PPC KVM_REG_PPC_IAC2 64 2288 PPC KVM_REG_PPC_IAC3 64 2289 PPC KVM_REG_PPC_IAC4 64 2290 PPC KVM_REG_PPC_DAC1 64 2291 PPC KVM_REG_PPC_DAC2 64 2292 PPC KVM_REG_PPC_DABR 64 2293 PPC KVM_REG_PPC_DSCR 64 2294 PPC KVM_REG_PPC_PURR 64 2295 PPC KVM_REG_PPC_SPURR 64 2296 PPC KVM_REG_PPC_DAR 64 2297 PPC KVM_REG_PPC_DSISR 32 2298 PPC KVM_REG_PPC_AMR 64 2299 PPC KVM_REG_PPC_UAMOR 64 2300 PPC KVM_REG_PPC_MMCR0 64 2301 PPC KVM_REG_PPC_MMCR1 64 2302 PPC KVM_REG_PPC_MMCRA 64 2303 PPC KVM_REG_PPC_MMCR2 64 2304 PPC KVM_REG_PPC_MMCRS 64 2305 PPC KVM_REG_PPC_MMCR3 64 2306 PPC KVM_REG_PPC_SIAR 64 2307 PPC KVM_REG_PPC_SDAR 64 2308 PPC KVM_REG_PPC_SIER 64 2309 PPC KVM_REG_PPC_SIER2 64 2310 PPC KVM_REG_PPC_SIER3 64 2311 PPC KVM_REG_PPC_PMC1 32 2312 PPC KVM_REG_PPC_PMC2 32 2313 PPC KVM_REG_PPC_PMC3 32 2314 PPC KVM_REG_PPC_PMC4 32 2315 PPC KVM_REG_PPC_PMC5 32 2316 PPC KVM_REG_PPC_PMC6 32 2317 PPC KVM_REG_PPC_PMC7 32 2318 PPC KVM_REG_PPC_PMC8 32 2319 PPC KVM_REG_PPC_FPR0 64 2320 ... 2321 PPC KVM_REG_PPC_FPR31 64 2322 PPC KVM_REG_PPC_VR0 128 2323 ... 2324 PPC KVM_REG_PPC_VR31 128 2325 PPC KVM_REG_PPC_VSR0 128 2326 ... 2327 PPC KVM_REG_PPC_VSR31 128 2328 PPC KVM_REG_PPC_FPSCR 64 2329 PPC KVM_REG_PPC_VSCR 32 2330 PPC KVM_REG_PPC_VPA_ADDR 64 2331 PPC KVM_REG_PPC_VPA_SLB 128 2332 PPC KVM_REG_PPC_VPA_DTL 128 2333 PPC KVM_REG_PPC_EPCR 32 2334 PPC KVM_REG_PPC_EPR 32 2335 PPC KVM_REG_PPC_TCR 32 2336 PPC KVM_REG_PPC_TSR 32 2337 PPC KVM_REG_PPC_OR_TSR 32 2338 PPC KVM_REG_PPC_CLEAR_TSR 32 2339 PPC KVM_REG_PPC_MAS0 32 2340 PPC KVM_REG_PPC_MAS1 32 2341 PPC KVM_REG_PPC_MAS2 64 2342 PPC KVM_REG_PPC_MAS7_3 64 2343 PPC KVM_REG_PPC_MAS4 32 2344 PPC KVM_REG_PPC_MAS6 32 2345 PPC KVM_REG_PPC_MMUCFG 32 2346 PPC KVM_REG_PPC_TLB0CFG 32 2347 PPC KVM_REG_PPC_TLB1CFG 32 2348 PPC KVM_REG_PPC_TLB2CFG 32 2349 PPC KVM_REG_PPC_TLB3CFG 32 2350 PPC KVM_REG_PPC_TLB0PS 32 2351 PPC KVM_REG_PPC_TLB1PS 32 2352 PPC KVM_REG_PPC_TLB2PS 32 2353 PPC KVM_REG_PPC_TLB3PS 32 2354 PPC KVM_REG_PPC_EPTCFG 32 2355 PPC KVM_REG_PPC_ICP_STATE 64 2356 PPC KVM_REG_PPC_VP_STATE 128 2357 PPC KVM_REG_PPC_TB_OFFSET 64 2358 PPC KVM_REG_PPC_SPMC1 32 2359 PPC KVM_REG_PPC_SPMC2 32 2360 PPC KVM_REG_PPC_IAMR 64 2361 PPC KVM_REG_PPC_TFHAR 64 2362 PPC KVM_REG_PPC_TFIAR 64 2363 PPC KVM_REG_PPC_TEXASR 64 2364 PPC KVM_REG_PPC_FSCR 64 2365 PPC KVM_REG_PPC_PSPB 32 2366 PPC KVM_REG_PPC_EBBHR 64 2367 PPC KVM_REG_PPC_EBBRR 64 2368 PPC KVM_REG_PPC_BESCR 64 2369 PPC KVM_REG_PPC_TAR 64 2370 PPC KVM_REG_PPC_DPDES 64 2371 PPC KVM_REG_PPC_DAWR 64 2372 PPC KVM_REG_PPC_DAWRX 64 2373 PPC KVM_REG_PPC_CIABR 64 2374 PPC KVM_REG_PPC_IC 64 2375 PPC KVM_REG_PPC_VTB 64 2376 PPC KVM_REG_PPC_CSIGR 64 2377 PPC KVM_REG_PPC_TACR 64 2378 PPC KVM_REG_PPC_TCSCR 64 2379 PPC KVM_REG_PPC_PID 64 2380 PPC KVM_REG_PPC_ACOP 64 2381 PPC KVM_REG_PPC_VRSAVE 32 2382 PPC KVM_REG_PPC_LPCR 32 2383 PPC KVM_REG_PPC_LPCR_64 64 2384 PPC KVM_REG_PPC_PPR 64 2385 PPC KVM_REG_PPC_ARCH_COMPAT 32 2386 PPC KVM_REG_PPC_DABRX 32 2387 PPC KVM_REG_PPC_WORT 64 2388 PPC KVM_REG_PPC_SPRG9 64 2389 PPC KVM_REG_PPC_DBSR 32 2390 PPC KVM_REG_PPC_TIDR 64 2391 PPC KVM_REG_PPC_PSSCR 64 2392 PPC KVM_REG_PPC_DEC_EXPIRY 64 2393 PPC KVM_REG_PPC_PTCR 64 2394 PPC KVM_REG_PPC_DAWR1 64 2395 PPC KVM_REG_PPC_DAWRX1 64 2396 PPC KVM_REG_PPC_TM_GPR0 64 2397 ... 2398 PPC KVM_REG_PPC_TM_GPR31 64 2399 PPC KVM_REG_PPC_TM_VSR0 128 2400 ... 2401 PPC KVM_REG_PPC_TM_VSR63 128 2402 PPC KVM_REG_PPC_TM_CR 64 2403 PPC KVM_REG_PPC_TM_LR 64 2404 PPC KVM_REG_PPC_TM_CTR 64 2405 PPC KVM_REG_PPC_TM_FPSCR 64 2406 PPC KVM_REG_PPC_TM_AMR 64 2407 PPC KVM_REG_PPC_TM_PPR 64 2408 PPC KVM_REG_PPC_TM_VRSAVE 64 2409 PPC KVM_REG_PPC_TM_VSCR 32 2410 PPC KVM_REG_PPC_TM_DSCR 64 2411 PPC KVM_REG_PPC_TM_TAR 64 2412 PPC KVM_REG_PPC_TM_XER 64 2413 2414 MIPS KVM_REG_MIPS_R0 64 2415 ... 2416 MIPS KVM_REG_MIPS_R31 64 2417 MIPS KVM_REG_MIPS_HI 64 2418 MIPS KVM_REG_MIPS_LO 64 2419 MIPS KVM_REG_MIPS_PC 64 2420 MIPS KVM_REG_MIPS_CP0_INDEX 32 2421 MIPS KVM_REG_MIPS_CP0_ENTRYLO0 64 2422 MIPS KVM_REG_MIPS_CP0_ENTRYLO1 64 2423 MIPS KVM_REG_MIPS_CP0_CONTEXT 64 2424 MIPS KVM_REG_MIPS_CP0_CONTEXTCONFIG 32 2425 MIPS KVM_REG_MIPS_CP0_USERLOCAL 64 2426 MIPS KVM_REG_MIPS_CP0_XCONTEXTCONFIG 64 2427 MIPS KVM_REG_MIPS_CP0_PAGEMASK 32 2428 MIPS KVM_REG_MIPS_CP0_PAGEGRAIN 32 2429 MIPS KVM_REG_MIPS_CP0_SEGCTL0 64 2430 MIPS KVM_REG_MIPS_CP0_SEGCTL1 64 2431 MIPS KVM_REG_MIPS_CP0_SEGCTL2 64 2432 MIPS KVM_REG_MIPS_CP0_PWBASE 64 2433 MIPS KVM_REG_MIPS_CP0_PWFIELD 64 2434 MIPS KVM_REG_MIPS_CP0_PWSIZE 64 2435 MIPS KVM_REG_MIPS_CP0_WIRED 32 2436 MIPS KVM_REG_MIPS_CP0_PWCTL 32 2437 MIPS KVM_REG_MIPS_CP0_HWRENA 32 2438 MIPS KVM_REG_MIPS_CP0_BADVADDR 64 2439 MIPS KVM_REG_MIPS_CP0_BADINSTR 32 2440 MIPS KVM_REG_MIPS_CP0_BADINSTRP 32 2441 MIPS KVM_REG_MIPS_CP0_COUNT 32 2442 MIPS KVM_REG_MIPS_CP0_ENTRYHI 64 2443 MIPS KVM_REG_MIPS_CP0_COMPARE 32 2444 MIPS KVM_REG_MIPS_CP0_STATUS 32 2445 MIPS KVM_REG_MIPS_CP0_INTCTL 32 2446 MIPS KVM_REG_MIPS_CP0_CAUSE 32 2447 MIPS KVM_REG_MIPS_CP0_EPC 64 2448 MIPS KVM_REG_MIPS_CP0_PRID 32 2449 MIPS KVM_REG_MIPS_CP0_EBASE 64 2450 MIPS KVM_REG_MIPS_CP0_CONFIG 32 2451 MIPS KVM_REG_MIPS_CP0_CONFIG1 32 2452 MIPS KVM_REG_MIPS_CP0_CONFIG2 32 2453 MIPS KVM_REG_MIPS_CP0_CONFIG3 32 2454 MIPS KVM_REG_MIPS_CP0_CONFIG4 32 2455 MIPS KVM_REG_MIPS_CP0_CONFIG5 32 2456 MIPS KVM_REG_MIPS_CP0_CONFIG7 32 2457 MIPS KVM_REG_MIPS_CP0_XCONTEXT 64 2458 MIPS KVM_REG_MIPS_CP0_ERROREPC 64 2459 MIPS KVM_REG_MIPS_CP0_KSCRATCH1 64 2460 MIPS KVM_REG_MIPS_CP0_KSCRATCH2 64 2461 MIPS KVM_REG_MIPS_CP0_KSCRATCH3 64 2462 MIPS KVM_REG_MIPS_CP0_KSCRATCH4 64 2463 MIPS KVM_REG_MIPS_CP0_KSCRATCH5 64 2464 MIPS KVM_REG_MIPS_CP0_KSCRATCH6 64 2465 MIPS KVM_REG_MIPS_CP0_MAAR(0..63) 64 2466 MIPS KVM_REG_MIPS_COUNT_CTL 64 2467 MIPS KVM_REG_MIPS_COUNT_RESUME 64 2468 MIPS KVM_REG_MIPS_COUNT_HZ 64 2469 MIPS KVM_REG_MIPS_FPR_32(0..31) 32 2470 MIPS KVM_REG_MIPS_FPR_64(0..31) 64 2471 MIPS KVM_REG_MIPS_VEC_128(0..31) 128 2472 MIPS KVM_REG_MIPS_FCR_IR 32 2473 MIPS KVM_REG_MIPS_FCR_CSR 32 2474 MIPS KVM_REG_MIPS_MSA_IR 32 2475 MIPS KVM_REG_MIPS_MSA_CSR 32 2476 ======= =============================== ============ 2477 2478ARM registers are mapped using the lower 32 bits. The upper 16 of that 2479is the register group type, or coprocessor number: 2480 2481ARM core registers have the following id bit patterns:: 2482 2483 0x4020 0000 0010 <index into the kvm_regs struct:16> 2484 2485ARM 32-bit CP15 registers have the following id bit patterns:: 2486 2487 0x4020 0000 000F <zero:1> <crn:4> <crm:4> <opc1:4> <opc2:3> 2488 2489ARM 64-bit CP15 registers have the following id bit patterns:: 2490 2491 0x4030 0000 000F <zero:1> <zero:4> <crm:4> <opc1:4> <zero:3> 2492 2493ARM CCSIDR registers are demultiplexed by CSSELR value:: 2494 2495 0x4020 0000 0011 00 <csselr:8> 2496 2497ARM 32-bit VFP control registers have the following id bit patterns:: 2498 2499 0x4020 0000 0012 1 <regno:12> 2500 2501ARM 64-bit FP registers have the following id bit patterns:: 2502 2503 0x4030 0000 0012 0 <regno:12> 2504 2505ARM firmware pseudo-registers have the following bit pattern:: 2506 2507 0x4030 0000 0014 <regno:16> 2508 2509 2510arm64 registers are mapped using the lower 32 bits. The upper 16 of 2511that is the register group type, or coprocessor number: 2512 2513arm64 core/FP-SIMD registers have the following id bit patterns. Note 2514that the size of the access is variable, as the kvm_regs structure 2515contains elements ranging from 32 to 128 bits. The index is a 32bit 2516value in the kvm_regs structure seen as a 32bit array:: 2517 2518 0x60x0 0000 0010 <index into the kvm_regs struct:16> 2519 2520Specifically: 2521 2522======================= ========= ===== ======================================= 2523 Encoding Register Bits kvm_regs member 2524======================= ========= ===== ======================================= 2525 0x6030 0000 0010 0000 X0 64 regs.regs[0] 2526 0x6030 0000 0010 0002 X1 64 regs.regs[1] 2527 ... 2528 0x6030 0000 0010 003c X30 64 regs.regs[30] 2529 0x6030 0000 0010 003e SP 64 regs.sp 2530 0x6030 0000 0010 0040 PC 64 regs.pc 2531 0x6030 0000 0010 0042 PSTATE 64 regs.pstate 2532 0x6030 0000 0010 0044 SP_EL1 64 sp_el1 2533 0x6030 0000 0010 0046 ELR_EL1 64 elr_el1 2534 0x6030 0000 0010 0048 SPSR_EL1 64 spsr[KVM_SPSR_EL1] (alias SPSR_SVC) 2535 0x6030 0000 0010 004a SPSR_ABT 64 spsr[KVM_SPSR_ABT] 2536 0x6030 0000 0010 004c SPSR_UND 64 spsr[KVM_SPSR_UND] 2537 0x6030 0000 0010 004e SPSR_IRQ 64 spsr[KVM_SPSR_IRQ] 2538 0x6060 0000 0010 0050 SPSR_FIQ 64 spsr[KVM_SPSR_FIQ] 2539 0x6040 0000 0010 0054 V0 128 fp_regs.vregs[0] [1]_ 2540 0x6040 0000 0010 0058 V1 128 fp_regs.vregs[1] [1]_ 2541 ... 2542 0x6040 0000 0010 00d0 V31 128 fp_regs.vregs[31] [1]_ 2543 0x6020 0000 0010 00d4 FPSR 32 fp_regs.fpsr 2544 0x6020 0000 0010 00d5 FPCR 32 fp_regs.fpcr 2545======================= ========= ===== ======================================= 2546 2547.. [1] These encodings are not accepted for SVE-enabled vcpus. See 2548 KVM_ARM_VCPU_INIT. 2549 2550 The equivalent register content can be accessed via bits [127:0] of 2551 the corresponding SVE Zn registers instead for vcpus that have SVE 2552 enabled (see below). 2553 2554arm64 CCSIDR registers are demultiplexed by CSSELR value:: 2555 2556 0x6020 0000 0011 00 <csselr:8> 2557 2558arm64 system registers have the following id bit patterns:: 2559 2560 0x6030 0000 0013 <op0:2> <op1:3> <crn:4> <crm:4> <op2:3> 2561 2562.. warning:: 2563 2564 Two system register IDs do not follow the specified pattern. These 2565 are KVM_REG_ARM_TIMER_CVAL and KVM_REG_ARM_TIMER_CNT, which map to 2566 system registers CNTV_CVAL_EL0 and CNTVCT_EL0 respectively. These 2567 two had their values accidentally swapped, which means TIMER_CVAL is 2568 derived from the register encoding for CNTVCT_EL0 and TIMER_CNT is 2569 derived from the register encoding for CNTV_CVAL_EL0. As this is 2570 API, it must remain this way. 2571 2572arm64 firmware pseudo-registers have the following bit pattern:: 2573 2574 0x6030 0000 0014 <regno:16> 2575 2576arm64 SVE registers have the following bit patterns:: 2577 2578 0x6080 0000 0015 00 <n:5> <slice:5> Zn bits[2048*slice + 2047 : 2048*slice] 2579 0x6050 0000 0015 04 <n:4> <slice:5> Pn bits[256*slice + 255 : 256*slice] 2580 0x6050 0000 0015 060 <slice:5> FFR bits[256*slice + 255 : 256*slice] 2581 0x6060 0000 0015 ffff KVM_REG_ARM64_SVE_VLS pseudo-register 2582 2583Access to register IDs where 2048 * slice >= 128 * max_vq will fail with 2584ENOENT. max_vq is the vcpu's maximum supported vector length in 128-bit 2585quadwords: see [2]_ below. 2586 2587These registers are only accessible on vcpus for which SVE is enabled. 2588See KVM_ARM_VCPU_INIT for details. 2589 2590In addition, except for KVM_REG_ARM64_SVE_VLS, these registers are not 2591accessible until the vcpu's SVE configuration has been finalized 2592using KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE). See KVM_ARM_VCPU_INIT 2593and KVM_ARM_VCPU_FINALIZE for more information about this procedure. 2594 2595KVM_REG_ARM64_SVE_VLS is a pseudo-register that allows the set of vector 2596lengths supported by the vcpu to be discovered and configured by 2597userspace. When transferred to or from user memory via KVM_GET_ONE_REG 2598or KVM_SET_ONE_REG, the value of this register is of type 2599__u64[KVM_ARM64_SVE_VLS_WORDS], and encodes the set of vector lengths as 2600follows:: 2601 2602 __u64 vector_lengths[KVM_ARM64_SVE_VLS_WORDS]; 2603 2604 if (vq >= SVE_VQ_MIN && vq <= SVE_VQ_MAX && 2605 ((vector_lengths[(vq - KVM_ARM64_SVE_VQ_MIN) / 64] >> 2606 ((vq - KVM_ARM64_SVE_VQ_MIN) % 64)) & 1)) 2607 /* Vector length vq * 16 bytes supported */ 2608 else 2609 /* Vector length vq * 16 bytes not supported */ 2610 2611.. [2] The maximum value vq for which the above condition is true is 2612 max_vq. This is the maximum vector length available to the guest on 2613 this vcpu, and determines which register slices are visible through 2614 this ioctl interface. 2615 2616(See Documentation/arm64/sve.rst for an explanation of the "vq" 2617nomenclature.) 2618 2619KVM_REG_ARM64_SVE_VLS is only accessible after KVM_ARM_VCPU_INIT. 2620KVM_ARM_VCPU_INIT initialises it to the best set of vector lengths that 2621the host supports. 2622 2623Userspace may subsequently modify it if desired until the vcpu's SVE 2624configuration is finalized using KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE). 2625 2626Apart from simply removing all vector lengths from the host set that 2627exceed some value, support for arbitrarily chosen sets of vector lengths 2628is hardware-dependent and may not be available. Attempting to configure 2629an invalid set of vector lengths via KVM_SET_ONE_REG will fail with 2630EINVAL. 2631 2632After the vcpu's SVE configuration is finalized, further attempts to 2633write this register will fail with EPERM. 2634 2635arm64 bitmap feature firmware pseudo-registers have the following bit pattern:: 2636 2637 0x6030 0000 0016 <regno:16> 2638 2639The bitmap feature firmware registers exposes the hypercall services that 2640are available for userspace to configure. The set bits corresponds to the 2641services that are available for the guests to access. By default, KVM 2642sets all the supported bits during VM initialization. The userspace can 2643discover the available services via KVM_GET_ONE_REG, and write back the 2644bitmap corresponding to the features that it wishes guests to see via 2645KVM_SET_ONE_REG. 2646 2647Note: These registers are immutable once any of the vCPUs of the VM has 2648run at least once. A KVM_SET_ONE_REG in such a scenario will return 2649a -EBUSY to userspace. 2650 2651(See Documentation/virt/kvm/arm/hypercalls.rst for more details.) 2652 2653 2654MIPS registers are mapped using the lower 32 bits. The upper 16 of that is 2655the register group type: 2656 2657MIPS core registers (see above) have the following id bit patterns:: 2658 2659 0x7030 0000 0000 <reg:16> 2660 2661MIPS CP0 registers (see KVM_REG_MIPS_CP0_* above) have the following id bit 2662patterns depending on whether they're 32-bit or 64-bit registers:: 2663 2664 0x7020 0000 0001 00 <reg:5> <sel:3> (32-bit) 2665 0x7030 0000 0001 00 <reg:5> <sel:3> (64-bit) 2666 2667Note: KVM_REG_MIPS_CP0_ENTRYLO0 and KVM_REG_MIPS_CP0_ENTRYLO1 are the MIPS64 2668versions of the EntryLo registers regardless of the word size of the host 2669hardware, host kernel, guest, and whether XPA is present in the guest, i.e. 2670with the RI and XI bits (if they exist) in bits 63 and 62 respectively, and 2671the PFNX field starting at bit 30. 2672 2673MIPS MAARs (see KVM_REG_MIPS_CP0_MAAR(*) above) have the following id bit 2674patterns:: 2675 2676 0x7030 0000 0001 01 <reg:8> 2677 2678MIPS KVM control registers (see above) have the following id bit patterns:: 2679 2680 0x7030 0000 0002 <reg:16> 2681 2682MIPS FPU registers (see KVM_REG_MIPS_FPR_{32,64}() above) have the following 2683id bit patterns depending on the size of the register being accessed. They are 2684always accessed according to the current guest FPU mode (Status.FR and 2685Config5.FRE), i.e. as the guest would see them, and they become unpredictable 2686if the guest FPU mode is changed. MIPS SIMD Architecture (MSA) vector 2687registers (see KVM_REG_MIPS_VEC_128() above) have similar patterns as they 2688overlap the FPU registers:: 2689 2690 0x7020 0000 0003 00 <0:3> <reg:5> (32-bit FPU registers) 2691 0x7030 0000 0003 00 <0:3> <reg:5> (64-bit FPU registers) 2692 0x7040 0000 0003 00 <0:3> <reg:5> (128-bit MSA vector registers) 2693 2694MIPS FPU control registers (see KVM_REG_MIPS_FCR_{IR,CSR} above) have the 2695following id bit patterns:: 2696 2697 0x7020 0000 0003 01 <0:3> <reg:5> 2698 2699MIPS MSA control registers (see KVM_REG_MIPS_MSA_{IR,CSR} above) have the 2700following id bit patterns:: 2701 2702 0x7020 0000 0003 02 <0:3> <reg:5> 2703 2704RISC-V registers are mapped using the lower 32 bits. The upper 8 bits of 2705that is the register group type. 2706 2707RISC-V config registers are meant for configuring a Guest VCPU and it has 2708the following id bit patterns:: 2709 2710 0x8020 0000 01 <index into the kvm_riscv_config struct:24> (32bit Host) 2711 0x8030 0000 01 <index into the kvm_riscv_config struct:24> (64bit Host) 2712 2713Following are the RISC-V config registers: 2714 2715======================= ========= ============================================= 2716 Encoding Register Description 2717======================= ========= ============================================= 2718 0x80x0 0000 0100 0000 isa ISA feature bitmap of Guest VCPU 2719======================= ========= ============================================= 2720 2721The isa config register can be read anytime but can only be written before 2722a Guest VCPU runs. It will have ISA feature bits matching underlying host 2723set by default. 2724 2725RISC-V core registers represent the general excution state of a Guest VCPU 2726and it has the following id bit patterns:: 2727 2728 0x8020 0000 02 <index into the kvm_riscv_core struct:24> (32bit Host) 2729 0x8030 0000 02 <index into the kvm_riscv_core struct:24> (64bit Host) 2730 2731Following are the RISC-V core registers: 2732 2733======================= ========= ============================================= 2734 Encoding Register Description 2735======================= ========= ============================================= 2736 0x80x0 0000 0200 0000 regs.pc Program counter 2737 0x80x0 0000 0200 0001 regs.ra Return address 2738 0x80x0 0000 0200 0002 regs.sp Stack pointer 2739 0x80x0 0000 0200 0003 regs.gp Global pointer 2740 0x80x0 0000 0200 0004 regs.tp Task pointer 2741 0x80x0 0000 0200 0005 regs.t0 Caller saved register 0 2742 0x80x0 0000 0200 0006 regs.t1 Caller saved register 1 2743 0x80x0 0000 0200 0007 regs.t2 Caller saved register 2 2744 0x80x0 0000 0200 0008 regs.s0 Callee saved register 0 2745 0x80x0 0000 0200 0009 regs.s1 Callee saved register 1 2746 0x80x0 0000 0200 000a regs.a0 Function argument (or return value) 0 2747 0x80x0 0000 0200 000b regs.a1 Function argument (or return value) 1 2748 0x80x0 0000 0200 000c regs.a2 Function argument 2 2749 0x80x0 0000 0200 000d regs.a3 Function argument 3 2750 0x80x0 0000 0200 000e regs.a4 Function argument 4 2751 0x80x0 0000 0200 000f regs.a5 Function argument 5 2752 0x80x0 0000 0200 0010 regs.a6 Function argument 6 2753 0x80x0 0000 0200 0011 regs.a7 Function argument 7 2754 0x80x0 0000 0200 0012 regs.s2 Callee saved register 2 2755 0x80x0 0000 0200 0013 regs.s3 Callee saved register 3 2756 0x80x0 0000 0200 0014 regs.s4 Callee saved register 4 2757 0x80x0 0000 0200 0015 regs.s5 Callee saved register 5 2758 0x80x0 0000 0200 0016 regs.s6 Callee saved register 6 2759 0x80x0 0000 0200 0017 regs.s7 Callee saved register 7 2760 0x80x0 0000 0200 0018 regs.s8 Callee saved register 8 2761 0x80x0 0000 0200 0019 regs.s9 Callee saved register 9 2762 0x80x0 0000 0200 001a regs.s10 Callee saved register 10 2763 0x80x0 0000 0200 001b regs.s11 Callee saved register 11 2764 0x80x0 0000 0200 001c regs.t3 Caller saved register 3 2765 0x80x0 0000 0200 001d regs.t4 Caller saved register 4 2766 0x80x0 0000 0200 001e regs.t5 Caller saved register 5 2767 0x80x0 0000 0200 001f regs.t6 Caller saved register 6 2768 0x80x0 0000 0200 0020 mode Privilege mode (1 = S-mode or 0 = U-mode) 2769======================= ========= ============================================= 2770 2771RISC-V csr registers represent the supervisor mode control/status registers 2772of a Guest VCPU and it has the following id bit patterns:: 2773 2774 0x8020 0000 03 <index into the kvm_riscv_csr struct:24> (32bit Host) 2775 0x8030 0000 03 <index into the kvm_riscv_csr struct:24> (64bit Host) 2776 2777Following are the RISC-V csr registers: 2778 2779======================= ========= ============================================= 2780 Encoding Register Description 2781======================= ========= ============================================= 2782 0x80x0 0000 0300 0000 sstatus Supervisor status 2783 0x80x0 0000 0300 0001 sie Supervisor interrupt enable 2784 0x80x0 0000 0300 0002 stvec Supervisor trap vector base 2785 0x80x0 0000 0300 0003 sscratch Supervisor scratch register 2786 0x80x0 0000 0300 0004 sepc Supervisor exception program counter 2787 0x80x0 0000 0300 0005 scause Supervisor trap cause 2788 0x80x0 0000 0300 0006 stval Supervisor bad address or instruction 2789 0x80x0 0000 0300 0007 sip Supervisor interrupt pending 2790 0x80x0 0000 0300 0008 satp Supervisor address translation and protection 2791======================= ========= ============================================= 2792 2793RISC-V timer registers represent the timer state of a Guest VCPU and it has 2794the following id bit patterns:: 2795 2796 0x8030 0000 04 <index into the kvm_riscv_timer struct:24> 2797 2798Following are the RISC-V timer registers: 2799 2800======================= ========= ============================================= 2801 Encoding Register Description 2802======================= ========= ============================================= 2803 0x8030 0000 0400 0000 frequency Time base frequency (read-only) 2804 0x8030 0000 0400 0001 time Time value visible to Guest 2805 0x8030 0000 0400 0002 compare Time compare programmed by Guest 2806 0x8030 0000 0400 0003 state Time compare state (1 = ON or 0 = OFF) 2807======================= ========= ============================================= 2808 2809RISC-V F-extension registers represent the single precision floating point 2810state of a Guest VCPU and it has the following id bit patterns:: 2811 2812 0x8020 0000 05 <index into the __riscv_f_ext_state struct:24> 2813 2814Following are the RISC-V F-extension registers: 2815 2816======================= ========= ============================================= 2817 Encoding Register Description 2818======================= ========= ============================================= 2819 0x8020 0000 0500 0000 f[0] Floating point register 0 2820 ... 2821 0x8020 0000 0500 001f f[31] Floating point register 31 2822 0x8020 0000 0500 0020 fcsr Floating point control and status register 2823======================= ========= ============================================= 2824 2825RISC-V D-extension registers represent the double precision floating point 2826state of a Guest VCPU and it has the following id bit patterns:: 2827 2828 0x8020 0000 06 <index into the __riscv_d_ext_state struct:24> (fcsr) 2829 0x8030 0000 06 <index into the __riscv_d_ext_state struct:24> (non-fcsr) 2830 2831Following are the RISC-V D-extension registers: 2832 2833======================= ========= ============================================= 2834 Encoding Register Description 2835======================= ========= ============================================= 2836 0x8030 0000 0600 0000 f[0] Floating point register 0 2837 ... 2838 0x8030 0000 0600 001f f[31] Floating point register 31 2839 0x8020 0000 0600 0020 fcsr Floating point control and status register 2840======================= ========= ============================================= 2841 2842 28434.69 KVM_GET_ONE_REG 2844-------------------- 2845 2846:Capability: KVM_CAP_ONE_REG 2847:Architectures: all 2848:Type: vcpu ioctl 2849:Parameters: struct kvm_one_reg (in and out) 2850:Returns: 0 on success, negative value on failure 2851 2852Errors include: 2853 2854 ======== ============================================================ 2855 ENOENT no such register 2856 EINVAL invalid register ID, or no such register or used with VMs in 2857 protected virtualization mode on s390 2858 EPERM (arm64) register access not allowed before vcpu finalization 2859 ======== ============================================================ 2860 2861(These error codes are indicative only: do not rely on a specific error 2862code being returned in a specific situation.) 2863 2864This ioctl allows to receive the value of a single register implemented 2865in a vcpu. The register to read is indicated by the "id" field of the 2866kvm_one_reg struct passed in. On success, the register value can be found 2867at the memory location pointed to by "addr". 2868 2869The list of registers accessible using this interface is identical to the 2870list in 4.68. 2871 2872 28734.70 KVM_KVMCLOCK_CTRL 2874---------------------- 2875 2876:Capability: KVM_CAP_KVMCLOCK_CTRL 2877:Architectures: Any that implement pvclocks (currently x86 only) 2878:Type: vcpu ioctl 2879:Parameters: None 2880:Returns: 0 on success, -1 on error 2881 2882This ioctl sets a flag accessible to the guest indicating that the specified 2883vCPU has been paused by the host userspace. 2884 2885The host will set a flag in the pvclock structure that is checked from the 2886soft lockup watchdog. The flag is part of the pvclock structure that is 2887shared between guest and host, specifically the second bit of the flags 2888field of the pvclock_vcpu_time_info structure. It will be set exclusively by 2889the host and read/cleared exclusively by the guest. The guest operation of 2890checking and clearing the flag must be an atomic operation so 2891load-link/store-conditional, or equivalent must be used. There are two cases 2892where the guest will clear the flag: when the soft lockup watchdog timer resets 2893itself or when a soft lockup is detected. This ioctl can be called any time 2894after pausing the vcpu, but before it is resumed. 2895 2896 28974.71 KVM_SIGNAL_MSI 2898------------------- 2899 2900:Capability: KVM_CAP_SIGNAL_MSI 2901:Architectures: x86 arm64 2902:Type: vm ioctl 2903:Parameters: struct kvm_msi (in) 2904:Returns: >0 on delivery, 0 if guest blocked the MSI, and -1 on error 2905 2906Directly inject a MSI message. Only valid with in-kernel irqchip that handles 2907MSI messages. 2908 2909:: 2910 2911 struct kvm_msi { 2912 __u32 address_lo; 2913 __u32 address_hi; 2914 __u32 data; 2915 __u32 flags; 2916 __u32 devid; 2917 __u8 pad[12]; 2918 }; 2919 2920flags: 2921 KVM_MSI_VALID_DEVID: devid contains a valid value. The per-VM 2922 KVM_CAP_MSI_DEVID capability advertises the requirement to provide 2923 the device ID. If this capability is not available, userspace 2924 should never set the KVM_MSI_VALID_DEVID flag as the ioctl might fail. 2925 2926If KVM_MSI_VALID_DEVID is set, devid contains a unique device identifier 2927for the device that wrote the MSI message. For PCI, this is usually a 2928BFD identifier in the lower 16 bits. 2929 2930On x86, address_hi is ignored unless the KVM_X2APIC_API_USE_32BIT_IDS 2931feature of KVM_CAP_X2APIC_API capability is enabled. If it is enabled, 2932address_hi bits 31-8 provide bits 31-8 of the destination id. Bits 7-0 of 2933address_hi must be zero. 2934 2935 29364.71 KVM_CREATE_PIT2 2937-------------------- 2938 2939:Capability: KVM_CAP_PIT2 2940:Architectures: x86 2941:Type: vm ioctl 2942:Parameters: struct kvm_pit_config (in) 2943:Returns: 0 on success, -1 on error 2944 2945Creates an in-kernel device model for the i8254 PIT. This call is only valid 2946after enabling in-kernel irqchip support via KVM_CREATE_IRQCHIP. The following 2947parameters have to be passed:: 2948 2949 struct kvm_pit_config { 2950 __u32 flags; 2951 __u32 pad[15]; 2952 }; 2953 2954Valid flags are:: 2955 2956 #define KVM_PIT_SPEAKER_DUMMY 1 /* emulate speaker port stub */ 2957 2958PIT timer interrupts may use a per-VM kernel thread for injection. If it 2959exists, this thread will have a name of the following pattern:: 2960 2961 kvm-pit/<owner-process-pid> 2962 2963When running a guest with elevated priorities, the scheduling parameters of 2964this thread may have to be adjusted accordingly. 2965 2966This IOCTL replaces the obsolete KVM_CREATE_PIT. 2967 2968 29694.72 KVM_GET_PIT2 2970----------------- 2971 2972:Capability: KVM_CAP_PIT_STATE2 2973:Architectures: x86 2974:Type: vm ioctl 2975:Parameters: struct kvm_pit_state2 (out) 2976:Returns: 0 on success, -1 on error 2977 2978Retrieves the state of the in-kernel PIT model. Only valid after 2979KVM_CREATE_PIT2. The state is returned in the following structure:: 2980 2981 struct kvm_pit_state2 { 2982 struct kvm_pit_channel_state channels[3]; 2983 __u32 flags; 2984 __u32 reserved[9]; 2985 }; 2986 2987Valid flags are:: 2988 2989 /* disable PIT in HPET legacy mode */ 2990 #define KVM_PIT_FLAGS_HPET_LEGACY 0x00000001 2991 /* speaker port data bit enabled */ 2992 #define KVM_PIT_FLAGS_SPEAKER_DATA_ON 0x00000002 2993 2994This IOCTL replaces the obsolete KVM_GET_PIT. 2995 2996 29974.73 KVM_SET_PIT2 2998----------------- 2999 3000:Capability: KVM_CAP_PIT_STATE2 3001:Architectures: x86 3002:Type: vm ioctl 3003:Parameters: struct kvm_pit_state2 (in) 3004:Returns: 0 on success, -1 on error 3005 3006Sets the state of the in-kernel PIT model. Only valid after KVM_CREATE_PIT2. 3007See KVM_GET_PIT2 for details on struct kvm_pit_state2. 3008 3009This IOCTL replaces the obsolete KVM_SET_PIT. 3010 3011 30124.74 KVM_PPC_GET_SMMU_INFO 3013-------------------------- 3014 3015:Capability: KVM_CAP_PPC_GET_SMMU_INFO 3016:Architectures: powerpc 3017:Type: vm ioctl 3018:Parameters: None 3019:Returns: 0 on success, -1 on error 3020 3021This populates and returns a structure describing the features of 3022the "Server" class MMU emulation supported by KVM. 3023This can in turn be used by userspace to generate the appropriate 3024device-tree properties for the guest operating system. 3025 3026The structure contains some global information, followed by an 3027array of supported segment page sizes:: 3028 3029 struct kvm_ppc_smmu_info { 3030 __u64 flags; 3031 __u32 slb_size; 3032 __u32 pad; 3033 struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; 3034 }; 3035 3036The supported flags are: 3037 3038 - KVM_PPC_PAGE_SIZES_REAL: 3039 When that flag is set, guest page sizes must "fit" the backing 3040 store page sizes. When not set, any page size in the list can 3041 be used regardless of how they are backed by userspace. 3042 3043 - KVM_PPC_1T_SEGMENTS 3044 The emulated MMU supports 1T segments in addition to the 3045 standard 256M ones. 3046 3047 - KVM_PPC_NO_HASH 3048 This flag indicates that HPT guests are not supported by KVM, 3049 thus all guests must use radix MMU mode. 3050 3051The "slb_size" field indicates how many SLB entries are supported 3052 3053The "sps" array contains 8 entries indicating the supported base 3054page sizes for a segment in increasing order. Each entry is defined 3055as follow:: 3056 3057 struct kvm_ppc_one_seg_page_size { 3058 __u32 page_shift; /* Base page shift of segment (or 0) */ 3059 __u32 slb_enc; /* SLB encoding for BookS */ 3060 struct kvm_ppc_one_page_size enc[KVM_PPC_PAGE_SIZES_MAX_SZ]; 3061 }; 3062 3063An entry with a "page_shift" of 0 is unused. Because the array is 3064organized in increasing order, a lookup can stop when encoutering 3065such an entry. 3066 3067The "slb_enc" field provides the encoding to use in the SLB for the 3068page size. The bits are in positions such as the value can directly 3069be OR'ed into the "vsid" argument of the slbmte instruction. 3070 3071The "enc" array is a list which for each of those segment base page 3072size provides the list of supported actual page sizes (which can be 3073only larger or equal to the base page size), along with the 3074corresponding encoding in the hash PTE. Similarly, the array is 30758 entries sorted by increasing sizes and an entry with a "0" shift 3076is an empty entry and a terminator:: 3077 3078 struct kvm_ppc_one_page_size { 3079 __u32 page_shift; /* Page shift (or 0) */ 3080 __u32 pte_enc; /* Encoding in the HPTE (>>12) */ 3081 }; 3082 3083The "pte_enc" field provides a value that can OR'ed into the hash 3084PTE's RPN field (ie, it needs to be shifted left by 12 to OR it 3085into the hash PTE second double word). 3086 30874.75 KVM_IRQFD 3088-------------- 3089 3090:Capability: KVM_CAP_IRQFD 3091:Architectures: x86 s390 arm64 3092:Type: vm ioctl 3093:Parameters: struct kvm_irqfd (in) 3094:Returns: 0 on success, -1 on error 3095 3096Allows setting an eventfd to directly trigger a guest interrupt. 3097kvm_irqfd.fd specifies the file descriptor to use as the eventfd and 3098kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When 3099an event is triggered on the eventfd, an interrupt is injected into 3100the guest using the specified gsi pin. The irqfd is removed using 3101the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd 3102and kvm_irqfd.gsi. 3103 3104With KVM_CAP_IRQFD_RESAMPLE, KVM_IRQFD supports a de-assert and notify 3105mechanism allowing emulation of level-triggered, irqfd-based 3106interrupts. When KVM_IRQFD_FLAG_RESAMPLE is set the user must pass an 3107additional eventfd in the kvm_irqfd.resamplefd field. When operating 3108in resample mode, posting of an interrupt through kvm_irq.fd asserts 3109the specified gsi in the irqchip. When the irqchip is resampled, such 3110as from an EOI, the gsi is de-asserted and the user is notified via 3111kvm_irqfd.resamplefd. It is the user's responsibility to re-queue 3112the interrupt if the device making use of it still requires service. 3113Note that closing the resamplefd is not sufficient to disable the 3114irqfd. The KVM_IRQFD_FLAG_RESAMPLE is only necessary on assignment 3115and need not be specified with KVM_IRQFD_FLAG_DEASSIGN. 3116 3117On arm64, gsi routing being supported, the following can happen: 3118 3119- in case no routing entry is associated to this gsi, injection fails 3120- in case the gsi is associated to an irqchip routing entry, 3121 irqchip.pin + 32 corresponds to the injected SPI ID. 3122- in case the gsi is associated to an MSI routing entry, the MSI 3123 message and device ID are translated into an LPI (support restricted 3124 to GICv3 ITS in-kernel emulation). 3125 31264.76 KVM_PPC_ALLOCATE_HTAB 3127-------------------------- 3128 3129:Capability: KVM_CAP_PPC_ALLOC_HTAB 3130:Architectures: powerpc 3131:Type: vm ioctl 3132:Parameters: Pointer to u32 containing hash table order (in/out) 3133:Returns: 0 on success, -1 on error 3134 3135This requests the host kernel to allocate an MMU hash table for a 3136guest using the PAPR paravirtualization interface. This only does 3137anything if the kernel is configured to use the Book 3S HV style of 3138virtualization. Otherwise the capability doesn't exist and the ioctl 3139returns an ENOTTY error. The rest of this description assumes Book 3S 3140HV. 3141 3142There must be no vcpus running when this ioctl is called; if there 3143are, it will do nothing and return an EBUSY error. 3144 3145The parameter is a pointer to a 32-bit unsigned integer variable 3146containing the order (log base 2) of the desired size of the hash 3147table, which must be between 18 and 46. On successful return from the 3148ioctl, the value will not be changed by the kernel. 3149 3150If no hash table has been allocated when any vcpu is asked to run 3151(with the KVM_RUN ioctl), the host kernel will allocate a 3152default-sized hash table (16 MB). 3153 3154If this ioctl is called when a hash table has already been allocated, 3155with a different order from the existing hash table, the existing hash 3156table will be freed and a new one allocated. If this is ioctl is 3157called when a hash table has already been allocated of the same order 3158as specified, the kernel will clear out the existing hash table (zero 3159all HPTEs). In either case, if the guest is using the virtualized 3160real-mode area (VRMA) facility, the kernel will re-create the VMRA 3161HPTEs on the next KVM_RUN of any vcpu. 3162 31634.77 KVM_S390_INTERRUPT 3164----------------------- 3165 3166:Capability: basic 3167:Architectures: s390 3168:Type: vm ioctl, vcpu ioctl 3169:Parameters: struct kvm_s390_interrupt (in) 3170:Returns: 0 on success, -1 on error 3171 3172Allows to inject an interrupt to the guest. Interrupts can be floating 3173(vm ioctl) or per cpu (vcpu ioctl), depending on the interrupt type. 3174 3175Interrupt parameters are passed via kvm_s390_interrupt:: 3176 3177 struct kvm_s390_interrupt { 3178 __u32 type; 3179 __u32 parm; 3180 __u64 parm64; 3181 }; 3182 3183type can be one of the following: 3184 3185KVM_S390_SIGP_STOP (vcpu) 3186 - sigp stop; optional flags in parm 3187KVM_S390_PROGRAM_INT (vcpu) 3188 - program check; code in parm 3189KVM_S390_SIGP_SET_PREFIX (vcpu) 3190 - sigp set prefix; prefix address in parm 3191KVM_S390_RESTART (vcpu) 3192 - restart 3193KVM_S390_INT_CLOCK_COMP (vcpu) 3194 - clock comparator interrupt 3195KVM_S390_INT_CPU_TIMER (vcpu) 3196 - CPU timer interrupt 3197KVM_S390_INT_VIRTIO (vm) 3198 - virtio external interrupt; external interrupt 3199 parameters in parm and parm64 3200KVM_S390_INT_SERVICE (vm) 3201 - sclp external interrupt; sclp parameter in parm 3202KVM_S390_INT_EMERGENCY (vcpu) 3203 - sigp emergency; source cpu in parm 3204KVM_S390_INT_EXTERNAL_CALL (vcpu) 3205 - sigp external call; source cpu in parm 3206KVM_S390_INT_IO(ai,cssid,ssid,schid) (vm) 3207 - compound value to indicate an 3208 I/O interrupt (ai - adapter interrupt; cssid,ssid,schid - subchannel); 3209 I/O interruption parameters in parm (subchannel) and parm64 (intparm, 3210 interruption subclass) 3211KVM_S390_MCHK (vm, vcpu) 3212 - machine check interrupt; cr 14 bits in parm, machine check interrupt 3213 code in parm64 (note that machine checks needing further payload are not 3214 supported by this ioctl) 3215 3216This is an asynchronous vcpu ioctl and can be invoked from any thread. 3217 32184.78 KVM_PPC_GET_HTAB_FD 3219------------------------ 3220 3221:Capability: KVM_CAP_PPC_HTAB_FD 3222:Architectures: powerpc 3223:Type: vm ioctl 3224:Parameters: Pointer to struct kvm_get_htab_fd (in) 3225:Returns: file descriptor number (>= 0) on success, -1 on error 3226 3227This returns a file descriptor that can be used either to read out the 3228entries in the guest's hashed page table (HPT), or to write entries to 3229initialize the HPT. The returned fd can only be written to if the 3230KVM_GET_HTAB_WRITE bit is set in the flags field of the argument, and 3231can only be read if that bit is clear. The argument struct looks like 3232this:: 3233 3234 /* For KVM_PPC_GET_HTAB_FD */ 3235 struct kvm_get_htab_fd { 3236 __u64 flags; 3237 __u64 start_index; 3238 __u64 reserved[2]; 3239 }; 3240 3241 /* Values for kvm_get_htab_fd.flags */ 3242 #define KVM_GET_HTAB_BOLTED_ONLY ((__u64)0x1) 3243 #define KVM_GET_HTAB_WRITE ((__u64)0x2) 3244 3245The 'start_index' field gives the index in the HPT of the entry at 3246which to start reading. It is ignored when writing. 3247 3248Reads on the fd will initially supply information about all 3249"interesting" HPT entries. Interesting entries are those with the 3250bolted bit set, if the KVM_GET_HTAB_BOLTED_ONLY bit is set, otherwise 3251all entries. When the end of the HPT is reached, the read() will 3252return. If read() is called again on the fd, it will start again from 3253the beginning of the HPT, but will only return HPT entries that have 3254changed since they were last read. 3255 3256Data read or written is structured as a header (8 bytes) followed by a 3257series of valid HPT entries (16 bytes) each. The header indicates how 3258many valid HPT entries there are and how many invalid entries follow 3259the valid entries. The invalid entries are not represented explicitly 3260in the stream. The header format is:: 3261 3262 struct kvm_get_htab_header { 3263 __u32 index; 3264 __u16 n_valid; 3265 __u16 n_invalid; 3266 }; 3267 3268Writes to the fd create HPT entries starting at the index given in the 3269header; first 'n_valid' valid entries with contents from the data 3270written, then 'n_invalid' invalid entries, invalidating any previously 3271valid entries found. 3272 32734.79 KVM_CREATE_DEVICE 3274---------------------- 3275 3276:Capability: KVM_CAP_DEVICE_CTRL 3277:Architectures: all 3278:Type: vm ioctl 3279:Parameters: struct kvm_create_device (in/out) 3280:Returns: 0 on success, -1 on error 3281 3282Errors: 3283 3284 ====== ======================================================= 3285 ENODEV The device type is unknown or unsupported 3286 EEXIST Device already created, and this type of device may not 3287 be instantiated multiple times 3288 ====== ======================================================= 3289 3290 Other error conditions may be defined by individual device types or 3291 have their standard meanings. 3292 3293Creates an emulated device in the kernel. The file descriptor returned 3294in fd can be used with KVM_SET/GET/HAS_DEVICE_ATTR. 3295 3296If the KVM_CREATE_DEVICE_TEST flag is set, only test whether the 3297device type is supported (not necessarily whether it can be created 3298in the current vm). 3299 3300Individual devices should not define flags. Attributes should be used 3301for specifying any behavior that is not implied by the device type 3302number. 3303 3304:: 3305 3306 struct kvm_create_device { 3307 __u32 type; /* in: KVM_DEV_TYPE_xxx */ 3308 __u32 fd; /* out: device handle */ 3309 __u32 flags; /* in: KVM_CREATE_DEVICE_xxx */ 3310 }; 3311 33124.80 KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR 3313-------------------------------------------- 3314 3315:Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device, 3316 KVM_CAP_VCPU_ATTRIBUTES for vcpu device 3317 KVM_CAP_SYS_ATTRIBUTES for system (/dev/kvm) device (no set) 3318:Architectures: x86, arm64, s390 3319:Type: device ioctl, vm ioctl, vcpu ioctl 3320:Parameters: struct kvm_device_attr 3321:Returns: 0 on success, -1 on error 3322 3323Errors: 3324 3325 ===== ============================================================= 3326 ENXIO The group or attribute is unknown/unsupported for this device 3327 or hardware support is missing. 3328 EPERM The attribute cannot (currently) be accessed this way 3329 (e.g. read-only attribute, or attribute that only makes 3330 sense when the device is in a different state) 3331 ===== ============================================================= 3332 3333 Other error conditions may be defined by individual device types. 3334 3335Gets/sets a specified piece of device configuration and/or state. The 3336semantics are device-specific. See individual device documentation in 3337the "devices" directory. As with ONE_REG, the size of the data 3338transferred is defined by the particular attribute. 3339 3340:: 3341 3342 struct kvm_device_attr { 3343 __u32 flags; /* no flags currently defined */ 3344 __u32 group; /* device-defined */ 3345 __u64 attr; /* group-defined */ 3346 __u64 addr; /* userspace address of attr data */ 3347 }; 3348 33494.81 KVM_HAS_DEVICE_ATTR 3350------------------------ 3351 3352:Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device, 3353 KVM_CAP_VCPU_ATTRIBUTES for vcpu device 3354 KVM_CAP_SYS_ATTRIBUTES for system (/dev/kvm) device 3355:Type: device ioctl, vm ioctl, vcpu ioctl 3356:Parameters: struct kvm_device_attr 3357:Returns: 0 on success, -1 on error 3358 3359Errors: 3360 3361 ===== ============================================================= 3362 ENXIO The group or attribute is unknown/unsupported for this device 3363 or hardware support is missing. 3364 ===== ============================================================= 3365 3366Tests whether a device supports a particular attribute. A successful 3367return indicates the attribute is implemented. It does not necessarily 3368indicate that the attribute can be read or written in the device's 3369current state. "addr" is ignored. 3370 33714.82 KVM_ARM_VCPU_INIT 3372---------------------- 3373 3374:Capability: basic 3375:Architectures: arm64 3376:Type: vcpu ioctl 3377:Parameters: struct kvm_vcpu_init (in) 3378:Returns: 0 on success; -1 on error 3379 3380Errors: 3381 3382 ====== ================================================================= 3383 EINVAL the target is unknown, or the combination of features is invalid. 3384 ENOENT a features bit specified is unknown. 3385 ====== ================================================================= 3386 3387This tells KVM what type of CPU to present to the guest, and what 3388optional features it should have. This will cause a reset of the cpu 3389registers to their initial values. If this is not called, KVM_RUN will 3390return ENOEXEC for that vcpu. 3391 3392The initial values are defined as: 3393 - Processor state: 3394 * AArch64: EL1h, D, A, I and F bits set. All other bits 3395 are cleared. 3396 * AArch32: SVC, A, I and F bits set. All other bits are 3397 cleared. 3398 - General Purpose registers, including PC and SP: set to 0 3399 - FPSIMD/NEON registers: set to 0 3400 - SVE registers: set to 0 3401 - System registers: Reset to their architecturally defined 3402 values as for a warm reset to EL1 (resp. SVC) 3403 3404Note that because some registers reflect machine topology, all vcpus 3405should be created before this ioctl is invoked. 3406 3407Userspace can call this function multiple times for a given vcpu, including 3408after the vcpu has been run. This will reset the vcpu to its initial 3409state. All calls to this function after the initial call must use the same 3410target and same set of feature flags, otherwise EINVAL will be returned. 3411 3412Possible features: 3413 3414 - KVM_ARM_VCPU_POWER_OFF: Starts the CPU in a power-off state. 3415 Depends on KVM_CAP_ARM_PSCI. If not set, the CPU will be powered on 3416 and execute guest code when KVM_RUN is called. 3417 - KVM_ARM_VCPU_EL1_32BIT: Starts the CPU in a 32bit mode. 3418 Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only). 3419 - KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 (or a future revision 3420 backward compatible with v0.2) for the CPU. 3421 Depends on KVM_CAP_ARM_PSCI_0_2. 3422 - KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU. 3423 Depends on KVM_CAP_ARM_PMU_V3. 3424 3425 - KVM_ARM_VCPU_PTRAUTH_ADDRESS: Enables Address Pointer authentication 3426 for arm64 only. 3427 Depends on KVM_CAP_ARM_PTRAUTH_ADDRESS. 3428 If KVM_CAP_ARM_PTRAUTH_ADDRESS and KVM_CAP_ARM_PTRAUTH_GENERIC are 3429 both present, then both KVM_ARM_VCPU_PTRAUTH_ADDRESS and 3430 KVM_ARM_VCPU_PTRAUTH_GENERIC must be requested or neither must be 3431 requested. 3432 3433 - KVM_ARM_VCPU_PTRAUTH_GENERIC: Enables Generic Pointer authentication 3434 for arm64 only. 3435 Depends on KVM_CAP_ARM_PTRAUTH_GENERIC. 3436 If KVM_CAP_ARM_PTRAUTH_ADDRESS and KVM_CAP_ARM_PTRAUTH_GENERIC are 3437 both present, then both KVM_ARM_VCPU_PTRAUTH_ADDRESS and 3438 KVM_ARM_VCPU_PTRAUTH_GENERIC must be requested or neither must be 3439 requested. 3440 3441 - KVM_ARM_VCPU_SVE: Enables SVE for the CPU (arm64 only). 3442 Depends on KVM_CAP_ARM_SVE. 3443 Requires KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE): 3444 3445 * After KVM_ARM_VCPU_INIT: 3446 3447 - KVM_REG_ARM64_SVE_VLS may be read using KVM_GET_ONE_REG: the 3448 initial value of this pseudo-register indicates the best set of 3449 vector lengths possible for a vcpu on this host. 3450 3451 * Before KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE): 3452 3453 - KVM_RUN and KVM_GET_REG_LIST are not available; 3454 3455 - KVM_GET_ONE_REG and KVM_SET_ONE_REG cannot be used to access 3456 the scalable archietctural SVE registers 3457 KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() or 3458 KVM_REG_ARM64_SVE_FFR; 3459 3460 - KVM_REG_ARM64_SVE_VLS may optionally be written using 3461 KVM_SET_ONE_REG, to modify the set of vector lengths available 3462 for the vcpu. 3463 3464 * After KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE): 3465 3466 - the KVM_REG_ARM64_SVE_VLS pseudo-register is immutable, and can 3467 no longer be written using KVM_SET_ONE_REG. 3468 34694.83 KVM_ARM_PREFERRED_TARGET 3470----------------------------- 3471 3472:Capability: basic 3473:Architectures: arm64 3474:Type: vm ioctl 3475:Parameters: struct kvm_vcpu_init (out) 3476:Returns: 0 on success; -1 on error 3477 3478Errors: 3479 3480 ====== ========================================== 3481 ENODEV no preferred target available for the host 3482 ====== ========================================== 3483 3484This queries KVM for preferred CPU target type which can be emulated 3485by KVM on underlying host. 3486 3487The ioctl returns struct kvm_vcpu_init instance containing information 3488about preferred CPU target type and recommended features for it. The 3489kvm_vcpu_init->features bitmap returned will have feature bits set if 3490the preferred target recommends setting these features, but this is 3491not mandatory. 3492 3493The information returned by this ioctl can be used to prepare an instance 3494of struct kvm_vcpu_init for KVM_ARM_VCPU_INIT ioctl which will result in 3495VCPU matching underlying host. 3496 3497 34984.84 KVM_GET_REG_LIST 3499--------------------- 3500 3501:Capability: basic 3502:Architectures: arm64, mips 3503:Type: vcpu ioctl 3504:Parameters: struct kvm_reg_list (in/out) 3505:Returns: 0 on success; -1 on error 3506 3507Errors: 3508 3509 ===== ============================================================== 3510 E2BIG the reg index list is too big to fit in the array specified by 3511 the user (the number required will be written into n). 3512 ===== ============================================================== 3513 3514:: 3515 3516 struct kvm_reg_list { 3517 __u64 n; /* number of registers in reg[] */ 3518 __u64 reg[0]; 3519 }; 3520 3521This ioctl returns the guest registers that are supported for the 3522KVM_GET_ONE_REG/KVM_SET_ONE_REG calls. 3523 3524 35254.85 KVM_ARM_SET_DEVICE_ADDR (deprecated) 3526----------------------------------------- 3527 3528:Capability: KVM_CAP_ARM_SET_DEVICE_ADDR 3529:Architectures: arm64 3530:Type: vm ioctl 3531:Parameters: struct kvm_arm_device_address (in) 3532:Returns: 0 on success, -1 on error 3533 3534Errors: 3535 3536 ====== ============================================ 3537 ENODEV The device id is unknown 3538 ENXIO Device not supported on current system 3539 EEXIST Address already set 3540 E2BIG Address outside guest physical address space 3541 EBUSY Address overlaps with other device range 3542 ====== ============================================ 3543 3544:: 3545 3546 struct kvm_arm_device_addr { 3547 __u64 id; 3548 __u64 addr; 3549 }; 3550 3551Specify a device address in the guest's physical address space where guests 3552can access emulated or directly exposed devices, which the host kernel needs 3553to know about. The id field is an architecture specific identifier for a 3554specific device. 3555 3556arm64 divides the id field into two parts, a device id and an 3557address type id specific to the individual device:: 3558 3559 bits: | 63 ... 32 | 31 ... 16 | 15 ... 0 | 3560 field: | 0x00000000 | device id | addr type id | 3561 3562arm64 currently only require this when using the in-kernel GIC 3563support for the hardware VGIC features, using KVM_ARM_DEVICE_VGIC_V2 3564as the device id. When setting the base address for the guest's 3565mapping of the VGIC virtual CPU and distributor interface, the ioctl 3566must be called after calling KVM_CREATE_IRQCHIP, but before calling 3567KVM_RUN on any of the VCPUs. Calling this ioctl twice for any of the 3568base addresses will return -EEXIST. 3569 3570Note, this IOCTL is deprecated and the more flexible SET/GET_DEVICE_ATTR API 3571should be used instead. 3572 3573 35744.86 KVM_PPC_RTAS_DEFINE_TOKEN 3575------------------------------ 3576 3577:Capability: KVM_CAP_PPC_RTAS 3578:Architectures: ppc 3579:Type: vm ioctl 3580:Parameters: struct kvm_rtas_token_args 3581:Returns: 0 on success, -1 on error 3582 3583Defines a token value for a RTAS (Run Time Abstraction Services) 3584service in order to allow it to be handled in the kernel. The 3585argument struct gives the name of the service, which must be the name 3586of a service that has a kernel-side implementation. If the token 3587value is non-zero, it will be associated with that service, and 3588subsequent RTAS calls by the guest specifying that token will be 3589handled by the kernel. If the token value is 0, then any token 3590associated with the service will be forgotten, and subsequent RTAS 3591calls by the guest for that service will be passed to userspace to be 3592handled. 3593 35944.87 KVM_SET_GUEST_DEBUG 3595------------------------ 3596 3597:Capability: KVM_CAP_SET_GUEST_DEBUG 3598:Architectures: x86, s390, ppc, arm64 3599:Type: vcpu ioctl 3600:Parameters: struct kvm_guest_debug (in) 3601:Returns: 0 on success; -1 on error 3602 3603:: 3604 3605 struct kvm_guest_debug { 3606 __u32 control; 3607 __u32 pad; 3608 struct kvm_guest_debug_arch arch; 3609 }; 3610 3611Set up the processor specific debug registers and configure vcpu for 3612handling guest debug events. There are two parts to the structure, the 3613first a control bitfield indicates the type of debug events to handle 3614when running. Common control bits are: 3615 3616 - KVM_GUESTDBG_ENABLE: guest debugging is enabled 3617 - KVM_GUESTDBG_SINGLESTEP: the next run should single-step 3618 3619The top 16 bits of the control field are architecture specific control 3620flags which can include the following: 3621 3622 - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86, arm64] 3623 - KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390] 3624 - KVM_GUESTDBG_USE_HW: using hardware debug events [arm64] 3625 - KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86] 3626 - KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86] 3627 - KVM_GUESTDBG_EXIT_PENDING: trigger an immediate guest exit [s390] 3628 - KVM_GUESTDBG_BLOCKIRQ: avoid injecting interrupts/NMI/SMI [x86] 3629 3630For example KVM_GUESTDBG_USE_SW_BP indicates that software breakpoints 3631are enabled in memory so we need to ensure breakpoint exceptions are 3632correctly trapped and the KVM run loop exits at the breakpoint and not 3633running off into the normal guest vector. For KVM_GUESTDBG_USE_HW_BP 3634we need to ensure the guest vCPUs architecture specific registers are 3635updated to the correct (supplied) values. 3636 3637The second part of the structure is architecture specific and 3638typically contains a set of debug registers. 3639 3640For arm64 the number of debug registers is implementation defined and 3641can be determined by querying the KVM_CAP_GUEST_DEBUG_HW_BPS and 3642KVM_CAP_GUEST_DEBUG_HW_WPS capabilities which return a positive number 3643indicating the number of supported registers. 3644 3645For ppc, the KVM_CAP_PPC_GUEST_DEBUG_SSTEP capability indicates whether 3646the single-step debug event (KVM_GUESTDBG_SINGLESTEP) is supported. 3647 3648Also when supported, KVM_CAP_SET_GUEST_DEBUG2 capability indicates the 3649supported KVM_GUESTDBG_* bits in the control field. 3650 3651When debug events exit the main run loop with the reason 3652KVM_EXIT_DEBUG with the kvm_debug_exit_arch part of the kvm_run 3653structure containing architecture specific debug information. 3654 36554.88 KVM_GET_EMULATED_CPUID 3656--------------------------- 3657 3658:Capability: KVM_CAP_EXT_EMUL_CPUID 3659:Architectures: x86 3660:Type: system ioctl 3661:Parameters: struct kvm_cpuid2 (in/out) 3662:Returns: 0 on success, -1 on error 3663 3664:: 3665 3666 struct kvm_cpuid2 { 3667 __u32 nent; 3668 __u32 flags; 3669 struct kvm_cpuid_entry2 entries[0]; 3670 }; 3671 3672The member 'flags' is used for passing flags from userspace. 3673 3674:: 3675 3676 #define KVM_CPUID_FLAG_SIGNIFCANT_INDEX BIT(0) 3677 #define KVM_CPUID_FLAG_STATEFUL_FUNC BIT(1) /* deprecated */ 3678 #define KVM_CPUID_FLAG_STATE_READ_NEXT BIT(2) /* deprecated */ 3679 3680 struct kvm_cpuid_entry2 { 3681 __u32 function; 3682 __u32 index; 3683 __u32 flags; 3684 __u32 eax; 3685 __u32 ebx; 3686 __u32 ecx; 3687 __u32 edx; 3688 __u32 padding[3]; 3689 }; 3690 3691This ioctl returns x86 cpuid features which are emulated by 3692kvm.Userspace can use the information returned by this ioctl to query 3693which features are emulated by kvm instead of being present natively. 3694 3695Userspace invokes KVM_GET_EMULATED_CPUID by passing a kvm_cpuid2 3696structure with the 'nent' field indicating the number of entries in 3697the variable-size array 'entries'. If the number of entries is too low 3698to describe the cpu capabilities, an error (E2BIG) is returned. If the 3699number is too high, the 'nent' field is adjusted and an error (ENOMEM) 3700is returned. If the number is just right, the 'nent' field is adjusted 3701to the number of valid entries in the 'entries' array, which is then 3702filled. 3703 3704The entries returned are the set CPUID bits of the respective features 3705which kvm emulates, as returned by the CPUID instruction, with unknown 3706or unsupported feature bits cleared. 3707 3708Features like x2apic, for example, may not be present in the host cpu 3709but are exposed by kvm in KVM_GET_SUPPORTED_CPUID because they can be 3710emulated efficiently and thus not included here. 3711 3712The fields in each entry are defined as follows: 3713 3714 function: 3715 the eax value used to obtain the entry 3716 index: 3717 the ecx value used to obtain the entry (for entries that are 3718 affected by ecx) 3719 flags: 3720 an OR of zero or more of the following: 3721 3722 KVM_CPUID_FLAG_SIGNIFCANT_INDEX: 3723 if the index field is valid 3724 3725 eax, ebx, ecx, edx: 3726 3727 the values returned by the cpuid instruction for 3728 this function/index combination 3729 37304.89 KVM_S390_MEM_OP 3731-------------------- 3732 3733:Capability: KVM_CAP_S390_MEM_OP, KVM_CAP_S390_PROTECTED, KVM_CAP_S390_MEM_OP_EXTENSION 3734:Architectures: s390 3735:Type: vm ioctl, vcpu ioctl 3736:Parameters: struct kvm_s390_mem_op (in) 3737:Returns: = 0 on success, 3738 < 0 on generic error (e.g. -EFAULT or -ENOMEM), 3739 16 bit program exception code if the access causes such an exception 3740 3741Read or write data from/to the VM's memory. 3742The KVM_CAP_S390_MEM_OP_EXTENSION capability specifies what functionality is 3743supported. 3744 3745Parameters are specified via the following structure:: 3746 3747 struct kvm_s390_mem_op { 3748 __u64 gaddr; /* the guest address */ 3749 __u64 flags; /* flags */ 3750 __u32 size; /* amount of bytes */ 3751 __u32 op; /* type of operation */ 3752 __u64 buf; /* buffer in userspace */ 3753 union { 3754 struct { 3755 __u8 ar; /* the access register number */ 3756 __u8 key; /* access key, ignored if flag unset */ 3757 __u8 pad1[6]; /* ignored */ 3758 __u64 old_addr; /* ignored if flag unset */ 3759 }; 3760 __u32 sida_offset; /* offset into the sida */ 3761 __u8 reserved[32]; /* ignored */ 3762 }; 3763 }; 3764 3765The start address of the memory region has to be specified in the "gaddr" 3766field, and the length of the region in the "size" field (which must not 3767be 0). The maximum value for "size" can be obtained by checking the 3768KVM_CAP_S390_MEM_OP capability. "buf" is the buffer supplied by the 3769userspace application where the read data should be written to for 3770a read access, or where the data that should be written is stored for 3771a write access. The "reserved" field is meant for future extensions. 3772Reserved and unused values are ignored. Future extension that add members must 3773introduce new flags. 3774 3775The type of operation is specified in the "op" field. Flags modifying 3776their behavior can be set in the "flags" field. Undefined flag bits must 3777be set to 0. 3778 3779Possible operations are: 3780 * ``KVM_S390_MEMOP_LOGICAL_READ`` 3781 * ``KVM_S390_MEMOP_LOGICAL_WRITE`` 3782 * ``KVM_S390_MEMOP_ABSOLUTE_READ`` 3783 * ``KVM_S390_MEMOP_ABSOLUTE_WRITE`` 3784 * ``KVM_S390_MEMOP_SIDA_READ`` 3785 * ``KVM_S390_MEMOP_SIDA_WRITE`` 3786 * ``KVM_S390_MEMOP_ABSOLUTE_CMPXCHG`` 3787 3788Logical read/write: 3789^^^^^^^^^^^^^^^^^^^ 3790 3791Access logical memory, i.e. translate the given guest address to an absolute 3792address given the state of the VCPU and use the absolute address as target of 3793the access. "ar" designates the access register number to be used; the valid 3794range is 0..15. 3795Logical accesses are permitted for the VCPU ioctl only. 3796Logical accesses are permitted for non-protected guests only. 3797 3798Supported flags: 3799 * ``KVM_S390_MEMOP_F_CHECK_ONLY`` 3800 * ``KVM_S390_MEMOP_F_INJECT_EXCEPTION`` 3801 * ``KVM_S390_MEMOP_F_SKEY_PROTECTION`` 3802 3803The KVM_S390_MEMOP_F_CHECK_ONLY flag can be set to check whether the 3804corresponding memory access would cause an access exception; however, 3805no actual access to the data in memory at the destination is performed. 3806In this case, "buf" is unused and can be NULL. 3807 3808In case an access exception occurred during the access (or would occur 3809in case of KVM_S390_MEMOP_F_CHECK_ONLY), the ioctl returns a positive 3810error number indicating the type of exception. This exception is also 3811raised directly at the corresponding VCPU if the flag 3812KVM_S390_MEMOP_F_INJECT_EXCEPTION is set. 3813On protection exceptions, unless specified otherwise, the injected 3814translation-exception identifier (TEID) indicates suppression. 3815 3816If the KVM_S390_MEMOP_F_SKEY_PROTECTION flag is set, storage key 3817protection is also in effect and may cause exceptions if accesses are 3818prohibited given the access key designated by "key"; the valid range is 0..15. 3819KVM_S390_MEMOP_F_SKEY_PROTECTION is available if KVM_CAP_S390_MEM_OP_EXTENSION 3820is > 0. 3821Since the accessed memory may span multiple pages and those pages might have 3822different storage keys, it is possible that a protection exception occurs 3823after memory has been modified. In this case, if the exception is injected, 3824the TEID does not indicate suppression. 3825 3826Absolute read/write: 3827^^^^^^^^^^^^^^^^^^^^ 3828 3829Access absolute memory. This operation is intended to be used with the 3830KVM_S390_MEMOP_F_SKEY_PROTECTION flag, to allow accessing memory and performing 3831the checks required for storage key protection as one operation (as opposed to 3832user space getting the storage keys, performing the checks, and accessing 3833memory thereafter, which could lead to a delay between check and access). 3834Absolute accesses are permitted for the VM ioctl if KVM_CAP_S390_MEM_OP_EXTENSION 3835has the KVM_S390_MEMOP_EXTENSION_CAP_BASE bit set. 3836Currently absolute accesses are not permitted for VCPU ioctls. 3837Absolute accesses are permitted for non-protected guests only. 3838 3839Supported flags: 3840 * ``KVM_S390_MEMOP_F_CHECK_ONLY`` 3841 * ``KVM_S390_MEMOP_F_SKEY_PROTECTION`` 3842 3843The semantics of the flags common with logical accesses are as for logical 3844accesses. 3845 3846Absolute cmpxchg: 3847^^^^^^^^^^^^^^^^^ 3848 3849Perform cmpxchg on absolute guest memory. Intended for use with the 3850KVM_S390_MEMOP_F_SKEY_PROTECTION flag. 3851Instead of doing an unconditional write, the access occurs only if the target 3852location contains the value pointed to by "old_addr". 3853This is performed as an atomic cmpxchg with the length specified by the "size" 3854parameter. "size" must be a power of two up to and including 16. 3855If the exchange did not take place because the target value doesn't match the 3856old value, the value "old_addr" points to is replaced by the target value. 3857User space can tell if an exchange took place by checking if this replacement 3858occurred. The cmpxchg op is permitted for the VM ioctl if 3859KVM_CAP_S390_MEM_OP_EXTENSION has flag KVM_S390_MEMOP_EXTENSION_CAP_CMPXCHG set. 3860 3861Supported flags: 3862 * ``KVM_S390_MEMOP_F_SKEY_PROTECTION`` 3863 3864SIDA read/write: 3865^^^^^^^^^^^^^^^^ 3866 3867Access the secure instruction data area which contains memory operands necessary 3868for instruction emulation for protected guests. 3869SIDA accesses are available if the KVM_CAP_S390_PROTECTED capability is available. 3870SIDA accesses are permitted for the VCPU ioctl only. 3871SIDA accesses are permitted for protected guests only. 3872 3873No flags are supported. 3874 38754.90 KVM_S390_GET_SKEYS 3876----------------------- 3877 3878:Capability: KVM_CAP_S390_SKEYS 3879:Architectures: s390 3880:Type: vm ioctl 3881:Parameters: struct kvm_s390_skeys 3882:Returns: 0 on success, KVM_S390_GET_SKEYS_NONE if guest is not using storage 3883 keys, negative value on error 3884 3885This ioctl is used to get guest storage key values on the s390 3886architecture. The ioctl takes parameters via the kvm_s390_skeys struct:: 3887 3888 struct kvm_s390_skeys { 3889 __u64 start_gfn; 3890 __u64 count; 3891 __u64 skeydata_addr; 3892 __u32 flags; 3893 __u32 reserved[9]; 3894 }; 3895 3896The start_gfn field is the number of the first guest frame whose storage keys 3897you want to get. 3898 3899The count field is the number of consecutive frames (starting from start_gfn) 3900whose storage keys to get. The count field must be at least 1 and the maximum 3901allowed value is defined as KVM_S390_SKEYS_MAX. Values outside this range 3902will cause the ioctl to return -EINVAL. 3903 3904The skeydata_addr field is the address to a buffer large enough to hold count 3905bytes. This buffer will be filled with storage key data by the ioctl. 3906 39074.91 KVM_S390_SET_SKEYS 3908----------------------- 3909 3910:Capability: KVM_CAP_S390_SKEYS 3911:Architectures: s390 3912:Type: vm ioctl 3913:Parameters: struct kvm_s390_skeys 3914:Returns: 0 on success, negative value on error 3915 3916This ioctl is used to set guest storage key values on the s390 3917architecture. The ioctl takes parameters via the kvm_s390_skeys struct. 3918See section on KVM_S390_GET_SKEYS for struct definition. 3919 3920The start_gfn field is the number of the first guest frame whose storage keys 3921you want to set. 3922 3923The count field is the number of consecutive frames (starting from start_gfn) 3924whose storage keys to get. The count field must be at least 1 and the maximum 3925allowed value is defined as KVM_S390_SKEYS_MAX. Values outside this range 3926will cause the ioctl to return -EINVAL. 3927 3928The skeydata_addr field is the address to a buffer containing count bytes of 3929storage keys. Each byte in the buffer will be set as the storage key for a 3930single frame starting at start_gfn for count frames. 3931 3932Note: If any architecturally invalid key value is found in the given data then 3933the ioctl will return -EINVAL. 3934 39354.92 KVM_S390_IRQ 3936----------------- 3937 3938:Capability: KVM_CAP_S390_INJECT_IRQ 3939:Architectures: s390 3940:Type: vcpu ioctl 3941:Parameters: struct kvm_s390_irq (in) 3942:Returns: 0 on success, -1 on error 3943 3944Errors: 3945 3946 3947 ====== ================================================================= 3948 EINVAL interrupt type is invalid 3949 type is KVM_S390_SIGP_STOP and flag parameter is invalid value, 3950 type is KVM_S390_INT_EXTERNAL_CALL and code is bigger 3951 than the maximum of VCPUs 3952 EBUSY type is KVM_S390_SIGP_SET_PREFIX and vcpu is not stopped, 3953 type is KVM_S390_SIGP_STOP and a stop irq is already pending, 3954 type is KVM_S390_INT_EXTERNAL_CALL and an external call interrupt 3955 is already pending 3956 ====== ================================================================= 3957 3958Allows to inject an interrupt to the guest. 3959 3960Using struct kvm_s390_irq as a parameter allows 3961to inject additional payload which is not 3962possible via KVM_S390_INTERRUPT. 3963 3964Interrupt parameters are passed via kvm_s390_irq:: 3965 3966 struct kvm_s390_irq { 3967 __u64 type; 3968 union { 3969 struct kvm_s390_io_info io; 3970 struct kvm_s390_ext_info ext; 3971 struct kvm_s390_pgm_info pgm; 3972 struct kvm_s390_emerg_info emerg; 3973 struct kvm_s390_extcall_info extcall; 3974 struct kvm_s390_prefix_info prefix; 3975 struct kvm_s390_stop_info stop; 3976 struct kvm_s390_mchk_info mchk; 3977 char reserved[64]; 3978 } u; 3979 }; 3980 3981type can be one of the following: 3982 3983- KVM_S390_SIGP_STOP - sigp stop; parameter in .stop 3984- KVM_S390_PROGRAM_INT - program check; parameters in .pgm 3985- KVM_S390_SIGP_SET_PREFIX - sigp set prefix; parameters in .prefix 3986- KVM_S390_RESTART - restart; no parameters 3987- KVM_S390_INT_CLOCK_COMP - clock comparator interrupt; no parameters 3988- KVM_S390_INT_CPU_TIMER - CPU timer interrupt; no parameters 3989- KVM_S390_INT_EMERGENCY - sigp emergency; parameters in .emerg 3990- KVM_S390_INT_EXTERNAL_CALL - sigp external call; parameters in .extcall 3991- KVM_S390_MCHK - machine check interrupt; parameters in .mchk 3992 3993This is an asynchronous vcpu ioctl and can be invoked from any thread. 3994 39954.94 KVM_S390_GET_IRQ_STATE 3996--------------------------- 3997 3998:Capability: KVM_CAP_S390_IRQ_STATE 3999:Architectures: s390 4000:Type: vcpu ioctl 4001:Parameters: struct kvm_s390_irq_state (out) 4002:Returns: >= number of bytes copied into buffer, 4003 -EINVAL if buffer size is 0, 4004 -ENOBUFS if buffer size is too small to fit all pending interrupts, 4005 -EFAULT if the buffer address was invalid 4006 4007This ioctl allows userspace to retrieve the complete state of all currently 4008pending interrupts in a single buffer. Use cases include migration 4009and introspection. The parameter structure contains the address of a 4010userspace buffer and its length:: 4011 4012 struct kvm_s390_irq_state { 4013 __u64 buf; 4014 __u32 flags; /* will stay unused for compatibility reasons */ 4015 __u32 len; 4016 __u32 reserved[4]; /* will stay unused for compatibility reasons */ 4017 }; 4018 4019Userspace passes in the above struct and for each pending interrupt a 4020struct kvm_s390_irq is copied to the provided buffer. 4021 4022The structure contains a flags and a reserved field for future extensions. As 4023the kernel never checked for flags == 0 and QEMU never pre-zeroed flags and 4024reserved, these fields can not be used in the future without breaking 4025compatibility. 4026 4027If -ENOBUFS is returned the buffer provided was too small and userspace 4028may retry with a bigger buffer. 4029 40304.95 KVM_S390_SET_IRQ_STATE 4031--------------------------- 4032 4033:Capability: KVM_CAP_S390_IRQ_STATE 4034:Architectures: s390 4035:Type: vcpu ioctl 4036:Parameters: struct kvm_s390_irq_state (in) 4037:Returns: 0 on success, 4038 -EFAULT if the buffer address was invalid, 4039 -EINVAL for an invalid buffer length (see below), 4040 -EBUSY if there were already interrupts pending, 4041 errors occurring when actually injecting the 4042 interrupt. See KVM_S390_IRQ. 4043 4044This ioctl allows userspace to set the complete state of all cpu-local 4045interrupts currently pending for the vcpu. It is intended for restoring 4046interrupt state after a migration. The input parameter is a userspace buffer 4047containing a struct kvm_s390_irq_state:: 4048 4049 struct kvm_s390_irq_state { 4050 __u64 buf; 4051 __u32 flags; /* will stay unused for compatibility reasons */ 4052 __u32 len; 4053 __u32 reserved[4]; /* will stay unused for compatibility reasons */ 4054 }; 4055 4056The restrictions for flags and reserved apply as well. 4057(see KVM_S390_GET_IRQ_STATE) 4058 4059The userspace memory referenced by buf contains a struct kvm_s390_irq 4060for each interrupt to be injected into the guest. 4061If one of the interrupts could not be injected for some reason the 4062ioctl aborts. 4063 4064len must be a multiple of sizeof(struct kvm_s390_irq). It must be > 0 4065and it must not exceed (max_vcpus + 32) * sizeof(struct kvm_s390_irq), 4066which is the maximum number of possibly pending cpu-local interrupts. 4067 40684.96 KVM_SMI 4069------------ 4070 4071:Capability: KVM_CAP_X86_SMM 4072:Architectures: x86 4073:Type: vcpu ioctl 4074:Parameters: none 4075:Returns: 0 on success, -1 on error 4076 4077Queues an SMI on the thread's vcpu. 4078 40794.97 KVM_X86_SET_MSR_FILTER 4080---------------------------- 4081 4082:Capability: KVM_CAP_X86_MSR_FILTER 4083:Architectures: x86 4084:Type: vm ioctl 4085:Parameters: struct kvm_msr_filter 4086:Returns: 0 on success, < 0 on error 4087 4088:: 4089 4090 struct kvm_msr_filter_range { 4091 #define KVM_MSR_FILTER_READ (1 << 0) 4092 #define KVM_MSR_FILTER_WRITE (1 << 1) 4093 __u32 flags; 4094 __u32 nmsrs; /* number of msrs in bitmap */ 4095 __u32 base; /* MSR index the bitmap starts at */ 4096 __u8 *bitmap; /* a 1 bit allows the operations in flags, 0 denies */ 4097 }; 4098 4099 #define KVM_MSR_FILTER_MAX_RANGES 16 4100 struct kvm_msr_filter { 4101 #define KVM_MSR_FILTER_DEFAULT_ALLOW (0 << 0) 4102 #define KVM_MSR_FILTER_DEFAULT_DENY (1 << 0) 4103 __u32 flags; 4104 struct kvm_msr_filter_range ranges[KVM_MSR_FILTER_MAX_RANGES]; 4105 }; 4106 4107flags values for ``struct kvm_msr_filter_range``: 4108 4109``KVM_MSR_FILTER_READ`` 4110 4111 Filter read accesses to MSRs using the given bitmap. A 0 in the bitmap 4112 indicates that read accesses should be denied, while a 1 indicates that 4113 a read for a particular MSR should be allowed regardless of the default 4114 filter action. 4115 4116``KVM_MSR_FILTER_WRITE`` 4117 4118 Filter write accesses to MSRs using the given bitmap. A 0 in the bitmap 4119 indicates that write accesses should be denied, while a 1 indicates that 4120 a write for a particular MSR should be allowed regardless of the default 4121 filter action. 4122 4123flags values for ``struct kvm_msr_filter``: 4124 4125``KVM_MSR_FILTER_DEFAULT_ALLOW`` 4126 4127 If no filter range matches an MSR index that is getting accessed, KVM will 4128 allow accesses to all MSRs by default. 4129 4130``KVM_MSR_FILTER_DEFAULT_DENY`` 4131 4132 If no filter range matches an MSR index that is getting accessed, KVM will 4133 deny accesses to all MSRs by default. 4134 4135This ioctl allows userspace to define up to 16 bitmaps of MSR ranges to deny 4136guest MSR accesses that would normally be allowed by KVM. If an MSR is not 4137covered by a specific range, the "default" filtering behavior applies. Each 4138bitmap range covers MSRs from [base .. base+nmsrs). 4139 4140If an MSR access is denied by userspace, the resulting KVM behavior depends on 4141whether or not KVM_CAP_X86_USER_SPACE_MSR's KVM_MSR_EXIT_REASON_FILTER is 4142enabled. If KVM_MSR_EXIT_REASON_FILTER is enabled, KVM will exit to userspace 4143on denied accesses, i.e. userspace effectively intercepts the MSR access. If 4144KVM_MSR_EXIT_REASON_FILTER is not enabled, KVM will inject a #GP into the guest 4145on denied accesses. 4146 4147If an MSR access is allowed by userspace, KVM will emulate and/or virtualize 4148the access in accordance with the vCPU model. Note, KVM may still ultimately 4149inject a #GP if an access is allowed by userspace, e.g. if KVM doesn't support 4150the MSR, or to follow architectural behavior for the MSR. 4151 4152By default, KVM operates in KVM_MSR_FILTER_DEFAULT_ALLOW mode with no MSR range 4153filters. 4154 4155Calling this ioctl with an empty set of ranges (all nmsrs == 0) disables MSR 4156filtering. In that mode, ``KVM_MSR_FILTER_DEFAULT_DENY`` is invalid and causes 4157an error. 4158 4159.. warning:: 4160 MSR accesses as part of nested VM-Enter/VM-Exit are not filtered. 4161 This includes both writes to individual VMCS fields and reads/writes 4162 through the MSR lists pointed to by the VMCS. 4163 4164 x2APIC MSR accesses cannot be filtered (KVM silently ignores filters that 4165 cover any x2APIC MSRs). 4166 4167Note, invoking this ioctl while a vCPU is running is inherently racy. However, 4168KVM does guarantee that vCPUs will see either the previous filter or the new 4169filter, e.g. MSRs with identical settings in both the old and new filter will 4170have deterministic behavior. 4171 4172Similarly, if userspace wishes to intercept on denied accesses, 4173KVM_MSR_EXIT_REASON_FILTER must be enabled before activating any filters, and 4174left enabled until after all filters are deactivated. Failure to do so may 4175result in KVM injecting a #GP instead of exiting to userspace. 4176 41774.98 KVM_CREATE_SPAPR_TCE_64 4178---------------------------- 4179 4180:Capability: KVM_CAP_SPAPR_TCE_64 4181:Architectures: powerpc 4182:Type: vm ioctl 4183:Parameters: struct kvm_create_spapr_tce_64 (in) 4184:Returns: file descriptor for manipulating the created TCE table 4185 4186This is an extension for KVM_CAP_SPAPR_TCE which only supports 32bit 4187windows, described in 4.62 KVM_CREATE_SPAPR_TCE 4188 4189This capability uses extended struct in ioctl interface:: 4190 4191 /* for KVM_CAP_SPAPR_TCE_64 */ 4192 struct kvm_create_spapr_tce_64 { 4193 __u64 liobn; 4194 __u32 page_shift; 4195 __u32 flags; 4196 __u64 offset; /* in pages */ 4197 __u64 size; /* in pages */ 4198 }; 4199 4200The aim of extension is to support an additional bigger DMA window with 4201a variable page size. 4202KVM_CREATE_SPAPR_TCE_64 receives a 64bit window size, an IOMMU page shift and 4203a bus offset of the corresponding DMA window, @size and @offset are numbers 4204of IOMMU pages. 4205 4206@flags are not used at the moment. 4207 4208The rest of functionality is identical to KVM_CREATE_SPAPR_TCE. 4209 42104.99 KVM_REINJECT_CONTROL 4211------------------------- 4212 4213:Capability: KVM_CAP_REINJECT_CONTROL 4214:Architectures: x86 4215:Type: vm ioctl 4216:Parameters: struct kvm_reinject_control (in) 4217:Returns: 0 on success, 4218 -EFAULT if struct kvm_reinject_control cannot be read, 4219 -ENXIO if KVM_CREATE_PIT or KVM_CREATE_PIT2 didn't succeed earlier. 4220 4221i8254 (PIT) has two modes, reinject and !reinject. The default is reinject, 4222where KVM queues elapsed i8254 ticks and monitors completion of interrupt from 4223vector(s) that i8254 injects. Reinject mode dequeues a tick and injects its 4224interrupt whenever there isn't a pending interrupt from i8254. 4225!reinject mode injects an interrupt as soon as a tick arrives. 4226 4227:: 4228 4229 struct kvm_reinject_control { 4230 __u8 pit_reinject; 4231 __u8 reserved[31]; 4232 }; 4233 4234pit_reinject = 0 (!reinject mode) is recommended, unless running an old 4235operating system that uses the PIT for timing (e.g. Linux 2.4.x). 4236 42374.100 KVM_PPC_CONFIGURE_V3_MMU 4238------------------------------ 4239 4240:Capability: KVM_CAP_PPC_RADIX_MMU or KVM_CAP_PPC_HASH_MMU_V3 4241:Architectures: ppc 4242:Type: vm ioctl 4243:Parameters: struct kvm_ppc_mmuv3_cfg (in) 4244:Returns: 0 on success, 4245 -EFAULT if struct kvm_ppc_mmuv3_cfg cannot be read, 4246 -EINVAL if the configuration is invalid 4247 4248This ioctl controls whether the guest will use radix or HPT (hashed 4249page table) translation, and sets the pointer to the process table for 4250the guest. 4251 4252:: 4253 4254 struct kvm_ppc_mmuv3_cfg { 4255 __u64 flags; 4256 __u64 process_table; 4257 }; 4258 4259There are two bits that can be set in flags; KVM_PPC_MMUV3_RADIX and 4260KVM_PPC_MMUV3_GTSE. KVM_PPC_MMUV3_RADIX, if set, configures the guest 4261to use radix tree translation, and if clear, to use HPT translation. 4262KVM_PPC_MMUV3_GTSE, if set and if KVM permits it, configures the guest 4263to be able to use the global TLB and SLB invalidation instructions; 4264if clear, the guest may not use these instructions. 4265 4266The process_table field specifies the address and size of the guest 4267process table, which is in the guest's space. This field is formatted 4268as the second doubleword of the partition table entry, as defined in 4269the Power ISA V3.00, Book III section 5.7.6.1. 4270 42714.101 KVM_PPC_GET_RMMU_INFO 4272--------------------------- 4273 4274:Capability: KVM_CAP_PPC_RADIX_MMU 4275:Architectures: ppc 4276:Type: vm ioctl 4277:Parameters: struct kvm_ppc_rmmu_info (out) 4278:Returns: 0 on success, 4279 -EFAULT if struct kvm_ppc_rmmu_info cannot be written, 4280 -EINVAL if no useful information can be returned 4281 4282This ioctl returns a structure containing two things: (a) a list 4283containing supported radix tree geometries, and (b) a list that maps 4284page sizes to put in the "AP" (actual page size) field for the tlbie 4285(TLB invalidate entry) instruction. 4286 4287:: 4288 4289 struct kvm_ppc_rmmu_info { 4290 struct kvm_ppc_radix_geom { 4291 __u8 page_shift; 4292 __u8 level_bits[4]; 4293 __u8 pad[3]; 4294 } geometries[8]; 4295 __u32 ap_encodings[8]; 4296 }; 4297 4298The geometries[] field gives up to 8 supported geometries for the 4299radix page table, in terms of the log base 2 of the smallest page 4300size, and the number of bits indexed at each level of the tree, from 4301the PTE level up to the PGD level in that order. Any unused entries 4302will have 0 in the page_shift field. 4303 4304The ap_encodings gives the supported page sizes and their AP field 4305encodings, encoded with the AP value in the top 3 bits and the log 4306base 2 of the page size in the bottom 6 bits. 4307 43084.102 KVM_PPC_RESIZE_HPT_PREPARE 4309-------------------------------- 4310 4311:Capability: KVM_CAP_SPAPR_RESIZE_HPT 4312:Architectures: powerpc 4313:Type: vm ioctl 4314:Parameters: struct kvm_ppc_resize_hpt (in) 4315:Returns: 0 on successful completion, 4316 >0 if a new HPT is being prepared, the value is an estimated 4317 number of milliseconds until preparation is complete, 4318 -EFAULT if struct kvm_reinject_control cannot be read, 4319 -EINVAL if the supplied shift or flags are invalid, 4320 -ENOMEM if unable to allocate the new HPT, 4321 4322Used to implement the PAPR extension for runtime resizing of a guest's 4323Hashed Page Table (HPT). Specifically this starts, stops or monitors 4324the preparation of a new potential HPT for the guest, essentially 4325implementing the H_RESIZE_HPT_PREPARE hypercall. 4326 4327:: 4328 4329 struct kvm_ppc_resize_hpt { 4330 __u64 flags; 4331 __u32 shift; 4332 __u32 pad; 4333 }; 4334 4335If called with shift > 0 when there is no pending HPT for the guest, 4336this begins preparation of a new pending HPT of size 2^(shift) bytes. 4337It then returns a positive integer with the estimated number of 4338milliseconds until preparation is complete. 4339 4340If called when there is a pending HPT whose size does not match that 4341requested in the parameters, discards the existing pending HPT and 4342creates a new one as above. 4343 4344If called when there is a pending HPT of the size requested, will: 4345 4346 * If preparation of the pending HPT is already complete, return 0 4347 * If preparation of the pending HPT has failed, return an error 4348 code, then discard the pending HPT. 4349 * If preparation of the pending HPT is still in progress, return an 4350 estimated number of milliseconds until preparation is complete. 4351 4352If called with shift == 0, discards any currently pending HPT and 4353returns 0 (i.e. cancels any in-progress preparation). 4354 4355flags is reserved for future expansion, currently setting any bits in 4356flags will result in an -EINVAL. 4357 4358Normally this will be called repeatedly with the same parameters until 4359it returns <= 0. The first call will initiate preparation, subsequent 4360ones will monitor preparation until it completes or fails. 4361 43624.103 KVM_PPC_RESIZE_HPT_COMMIT 4363------------------------------- 4364 4365:Capability: KVM_CAP_SPAPR_RESIZE_HPT 4366:Architectures: powerpc 4367:Type: vm ioctl 4368:Parameters: struct kvm_ppc_resize_hpt (in) 4369:Returns: 0 on successful completion, 4370 -EFAULT if struct kvm_reinject_control cannot be read, 4371 -EINVAL if the supplied shift or flags are invalid, 4372 -ENXIO is there is no pending HPT, or the pending HPT doesn't 4373 have the requested size, 4374 -EBUSY if the pending HPT is not fully prepared, 4375 -ENOSPC if there was a hash collision when moving existing 4376 HPT entries to the new HPT, 4377 -EIO on other error conditions 4378 4379Used to implement the PAPR extension for runtime resizing of a guest's 4380Hashed Page Table (HPT). Specifically this requests that the guest be 4381transferred to working with the new HPT, essentially implementing the 4382H_RESIZE_HPT_COMMIT hypercall. 4383 4384:: 4385 4386 struct kvm_ppc_resize_hpt { 4387 __u64 flags; 4388 __u32 shift; 4389 __u32 pad; 4390 }; 4391 4392This should only be called after KVM_PPC_RESIZE_HPT_PREPARE has 4393returned 0 with the same parameters. In other cases 4394KVM_PPC_RESIZE_HPT_COMMIT will return an error (usually -ENXIO or 4395-EBUSY, though others may be possible if the preparation was started, 4396but failed). 4397 4398This will have undefined effects on the guest if it has not already 4399placed itself in a quiescent state where no vcpu will make MMU enabled 4400memory accesses. 4401 4402On succsful completion, the pending HPT will become the guest's active 4403HPT and the previous HPT will be discarded. 4404 4405On failure, the guest will still be operating on its previous HPT. 4406 44074.104 KVM_X86_GET_MCE_CAP_SUPPORTED 4408----------------------------------- 4409 4410:Capability: KVM_CAP_MCE 4411:Architectures: x86 4412:Type: system ioctl 4413:Parameters: u64 mce_cap (out) 4414:Returns: 0 on success, -1 on error 4415 4416Returns supported MCE capabilities. The u64 mce_cap parameter 4417has the same format as the MSR_IA32_MCG_CAP register. Supported 4418capabilities will have the corresponding bits set. 4419 44204.105 KVM_X86_SETUP_MCE 4421----------------------- 4422 4423:Capability: KVM_CAP_MCE 4424:Architectures: x86 4425:Type: vcpu ioctl 4426:Parameters: u64 mcg_cap (in) 4427:Returns: 0 on success, 4428 -EFAULT if u64 mcg_cap cannot be read, 4429 -EINVAL if the requested number of banks is invalid, 4430 -EINVAL if requested MCE capability is not supported. 4431 4432Initializes MCE support for use. The u64 mcg_cap parameter 4433has the same format as the MSR_IA32_MCG_CAP register and 4434specifies which capabilities should be enabled. The maximum 4435supported number of error-reporting banks can be retrieved when 4436checking for KVM_CAP_MCE. The supported capabilities can be 4437retrieved with KVM_X86_GET_MCE_CAP_SUPPORTED. 4438 44394.106 KVM_X86_SET_MCE 4440--------------------- 4441 4442:Capability: KVM_CAP_MCE 4443:Architectures: x86 4444:Type: vcpu ioctl 4445:Parameters: struct kvm_x86_mce (in) 4446:Returns: 0 on success, 4447 -EFAULT if struct kvm_x86_mce cannot be read, 4448 -EINVAL if the bank number is invalid, 4449 -EINVAL if VAL bit is not set in status field. 4450 4451Inject a machine check error (MCE) into the guest. The input 4452parameter is:: 4453 4454 struct kvm_x86_mce { 4455 __u64 status; 4456 __u64 addr; 4457 __u64 misc; 4458 __u64 mcg_status; 4459 __u8 bank; 4460 __u8 pad1[7]; 4461 __u64 pad2[3]; 4462 }; 4463 4464If the MCE being reported is an uncorrected error, KVM will 4465inject it as an MCE exception into the guest. If the guest 4466MCG_STATUS register reports that an MCE is in progress, KVM 4467causes an KVM_EXIT_SHUTDOWN vmexit. 4468 4469Otherwise, if the MCE is a corrected error, KVM will just 4470store it in the corresponding bank (provided this bank is 4471not holding a previously reported uncorrected error). 4472 44734.107 KVM_S390_GET_CMMA_BITS 4474---------------------------- 4475 4476:Capability: KVM_CAP_S390_CMMA_MIGRATION 4477:Architectures: s390 4478:Type: vm ioctl 4479:Parameters: struct kvm_s390_cmma_log (in, out) 4480:Returns: 0 on success, a negative value on error 4481 4482Errors: 4483 4484 ====== ============================================================= 4485 ENOMEM not enough memory can be allocated to complete the task 4486 ENXIO if CMMA is not enabled 4487 EINVAL if KVM_S390_CMMA_PEEK is not set but migration mode was not enabled 4488 EINVAL if KVM_S390_CMMA_PEEK is not set but dirty tracking has been 4489 disabled (and thus migration mode was automatically disabled) 4490 EFAULT if the userspace address is invalid or if no page table is 4491 present for the addresses (e.g. when using hugepages). 4492 ====== ============================================================= 4493 4494This ioctl is used to get the values of the CMMA bits on the s390 4495architecture. It is meant to be used in two scenarios: 4496 4497- During live migration to save the CMMA values. Live migration needs 4498 to be enabled via the KVM_REQ_START_MIGRATION VM property. 4499- To non-destructively peek at the CMMA values, with the flag 4500 KVM_S390_CMMA_PEEK set. 4501 4502The ioctl takes parameters via the kvm_s390_cmma_log struct. The desired 4503values are written to a buffer whose location is indicated via the "values" 4504member in the kvm_s390_cmma_log struct. The values in the input struct are 4505also updated as needed. 4506 4507Each CMMA value takes up one byte. 4508 4509:: 4510 4511 struct kvm_s390_cmma_log { 4512 __u64 start_gfn; 4513 __u32 count; 4514 __u32 flags; 4515 union { 4516 __u64 remaining; 4517 __u64 mask; 4518 }; 4519 __u64 values; 4520 }; 4521 4522start_gfn is the number of the first guest frame whose CMMA values are 4523to be retrieved, 4524 4525count is the length of the buffer in bytes, 4526 4527values points to the buffer where the result will be written to. 4528 4529If count is greater than KVM_S390_SKEYS_MAX, then it is considered to be 4530KVM_S390_SKEYS_MAX. KVM_S390_SKEYS_MAX is re-used for consistency with 4531other ioctls. 4532 4533The result is written in the buffer pointed to by the field values, and 4534the values of the input parameter are updated as follows. 4535 4536Depending on the flags, different actions are performed. The only 4537supported flag so far is KVM_S390_CMMA_PEEK. 4538 4539The default behaviour if KVM_S390_CMMA_PEEK is not set is: 4540start_gfn will indicate the first page frame whose CMMA bits were dirty. 4541It is not necessarily the same as the one passed as input, as clean pages 4542are skipped. 4543 4544count will indicate the number of bytes actually written in the buffer. 4545It can (and very often will) be smaller than the input value, since the 4546buffer is only filled until 16 bytes of clean values are found (which 4547are then not copied in the buffer). Since a CMMA migration block needs 4548the base address and the length, for a total of 16 bytes, we will send 4549back some clean data if there is some dirty data afterwards, as long as 4550the size of the clean data does not exceed the size of the header. This 4551allows to minimize the amount of data to be saved or transferred over 4552the network at the expense of more roundtrips to userspace. The next 4553invocation of the ioctl will skip over all the clean values, saving 4554potentially more than just the 16 bytes we found. 4555 4556If KVM_S390_CMMA_PEEK is set: 4557the existing storage attributes are read even when not in migration 4558mode, and no other action is performed; 4559 4560the output start_gfn will be equal to the input start_gfn, 4561 4562the output count will be equal to the input count, except if the end of 4563memory has been reached. 4564 4565In both cases: 4566the field "remaining" will indicate the total number of dirty CMMA values 4567still remaining, or 0 if KVM_S390_CMMA_PEEK is set and migration mode is 4568not enabled. 4569 4570mask is unused. 4571 4572values points to the userspace buffer where the result will be stored. 4573 45744.108 KVM_S390_SET_CMMA_BITS 4575---------------------------- 4576 4577:Capability: KVM_CAP_S390_CMMA_MIGRATION 4578:Architectures: s390 4579:Type: vm ioctl 4580:Parameters: struct kvm_s390_cmma_log (in) 4581:Returns: 0 on success, a negative value on error 4582 4583This ioctl is used to set the values of the CMMA bits on the s390 4584architecture. It is meant to be used during live migration to restore 4585the CMMA values, but there are no restrictions on its use. 4586The ioctl takes parameters via the kvm_s390_cmma_values struct. 4587Each CMMA value takes up one byte. 4588 4589:: 4590 4591 struct kvm_s390_cmma_log { 4592 __u64 start_gfn; 4593 __u32 count; 4594 __u32 flags; 4595 union { 4596 __u64 remaining; 4597 __u64 mask; 4598 }; 4599 __u64 values; 4600 }; 4601 4602start_gfn indicates the starting guest frame number, 4603 4604count indicates how many values are to be considered in the buffer, 4605 4606flags is not used and must be 0. 4607 4608mask indicates which PGSTE bits are to be considered. 4609 4610remaining is not used. 4611 4612values points to the buffer in userspace where to store the values. 4613 4614This ioctl can fail with -ENOMEM if not enough memory can be allocated to 4615complete the task, with -ENXIO if CMMA is not enabled, with -EINVAL if 4616the count field is too large (e.g. more than KVM_S390_CMMA_SIZE_MAX) or 4617if the flags field was not 0, with -EFAULT if the userspace address is 4618invalid, if invalid pages are written to (e.g. after the end of memory) 4619or if no page table is present for the addresses (e.g. when using 4620hugepages). 4621 46224.109 KVM_PPC_GET_CPU_CHAR 4623-------------------------- 4624 4625:Capability: KVM_CAP_PPC_GET_CPU_CHAR 4626:Architectures: powerpc 4627:Type: vm ioctl 4628:Parameters: struct kvm_ppc_cpu_char (out) 4629:Returns: 0 on successful completion, 4630 -EFAULT if struct kvm_ppc_cpu_char cannot be written 4631 4632This ioctl gives userspace information about certain characteristics 4633of the CPU relating to speculative execution of instructions and 4634possible information leakage resulting from speculative execution (see 4635CVE-2017-5715, CVE-2017-5753 and CVE-2017-5754). The information is 4636returned in struct kvm_ppc_cpu_char, which looks like this:: 4637 4638 struct kvm_ppc_cpu_char { 4639 __u64 character; /* characteristics of the CPU */ 4640 __u64 behaviour; /* recommended software behaviour */ 4641 __u64 character_mask; /* valid bits in character */ 4642 __u64 behaviour_mask; /* valid bits in behaviour */ 4643 }; 4644 4645For extensibility, the character_mask and behaviour_mask fields 4646indicate which bits of character and behaviour have been filled in by 4647the kernel. If the set of defined bits is extended in future then 4648userspace will be able to tell whether it is running on a kernel that 4649knows about the new bits. 4650 4651The character field describes attributes of the CPU which can help 4652with preventing inadvertent information disclosure - specifically, 4653whether there is an instruction to flash-invalidate the L1 data cache 4654(ori 30,30,0 or mtspr SPRN_TRIG2,rN), whether the L1 data cache is set 4655to a mode where entries can only be used by the thread that created 4656them, whether the bcctr[l] instruction prevents speculation, and 4657whether a speculation barrier instruction (ori 31,31,0) is provided. 4658 4659The behaviour field describes actions that software should take to 4660prevent inadvertent information disclosure, and thus describes which 4661vulnerabilities the hardware is subject to; specifically whether the 4662L1 data cache should be flushed when returning to user mode from the 4663kernel, and whether a speculation barrier should be placed between an 4664array bounds check and the array access. 4665 4666These fields use the same bit definitions as the new 4667H_GET_CPU_CHARACTERISTICS hypercall. 4668 46694.110 KVM_MEMORY_ENCRYPT_OP 4670--------------------------- 4671 4672:Capability: basic 4673:Architectures: x86 4674:Type: vm 4675:Parameters: an opaque platform specific structure (in/out) 4676:Returns: 0 on success; -1 on error 4677 4678If the platform supports creating encrypted VMs then this ioctl can be used 4679for issuing platform-specific memory encryption commands to manage those 4680encrypted VMs. 4681 4682Currently, this ioctl is used for issuing Secure Encrypted Virtualization 4683(SEV) commands on AMD Processors. The SEV commands are defined in 4684Documentation/virt/kvm/x86/amd-memory-encryption.rst. 4685 46864.111 KVM_MEMORY_ENCRYPT_REG_REGION 4687----------------------------------- 4688 4689:Capability: basic 4690:Architectures: x86 4691:Type: system 4692:Parameters: struct kvm_enc_region (in) 4693:Returns: 0 on success; -1 on error 4694 4695This ioctl can be used to register a guest memory region which may 4696contain encrypted data (e.g. guest RAM, SMRAM etc). 4697 4698It is used in the SEV-enabled guest. When encryption is enabled, a guest 4699memory region may contain encrypted data. The SEV memory encryption 4700engine uses a tweak such that two identical plaintext pages, each at 4701different locations will have differing ciphertexts. So swapping or 4702moving ciphertext of those pages will not result in plaintext being 4703swapped. So relocating (or migrating) physical backing pages for the SEV 4704guest will require some additional steps. 4705 4706Note: The current SEV key management spec does not provide commands to 4707swap or migrate (move) ciphertext pages. Hence, for now we pin the guest 4708memory region registered with the ioctl. 4709 47104.112 KVM_MEMORY_ENCRYPT_UNREG_REGION 4711------------------------------------- 4712 4713:Capability: basic 4714:Architectures: x86 4715:Type: system 4716:Parameters: struct kvm_enc_region (in) 4717:Returns: 0 on success; -1 on error 4718 4719This ioctl can be used to unregister the guest memory region registered 4720with KVM_MEMORY_ENCRYPT_REG_REGION ioctl above. 4721 47224.113 KVM_HYPERV_EVENTFD 4723------------------------ 4724 4725:Capability: KVM_CAP_HYPERV_EVENTFD 4726:Architectures: x86 4727:Type: vm ioctl 4728:Parameters: struct kvm_hyperv_eventfd (in) 4729 4730This ioctl (un)registers an eventfd to receive notifications from the guest on 4731the specified Hyper-V connection id through the SIGNAL_EVENT hypercall, without 4732causing a user exit. SIGNAL_EVENT hypercall with non-zero event flag number 4733(bits 24-31) still triggers a KVM_EXIT_HYPERV_HCALL user exit. 4734 4735:: 4736 4737 struct kvm_hyperv_eventfd { 4738 __u32 conn_id; 4739 __s32 fd; 4740 __u32 flags; 4741 __u32 padding[3]; 4742 }; 4743 4744The conn_id field should fit within 24 bits:: 4745 4746 #define KVM_HYPERV_CONN_ID_MASK 0x00ffffff 4747 4748The acceptable values for the flags field are:: 4749 4750 #define KVM_HYPERV_EVENTFD_DEASSIGN (1 << 0) 4751 4752:Returns: 0 on success, 4753 -EINVAL if conn_id or flags is outside the allowed range, 4754 -ENOENT on deassign if the conn_id isn't registered, 4755 -EEXIST on assign if the conn_id is already registered 4756 47574.114 KVM_GET_NESTED_STATE 4758-------------------------- 4759 4760:Capability: KVM_CAP_NESTED_STATE 4761:Architectures: x86 4762:Type: vcpu ioctl 4763:Parameters: struct kvm_nested_state (in/out) 4764:Returns: 0 on success, -1 on error 4765 4766Errors: 4767 4768 ===== ============================================================= 4769 E2BIG the total state size exceeds the value of 'size' specified by 4770 the user; the size required will be written into size. 4771 ===== ============================================================= 4772 4773:: 4774 4775 struct kvm_nested_state { 4776 __u16 flags; 4777 __u16 format; 4778 __u32 size; 4779 4780 union { 4781 struct kvm_vmx_nested_state_hdr vmx; 4782 struct kvm_svm_nested_state_hdr svm; 4783 4784 /* Pad the header to 128 bytes. */ 4785 __u8 pad[120]; 4786 } hdr; 4787 4788 union { 4789 struct kvm_vmx_nested_state_data vmx[0]; 4790 struct kvm_svm_nested_state_data svm[0]; 4791 } data; 4792 }; 4793 4794 #define KVM_STATE_NESTED_GUEST_MODE 0x00000001 4795 #define KVM_STATE_NESTED_RUN_PENDING 0x00000002 4796 #define KVM_STATE_NESTED_EVMCS 0x00000004 4797 4798 #define KVM_STATE_NESTED_FORMAT_VMX 0 4799 #define KVM_STATE_NESTED_FORMAT_SVM 1 4800 4801 #define KVM_STATE_NESTED_VMX_VMCS_SIZE 0x1000 4802 4803 #define KVM_STATE_NESTED_VMX_SMM_GUEST_MODE 0x00000001 4804 #define KVM_STATE_NESTED_VMX_SMM_VMXON 0x00000002 4805 4806 #define KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE 0x00000001 4807 4808 struct kvm_vmx_nested_state_hdr { 4809 __u64 vmxon_pa; 4810 __u64 vmcs12_pa; 4811 4812 struct { 4813 __u16 flags; 4814 } smm; 4815 4816 __u32 flags; 4817 __u64 preemption_timer_deadline; 4818 }; 4819 4820 struct kvm_vmx_nested_state_data { 4821 __u8 vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE]; 4822 __u8 shadow_vmcs12[KVM_STATE_NESTED_VMX_VMCS_SIZE]; 4823 }; 4824 4825This ioctl copies the vcpu's nested virtualization state from the kernel to 4826userspace. 4827 4828The maximum size of the state can be retrieved by passing KVM_CAP_NESTED_STATE 4829to the KVM_CHECK_EXTENSION ioctl(). 4830 48314.115 KVM_SET_NESTED_STATE 4832-------------------------- 4833 4834:Capability: KVM_CAP_NESTED_STATE 4835:Architectures: x86 4836:Type: vcpu ioctl 4837:Parameters: struct kvm_nested_state (in) 4838:Returns: 0 on success, -1 on error 4839 4840This copies the vcpu's kvm_nested_state struct from userspace to the kernel. 4841For the definition of struct kvm_nested_state, see KVM_GET_NESTED_STATE. 4842 48434.116 KVM_(UN)REGISTER_COALESCED_MMIO 4844------------------------------------- 4845 4846:Capability: KVM_CAP_COALESCED_MMIO (for coalesced mmio) 4847 KVM_CAP_COALESCED_PIO (for coalesced pio) 4848:Architectures: all 4849:Type: vm ioctl 4850:Parameters: struct kvm_coalesced_mmio_zone 4851:Returns: 0 on success, < 0 on error 4852 4853Coalesced I/O is a performance optimization that defers hardware 4854register write emulation so that userspace exits are avoided. It is 4855typically used to reduce the overhead of emulating frequently accessed 4856hardware registers. 4857 4858When a hardware register is configured for coalesced I/O, write accesses 4859do not exit to userspace and their value is recorded in a ring buffer 4860that is shared between kernel and userspace. 4861 4862Coalesced I/O is used if one or more write accesses to a hardware 4863register can be deferred until a read or a write to another hardware 4864register on the same device. This last access will cause a vmexit and 4865userspace will process accesses from the ring buffer before emulating 4866it. That will avoid exiting to userspace on repeated writes. 4867 4868Coalesced pio is based on coalesced mmio. There is little difference 4869between coalesced mmio and pio except that coalesced pio records accesses 4870to I/O ports. 4871 48724.117 KVM_CLEAR_DIRTY_LOG (vm ioctl) 4873------------------------------------ 4874 4875:Capability: KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 4876:Architectures: x86, arm64, mips 4877:Type: vm ioctl 4878:Parameters: struct kvm_clear_dirty_log (in) 4879:Returns: 0 on success, -1 on error 4880 4881:: 4882 4883 /* for KVM_CLEAR_DIRTY_LOG */ 4884 struct kvm_clear_dirty_log { 4885 __u32 slot; 4886 __u32 num_pages; 4887 __u64 first_page; 4888 union { 4889 void __user *dirty_bitmap; /* one bit per page */ 4890 __u64 padding; 4891 }; 4892 }; 4893 4894The ioctl clears the dirty status of pages in a memory slot, according to 4895the bitmap that is passed in struct kvm_clear_dirty_log's dirty_bitmap 4896field. Bit 0 of the bitmap corresponds to page "first_page" in the 4897memory slot, and num_pages is the size in bits of the input bitmap. 4898first_page must be a multiple of 64; num_pages must also be a multiple of 489964 unless first_page + num_pages is the size of the memory slot. For each 4900bit that is set in the input bitmap, the corresponding page is marked "clean" 4901in KVM's dirty bitmap, and dirty tracking is re-enabled for that page 4902(for example via write-protection, or by clearing the dirty bit in 4903a page table entry). 4904 4905If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of slot field specifies 4906the address space for which you want to clear the dirty status. See 4907KVM_SET_USER_MEMORY_REGION for details on the usage of slot field. 4908 4909This ioctl is mostly useful when KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 4910is enabled; for more information, see the description of the capability. 4911However, it can always be used as long as KVM_CHECK_EXTENSION confirms 4912that KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is present. 4913 49144.118 KVM_GET_SUPPORTED_HV_CPUID 4915-------------------------------- 4916 4917:Capability: KVM_CAP_HYPERV_CPUID (vcpu), KVM_CAP_SYS_HYPERV_CPUID (system) 4918:Architectures: x86 4919:Type: system ioctl, vcpu ioctl 4920:Parameters: struct kvm_cpuid2 (in/out) 4921:Returns: 0 on success, -1 on error 4922 4923:: 4924 4925 struct kvm_cpuid2 { 4926 __u32 nent; 4927 __u32 padding; 4928 struct kvm_cpuid_entry2 entries[0]; 4929 }; 4930 4931 struct kvm_cpuid_entry2 { 4932 __u32 function; 4933 __u32 index; 4934 __u32 flags; 4935 __u32 eax; 4936 __u32 ebx; 4937 __u32 ecx; 4938 __u32 edx; 4939 __u32 padding[3]; 4940 }; 4941 4942This ioctl returns x86 cpuid features leaves related to Hyper-V emulation in 4943KVM. Userspace can use the information returned by this ioctl to construct 4944cpuid information presented to guests consuming Hyper-V enlightenments (e.g. 4945Windows or Hyper-V guests). 4946 4947CPUID feature leaves returned by this ioctl are defined by Hyper-V Top Level 4948Functional Specification (TLFS). These leaves can't be obtained with 4949KVM_GET_SUPPORTED_CPUID ioctl because some of them intersect with KVM feature 4950leaves (0x40000000, 0x40000001). 4951 4952Currently, the following list of CPUID leaves are returned: 4953 4954 - HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS 4955 - HYPERV_CPUID_INTERFACE 4956 - HYPERV_CPUID_VERSION 4957 - HYPERV_CPUID_FEATURES 4958 - HYPERV_CPUID_ENLIGHTMENT_INFO 4959 - HYPERV_CPUID_IMPLEMENT_LIMITS 4960 - HYPERV_CPUID_NESTED_FEATURES 4961 - HYPERV_CPUID_SYNDBG_VENDOR_AND_MAX_FUNCTIONS 4962 - HYPERV_CPUID_SYNDBG_INTERFACE 4963 - HYPERV_CPUID_SYNDBG_PLATFORM_CAPABILITIES 4964 4965Userspace invokes KVM_GET_SUPPORTED_HV_CPUID by passing a kvm_cpuid2 structure 4966with the 'nent' field indicating the number of entries in the variable-size 4967array 'entries'. If the number of entries is too low to describe all Hyper-V 4968feature leaves, an error (E2BIG) is returned. If the number is more or equal 4969to the number of Hyper-V feature leaves, the 'nent' field is adjusted to the 4970number of valid entries in the 'entries' array, which is then filled. 4971 4972'index' and 'flags' fields in 'struct kvm_cpuid_entry2' are currently reserved, 4973userspace should not expect to get any particular value there. 4974 4975Note, vcpu version of KVM_GET_SUPPORTED_HV_CPUID is currently deprecated. Unlike 4976system ioctl which exposes all supported feature bits unconditionally, vcpu 4977version has the following quirks: 4978 4979- HYPERV_CPUID_NESTED_FEATURES leaf and HV_X64_ENLIGHTENED_VMCS_RECOMMENDED 4980 feature bit are only exposed when Enlightened VMCS was previously enabled 4981 on the corresponding vCPU (KVM_CAP_HYPERV_ENLIGHTENED_VMCS). 4982- HV_STIMER_DIRECT_MODE_AVAILABLE bit is only exposed with in-kernel LAPIC. 4983 (presumes KVM_CREATE_IRQCHIP has already been called). 4984 49854.119 KVM_ARM_VCPU_FINALIZE 4986--------------------------- 4987 4988:Architectures: arm64 4989:Type: vcpu ioctl 4990:Parameters: int feature (in) 4991:Returns: 0 on success, -1 on error 4992 4993Errors: 4994 4995 ====== ============================================================== 4996 EPERM feature not enabled, needs configuration, or already finalized 4997 EINVAL feature unknown or not present 4998 ====== ============================================================== 4999 5000Recognised values for feature: 5001 5002 ===== =========================================== 5003 arm64 KVM_ARM_VCPU_SVE (requires KVM_CAP_ARM_SVE) 5004 ===== =========================================== 5005 5006Finalizes the configuration of the specified vcpu feature. 5007 5008The vcpu must already have been initialised, enabling the affected feature, by 5009means of a successful KVM_ARM_VCPU_INIT call with the appropriate flag set in 5010features[]. 5011 5012For affected vcpu features, this is a mandatory step that must be performed 5013before the vcpu is fully usable. 5014 5015Between KVM_ARM_VCPU_INIT and KVM_ARM_VCPU_FINALIZE, the feature may be 5016configured by use of ioctls such as KVM_SET_ONE_REG. The exact configuration 5017that should be performaned and how to do it are feature-dependent. 5018 5019Other calls that depend on a particular feature being finalized, such as 5020KVM_RUN, KVM_GET_REG_LIST, KVM_GET_ONE_REG and KVM_SET_ONE_REG, will fail with 5021-EPERM unless the feature has already been finalized by means of a 5022KVM_ARM_VCPU_FINALIZE call. 5023 5024See KVM_ARM_VCPU_INIT for details of vcpu features that require finalization 5025using this ioctl. 5026 50274.120 KVM_SET_PMU_EVENT_FILTER 5028------------------------------ 5029 5030:Capability: KVM_CAP_PMU_EVENT_FILTER 5031:Architectures: x86 5032:Type: vm ioctl 5033:Parameters: struct kvm_pmu_event_filter (in) 5034:Returns: 0 on success, -1 on error 5035 5036Errors: 5037 5038 ====== ============================================================ 5039 EFAULT args[0] cannot be accessed 5040 EINVAL args[0] contains invalid data in the filter or filter events 5041 E2BIG nevents is too large 5042 EBUSY not enough memory to allocate the filter 5043 ====== ============================================================ 5044 5045:: 5046 5047 struct kvm_pmu_event_filter { 5048 __u32 action; 5049 __u32 nevents; 5050 __u32 fixed_counter_bitmap; 5051 __u32 flags; 5052 __u32 pad[4]; 5053 __u64 events[0]; 5054 }; 5055 5056This ioctl restricts the set of PMU events the guest can program by limiting 5057which event select and unit mask combinations are permitted. 5058 5059The argument holds a list of filter events which will be allowed or denied. 5060 5061Filter events only control general purpose counters; fixed purpose counters 5062are controlled by the fixed_counter_bitmap. 5063 5064Valid values for 'flags':: 5065 5066``0`` 5067 5068To use this mode, clear the 'flags' field. 5069 5070In this mode each event will contain an event select + unit mask. 5071 5072When the guest attempts to program the PMU the guest's event select + 5073unit mask is compared against the filter events to determine whether the 5074guest should have access. 5075 5076``KVM_PMU_EVENT_FLAG_MASKED_EVENTS`` 5077:Capability: KVM_CAP_PMU_EVENT_MASKED_EVENTS 5078 5079In this mode each filter event will contain an event select, mask, match, and 5080exclude value. To encode a masked event use:: 5081 5082 KVM_PMU_ENCODE_MASKED_ENTRY() 5083 5084An encoded event will follow this layout:: 5085 5086 Bits Description 5087 ---- ----------- 5088 7:0 event select (low bits) 5089 15:8 umask match 5090 31:16 unused 5091 35:32 event select (high bits) 5092 36:54 unused 5093 55 exclude bit 5094 63:56 umask mask 5095 5096When the guest attempts to program the PMU, these steps are followed in 5097determining if the guest should have access: 5098 5099 1. Match the event select from the guest against the filter events. 5100 2. If a match is found, match the guest's unit mask to the mask and match 5101 values of the included filter events. 5102 I.e. (unit mask & mask) == match && !exclude. 5103 3. If a match is found, match the guest's unit mask to the mask and match 5104 values of the excluded filter events. 5105 I.e. (unit mask & mask) == match && exclude. 5106 4. 5107 a. If an included match is found and an excluded match is not found, filter 5108 the event. 5109 b. For everything else, do not filter the event. 5110 5. 5111 a. If the event is filtered and it's an allow list, allow the guest to 5112 program the event. 5113 b. If the event is filtered and it's a deny list, do not allow the guest to 5114 program the event. 5115 5116When setting a new pmu event filter, -EINVAL will be returned if any of the 5117unused fields are set or if any of the high bits (35:32) in the event 5118select are set when called on Intel. 5119 5120Valid values for 'action':: 5121 5122 #define KVM_PMU_EVENT_ALLOW 0 5123 #define KVM_PMU_EVENT_DENY 1 5124 51254.121 KVM_PPC_SVM_OFF 5126--------------------- 5127 5128:Capability: basic 5129:Architectures: powerpc 5130:Type: vm ioctl 5131:Parameters: none 5132:Returns: 0 on successful completion, 5133 5134Errors: 5135 5136 ====== ================================================================ 5137 EINVAL if ultravisor failed to terminate the secure guest 5138 ENOMEM if hypervisor failed to allocate new radix page tables for guest 5139 ====== ================================================================ 5140 5141This ioctl is used to turn off the secure mode of the guest or transition 5142the guest from secure mode to normal mode. This is invoked when the guest 5143is reset. This has no effect if called for a normal guest. 5144 5145This ioctl issues an ultravisor call to terminate the secure guest, 5146unpins the VPA pages and releases all the device pages that are used to 5147track the secure pages by hypervisor. 5148 51494.122 KVM_S390_NORMAL_RESET 5150--------------------------- 5151 5152:Capability: KVM_CAP_S390_VCPU_RESETS 5153:Architectures: s390 5154:Type: vcpu ioctl 5155:Parameters: none 5156:Returns: 0 5157 5158This ioctl resets VCPU registers and control structures according to 5159the cpu reset definition in the POP (Principles Of Operation). 5160 51614.123 KVM_S390_INITIAL_RESET 5162---------------------------- 5163 5164:Capability: none 5165:Architectures: s390 5166:Type: vcpu ioctl 5167:Parameters: none 5168:Returns: 0 5169 5170This ioctl resets VCPU registers and control structures according to 5171the initial cpu reset definition in the POP. However, the cpu is not 5172put into ESA mode. This reset is a superset of the normal reset. 5173 51744.124 KVM_S390_CLEAR_RESET 5175-------------------------- 5176 5177:Capability: KVM_CAP_S390_VCPU_RESETS 5178:Architectures: s390 5179:Type: vcpu ioctl 5180:Parameters: none 5181:Returns: 0 5182 5183This ioctl resets VCPU registers and control structures according to 5184the clear cpu reset definition in the POP. However, the cpu is not put 5185into ESA mode. This reset is a superset of the initial reset. 5186 5187 51884.125 KVM_S390_PV_COMMAND 5189------------------------- 5190 5191:Capability: KVM_CAP_S390_PROTECTED 5192:Architectures: s390 5193:Type: vm ioctl 5194:Parameters: struct kvm_pv_cmd 5195:Returns: 0 on success, < 0 on error 5196 5197:: 5198 5199 struct kvm_pv_cmd { 5200 __u32 cmd; /* Command to be executed */ 5201 __u16 rc; /* Ultravisor return code */ 5202 __u16 rrc; /* Ultravisor return reason code */ 5203 __u64 data; /* Data or address */ 5204 __u32 flags; /* flags for future extensions. Must be 0 for now */ 5205 __u32 reserved[3]; 5206 }; 5207 5208**Ultravisor return codes** 5209The Ultravisor return (reason) codes are provided by the kernel if a 5210Ultravisor call has been executed to achieve the results expected by 5211the command. Therefore they are independent of the IOCTL return 5212code. If KVM changes `rc`, its value will always be greater than 0 5213hence setting it to 0 before issuing a PV command is advised to be 5214able to detect a change of `rc`. 5215 5216**cmd values:** 5217 5218KVM_PV_ENABLE 5219 Allocate memory and register the VM with the Ultravisor, thereby 5220 donating memory to the Ultravisor that will become inaccessible to 5221 KVM. All existing CPUs are converted to protected ones. After this 5222 command has succeeded, any CPU added via hotplug will become 5223 protected during its creation as well. 5224 5225 Errors: 5226 5227 ===== ============================= 5228 EINTR an unmasked signal is pending 5229 ===== ============================= 5230 5231KVM_PV_DISABLE 5232 Deregister the VM from the Ultravisor and reclaim the memory that had 5233 been donated to the Ultravisor, making it usable by the kernel again. 5234 All registered VCPUs are converted back to non-protected ones. If a 5235 previous protected VM had been prepared for asynchonous teardown with 5236 KVM_PV_ASYNC_CLEANUP_PREPARE and not subsequently torn down with 5237 KVM_PV_ASYNC_CLEANUP_PERFORM, it will be torn down in this call 5238 together with the current protected VM. 5239 5240KVM_PV_VM_SET_SEC_PARMS 5241 Pass the image header from VM memory to the Ultravisor in 5242 preparation of image unpacking and verification. 5243 5244KVM_PV_VM_UNPACK 5245 Unpack (protect and decrypt) a page of the encrypted boot image. 5246 5247KVM_PV_VM_VERIFY 5248 Verify the integrity of the unpacked image. Only if this succeeds, 5249 KVM is allowed to start protected VCPUs. 5250 5251KVM_PV_INFO 5252 :Capability: KVM_CAP_S390_PROTECTED_DUMP 5253 5254 Presents an API that provides Ultravisor related data to userspace 5255 via subcommands. len_max is the size of the user space buffer, 5256 len_written is KVM's indication of how much bytes of that buffer 5257 were actually written to. len_written can be used to determine the 5258 valid fields if more response fields are added in the future. 5259 5260 :: 5261 5262 enum pv_cmd_info_id { 5263 KVM_PV_INFO_VM, 5264 KVM_PV_INFO_DUMP, 5265 }; 5266 5267 struct kvm_s390_pv_info_header { 5268 __u32 id; 5269 __u32 len_max; 5270 __u32 len_written; 5271 __u32 reserved; 5272 }; 5273 5274 struct kvm_s390_pv_info { 5275 struct kvm_s390_pv_info_header header; 5276 struct kvm_s390_pv_info_dump dump; 5277 struct kvm_s390_pv_info_vm vm; 5278 }; 5279 5280**subcommands:** 5281 5282 KVM_PV_INFO_VM 5283 This subcommand provides basic Ultravisor information for PV 5284 hosts. These values are likely also exported as files in the sysfs 5285 firmware UV query interface but they are more easily available to 5286 programs in this API. 5287 5288 The installed calls and feature_indication members provide the 5289 installed UV calls and the UV's other feature indications. 5290 5291 The max_* members provide information about the maximum number of PV 5292 vcpus, PV guests and PV guest memory size. 5293 5294 :: 5295 5296 struct kvm_s390_pv_info_vm { 5297 __u64 inst_calls_list[4]; 5298 __u64 max_cpus; 5299 __u64 max_guests; 5300 __u64 max_guest_addr; 5301 __u64 feature_indication; 5302 }; 5303 5304 5305 KVM_PV_INFO_DUMP 5306 This subcommand provides information related to dumping PV guests. 5307 5308 :: 5309 5310 struct kvm_s390_pv_info_dump { 5311 __u64 dump_cpu_buffer_len; 5312 __u64 dump_config_mem_buffer_per_1m; 5313 __u64 dump_config_finalize_len; 5314 }; 5315 5316KVM_PV_DUMP 5317 :Capability: KVM_CAP_S390_PROTECTED_DUMP 5318 5319 Presents an API that provides calls which facilitate dumping a 5320 protected VM. 5321 5322 :: 5323 5324 struct kvm_s390_pv_dmp { 5325 __u64 subcmd; 5326 __u64 buff_addr; 5327 __u64 buff_len; 5328 __u64 gaddr; /* For dump storage state */ 5329 }; 5330 5331 **subcommands:** 5332 5333 KVM_PV_DUMP_INIT 5334 Initializes the dump process of a protected VM. If this call does 5335 not succeed all other subcommands will fail with -EINVAL. This 5336 subcommand will return -EINVAL if a dump process has not yet been 5337 completed. 5338 5339 Not all PV vms can be dumped, the owner needs to set `dump 5340 allowed` PCF bit 34 in the SE header to allow dumping. 5341 5342 KVM_PV_DUMP_CONFIG_STOR_STATE 5343 Stores `buff_len` bytes of tweak component values starting with 5344 the 1MB block specified by the absolute guest address 5345 (`gaddr`). `buff_len` needs to be `conf_dump_storage_state_len` 5346 aligned and at least >= the `conf_dump_storage_state_len` value 5347 provided by the dump uv_info data. buff_user might be written to 5348 even if an error rc is returned. For instance if we encounter a 5349 fault after writing the first page of data. 5350 5351 KVM_PV_DUMP_COMPLETE 5352 If the subcommand succeeds it completes the dump process and lets 5353 KVM_PV_DUMP_INIT be called again. 5354 5355 On success `conf_dump_finalize_len` bytes of completion data will be 5356 stored to the `buff_addr`. The completion data contains a key 5357 derivation seed, IV, tweak nonce and encryption keys as well as an 5358 authentication tag all of which are needed to decrypt the dump at a 5359 later time. 5360 5361KVM_PV_ASYNC_CLEANUP_PREPARE 5362 :Capability: KVM_CAP_S390_PROTECTED_ASYNC_DISABLE 5363 5364 Prepare the current protected VM for asynchronous teardown. Most 5365 resources used by the current protected VM will be set aside for a 5366 subsequent asynchronous teardown. The current protected VM will then 5367 resume execution immediately as non-protected. There can be at most 5368 one protected VM prepared for asynchronous teardown at any time. If 5369 a protected VM had already been prepared for teardown without 5370 subsequently calling KVM_PV_ASYNC_CLEANUP_PERFORM, this call will 5371 fail. In that case, the userspace process should issue a normal 5372 KVM_PV_DISABLE. The resources set aside with this call will need to 5373 be cleaned up with a subsequent call to KVM_PV_ASYNC_CLEANUP_PERFORM 5374 or KVM_PV_DISABLE, otherwise they will be cleaned up when KVM 5375 terminates. KVM_PV_ASYNC_CLEANUP_PREPARE can be called again as soon 5376 as cleanup starts, i.e. before KVM_PV_ASYNC_CLEANUP_PERFORM finishes. 5377 5378KVM_PV_ASYNC_CLEANUP_PERFORM 5379 :Capability: KVM_CAP_S390_PROTECTED_ASYNC_DISABLE 5380 5381 Tear down the protected VM previously prepared for teardown with 5382 KVM_PV_ASYNC_CLEANUP_PREPARE. The resources that had been set aside 5383 will be freed during the execution of this command. This PV command 5384 should ideally be issued by userspace from a separate thread. If a 5385 fatal signal is received (or the process terminates naturally), the 5386 command will terminate immediately without completing, and the normal 5387 KVM shutdown procedure will take care of cleaning up all remaining 5388 protected VMs, including the ones whose teardown was interrupted by 5389 process termination. 5390 53914.126 KVM_XEN_HVM_SET_ATTR 5392-------------------------- 5393 5394:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO 5395:Architectures: x86 5396:Type: vm ioctl 5397:Parameters: struct kvm_xen_hvm_attr 5398:Returns: 0 on success, < 0 on error 5399 5400:: 5401 5402 struct kvm_xen_hvm_attr { 5403 __u16 type; 5404 __u16 pad[3]; 5405 union { 5406 __u8 long_mode; 5407 __u8 vector; 5408 __u8 runstate_update_flag; 5409 struct { 5410 __u64 gfn; 5411 } shared_info; 5412 struct { 5413 __u32 send_port; 5414 __u32 type; /* EVTCHNSTAT_ipi / EVTCHNSTAT_interdomain */ 5415 __u32 flags; 5416 union { 5417 struct { 5418 __u32 port; 5419 __u32 vcpu; 5420 __u32 priority; 5421 } port; 5422 struct { 5423 __u32 port; /* Zero for eventfd */ 5424 __s32 fd; 5425 } eventfd; 5426 __u32 padding[4]; 5427 } deliver; 5428 } evtchn; 5429 __u32 xen_version; 5430 __u64 pad[8]; 5431 } u; 5432 }; 5433 5434type values: 5435 5436KVM_XEN_ATTR_TYPE_LONG_MODE 5437 Sets the ABI mode of the VM to 32-bit or 64-bit (long mode). This 5438 determines the layout of the shared info pages exposed to the VM. 5439 5440KVM_XEN_ATTR_TYPE_SHARED_INFO 5441 Sets the guest physical frame number at which the Xen "shared info" 5442 page resides. Note that although Xen places vcpu_info for the first 5443 32 vCPUs in the shared_info page, KVM does not automatically do so 5444 and instead requires that KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO be used 5445 explicitly even when the vcpu_info for a given vCPU resides at the 5446 "default" location in the shared_info page. This is because KVM may 5447 not be aware of the Xen CPU id which is used as the index into the 5448 vcpu_info[] array, so may know the correct default location. 5449 5450 Note that the shared info page may be constantly written to by KVM; 5451 it contains the event channel bitmap used to deliver interrupts to 5452 a Xen guest, amongst other things. It is exempt from dirty tracking 5453 mechanisms — KVM will not explicitly mark the page as dirty each 5454 time an event channel interrupt is delivered to the guest! Thus, 5455 userspace should always assume that the designated GFN is dirty if 5456 any vCPU has been running or any event channel interrupts can be 5457 routed to the guest. 5458 5459 Setting the gfn to KVM_XEN_INVALID_GFN will disable the shared info 5460 page. 5461 5462KVM_XEN_ATTR_TYPE_UPCALL_VECTOR 5463 Sets the exception vector used to deliver Xen event channel upcalls. 5464 This is the HVM-wide vector injected directly by the hypervisor 5465 (not through the local APIC), typically configured by a guest via 5466 HVM_PARAM_CALLBACK_IRQ. This can be disabled again (e.g. for guest 5467 SHUTDOWN_soft_reset) by setting it to zero. 5468 5469KVM_XEN_ATTR_TYPE_EVTCHN 5470 This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates 5471 support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It configures 5472 an outbound port number for interception of EVTCHNOP_send requests 5473 from the guest. A given sending port number may be directed back to 5474 a specified vCPU (by APIC ID) / port / priority on the guest, or to 5475 trigger events on an eventfd. The vCPU and priority can be changed 5476 by setting KVM_XEN_EVTCHN_UPDATE in a subsequent call, but but other 5477 fields cannot change for a given sending port. A port mapping is 5478 removed by using KVM_XEN_EVTCHN_DEASSIGN in the flags field. Passing 5479 KVM_XEN_EVTCHN_RESET in the flags field removes all interception of 5480 outbound event channels. The values of the flags field are mutually 5481 exclusive and cannot be combined as a bitmask. 5482 5483KVM_XEN_ATTR_TYPE_XEN_VERSION 5484 This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates 5485 support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It configures 5486 the 32-bit version code returned to the guest when it invokes the 5487 XENVER_version call; typically (XEN_MAJOR << 16 | XEN_MINOR). PV 5488 Xen guests will often use this to as a dummy hypercall to trigger 5489 event channel delivery, so responding within the kernel without 5490 exiting to userspace is beneficial. 5491 5492KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG 5493 This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates 5494 support for KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG. It enables the 5495 XEN_RUNSTATE_UPDATE flag which allows guest vCPUs to safely read 5496 other vCPUs' vcpu_runstate_info. Xen guests enable this feature via 5497 the VMASST_TYPE_runstate_update_flag of the HYPERVISOR_vm_assist 5498 hypercall. 5499 55004.127 KVM_XEN_HVM_GET_ATTR 5501-------------------------- 5502 5503:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO 5504:Architectures: x86 5505:Type: vm ioctl 5506:Parameters: struct kvm_xen_hvm_attr 5507:Returns: 0 on success, < 0 on error 5508 5509Allows Xen VM attributes to be read. For the structure and types, 5510see KVM_XEN_HVM_SET_ATTR above. The KVM_XEN_ATTR_TYPE_EVTCHN 5511attribute cannot be read. 5512 55134.128 KVM_XEN_VCPU_SET_ATTR 5514--------------------------- 5515 5516:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO 5517:Architectures: x86 5518:Type: vcpu ioctl 5519:Parameters: struct kvm_xen_vcpu_attr 5520:Returns: 0 on success, < 0 on error 5521 5522:: 5523 5524 struct kvm_xen_vcpu_attr { 5525 __u16 type; 5526 __u16 pad[3]; 5527 union { 5528 __u64 gpa; 5529 __u64 pad[4]; 5530 struct { 5531 __u64 state; 5532 __u64 state_entry_time; 5533 __u64 time_running; 5534 __u64 time_runnable; 5535 __u64 time_blocked; 5536 __u64 time_offline; 5537 } runstate; 5538 __u32 vcpu_id; 5539 struct { 5540 __u32 port; 5541 __u32 priority; 5542 __u64 expires_ns; 5543 } timer; 5544 __u8 vector; 5545 } u; 5546 }; 5547 5548type values: 5549 5550KVM_XEN_VCPU_ATTR_TYPE_VCPU_INFO 5551 Sets the guest physical address of the vcpu_info for a given vCPU. 5552 As with the shared_info page for the VM, the corresponding page may be 5553 dirtied at any time if event channel interrupt delivery is enabled, so 5554 userspace should always assume that the page is dirty without relying 5555 on dirty logging. Setting the gpa to KVM_XEN_INVALID_GPA will disable 5556 the vcpu_info. 5557 5558KVM_XEN_VCPU_ATTR_TYPE_VCPU_TIME_INFO 5559 Sets the guest physical address of an additional pvclock structure 5560 for a given vCPU. This is typically used for guest vsyscall support. 5561 Setting the gpa to KVM_XEN_INVALID_GPA will disable the structure. 5562 5563KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADDR 5564 Sets the guest physical address of the vcpu_runstate_info for a given 5565 vCPU. This is how a Xen guest tracks CPU state such as steal time. 5566 Setting the gpa to KVM_XEN_INVALID_GPA will disable the runstate area. 5567 5568KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT 5569 Sets the runstate (RUNSTATE_running/_runnable/_blocked/_offline) of 5570 the given vCPU from the .u.runstate.state member of the structure. 5571 KVM automatically accounts running and runnable time but blocked 5572 and offline states are only entered explicitly. 5573 5574KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA 5575 Sets all fields of the vCPU runstate data from the .u.runstate member 5576 of the structure, including the current runstate. The state_entry_time 5577 must equal the sum of the other four times. 5578 5579KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST 5580 This *adds* the contents of the .u.runstate members of the structure 5581 to the corresponding members of the given vCPU's runstate data, thus 5582 permitting atomic adjustments to the runstate times. The adjustment 5583 to the state_entry_time must equal the sum of the adjustments to the 5584 other four times. The state field must be set to -1, or to a valid 5585 runstate value (RUNSTATE_running, RUNSTATE_runnable, RUNSTATE_blocked 5586 or RUNSTATE_offline) to set the current accounted state as of the 5587 adjusted state_entry_time. 5588 5589KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID 5590 This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates 5591 support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the Xen 5592 vCPU ID of the given vCPU, to allow timer-related VCPU operations to 5593 be intercepted by KVM. 5594 5595KVM_XEN_VCPU_ATTR_TYPE_TIMER 5596 This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates 5597 support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the 5598 event channel port/priority for the VIRQ_TIMER of the vCPU, as well 5599 as allowing a pending timer to be saved/restored. Setting the timer 5600 port to zero disables kernel handling of the singleshot timer. 5601 5602KVM_XEN_VCPU_ATTR_TYPE_UPCALL_VECTOR 5603 This attribute is available when the KVM_CAP_XEN_HVM ioctl indicates 5604 support for KVM_XEN_HVM_CONFIG_EVTCHN_SEND features. It sets the 5605 per-vCPU local APIC upcall vector, configured by a Xen guest with 5606 the HVMOP_set_evtchn_upcall_vector hypercall. This is typically 5607 used by Windows guests, and is distinct from the HVM-wide upcall 5608 vector configured with HVM_PARAM_CALLBACK_IRQ. It is disabled by 5609 setting the vector to zero. 5610 5611 56124.129 KVM_XEN_VCPU_GET_ATTR 5613--------------------------- 5614 5615:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_SHARED_INFO 5616:Architectures: x86 5617:Type: vcpu ioctl 5618:Parameters: struct kvm_xen_vcpu_attr 5619:Returns: 0 on success, < 0 on error 5620 5621Allows Xen vCPU attributes to be read. For the structure and types, 5622see KVM_XEN_VCPU_SET_ATTR above. 5623 5624The KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST type may not be used 5625with the KVM_XEN_VCPU_GET_ATTR ioctl. 5626 56274.130 KVM_ARM_MTE_COPY_TAGS 5628--------------------------- 5629 5630:Capability: KVM_CAP_ARM_MTE 5631:Architectures: arm64 5632:Type: vm ioctl 5633:Parameters: struct kvm_arm_copy_mte_tags 5634:Returns: number of bytes copied, < 0 on error (-EINVAL for incorrect 5635 arguments, -EFAULT if memory cannot be accessed). 5636 5637:: 5638 5639 struct kvm_arm_copy_mte_tags { 5640 __u64 guest_ipa; 5641 __u64 length; 5642 void __user *addr; 5643 __u64 flags; 5644 __u64 reserved[2]; 5645 }; 5646 5647Copies Memory Tagging Extension (MTE) tags to/from guest tag memory. The 5648``guest_ipa`` and ``length`` fields must be ``PAGE_SIZE`` aligned. The ``addr`` 5649field must point to a buffer which the tags will be copied to or from. 5650 5651``flags`` specifies the direction of copy, either ``KVM_ARM_TAGS_TO_GUEST`` or 5652``KVM_ARM_TAGS_FROM_GUEST``. 5653 5654The size of the buffer to store the tags is ``(length / 16)`` bytes 5655(granules in MTE are 16 bytes long). Each byte contains a single tag 5656value. This matches the format of ``PTRACE_PEEKMTETAGS`` and 5657``PTRACE_POKEMTETAGS``. 5658 5659If an error occurs before any data is copied then a negative error code is 5660returned. If some tags have been copied before an error occurs then the number 5661of bytes successfully copied is returned. If the call completes successfully 5662then ``length`` is returned. 5663 56644.131 KVM_GET_SREGS2 5665-------------------- 5666 5667:Capability: KVM_CAP_SREGS2 5668:Architectures: x86 5669:Type: vcpu ioctl 5670:Parameters: struct kvm_sregs2 (out) 5671:Returns: 0 on success, -1 on error 5672 5673Reads special registers from the vcpu. 5674This ioctl (when supported) replaces the KVM_GET_SREGS. 5675 5676:: 5677 5678 struct kvm_sregs2 { 5679 /* out (KVM_GET_SREGS2) / in (KVM_SET_SREGS2) */ 5680 struct kvm_segment cs, ds, es, fs, gs, ss; 5681 struct kvm_segment tr, ldt; 5682 struct kvm_dtable gdt, idt; 5683 __u64 cr0, cr2, cr3, cr4, cr8; 5684 __u64 efer; 5685 __u64 apic_base; 5686 __u64 flags; 5687 __u64 pdptrs[4]; 5688 }; 5689 5690flags values for ``kvm_sregs2``: 5691 5692``KVM_SREGS2_FLAGS_PDPTRS_VALID`` 5693 5694 Indicates thats the struct contain valid PDPTR values. 5695 5696 56974.132 KVM_SET_SREGS2 5698-------------------- 5699 5700:Capability: KVM_CAP_SREGS2 5701:Architectures: x86 5702:Type: vcpu ioctl 5703:Parameters: struct kvm_sregs2 (in) 5704:Returns: 0 on success, -1 on error 5705 5706Writes special registers into the vcpu. 5707See KVM_GET_SREGS2 for the data structures. 5708This ioctl (when supported) replaces the KVM_SET_SREGS. 5709 57104.133 KVM_GET_STATS_FD 5711---------------------- 5712 5713:Capability: KVM_CAP_STATS_BINARY_FD 5714:Architectures: all 5715:Type: vm ioctl, vcpu ioctl 5716:Parameters: none 5717:Returns: statistics file descriptor on success, < 0 on error 5718 5719Errors: 5720 5721 ====== ====================================================== 5722 ENOMEM if the fd could not be created due to lack of memory 5723 EMFILE if the number of opened files exceeds the limit 5724 ====== ====================================================== 5725 5726The returned file descriptor can be used to read VM/vCPU statistics data in 5727binary format. The data in the file descriptor consists of four blocks 5728organized as follows: 5729 5730+-------------+ 5731| Header | 5732+-------------+ 5733| id string | 5734+-------------+ 5735| Descriptors | 5736+-------------+ 5737| Stats Data | 5738+-------------+ 5739 5740Apart from the header starting at offset 0, please be aware that it is 5741not guaranteed that the four blocks are adjacent or in the above order; 5742the offsets of the id, descriptors and data blocks are found in the 5743header. However, all four blocks are aligned to 64 bit offsets in the 5744file and they do not overlap. 5745 5746All blocks except the data block are immutable. Userspace can read them 5747only one time after retrieving the file descriptor, and then use ``pread`` or 5748``lseek`` to read the statistics repeatedly. 5749 5750All data is in system endianness. 5751 5752The format of the header is as follows:: 5753 5754 struct kvm_stats_header { 5755 __u32 flags; 5756 __u32 name_size; 5757 __u32 num_desc; 5758 __u32 id_offset; 5759 __u32 desc_offset; 5760 __u32 data_offset; 5761 }; 5762 5763The ``flags`` field is not used at the moment. It is always read as 0. 5764 5765The ``name_size`` field is the size (in byte) of the statistics name string 5766(including trailing '\0') which is contained in the "id string" block and 5767appended at the end of every descriptor. 5768 5769The ``num_desc`` field is the number of descriptors that are included in the 5770descriptor block. (The actual number of values in the data block may be 5771larger, since each descriptor may comprise more than one value). 5772 5773The ``id_offset`` field is the offset of the id string from the start of the 5774file indicated by the file descriptor. It is a multiple of 8. 5775 5776The ``desc_offset`` field is the offset of the Descriptors block from the start 5777of the file indicated by the file descriptor. It is a multiple of 8. 5778 5779The ``data_offset`` field is the offset of the Stats Data block from the start 5780of the file indicated by the file descriptor. It is a multiple of 8. 5781 5782The id string block contains a string which identifies the file descriptor on 5783which KVM_GET_STATS_FD was invoked. The size of the block, including the 5784trailing ``'\0'``, is indicated by the ``name_size`` field in the header. 5785 5786The descriptors block is only needed to be read once for the lifetime of the 5787file descriptor contains a sequence of ``struct kvm_stats_desc``, each followed 5788by a string of size ``name_size``. 5789:: 5790 5791 #define KVM_STATS_TYPE_SHIFT 0 5792 #define KVM_STATS_TYPE_MASK (0xF << KVM_STATS_TYPE_SHIFT) 5793 #define KVM_STATS_TYPE_CUMULATIVE (0x0 << KVM_STATS_TYPE_SHIFT) 5794 #define KVM_STATS_TYPE_INSTANT (0x1 << KVM_STATS_TYPE_SHIFT) 5795 #define KVM_STATS_TYPE_PEAK (0x2 << KVM_STATS_TYPE_SHIFT) 5796 #define KVM_STATS_TYPE_LINEAR_HIST (0x3 << KVM_STATS_TYPE_SHIFT) 5797 #define KVM_STATS_TYPE_LOG_HIST (0x4 << KVM_STATS_TYPE_SHIFT) 5798 #define KVM_STATS_TYPE_MAX KVM_STATS_TYPE_LOG_HIST 5799 5800 #define KVM_STATS_UNIT_SHIFT 4 5801 #define KVM_STATS_UNIT_MASK (0xF << KVM_STATS_UNIT_SHIFT) 5802 #define KVM_STATS_UNIT_NONE (0x0 << KVM_STATS_UNIT_SHIFT) 5803 #define KVM_STATS_UNIT_BYTES (0x1 << KVM_STATS_UNIT_SHIFT) 5804 #define KVM_STATS_UNIT_SECONDS (0x2 << KVM_STATS_UNIT_SHIFT) 5805 #define KVM_STATS_UNIT_CYCLES (0x3 << KVM_STATS_UNIT_SHIFT) 5806 #define KVM_STATS_UNIT_BOOLEAN (0x4 << KVM_STATS_UNIT_SHIFT) 5807 #define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_BOOLEAN 5808 5809 #define KVM_STATS_BASE_SHIFT 8 5810 #define KVM_STATS_BASE_MASK (0xF << KVM_STATS_BASE_SHIFT) 5811 #define KVM_STATS_BASE_POW10 (0x0 << KVM_STATS_BASE_SHIFT) 5812 #define KVM_STATS_BASE_POW2 (0x1 << KVM_STATS_BASE_SHIFT) 5813 #define KVM_STATS_BASE_MAX KVM_STATS_BASE_POW2 5814 5815 struct kvm_stats_desc { 5816 __u32 flags; 5817 __s16 exponent; 5818 __u16 size; 5819 __u32 offset; 5820 __u32 bucket_size; 5821 char name[]; 5822 }; 5823 5824The ``flags`` field contains the type and unit of the statistics data described 5825by this descriptor. Its endianness is CPU native. 5826The following flags are supported: 5827 5828Bits 0-3 of ``flags`` encode the type: 5829 5830 * ``KVM_STATS_TYPE_CUMULATIVE`` 5831 The statistics reports a cumulative count. The value of data can only be increased. 5832 Most of the counters used in KVM are of this type. 5833 The corresponding ``size`` field for this type is always 1. 5834 All cumulative statistics data are read/write. 5835 * ``KVM_STATS_TYPE_INSTANT`` 5836 The statistics reports an instantaneous value. Its value can be increased or 5837 decreased. This type is usually used as a measurement of some resources, 5838 like the number of dirty pages, the number of large pages, etc. 5839 All instant statistics are read only. 5840 The corresponding ``size`` field for this type is always 1. 5841 * ``KVM_STATS_TYPE_PEAK`` 5842 The statistics data reports a peak value, for example the maximum number 5843 of items in a hash table bucket, the longest time waited and so on. 5844 The value of data can only be increased. 5845 The corresponding ``size`` field for this type is always 1. 5846 * ``KVM_STATS_TYPE_LINEAR_HIST`` 5847 The statistic is reported as a linear histogram. The number of 5848 buckets is specified by the ``size`` field. The size of buckets is specified 5849 by the ``hist_param`` field. The range of the Nth bucket (1 <= N < ``size``) 5850 is [``hist_param``*(N-1), ``hist_param``*N), while the range of the last 5851 bucket is [``hist_param``*(``size``-1), +INF). (+INF means positive infinity 5852 value.) 5853 * ``KVM_STATS_TYPE_LOG_HIST`` 5854 The statistic is reported as a logarithmic histogram. The number of 5855 buckets is specified by the ``size`` field. The range of the first bucket is 5856 [0, 1), while the range of the last bucket is [pow(2, ``size``-2), +INF). 5857 Otherwise, The Nth bucket (1 < N < ``size``) covers 5858 [pow(2, N-2), pow(2, N-1)). 5859 5860Bits 4-7 of ``flags`` encode the unit: 5861 5862 * ``KVM_STATS_UNIT_NONE`` 5863 There is no unit for the value of statistics data. This usually means that 5864 the value is a simple counter of an event. 5865 * ``KVM_STATS_UNIT_BYTES`` 5866 It indicates that the statistics data is used to measure memory size, in the 5867 unit of Byte, KiByte, MiByte, GiByte, etc. The unit of the data is 5868 determined by the ``exponent`` field in the descriptor. 5869 * ``KVM_STATS_UNIT_SECONDS`` 5870 It indicates that the statistics data is used to measure time or latency. 5871 * ``KVM_STATS_UNIT_CYCLES`` 5872 It indicates that the statistics data is used to measure CPU clock cycles. 5873 * ``KVM_STATS_UNIT_BOOLEAN`` 5874 It indicates that the statistic will always be either 0 or 1. Boolean 5875 statistics of "peak" type will never go back from 1 to 0. Boolean 5876 statistics can be linear histograms (with two buckets) but not logarithmic 5877 histograms. 5878 5879Note that, in the case of histograms, the unit applies to the bucket 5880ranges, while the bucket value indicates how many samples fell in the 5881bucket's range. 5882 5883Bits 8-11 of ``flags``, together with ``exponent``, encode the scale of the 5884unit: 5885 5886 * ``KVM_STATS_BASE_POW10`` 5887 The scale is based on power of 10. It is used for measurement of time and 5888 CPU clock cycles. For example, an exponent of -9 can be used with 5889 ``KVM_STATS_UNIT_SECONDS`` to express that the unit is nanoseconds. 5890 * ``KVM_STATS_BASE_POW2`` 5891 The scale is based on power of 2. It is used for measurement of memory size. 5892 For example, an exponent of 20 can be used with ``KVM_STATS_UNIT_BYTES`` to 5893 express that the unit is MiB. 5894 5895The ``size`` field is the number of values of this statistics data. Its 5896value is usually 1 for most of simple statistics. 1 means it contains an 5897unsigned 64bit data. 5898 5899The ``offset`` field is the offset from the start of Data Block to the start of 5900the corresponding statistics data. 5901 5902The ``bucket_size`` field is used as a parameter for histogram statistics data. 5903It is only used by linear histogram statistics data, specifying the size of a 5904bucket in the unit expressed by bits 4-11 of ``flags`` together with ``exponent``. 5905 5906The ``name`` field is the name string of the statistics data. The name string 5907starts at the end of ``struct kvm_stats_desc``. The maximum length including 5908the trailing ``'\0'``, is indicated by ``name_size`` in the header. 5909 5910The Stats Data block contains an array of 64-bit values in the same order 5911as the descriptors in Descriptors block. 5912 59134.134 KVM_GET_XSAVE2 5914-------------------- 5915 5916:Capability: KVM_CAP_XSAVE2 5917:Architectures: x86 5918:Type: vcpu ioctl 5919:Parameters: struct kvm_xsave (out) 5920:Returns: 0 on success, -1 on error 5921 5922 5923:: 5924 5925 struct kvm_xsave { 5926 __u32 region[1024]; 5927 __u32 extra[0]; 5928 }; 5929 5930This ioctl would copy current vcpu's xsave struct to the userspace. It 5931copies as many bytes as are returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2) 5932when invoked on the vm file descriptor. The size value returned by 5933KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2) will always be at least 4096. 5934Currently, it is only greater than 4096 if a dynamic feature has been 5935enabled with ``arch_prctl()``, but this may change in the future. 5936 5937The offsets of the state save areas in struct kvm_xsave follow the contents 5938of CPUID leaf 0xD on the host. 5939 59404.135 KVM_XEN_HVM_EVTCHN_SEND 5941----------------------------- 5942 5943:Capability: KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND 5944:Architectures: x86 5945:Type: vm ioctl 5946:Parameters: struct kvm_irq_routing_xen_evtchn 5947:Returns: 0 on success, < 0 on error 5948 5949 5950:: 5951 5952 struct kvm_irq_routing_xen_evtchn { 5953 __u32 port; 5954 __u32 vcpu; 5955 __u32 priority; 5956 }; 5957 5958This ioctl injects an event channel interrupt directly to the guest vCPU. 5959 59604.136 KVM_S390_PV_CPU_COMMAND 5961----------------------------- 5962 5963:Capability: KVM_CAP_S390_PROTECTED_DUMP 5964:Architectures: s390 5965:Type: vcpu ioctl 5966:Parameters: none 5967:Returns: 0 on success, < 0 on error 5968 5969This ioctl closely mirrors `KVM_S390_PV_COMMAND` but handles requests 5970for vcpus. It re-uses the kvm_s390_pv_dmp struct and hence also shares 5971the command ids. 5972 5973**command:** 5974 5975KVM_PV_DUMP 5976 Presents an API that provides calls which facilitate dumping a vcpu 5977 of a protected VM. 5978 5979**subcommand:** 5980 5981KVM_PV_DUMP_CPU 5982 Provides encrypted dump data like register values. 5983 The length of the returned data is provided by uv_info.guest_cpu_stor_len. 5984 59854.137 KVM_S390_ZPCI_OP 5986---------------------- 5987 5988:Capability: KVM_CAP_S390_ZPCI_OP 5989:Architectures: s390 5990:Type: vm ioctl 5991:Parameters: struct kvm_s390_zpci_op (in) 5992:Returns: 0 on success, <0 on error 5993 5994Used to manage hardware-assisted virtualization features for zPCI devices. 5995 5996Parameters are specified via the following structure:: 5997 5998 struct kvm_s390_zpci_op { 5999 /* in */ 6000 __u32 fh; /* target device */ 6001 __u8 op; /* operation to perform */ 6002 __u8 pad[3]; 6003 union { 6004 /* for KVM_S390_ZPCIOP_REG_AEN */ 6005 struct { 6006 __u64 ibv; /* Guest addr of interrupt bit vector */ 6007 __u64 sb; /* Guest addr of summary bit */ 6008 __u32 flags; 6009 __u32 noi; /* Number of interrupts */ 6010 __u8 isc; /* Guest interrupt subclass */ 6011 __u8 sbo; /* Offset of guest summary bit vector */ 6012 __u16 pad; 6013 } reg_aen; 6014 __u64 reserved[8]; 6015 } u; 6016 }; 6017 6018The type of operation is specified in the "op" field. 6019KVM_S390_ZPCIOP_REG_AEN is used to register the VM for adapter event 6020notification interpretation, which will allow firmware delivery of adapter 6021events directly to the vm, with KVM providing a backup delivery mechanism; 6022KVM_S390_ZPCIOP_DEREG_AEN is used to subsequently disable interpretation of 6023adapter event notifications. 6024 6025The target zPCI function must also be specified via the "fh" field. For the 6026KVM_S390_ZPCIOP_REG_AEN operation, additional information to establish firmware 6027delivery must be provided via the "reg_aen" struct. 6028 6029The "pad" and "reserved" fields may be used for future extensions and should be 6030set to 0s by userspace. 6031 60325. The kvm_run structure 6033======================== 6034 6035Application code obtains a pointer to the kvm_run structure by 6036mmap()ing a vcpu fd. From that point, application code can control 6037execution by changing fields in kvm_run prior to calling the KVM_RUN 6038ioctl, and obtain information about the reason KVM_RUN returned by 6039looking up structure members. 6040 6041:: 6042 6043 struct kvm_run { 6044 /* in */ 6045 __u8 request_interrupt_window; 6046 6047Request that KVM_RUN return when it becomes possible to inject external 6048interrupts into the guest. Useful in conjunction with KVM_INTERRUPT. 6049 6050:: 6051 6052 __u8 immediate_exit; 6053 6054This field is polled once when KVM_RUN starts; if non-zero, KVM_RUN 6055exits immediately, returning -EINTR. In the common scenario where a 6056signal is used to "kick" a VCPU out of KVM_RUN, this field can be used 6057to avoid usage of KVM_SET_SIGNAL_MASK, which has worse scalability. 6058Rather than blocking the signal outside KVM_RUN, userspace can set up 6059a signal handler that sets run->immediate_exit to a non-zero value. 6060 6061This field is ignored if KVM_CAP_IMMEDIATE_EXIT is not available. 6062 6063:: 6064 6065 __u8 padding1[6]; 6066 6067 /* out */ 6068 __u32 exit_reason; 6069 6070When KVM_RUN has returned successfully (return value 0), this informs 6071application code why KVM_RUN has returned. Allowable values for this 6072field are detailed below. 6073 6074:: 6075 6076 __u8 ready_for_interrupt_injection; 6077 6078If request_interrupt_window has been specified, this field indicates 6079an interrupt can be injected now with KVM_INTERRUPT. 6080 6081:: 6082 6083 __u8 if_flag; 6084 6085The value of the current interrupt flag. Only valid if in-kernel 6086local APIC is not used. 6087 6088:: 6089 6090 __u16 flags; 6091 6092More architecture-specific flags detailing state of the VCPU that may 6093affect the device's behavior. Current defined flags:: 6094 6095 /* x86, set if the VCPU is in system management mode */ 6096 #define KVM_RUN_X86_SMM (1 << 0) 6097 /* x86, set if bus lock detected in VM */ 6098 #define KVM_RUN_BUS_LOCK (1 << 1) 6099 /* arm64, set for KVM_EXIT_DEBUG */ 6100 #define KVM_DEBUG_ARCH_HSR_HIGH_VALID (1 << 0) 6101 6102:: 6103 6104 /* in (pre_kvm_run), out (post_kvm_run) */ 6105 __u64 cr8; 6106 6107The value of the cr8 register. Only valid if in-kernel local APIC is 6108not used. Both input and output. 6109 6110:: 6111 6112 __u64 apic_base; 6113 6114The value of the APIC BASE msr. Only valid if in-kernel local 6115APIC is not used. Both input and output. 6116 6117:: 6118 6119 union { 6120 /* KVM_EXIT_UNKNOWN */ 6121 struct { 6122 __u64 hardware_exit_reason; 6123 } hw; 6124 6125If exit_reason is KVM_EXIT_UNKNOWN, the vcpu has exited due to unknown 6126reasons. Further architecture-specific information is available in 6127hardware_exit_reason. 6128 6129:: 6130 6131 /* KVM_EXIT_FAIL_ENTRY */ 6132 struct { 6133 __u64 hardware_entry_failure_reason; 6134 __u32 cpu; /* if KVM_LAST_CPU */ 6135 } fail_entry; 6136 6137If exit_reason is KVM_EXIT_FAIL_ENTRY, the vcpu could not be run due 6138to unknown reasons. Further architecture-specific information is 6139available in hardware_entry_failure_reason. 6140 6141:: 6142 6143 /* KVM_EXIT_EXCEPTION */ 6144 struct { 6145 __u32 exception; 6146 __u32 error_code; 6147 } ex; 6148 6149Unused. 6150 6151:: 6152 6153 /* KVM_EXIT_IO */ 6154 struct { 6155 #define KVM_EXIT_IO_IN 0 6156 #define KVM_EXIT_IO_OUT 1 6157 __u8 direction; 6158 __u8 size; /* bytes */ 6159 __u16 port; 6160 __u32 count; 6161 __u64 data_offset; /* relative to kvm_run start */ 6162 } io; 6163 6164If exit_reason is KVM_EXIT_IO, then the vcpu has 6165executed a port I/O instruction which could not be satisfied by kvm. 6166data_offset describes where the data is located (KVM_EXIT_IO_OUT) or 6167where kvm expects application code to place the data for the next 6168KVM_RUN invocation (KVM_EXIT_IO_IN). Data format is a packed array. 6169 6170:: 6171 6172 /* KVM_EXIT_DEBUG */ 6173 struct { 6174 struct kvm_debug_exit_arch arch; 6175 } debug; 6176 6177If the exit_reason is KVM_EXIT_DEBUG, then a vcpu is processing a debug event 6178for which architecture specific information is returned. 6179 6180:: 6181 6182 /* KVM_EXIT_MMIO */ 6183 struct { 6184 __u64 phys_addr; 6185 __u8 data[8]; 6186 __u32 len; 6187 __u8 is_write; 6188 } mmio; 6189 6190If exit_reason is KVM_EXIT_MMIO, then the vcpu has 6191executed a memory-mapped I/O instruction which could not be satisfied 6192by kvm. The 'data' member contains the written data if 'is_write' is 6193true, and should be filled by application code otherwise. 6194 6195The 'data' member contains, in its first 'len' bytes, the value as it would 6196appear if the VCPU performed a load or store of the appropriate width directly 6197to the byte array. 6198 6199.. note:: 6200 6201 For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR, KVM_EXIT_XEN, 6202 KVM_EXIT_EPR, KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR the corresponding 6203 operations are complete (and guest state is consistent) only after userspace 6204 has re-entered the kernel with KVM_RUN. The kernel side will first finish 6205 incomplete operations and then check for pending signals. 6206 6207 The pending state of the operation is not preserved in state which is 6208 visible to userspace, thus userspace should ensure that the operation is 6209 completed before performing a live migration. Userspace can re-enter the 6210 guest with an unmasked signal pending or with the immediate_exit field set 6211 to complete pending operations without allowing any further instructions 6212 to be executed. 6213 6214:: 6215 6216 /* KVM_EXIT_HYPERCALL */ 6217 struct { 6218 __u64 nr; 6219 __u64 args[6]; 6220 __u64 ret; 6221 __u32 longmode; 6222 __u32 pad; 6223 } hypercall; 6224 6225Unused. This was once used for 'hypercall to userspace'. To implement 6226such functionality, use KVM_EXIT_IO (x86) or KVM_EXIT_MMIO (all except s390). 6227 6228.. note:: KVM_EXIT_IO is significantly faster than KVM_EXIT_MMIO. 6229 6230:: 6231 6232 /* KVM_EXIT_TPR_ACCESS */ 6233 struct { 6234 __u64 rip; 6235 __u32 is_write; 6236 __u32 pad; 6237 } tpr_access; 6238 6239To be documented (KVM_TPR_ACCESS_REPORTING). 6240 6241:: 6242 6243 /* KVM_EXIT_S390_SIEIC */ 6244 struct { 6245 __u8 icptcode; 6246 __u64 mask; /* psw upper half */ 6247 __u64 addr; /* psw lower half */ 6248 __u16 ipa; 6249 __u32 ipb; 6250 } s390_sieic; 6251 6252s390 specific. 6253 6254:: 6255 6256 /* KVM_EXIT_S390_RESET */ 6257 #define KVM_S390_RESET_POR 1 6258 #define KVM_S390_RESET_CLEAR 2 6259 #define KVM_S390_RESET_SUBSYSTEM 4 6260 #define KVM_S390_RESET_CPU_INIT 8 6261 #define KVM_S390_RESET_IPL 16 6262 __u64 s390_reset_flags; 6263 6264s390 specific. 6265 6266:: 6267 6268 /* KVM_EXIT_S390_UCONTROL */ 6269 struct { 6270 __u64 trans_exc_code; 6271 __u32 pgm_code; 6272 } s390_ucontrol; 6273 6274s390 specific. A page fault has occurred for a user controlled virtual 6275machine (KVM_VM_S390_UNCONTROL) on it's host page table that cannot be 6276resolved by the kernel. 6277The program code and the translation exception code that were placed 6278in the cpu's lowcore are presented here as defined by the z Architecture 6279Principles of Operation Book in the Chapter for Dynamic Address Translation 6280(DAT) 6281 6282:: 6283 6284 /* KVM_EXIT_DCR */ 6285 struct { 6286 __u32 dcrn; 6287 __u32 data; 6288 __u8 is_write; 6289 } dcr; 6290 6291Deprecated - was used for 440 KVM. 6292 6293:: 6294 6295 /* KVM_EXIT_OSI */ 6296 struct { 6297 __u64 gprs[32]; 6298 } osi; 6299 6300MOL uses a special hypercall interface it calls 'OSI'. To enable it, we catch 6301hypercalls and exit with this exit struct that contains all the guest gprs. 6302 6303If exit_reason is KVM_EXIT_OSI, then the vcpu has triggered such a hypercall. 6304Userspace can now handle the hypercall and when it's done modify the gprs as 6305necessary. Upon guest entry all guest GPRs will then be replaced by the values 6306in this struct. 6307 6308:: 6309 6310 /* KVM_EXIT_PAPR_HCALL */ 6311 struct { 6312 __u64 nr; 6313 __u64 ret; 6314 __u64 args[9]; 6315 } papr_hcall; 6316 6317This is used on 64-bit PowerPC when emulating a pSeries partition, 6318e.g. with the 'pseries' machine type in qemu. It occurs when the 6319guest does a hypercall using the 'sc 1' instruction. The 'nr' field 6320contains the hypercall number (from the guest R3), and 'args' contains 6321the arguments (from the guest R4 - R12). Userspace should put the 6322return code in 'ret' and any extra returned values in args[]. 6323The possible hypercalls are defined in the Power Architecture Platform 6324Requirements (PAPR) document available from www.power.org (free 6325developer registration required to access it). 6326 6327:: 6328 6329 /* KVM_EXIT_S390_TSCH */ 6330 struct { 6331 __u16 subchannel_id; 6332 __u16 subchannel_nr; 6333 __u32 io_int_parm; 6334 __u32 io_int_word; 6335 __u32 ipb; 6336 __u8 dequeued; 6337 } s390_tsch; 6338 6339s390 specific. This exit occurs when KVM_CAP_S390_CSS_SUPPORT has been enabled 6340and TEST SUBCHANNEL was intercepted. If dequeued is set, a pending I/O 6341interrupt for the target subchannel has been dequeued and subchannel_id, 6342subchannel_nr, io_int_parm and io_int_word contain the parameters for that 6343interrupt. ipb is needed for instruction parameter decoding. 6344 6345:: 6346 6347 /* KVM_EXIT_EPR */ 6348 struct { 6349 __u32 epr; 6350 } epr; 6351 6352On FSL BookE PowerPC chips, the interrupt controller has a fast patch 6353interrupt acknowledge path to the core. When the core successfully 6354delivers an interrupt, it automatically populates the EPR register with 6355the interrupt vector number and acknowledges the interrupt inside 6356the interrupt controller. 6357 6358In case the interrupt controller lives in user space, we need to do 6359the interrupt acknowledge cycle through it to fetch the next to be 6360delivered interrupt vector using this exit. 6361 6362It gets triggered whenever both KVM_CAP_PPC_EPR are enabled and an 6363external interrupt has just been delivered into the guest. User space 6364should put the acknowledged interrupt vector into the 'epr' field. 6365 6366:: 6367 6368 /* KVM_EXIT_SYSTEM_EVENT */ 6369 struct { 6370 #define KVM_SYSTEM_EVENT_SHUTDOWN 1 6371 #define KVM_SYSTEM_EVENT_RESET 2 6372 #define KVM_SYSTEM_EVENT_CRASH 3 6373 #define KVM_SYSTEM_EVENT_WAKEUP 4 6374 #define KVM_SYSTEM_EVENT_SUSPEND 5 6375 #define KVM_SYSTEM_EVENT_SEV_TERM 6 6376 __u32 type; 6377 __u32 ndata; 6378 __u64 data[16]; 6379 } system_event; 6380 6381If exit_reason is KVM_EXIT_SYSTEM_EVENT then the vcpu has triggered 6382a system-level event using some architecture specific mechanism (hypercall 6383or some special instruction). In case of ARM64, this is triggered using 6384HVC instruction based PSCI call from the vcpu. 6385 6386The 'type' field describes the system-level event type. 6387Valid values for 'type' are: 6388 6389 - KVM_SYSTEM_EVENT_SHUTDOWN -- the guest has requested a shutdown of the 6390 VM. Userspace is not obliged to honour this, and if it does honour 6391 this does not need to destroy the VM synchronously (ie it may call 6392 KVM_RUN again before shutdown finally occurs). 6393 - KVM_SYSTEM_EVENT_RESET -- the guest has requested a reset of the VM. 6394 As with SHUTDOWN, userspace can choose to ignore the request, or 6395 to schedule the reset to occur in the future and may call KVM_RUN again. 6396 - KVM_SYSTEM_EVENT_CRASH -- the guest crash occurred and the guest 6397 has requested a crash condition maintenance. Userspace can choose 6398 to ignore the request, or to gather VM memory core dump and/or 6399 reset/shutdown of the VM. 6400 - KVM_SYSTEM_EVENT_SEV_TERM -- an AMD SEV guest requested termination. 6401 The guest physical address of the guest's GHCB is stored in `data[0]`. 6402 - KVM_SYSTEM_EVENT_WAKEUP -- the exiting vCPU is in a suspended state and 6403 KVM has recognized a wakeup event. Userspace may honor this event by 6404 marking the exiting vCPU as runnable, or deny it and call KVM_RUN again. 6405 - KVM_SYSTEM_EVENT_SUSPEND -- the guest has requested a suspension of 6406 the VM. 6407 6408If KVM_CAP_SYSTEM_EVENT_DATA is present, the 'data' field can contain 6409architecture specific information for the system-level event. Only 6410the first `ndata` items (possibly zero) of the data array are valid. 6411 6412 - for arm64, data[0] is set to KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2 if 6413 the guest issued a SYSTEM_RESET2 call according to v1.1 of the PSCI 6414 specification. 6415 6416 - for RISC-V, data[0] is set to the value of the second argument of the 6417 ``sbi_system_reset`` call. 6418 6419Previous versions of Linux defined a `flags` member in this struct. The 6420field is now aliased to `data[0]`. Userspace can assume that it is only 6421written if ndata is greater than 0. 6422 6423For arm/arm64: 6424-------------- 6425 6426KVM_SYSTEM_EVENT_SUSPEND exits are enabled with the 6427KVM_CAP_ARM_SYSTEM_SUSPEND VM capability. If a guest invokes the PSCI 6428SYSTEM_SUSPEND function, KVM will exit to userspace with this event 6429type. 6430 6431It is the sole responsibility of userspace to implement the PSCI 6432SYSTEM_SUSPEND call according to ARM DEN0022D.b 5.19 "SYSTEM_SUSPEND". 6433KVM does not change the vCPU's state before exiting to userspace, so 6434the call parameters are left in-place in the vCPU registers. 6435 6436Userspace is _required_ to take action for such an exit. It must 6437either: 6438 6439 - Honor the guest request to suspend the VM. Userspace can request 6440 in-kernel emulation of suspension by setting the calling vCPU's 6441 state to KVM_MP_STATE_SUSPENDED. Userspace must configure the vCPU's 6442 state according to the parameters passed to the PSCI function when 6443 the calling vCPU is resumed. See ARM DEN0022D.b 5.19.1 "Intended use" 6444 for details on the function parameters. 6445 6446 - Deny the guest request to suspend the VM. See ARM DEN0022D.b 5.19.2 6447 "Caller responsibilities" for possible return values. 6448 6449:: 6450 6451 /* KVM_EXIT_IOAPIC_EOI */ 6452 struct { 6453 __u8 vector; 6454 } eoi; 6455 6456Indicates that the VCPU's in-kernel local APIC received an EOI for a 6457level-triggered IOAPIC interrupt. This exit only triggers when the 6458IOAPIC is implemented in userspace (i.e. KVM_CAP_SPLIT_IRQCHIP is enabled); 6459the userspace IOAPIC should process the EOI and retrigger the interrupt if 6460it is still asserted. Vector is the LAPIC interrupt vector for which the 6461EOI was received. 6462 6463:: 6464 6465 struct kvm_hyperv_exit { 6466 #define KVM_EXIT_HYPERV_SYNIC 1 6467 #define KVM_EXIT_HYPERV_HCALL 2 6468 #define KVM_EXIT_HYPERV_SYNDBG 3 6469 __u32 type; 6470 __u32 pad1; 6471 union { 6472 struct { 6473 __u32 msr; 6474 __u32 pad2; 6475 __u64 control; 6476 __u64 evt_page; 6477 __u64 msg_page; 6478 } synic; 6479 struct { 6480 __u64 input; 6481 __u64 result; 6482 __u64 params[2]; 6483 } hcall; 6484 struct { 6485 __u32 msr; 6486 __u32 pad2; 6487 __u64 control; 6488 __u64 status; 6489 __u64 send_page; 6490 __u64 recv_page; 6491 __u64 pending_page; 6492 } syndbg; 6493 } u; 6494 }; 6495 /* KVM_EXIT_HYPERV */ 6496 struct kvm_hyperv_exit hyperv; 6497 6498Indicates that the VCPU exits into userspace to process some tasks 6499related to Hyper-V emulation. 6500 6501Valid values for 'type' are: 6502 6503 - KVM_EXIT_HYPERV_SYNIC -- synchronously notify user-space about 6504 6505Hyper-V SynIC state change. Notification is used to remap SynIC 6506event/message pages and to enable/disable SynIC messages/events processing 6507in userspace. 6508 6509 - KVM_EXIT_HYPERV_SYNDBG -- synchronously notify user-space about 6510 6511Hyper-V Synthetic debugger state change. Notification is used to either update 6512the pending_page location or to send a control command (send the buffer located 6513in send_page or recv a buffer to recv_page). 6514 6515:: 6516 6517 /* KVM_EXIT_ARM_NISV */ 6518 struct { 6519 __u64 esr_iss; 6520 __u64 fault_ipa; 6521 } arm_nisv; 6522 6523Used on arm64 systems. If a guest accesses memory not in a memslot, 6524KVM will typically return to userspace and ask it to do MMIO emulation on its 6525behalf. However, for certain classes of instructions, no instruction decode 6526(direction, length of memory access) is provided, and fetching and decoding 6527the instruction from the VM is overly complicated to live in the kernel. 6528 6529Historically, when this situation occurred, KVM would print a warning and kill 6530the VM. KVM assumed that if the guest accessed non-memslot memory, it was 6531trying to do I/O, which just couldn't be emulated, and the warning message was 6532phrased accordingly. However, what happened more often was that a guest bug 6533caused access outside the guest memory areas which should lead to a more 6534meaningful warning message and an external abort in the guest, if the access 6535did not fall within an I/O window. 6536 6537Userspace implementations can query for KVM_CAP_ARM_NISV_TO_USER, and enable 6538this capability at VM creation. Once this is done, these types of errors will 6539instead return to userspace with KVM_EXIT_ARM_NISV, with the valid bits from 6540the ESR_EL2 in the esr_iss field, and the faulting IPA in the fault_ipa field. 6541Userspace can either fix up the access if it's actually an I/O access by 6542decoding the instruction from guest memory (if it's very brave) and continue 6543executing the guest, or it can decide to suspend, dump, or restart the guest. 6544 6545Note that KVM does not skip the faulting instruction as it does for 6546KVM_EXIT_MMIO, but userspace has to emulate any change to the processing state 6547if it decides to decode and emulate the instruction. 6548 6549:: 6550 6551 /* KVM_EXIT_X86_RDMSR / KVM_EXIT_X86_WRMSR */ 6552 struct { 6553 __u8 error; /* user -> kernel */ 6554 __u8 pad[7]; 6555 __u32 reason; /* kernel -> user */ 6556 __u32 index; /* kernel -> user */ 6557 __u64 data; /* kernel <-> user */ 6558 } msr; 6559 6560Used on x86 systems. When the VM capability KVM_CAP_X86_USER_SPACE_MSR is 6561enabled, MSR accesses to registers that would invoke a #GP by KVM kernel code 6562may instead trigger a KVM_EXIT_X86_RDMSR exit for reads and KVM_EXIT_X86_WRMSR 6563exit for writes. 6564 6565The "reason" field specifies why the MSR interception occurred. Userspace will 6566only receive MSR exits when a particular reason was requested during through 6567ENABLE_CAP. Currently valid exit reasons are: 6568 6569============================ ======================================== 6570 KVM_MSR_EXIT_REASON_UNKNOWN access to MSR that is unknown to KVM 6571 KVM_MSR_EXIT_REASON_INVAL access to invalid MSRs or reserved bits 6572 KVM_MSR_EXIT_REASON_FILTER access blocked by KVM_X86_SET_MSR_FILTER 6573============================ ======================================== 6574 6575For KVM_EXIT_X86_RDMSR, the "index" field tells userspace which MSR the guest 6576wants to read. To respond to this request with a successful read, userspace 6577writes the respective data into the "data" field and must continue guest 6578execution to ensure the read data is transferred into guest register state. 6579 6580If the RDMSR request was unsuccessful, userspace indicates that with a "1" in 6581the "error" field. This will inject a #GP into the guest when the VCPU is 6582executed again. 6583 6584For KVM_EXIT_X86_WRMSR, the "index" field tells userspace which MSR the guest 6585wants to write. Once finished processing the event, userspace must continue 6586vCPU execution. If the MSR write was unsuccessful, userspace also sets the 6587"error" field to "1". 6588 6589See KVM_X86_SET_MSR_FILTER for details on the interaction with MSR filtering. 6590 6591:: 6592 6593 6594 struct kvm_xen_exit { 6595 #define KVM_EXIT_XEN_HCALL 1 6596 __u32 type; 6597 union { 6598 struct { 6599 __u32 longmode; 6600 __u32 cpl; 6601 __u64 input; 6602 __u64 result; 6603 __u64 params[6]; 6604 } hcall; 6605 } u; 6606 }; 6607 /* KVM_EXIT_XEN */ 6608 struct kvm_hyperv_exit xen; 6609 6610Indicates that the VCPU exits into userspace to process some tasks 6611related to Xen emulation. 6612 6613Valid values for 'type' are: 6614 6615 - KVM_EXIT_XEN_HCALL -- synchronously notify user-space about Xen hypercall. 6616 Userspace is expected to place the hypercall result into the appropriate 6617 field before invoking KVM_RUN again. 6618 6619:: 6620 6621 /* KVM_EXIT_RISCV_SBI */ 6622 struct { 6623 unsigned long extension_id; 6624 unsigned long function_id; 6625 unsigned long args[6]; 6626 unsigned long ret[2]; 6627 } riscv_sbi; 6628 6629If exit reason is KVM_EXIT_RISCV_SBI then it indicates that the VCPU has 6630done a SBI call which is not handled by KVM RISC-V kernel module. The details 6631of the SBI call are available in 'riscv_sbi' member of kvm_run structure. The 6632'extension_id' field of 'riscv_sbi' represents SBI extension ID whereas the 6633'function_id' field represents function ID of given SBI extension. The 'args' 6634array field of 'riscv_sbi' represents parameters for the SBI call and 'ret' 6635array field represents return values. The userspace should update the return 6636values of SBI call before resuming the VCPU. For more details on RISC-V SBI 6637spec refer, https://github.com/riscv/riscv-sbi-doc. 6638 6639:: 6640 6641 /* KVM_EXIT_NOTIFY */ 6642 struct { 6643 #define KVM_NOTIFY_CONTEXT_INVALID (1 << 0) 6644 __u32 flags; 6645 } notify; 6646 6647Used on x86 systems. When the VM capability KVM_CAP_X86_NOTIFY_VMEXIT is 6648enabled, a VM exit generated if no event window occurs in VM non-root mode 6649for a specified amount of time. Once KVM_X86_NOTIFY_VMEXIT_USER is set when 6650enabling the cap, it would exit to userspace with the exit reason 6651KVM_EXIT_NOTIFY for further handling. The "flags" field contains more 6652detailed info. 6653 6654The valid value for 'flags' is: 6655 6656 - KVM_NOTIFY_CONTEXT_INVALID -- the VM context is corrupted and not valid 6657 in VMCS. It would run into unknown result if resume the target VM. 6658 6659:: 6660 6661 /* Fix the size of the union. */ 6662 char padding[256]; 6663 }; 6664 6665 /* 6666 * shared registers between kvm and userspace. 6667 * kvm_valid_regs specifies the register classes set by the host 6668 * kvm_dirty_regs specified the register classes dirtied by userspace 6669 * struct kvm_sync_regs is architecture specific, as well as the 6670 * bits for kvm_valid_regs and kvm_dirty_regs 6671 */ 6672 __u64 kvm_valid_regs; 6673 __u64 kvm_dirty_regs; 6674 union { 6675 struct kvm_sync_regs regs; 6676 char padding[SYNC_REGS_SIZE_BYTES]; 6677 } s; 6678 6679If KVM_CAP_SYNC_REGS is defined, these fields allow userspace to access 6680certain guest registers without having to call SET/GET_*REGS. Thus we can 6681avoid some system call overhead if userspace has to handle the exit. 6682Userspace can query the validity of the structure by checking 6683kvm_valid_regs for specific bits. These bits are architecture specific 6684and usually define the validity of a groups of registers. (e.g. one bit 6685for general purpose registers) 6686 6687Please note that the kernel is allowed to use the kvm_run structure as the 6688primary storage for certain register types. Therefore, the kernel may use the 6689values in kvm_run even if the corresponding bit in kvm_dirty_regs is not set. 6690 6691 66926. Capabilities that can be enabled on vCPUs 6693============================================ 6694 6695There are certain capabilities that change the behavior of the virtual CPU or 6696the virtual machine when enabled. To enable them, please see section 4.37. 6697Below you can find a list of capabilities and what their effect on the vCPU or 6698the virtual machine is when enabling them. 6699 6700The following information is provided along with the description: 6701 6702 Architectures: 6703 which instruction set architectures provide this ioctl. 6704 x86 includes both i386 and x86_64. 6705 6706 Target: 6707 whether this is a per-vcpu or per-vm capability. 6708 6709 Parameters: 6710 what parameters are accepted by the capability. 6711 6712 Returns: 6713 the return value. General error numbers (EBADF, ENOMEM, EINVAL) 6714 are not detailed, but errors with specific meanings are. 6715 6716 67176.1 KVM_CAP_PPC_OSI 6718------------------- 6719 6720:Architectures: ppc 6721:Target: vcpu 6722:Parameters: none 6723:Returns: 0 on success; -1 on error 6724 6725This capability enables interception of OSI hypercalls that otherwise would 6726be treated as normal system calls to be injected into the guest. OSI hypercalls 6727were invented by Mac-on-Linux to have a standardized communication mechanism 6728between the guest and the host. 6729 6730When this capability is enabled, KVM_EXIT_OSI can occur. 6731 6732 67336.2 KVM_CAP_PPC_PAPR 6734-------------------- 6735 6736:Architectures: ppc 6737:Target: vcpu 6738:Parameters: none 6739:Returns: 0 on success; -1 on error 6740 6741This capability enables interception of PAPR hypercalls. PAPR hypercalls are 6742done using the hypercall instruction "sc 1". 6743 6744It also sets the guest privilege level to "supervisor" mode. Usually the guest 6745runs in "hypervisor" privilege mode with a few missing features. 6746 6747In addition to the above, it changes the semantics of SDR1. In this mode, the 6748HTAB address part of SDR1 contains an HVA instead of a GPA, as PAPR keeps the 6749HTAB invisible to the guest. 6750 6751When this capability is enabled, KVM_EXIT_PAPR_HCALL can occur. 6752 6753 67546.3 KVM_CAP_SW_TLB 6755------------------ 6756 6757:Architectures: ppc 6758:Target: vcpu 6759:Parameters: args[0] is the address of a struct kvm_config_tlb 6760:Returns: 0 on success; -1 on error 6761 6762:: 6763 6764 struct kvm_config_tlb { 6765 __u64 params; 6766 __u64 array; 6767 __u32 mmu_type; 6768 __u32 array_len; 6769 }; 6770 6771Configures the virtual CPU's TLB array, establishing a shared memory area 6772between userspace and KVM. The "params" and "array" fields are userspace 6773addresses of mmu-type-specific data structures. The "array_len" field is an 6774safety mechanism, and should be set to the size in bytes of the memory that 6775userspace has reserved for the array. It must be at least the size dictated 6776by "mmu_type" and "params". 6777 6778While KVM_RUN is active, the shared region is under control of KVM. Its 6779contents are undefined, and any modification by userspace results in 6780boundedly undefined behavior. 6781 6782On return from KVM_RUN, the shared region will reflect the current state of 6783the guest's TLB. If userspace makes any changes, it must call KVM_DIRTY_TLB 6784to tell KVM which entries have been changed, prior to calling KVM_RUN again 6785on this vcpu. 6786 6787For mmu types KVM_MMU_FSL_BOOKE_NOHV and KVM_MMU_FSL_BOOKE_HV: 6788 6789 - The "params" field is of type "struct kvm_book3e_206_tlb_params". 6790 - The "array" field points to an array of type "struct 6791 kvm_book3e_206_tlb_entry". 6792 - The array consists of all entries in the first TLB, followed by all 6793 entries in the second TLB. 6794 - Within a TLB, entries are ordered first by increasing set number. Within a 6795 set, entries are ordered by way (increasing ESEL). 6796 - The hash for determining set number in TLB0 is: (MAS2 >> 12) & (num_sets - 1) 6797 where "num_sets" is the tlb_sizes[] value divided by the tlb_ways[] value. 6798 - The tsize field of mas1 shall be set to 4K on TLB0, even though the 6799 hardware ignores this value for TLB0. 6800 68016.4 KVM_CAP_S390_CSS_SUPPORT 6802---------------------------- 6803 6804:Architectures: s390 6805:Target: vcpu 6806:Parameters: none 6807:Returns: 0 on success; -1 on error 6808 6809This capability enables support for handling of channel I/O instructions. 6810 6811TEST PENDING INTERRUPTION and the interrupt portion of TEST SUBCHANNEL are 6812handled in-kernel, while the other I/O instructions are passed to userspace. 6813 6814When this capability is enabled, KVM_EXIT_S390_TSCH will occur on TEST 6815SUBCHANNEL intercepts. 6816 6817Note that even though this capability is enabled per-vcpu, the complete 6818virtual machine is affected. 6819 68206.5 KVM_CAP_PPC_EPR 6821------------------- 6822 6823:Architectures: ppc 6824:Target: vcpu 6825:Parameters: args[0] defines whether the proxy facility is active 6826:Returns: 0 on success; -1 on error 6827 6828This capability enables or disables the delivery of interrupts through the 6829external proxy facility. 6830 6831When enabled (args[0] != 0), every time the guest gets an external interrupt 6832delivered, it automatically exits into user space with a KVM_EXIT_EPR exit 6833to receive the topmost interrupt vector. 6834 6835When disabled (args[0] == 0), behavior is as if this facility is unsupported. 6836 6837When this capability is enabled, KVM_EXIT_EPR can occur. 6838 68396.6 KVM_CAP_IRQ_MPIC 6840-------------------- 6841 6842:Architectures: ppc 6843:Parameters: args[0] is the MPIC device fd; 6844 args[1] is the MPIC CPU number for this vcpu 6845 6846This capability connects the vcpu to an in-kernel MPIC device. 6847 68486.7 KVM_CAP_IRQ_XICS 6849-------------------- 6850 6851:Architectures: ppc 6852:Target: vcpu 6853:Parameters: args[0] is the XICS device fd; 6854 args[1] is the XICS CPU number (server ID) for this vcpu 6855 6856This capability connects the vcpu to an in-kernel XICS device. 6857 68586.8 KVM_CAP_S390_IRQCHIP 6859------------------------ 6860 6861:Architectures: s390 6862:Target: vm 6863:Parameters: none 6864 6865This capability enables the in-kernel irqchip for s390. Please refer to 6866"4.24 KVM_CREATE_IRQCHIP" for details. 6867 68686.9 KVM_CAP_MIPS_FPU 6869-------------------- 6870 6871:Architectures: mips 6872:Target: vcpu 6873:Parameters: args[0] is reserved for future use (should be 0). 6874 6875This capability allows the use of the host Floating Point Unit by the guest. It 6876allows the Config1.FP bit to be set to enable the FPU in the guest. Once this is 6877done the ``KVM_REG_MIPS_FPR_*`` and ``KVM_REG_MIPS_FCR_*`` registers can be 6878accessed (depending on the current guest FPU register mode), and the Status.FR, 6879Config5.FRE bits are accessible via the KVM API and also from the guest, 6880depending on them being supported by the FPU. 6881 68826.10 KVM_CAP_MIPS_MSA 6883--------------------- 6884 6885:Architectures: mips 6886:Target: vcpu 6887:Parameters: args[0] is reserved for future use (should be 0). 6888 6889This capability allows the use of the MIPS SIMD Architecture (MSA) by the guest. 6890It allows the Config3.MSAP bit to be set to enable the use of MSA by the guest. 6891Once this is done the ``KVM_REG_MIPS_VEC_*`` and ``KVM_REG_MIPS_MSA_*`` 6892registers can be accessed, and the Config5.MSAEn bit is accessible via the 6893KVM API and also from the guest. 6894 68956.74 KVM_CAP_SYNC_REGS 6896---------------------- 6897 6898:Architectures: s390, x86 6899:Target: s390: always enabled, x86: vcpu 6900:Parameters: none 6901:Returns: x86: KVM_CHECK_EXTENSION returns a bit-array indicating which register 6902 sets are supported 6903 (bitfields defined in arch/x86/include/uapi/asm/kvm.h). 6904 6905As described above in the kvm_sync_regs struct info in section 5 (kvm_run): 6906KVM_CAP_SYNC_REGS "allow[s] userspace to access certain guest registers 6907without having to call SET/GET_*REGS". This reduces overhead by eliminating 6908repeated ioctl calls for setting and/or getting register values. This is 6909particularly important when userspace is making synchronous guest state 6910modifications, e.g. when emulating and/or intercepting instructions in 6911userspace. 6912 6913For s390 specifics, please refer to the source code. 6914 6915For x86: 6916 6917- the register sets to be copied out to kvm_run are selectable 6918 by userspace (rather that all sets being copied out for every exit). 6919- vcpu_events are available in addition to regs and sregs. 6920 6921For x86, the 'kvm_valid_regs' field of struct kvm_run is overloaded to 6922function as an input bit-array field set by userspace to indicate the 6923specific register sets to be copied out on the next exit. 6924 6925To indicate when userspace has modified values that should be copied into 6926the vCPU, the all architecture bitarray field, 'kvm_dirty_regs' must be set. 6927This is done using the same bitflags as for the 'kvm_valid_regs' field. 6928If the dirty bit is not set, then the register set values will not be copied 6929into the vCPU even if they've been modified. 6930 6931Unused bitfields in the bitarrays must be set to zero. 6932 6933:: 6934 6935 struct kvm_sync_regs { 6936 struct kvm_regs regs; 6937 struct kvm_sregs sregs; 6938 struct kvm_vcpu_events events; 6939 }; 6940 69416.75 KVM_CAP_PPC_IRQ_XIVE 6942------------------------- 6943 6944:Architectures: ppc 6945:Target: vcpu 6946:Parameters: args[0] is the XIVE device fd; 6947 args[1] is the XIVE CPU number (server ID) for this vcpu 6948 6949This capability connects the vcpu to an in-kernel XIVE device. 6950 69517. Capabilities that can be enabled on VMs 6952========================================== 6953 6954There are certain capabilities that change the behavior of the virtual 6955machine when enabled. To enable them, please see section 4.37. Below 6956you can find a list of capabilities and what their effect on the VM 6957is when enabling them. 6958 6959The following information is provided along with the description: 6960 6961 Architectures: 6962 which instruction set architectures provide this ioctl. 6963 x86 includes both i386 and x86_64. 6964 6965 Parameters: 6966 what parameters are accepted by the capability. 6967 6968 Returns: 6969 the return value. General error numbers (EBADF, ENOMEM, EINVAL) 6970 are not detailed, but errors with specific meanings are. 6971 6972 69737.1 KVM_CAP_PPC_ENABLE_HCALL 6974---------------------------- 6975 6976:Architectures: ppc 6977:Parameters: args[0] is the sPAPR hcall number; 6978 args[1] is 0 to disable, 1 to enable in-kernel handling 6979 6980This capability controls whether individual sPAPR hypercalls (hcalls) 6981get handled by the kernel or not. Enabling or disabling in-kernel 6982handling of an hcall is effective across the VM. On creation, an 6983initial set of hcalls are enabled for in-kernel handling, which 6984consists of those hcalls for which in-kernel handlers were implemented 6985before this capability was implemented. If disabled, the kernel will 6986not to attempt to handle the hcall, but will always exit to userspace 6987to handle it. Note that it may not make sense to enable some and 6988disable others of a group of related hcalls, but KVM does not prevent 6989userspace from doing that. 6990 6991If the hcall number specified is not one that has an in-kernel 6992implementation, the KVM_ENABLE_CAP ioctl will fail with an EINVAL 6993error. 6994 69957.2 KVM_CAP_S390_USER_SIGP 6996-------------------------- 6997 6998:Architectures: s390 6999:Parameters: none 7000 7001This capability controls which SIGP orders will be handled completely in user 7002space. With this capability enabled, all fast orders will be handled completely 7003in the kernel: 7004 7005- SENSE 7006- SENSE RUNNING 7007- EXTERNAL CALL 7008- EMERGENCY SIGNAL 7009- CONDITIONAL EMERGENCY SIGNAL 7010 7011All other orders will be handled completely in user space. 7012 7013Only privileged operation exceptions will be checked for in the kernel (or even 7014in the hardware prior to interception). If this capability is not enabled, the 7015old way of handling SIGP orders is used (partially in kernel and user space). 7016 70177.3 KVM_CAP_S390_VECTOR_REGISTERS 7018--------------------------------- 7019 7020:Architectures: s390 7021:Parameters: none 7022:Returns: 0 on success, negative value on error 7023 7024Allows use of the vector registers introduced with z13 processor, and 7025provides for the synchronization between host and user space. Will 7026return -EINVAL if the machine does not support vectors. 7027 70287.4 KVM_CAP_S390_USER_STSI 7029-------------------------- 7030 7031:Architectures: s390 7032:Parameters: none 7033 7034This capability allows post-handlers for the STSI instruction. After 7035initial handling in the kernel, KVM exits to user space with 7036KVM_EXIT_S390_STSI to allow user space to insert further data. 7037 7038Before exiting to userspace, kvm handlers should fill in s390_stsi field of 7039vcpu->run:: 7040 7041 struct { 7042 __u64 addr; 7043 __u8 ar; 7044 __u8 reserved; 7045 __u8 fc; 7046 __u8 sel1; 7047 __u16 sel2; 7048 } s390_stsi; 7049 7050 @addr - guest address of STSI SYSIB 7051 @fc - function code 7052 @sel1 - selector 1 7053 @sel2 - selector 2 7054 @ar - access register number 7055 7056KVM handlers should exit to userspace with rc = -EREMOTE. 7057 70587.5 KVM_CAP_SPLIT_IRQCHIP 7059------------------------- 7060 7061:Architectures: x86 7062:Parameters: args[0] - number of routes reserved for userspace IOAPICs 7063:Returns: 0 on success, -1 on error 7064 7065Create a local apic for each processor in the kernel. This can be used 7066instead of KVM_CREATE_IRQCHIP if the userspace VMM wishes to emulate the 7067IOAPIC and PIC (and also the PIT, even though this has to be enabled 7068separately). 7069 7070This capability also enables in kernel routing of interrupt requests; 7071when KVM_CAP_SPLIT_IRQCHIP only routes of KVM_IRQ_ROUTING_MSI type are 7072used in the IRQ routing table. The first args[0] MSI routes are reserved 7073for the IOAPIC pins. Whenever the LAPIC receives an EOI for these routes, 7074a KVM_EXIT_IOAPIC_EOI vmexit will be reported to userspace. 7075 7076Fails if VCPU has already been created, or if the irqchip is already in the 7077kernel (i.e. KVM_CREATE_IRQCHIP has already been called). 7078 70797.6 KVM_CAP_S390_RI 7080------------------- 7081 7082:Architectures: s390 7083:Parameters: none 7084 7085Allows use of runtime-instrumentation introduced with zEC12 processor. 7086Will return -EINVAL if the machine does not support runtime-instrumentation. 7087Will return -EBUSY if a VCPU has already been created. 7088 70897.7 KVM_CAP_X2APIC_API 7090---------------------- 7091 7092:Architectures: x86 7093:Parameters: args[0] - features that should be enabled 7094:Returns: 0 on success, -EINVAL when args[0] contains invalid features 7095 7096Valid feature flags in args[0] are:: 7097 7098 #define KVM_X2APIC_API_USE_32BIT_IDS (1ULL << 0) 7099 #define KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK (1ULL << 1) 7100 7101Enabling KVM_X2APIC_API_USE_32BIT_IDS changes the behavior of 7102KVM_SET_GSI_ROUTING, KVM_SIGNAL_MSI, KVM_SET_LAPIC, and KVM_GET_LAPIC, 7103allowing the use of 32-bit APIC IDs. See KVM_CAP_X2APIC_API in their 7104respective sections. 7105 7106KVM_X2APIC_API_DISABLE_BROADCAST_QUIRK must be enabled for x2APIC to work 7107in logical mode or with more than 255 VCPUs. Otherwise, KVM treats 0xff 7108as a broadcast even in x2APIC mode in order to support physical x2APIC 7109without interrupt remapping. This is undesirable in logical mode, 7110where 0xff represents CPUs 0-7 in cluster 0. 7111 71127.8 KVM_CAP_S390_USER_INSTR0 7113---------------------------- 7114 7115:Architectures: s390 7116:Parameters: none 7117 7118With this capability enabled, all illegal instructions 0x0000 (2 bytes) will 7119be intercepted and forwarded to user space. User space can use this 7120mechanism e.g. to realize 2-byte software breakpoints. The kernel will 7121not inject an operating exception for these instructions, user space has 7122to take care of that. 7123 7124This capability can be enabled dynamically even if VCPUs were already 7125created and are running. 7126 71277.9 KVM_CAP_S390_GS 7128------------------- 7129 7130:Architectures: s390 7131:Parameters: none 7132:Returns: 0 on success; -EINVAL if the machine does not support 7133 guarded storage; -EBUSY if a VCPU has already been created. 7134 7135Allows use of guarded storage for the KVM guest. 7136 71377.10 KVM_CAP_S390_AIS 7138--------------------- 7139 7140:Architectures: s390 7141:Parameters: none 7142 7143Allow use of adapter-interruption suppression. 7144:Returns: 0 on success; -EBUSY if a VCPU has already been created. 7145 71467.11 KVM_CAP_PPC_SMT 7147-------------------- 7148 7149:Architectures: ppc 7150:Parameters: vsmt_mode, flags 7151 7152Enabling this capability on a VM provides userspace with a way to set 7153the desired virtual SMT mode (i.e. the number of virtual CPUs per 7154virtual core). The virtual SMT mode, vsmt_mode, must be a power of 2 7155between 1 and 8. On POWER8, vsmt_mode must also be no greater than 7156the number of threads per subcore for the host. Currently flags must 7157be 0. A successful call to enable this capability will result in 7158vsmt_mode being returned when the KVM_CAP_PPC_SMT capability is 7159subsequently queried for the VM. This capability is only supported by 7160HV KVM, and can only be set before any VCPUs have been created. 7161The KVM_CAP_PPC_SMT_POSSIBLE capability indicates which virtual SMT 7162modes are available. 7163 71647.12 KVM_CAP_PPC_FWNMI 7165---------------------- 7166 7167:Architectures: ppc 7168:Parameters: none 7169 7170With this capability a machine check exception in the guest address 7171space will cause KVM to exit the guest with NMI exit reason. This 7172enables QEMU to build error log and branch to guest kernel registered 7173machine check handling routine. Without this capability KVM will 7174branch to guests' 0x200 interrupt vector. 7175 71767.13 KVM_CAP_X86_DISABLE_EXITS 7177------------------------------ 7178 7179:Architectures: x86 7180:Parameters: args[0] defines which exits are disabled 7181:Returns: 0 on success, -EINVAL when args[0] contains invalid exits 7182 7183Valid bits in args[0] are:: 7184 7185 #define KVM_X86_DISABLE_EXITS_MWAIT (1 << 0) 7186 #define KVM_X86_DISABLE_EXITS_HLT (1 << 1) 7187 #define KVM_X86_DISABLE_EXITS_PAUSE (1 << 2) 7188 #define KVM_X86_DISABLE_EXITS_CSTATE (1 << 3) 7189 7190Enabling this capability on a VM provides userspace with a way to no 7191longer intercept some instructions for improved latency in some 7192workloads, and is suggested when vCPUs are associated to dedicated 7193physical CPUs. More bits can be added in the future; userspace can 7194just pass the KVM_CHECK_EXTENSION result to KVM_ENABLE_CAP to disable 7195all such vmexits. 7196 7197Do not enable KVM_FEATURE_PV_UNHALT if you disable HLT exits. 7198 71997.14 KVM_CAP_S390_HPAGE_1M 7200-------------------------- 7201 7202:Architectures: s390 7203:Parameters: none 7204:Returns: 0 on success, -EINVAL if hpage module parameter was not set 7205 or cmma is enabled, or the VM has the KVM_VM_S390_UCONTROL 7206 flag set 7207 7208With this capability the KVM support for memory backing with 1m pages 7209through hugetlbfs can be enabled for a VM. After the capability is 7210enabled, cmma can't be enabled anymore and pfmfi and the storage key 7211interpretation are disabled. If cmma has already been enabled or the 7212hpage module parameter is not set to 1, -EINVAL is returned. 7213 7214While it is generally possible to create a huge page backed VM without 7215this capability, the VM will not be able to run. 7216 72177.15 KVM_CAP_MSR_PLATFORM_INFO 7218------------------------------ 7219 7220:Architectures: x86 7221:Parameters: args[0] whether feature should be enabled or not 7222 7223With this capability, a guest may read the MSR_PLATFORM_INFO MSR. Otherwise, 7224a #GP would be raised when the guest tries to access. Currently, this 7225capability does not enable write permissions of this MSR for the guest. 7226 72277.16 KVM_CAP_PPC_NESTED_HV 7228-------------------------- 7229 7230:Architectures: ppc 7231:Parameters: none 7232:Returns: 0 on success, -EINVAL when the implementation doesn't support 7233 nested-HV virtualization. 7234 7235HV-KVM on POWER9 and later systems allows for "nested-HV" 7236virtualization, which provides a way for a guest VM to run guests that 7237can run using the CPU's supervisor mode (privileged non-hypervisor 7238state). Enabling this capability on a VM depends on the CPU having 7239the necessary functionality and on the facility being enabled with a 7240kvm-hv module parameter. 7241 72427.17 KVM_CAP_EXCEPTION_PAYLOAD 7243------------------------------ 7244 7245:Architectures: x86 7246:Parameters: args[0] whether feature should be enabled or not 7247 7248With this capability enabled, CR2 will not be modified prior to the 7249emulated VM-exit when L1 intercepts a #PF exception that occurs in 7250L2. Similarly, for kvm-intel only, DR6 will not be modified prior to 7251the emulated VM-exit when L1 intercepts a #DB exception that occurs in 7252L2. As a result, when KVM_GET_VCPU_EVENTS reports a pending #PF (or 7253#DB) exception for L2, exception.has_payload will be set and the 7254faulting address (or the new DR6 bits*) will be reported in the 7255exception_payload field. Similarly, when userspace injects a #PF (or 7256#DB) into L2 using KVM_SET_VCPU_EVENTS, it is expected to set 7257exception.has_payload and to put the faulting address - or the new DR6 7258bits\ [#]_ - in the exception_payload field. 7259 7260This capability also enables exception.pending in struct 7261kvm_vcpu_events, which allows userspace to distinguish between pending 7262and injected exceptions. 7263 7264 7265.. [#] For the new DR6 bits, note that bit 16 is set iff the #DB exception 7266 will clear DR6.RTM. 7267 72687.18 KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 7269 7270:Architectures: x86, arm64, mips 7271:Parameters: args[0] whether feature should be enabled or not 7272 7273Valid flags are:: 7274 7275 #define KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE (1 << 0) 7276 #define KVM_DIRTY_LOG_INITIALLY_SET (1 << 1) 7277 7278With KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE is set, KVM_GET_DIRTY_LOG will not 7279automatically clear and write-protect all pages that are returned as dirty. 7280Rather, userspace will have to do this operation separately using 7281KVM_CLEAR_DIRTY_LOG. 7282 7283At the cost of a slightly more complicated operation, this provides better 7284scalability and responsiveness for two reasons. First, 7285KVM_CLEAR_DIRTY_LOG ioctl can operate on a 64-page granularity rather 7286than requiring to sync a full memslot; this ensures that KVM does not 7287take spinlocks for an extended period of time. Second, in some cases a 7288large amount of time can pass between a call to KVM_GET_DIRTY_LOG and 7289userspace actually using the data in the page. Pages can be modified 7290during this time, which is inefficient for both the guest and userspace: 7291the guest will incur a higher penalty due to write protection faults, 7292while userspace can see false reports of dirty pages. Manual reprotection 7293helps reducing this time, improving guest performance and reducing the 7294number of dirty log false positives. 7295 7296With KVM_DIRTY_LOG_INITIALLY_SET set, all the bits of the dirty bitmap 7297will be initialized to 1 when created. This also improves performance because 7298dirty logging can be enabled gradually in small chunks on the first call 7299to KVM_CLEAR_DIRTY_LOG. KVM_DIRTY_LOG_INITIALLY_SET depends on 7300KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE (it is also only available on 7301x86 and arm64 for now). 7302 7303KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 was previously available under the name 7304KVM_CAP_MANUAL_DIRTY_LOG_PROTECT, but the implementation had bugs that make 7305it hard or impossible to use it correctly. The availability of 7306KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 signals that those bugs are fixed. 7307Userspace should not try to use KVM_CAP_MANUAL_DIRTY_LOG_PROTECT. 7308 73097.19 KVM_CAP_PPC_SECURE_GUEST 7310------------------------------ 7311 7312:Architectures: ppc 7313 7314This capability indicates that KVM is running on a host that has 7315ultravisor firmware and thus can support a secure guest. On such a 7316system, a guest can ask the ultravisor to make it a secure guest, 7317one whose memory is inaccessible to the host except for pages which 7318are explicitly requested to be shared with the host. The ultravisor 7319notifies KVM when a guest requests to become a secure guest, and KVM 7320has the opportunity to veto the transition. 7321 7322If present, this capability can be enabled for a VM, meaning that KVM 7323will allow the transition to secure guest mode. Otherwise KVM will 7324veto the transition. 7325 73267.20 KVM_CAP_HALT_POLL 7327---------------------- 7328 7329:Architectures: all 7330:Target: VM 7331:Parameters: args[0] is the maximum poll time in nanoseconds 7332:Returns: 0 on success; -1 on error 7333 7334KVM_CAP_HALT_POLL overrides the kvm.halt_poll_ns module parameter to set the 7335maximum halt-polling time for all vCPUs in the target VM. This capability can 7336be invoked at any time and any number of times to dynamically change the 7337maximum halt-polling time. 7338 7339See Documentation/virt/kvm/halt-polling.rst for more information on halt 7340polling. 7341 73427.21 KVM_CAP_X86_USER_SPACE_MSR 7343------------------------------- 7344 7345:Architectures: x86 7346:Target: VM 7347:Parameters: args[0] contains the mask of KVM_MSR_EXIT_REASON_* events to report 7348:Returns: 0 on success; -1 on error 7349 7350This capability allows userspace to intercept RDMSR and WRMSR instructions if 7351access to an MSR is denied. By default, KVM injects #GP on denied accesses. 7352 7353When a guest requests to read or write an MSR, KVM may not implement all MSRs 7354that are relevant to a respective system. It also does not differentiate by 7355CPU type. 7356 7357To allow more fine grained control over MSR handling, userspace may enable 7358this capability. With it enabled, MSR accesses that match the mask specified in 7359args[0] and would trigger a #GP inside the guest will instead trigger 7360KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR exit notifications. Userspace 7361can then implement model specific MSR handling and/or user notifications 7362to inform a user that an MSR was not emulated/virtualized by KVM. 7363 7364The valid mask flags are: 7365 7366============================ =============================================== 7367 KVM_MSR_EXIT_REASON_UNKNOWN intercept accesses to unknown (to KVM) MSRs 7368 KVM_MSR_EXIT_REASON_INVAL intercept accesses that are architecturally 7369 invalid according to the vCPU model and/or mode 7370 KVM_MSR_EXIT_REASON_FILTER intercept accesses that are denied by userspace 7371 via KVM_X86_SET_MSR_FILTER 7372============================ =============================================== 7373 73747.22 KVM_CAP_X86_BUS_LOCK_EXIT 7375------------------------------- 7376 7377:Architectures: x86 7378:Target: VM 7379:Parameters: args[0] defines the policy used when bus locks detected in guest 7380:Returns: 0 on success, -EINVAL when args[0] contains invalid bits 7381 7382Valid bits in args[0] are:: 7383 7384 #define KVM_BUS_LOCK_DETECTION_OFF (1 << 0) 7385 #define KVM_BUS_LOCK_DETECTION_EXIT (1 << 1) 7386 7387Enabling this capability on a VM provides userspace with a way to select 7388a policy to handle the bus locks detected in guest. Userspace can obtain 7389the supported modes from the result of KVM_CHECK_EXTENSION and define it 7390through the KVM_ENABLE_CAP. 7391 7392KVM_BUS_LOCK_DETECTION_OFF and KVM_BUS_LOCK_DETECTION_EXIT are supported 7393currently and mutually exclusive with each other. More bits can be added in 7394the future. 7395 7396With KVM_BUS_LOCK_DETECTION_OFF set, bus locks in guest will not cause vm exits 7397so that no additional actions are needed. This is the default mode. 7398 7399With KVM_BUS_LOCK_DETECTION_EXIT set, vm exits happen when bus lock detected 7400in VM. KVM just exits to userspace when handling them. Userspace can enforce 7401its own throttling or other policy based mitigations. 7402 7403This capability is aimed to address the thread that VM can exploit bus locks to 7404degree the performance of the whole system. Once the userspace enable this 7405capability and select the KVM_BUS_LOCK_DETECTION_EXIT mode, KVM will set the 7406KVM_RUN_BUS_LOCK flag in vcpu-run->flags field and exit to userspace. Concerning 7407the bus lock vm exit can be preempted by a higher priority VM exit, the exit 7408notifications to userspace can be KVM_EXIT_BUS_LOCK or other reasons. 7409KVM_RUN_BUS_LOCK flag is used to distinguish between them. 7410 74117.23 KVM_CAP_PPC_DAWR1 7412---------------------- 7413 7414:Architectures: ppc 7415:Parameters: none 7416:Returns: 0 on success, -EINVAL when CPU doesn't support 2nd DAWR 7417 7418This capability can be used to check / enable 2nd DAWR feature provided 7419by POWER10 processor. 7420 7421 74227.24 KVM_CAP_VM_COPY_ENC_CONTEXT_FROM 7423------------------------------------- 7424 7425Architectures: x86 SEV enabled 7426Type: vm 7427Parameters: args[0] is the fd of the source vm 7428Returns: 0 on success; ENOTTY on error 7429 7430This capability enables userspace to copy encryption context from the vm 7431indicated by the fd to the vm this is called on. 7432 7433This is intended to support in-guest workloads scheduled by the host. This 7434allows the in-guest workload to maintain its own NPTs and keeps the two vms 7435from accidentally clobbering each other with interrupts and the like (separate 7436APIC/MSRs/etc). 7437 74387.25 KVM_CAP_SGX_ATTRIBUTE 7439-------------------------- 7440 7441:Architectures: x86 7442:Target: VM 7443:Parameters: args[0] is a file handle of a SGX attribute file in securityfs 7444:Returns: 0 on success, -EINVAL if the file handle is invalid or if a requested 7445 attribute is not supported by KVM. 7446 7447KVM_CAP_SGX_ATTRIBUTE enables a userspace VMM to grant a VM access to one or 7448more priveleged enclave attributes. args[0] must hold a file handle to a valid 7449SGX attribute file corresponding to an attribute that is supported/restricted 7450by KVM (currently only PROVISIONKEY). 7451 7452The SGX subsystem restricts access to a subset of enclave attributes to provide 7453additional security for an uncompromised kernel, e.g. use of the PROVISIONKEY 7454is restricted to deter malware from using the PROVISIONKEY to obtain a stable 7455system fingerprint. To prevent userspace from circumventing such restrictions 7456by running an enclave in a VM, KVM prevents access to privileged attributes by 7457default. 7458 7459See Documentation/x86/sgx.rst for more details. 7460 74617.26 KVM_CAP_PPC_RPT_INVALIDATE 7462------------------------------- 7463 7464:Capability: KVM_CAP_PPC_RPT_INVALIDATE 7465:Architectures: ppc 7466:Type: vm 7467 7468This capability indicates that the kernel is capable of handling 7469H_RPT_INVALIDATE hcall. 7470 7471In order to enable the use of H_RPT_INVALIDATE in the guest, 7472user space might have to advertise it for the guest. For example, 7473IBM pSeries (sPAPR) guest starts using it if "hcall-rpt-invalidate" is 7474present in the "ibm,hypertas-functions" device-tree property. 7475 7476This capability is enabled for hypervisors on platforms like POWER9 7477that support radix MMU. 7478 74797.27 KVM_CAP_EXIT_ON_EMULATION_FAILURE 7480-------------------------------------- 7481 7482:Architectures: x86 7483:Parameters: args[0] whether the feature should be enabled or not 7484 7485When this capability is enabled, an emulation failure will result in an exit 7486to userspace with KVM_INTERNAL_ERROR (except when the emulator was invoked 7487to handle a VMware backdoor instruction). Furthermore, KVM will now provide up 7488to 15 instruction bytes for any exit to userspace resulting from an emulation 7489failure. When these exits to userspace occur use the emulation_failure struct 7490instead of the internal struct. They both have the same layout, but the 7491emulation_failure struct matches the content better. It also explicitly 7492defines the 'flags' field which is used to describe the fields in the struct 7493that are valid (ie: if KVM_INTERNAL_ERROR_EMULATION_FLAG_INSTRUCTION_BYTES is 7494set in the 'flags' field then both 'insn_size' and 'insn_bytes' have valid data 7495in them.) 7496 74977.28 KVM_CAP_ARM_MTE 7498-------------------- 7499 7500:Architectures: arm64 7501:Parameters: none 7502 7503This capability indicates that KVM (and the hardware) supports exposing the 7504Memory Tagging Extensions (MTE) to the guest. It must also be enabled by the 7505VMM before creating any VCPUs to allow the guest access. Note that MTE is only 7506available to a guest running in AArch64 mode and enabling this capability will 7507cause attempts to create AArch32 VCPUs to fail. 7508 7509When enabled the guest is able to access tags associated with any memory given 7510to the guest. KVM will ensure that the tags are maintained during swap or 7511hibernation of the host; however the VMM needs to manually save/restore the 7512tags as appropriate if the VM is migrated. 7513 7514When this capability is enabled all memory in memslots must be mapped as 7515``MAP_ANONYMOUS`` or with a RAM-based file mapping (``tmpfs``, ``memfd``), 7516attempts to create a memslot with an invalid mmap will result in an 7517-EINVAL return. 7518 7519When enabled the VMM may make use of the ``KVM_ARM_MTE_COPY_TAGS`` ioctl to 7520perform a bulk copy of tags to/from the guest. 7521 75227.29 KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM 7523------------------------------------- 7524 7525Architectures: x86 SEV enabled 7526Type: vm 7527Parameters: args[0] is the fd of the source vm 7528Returns: 0 on success 7529 7530This capability enables userspace to migrate the encryption context from the VM 7531indicated by the fd to the VM this is called on. 7532 7533This is intended to support intra-host migration of VMs between userspace VMMs, 7534upgrading the VMM process without interrupting the guest. 7535 75367.30 KVM_CAP_PPC_AIL_MODE_3 7537------------------------------- 7538 7539:Capability: KVM_CAP_PPC_AIL_MODE_3 7540:Architectures: ppc 7541:Type: vm 7542 7543This capability indicates that the kernel supports the mode 3 setting for the 7544"Address Translation Mode on Interrupt" aka "Alternate Interrupt Location" 7545resource that is controlled with the H_SET_MODE hypercall. 7546 7547This capability allows a guest kernel to use a better-performance mode for 7548handling interrupts and system calls. 7549 75507.31 KVM_CAP_DISABLE_QUIRKS2 7551---------------------------- 7552 7553:Capability: KVM_CAP_DISABLE_QUIRKS2 7554:Parameters: args[0] - set of KVM quirks to disable 7555:Architectures: x86 7556:Type: vm 7557 7558This capability, if enabled, will cause KVM to disable some behavior 7559quirks. 7560 7561Calling KVM_CHECK_EXTENSION for this capability returns a bitmask of 7562quirks that can be disabled in KVM. 7563 7564The argument to KVM_ENABLE_CAP for this capability is a bitmask of 7565quirks to disable, and must be a subset of the bitmask returned by 7566KVM_CHECK_EXTENSION. 7567 7568The valid bits in cap.args[0] are: 7569 7570=================================== ============================================ 7571 KVM_X86_QUIRK_LINT0_REENABLED By default, the reset value for the LVT 7572 LINT0 register is 0x700 (APIC_MODE_EXTINT). 7573 When this quirk is disabled, the reset value 7574 is 0x10000 (APIC_LVT_MASKED). 7575 7576 KVM_X86_QUIRK_CD_NW_CLEARED By default, KVM clears CR0.CD and CR0.NW. 7577 When this quirk is disabled, KVM does not 7578 change the value of CR0.CD and CR0.NW. 7579 7580 KVM_X86_QUIRK_LAPIC_MMIO_HOLE By default, the MMIO LAPIC interface is 7581 available even when configured for x2APIC 7582 mode. When this quirk is disabled, KVM 7583 disables the MMIO LAPIC interface if the 7584 LAPIC is in x2APIC mode. 7585 7586 KVM_X86_QUIRK_OUT_7E_INC_RIP By default, KVM pre-increments %rip before 7587 exiting to userspace for an OUT instruction 7588 to port 0x7e. When this quirk is disabled, 7589 KVM does not pre-increment %rip before 7590 exiting to userspace. 7591 7592 KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT When this quirk is disabled, KVM sets 7593 CPUID.01H:ECX[bit 3] (MONITOR/MWAIT) if 7594 IA32_MISC_ENABLE[bit 18] (MWAIT) is set. 7595 Additionally, when this quirk is disabled, 7596 KVM clears CPUID.01H:ECX[bit 3] if 7597 IA32_MISC_ENABLE[bit 18] is cleared. 7598 7599 KVM_X86_QUIRK_FIX_HYPERCALL_INSN By default, KVM rewrites guest 7600 VMMCALL/VMCALL instructions to match the 7601 vendor's hypercall instruction for the 7602 system. When this quirk is disabled, KVM 7603 will no longer rewrite invalid guest 7604 hypercall instructions. Executing the 7605 incorrect hypercall instruction will 7606 generate a #UD within the guest. 7607 7608KVM_X86_QUIRK_MWAIT_NEVER_UD_FAULTS By default, KVM emulates MONITOR/MWAIT (if 7609 they are intercepted) as NOPs regardless of 7610 whether or not MONITOR/MWAIT are supported 7611 according to guest CPUID. When this quirk 7612 is disabled and KVM_X86_DISABLE_EXITS_MWAIT 7613 is not set (MONITOR/MWAIT are intercepted), 7614 KVM will inject a #UD on MONITOR/MWAIT if 7615 they're unsupported per guest CPUID. Note, 7616 KVM will modify MONITOR/MWAIT support in 7617 guest CPUID on writes to MISC_ENABLE if 7618 KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT is 7619 disabled. 7620=================================== ============================================ 7621 76227.32 KVM_CAP_MAX_VCPU_ID 7623------------------------ 7624 7625:Architectures: x86 7626:Target: VM 7627:Parameters: args[0] - maximum APIC ID value set for current VM 7628:Returns: 0 on success, -EINVAL if args[0] is beyond KVM_MAX_VCPU_IDS 7629 supported in KVM or if it has been set. 7630 7631This capability allows userspace to specify maximum possible APIC ID 7632assigned for current VM session prior to the creation of vCPUs, saving 7633memory for data structures indexed by the APIC ID. Userspace is able 7634to calculate the limit to APIC ID values from designated 7635CPU topology. 7636 7637The value can be changed only until KVM_ENABLE_CAP is set to a nonzero 7638value or until a vCPU is created. Upon creation of the first vCPU, 7639if the value was set to zero or KVM_ENABLE_CAP was not invoked, KVM 7640uses the return value of KVM_CHECK_EXTENSION(KVM_CAP_MAX_VCPU_ID) as 7641the maximum APIC ID. 7642 76437.33 KVM_CAP_X86_NOTIFY_VMEXIT 7644------------------------------ 7645 7646:Architectures: x86 7647:Target: VM 7648:Parameters: args[0] is the value of notify window as well as some flags 7649:Returns: 0 on success, -EINVAL if args[0] contains invalid flags or notify 7650 VM exit is unsupported. 7651 7652Bits 63:32 of args[0] are used for notify window. 7653Bits 31:0 of args[0] are for some flags. Valid bits are:: 7654 7655 #define KVM_X86_NOTIFY_VMEXIT_ENABLED (1 << 0) 7656 #define KVM_X86_NOTIFY_VMEXIT_USER (1 << 1) 7657 7658This capability allows userspace to configure the notify VM exit on/off 7659in per-VM scope during VM creation. Notify VM exit is disabled by default. 7660When userspace sets KVM_X86_NOTIFY_VMEXIT_ENABLED bit in args[0], VMM will 7661enable this feature with the notify window provided, which will generate 7662a VM exit if no event window occurs in VM non-root mode for a specified of 7663time (notify window). 7664 7665If KVM_X86_NOTIFY_VMEXIT_USER is set in args[0], upon notify VM exits happen, 7666KVM would exit to userspace for handling. 7667 7668This capability is aimed to mitigate the threat that malicious VMs can 7669cause CPU stuck (due to event windows don't open up) and make the CPU 7670unavailable to host or other VMs. 7671 76728. Other capabilities. 7673====================== 7674 7675This section lists capabilities that give information about other 7676features of the KVM implementation. 7677 76788.1 KVM_CAP_PPC_HWRNG 7679--------------------- 7680 7681:Architectures: ppc 7682 7683This capability, if KVM_CHECK_EXTENSION indicates that it is 7684available, means that the kernel has an implementation of the 7685H_RANDOM hypercall backed by a hardware random-number generator. 7686If present, the kernel H_RANDOM handler can be enabled for guest use 7687with the KVM_CAP_PPC_ENABLE_HCALL capability. 7688 76898.2 KVM_CAP_HYPERV_SYNIC 7690------------------------ 7691 7692:Architectures: x86 7693 7694This capability, if KVM_CHECK_EXTENSION indicates that it is 7695available, means that the kernel has an implementation of the 7696Hyper-V Synthetic interrupt controller(SynIC). Hyper-V SynIC is 7697used to support Windows Hyper-V based guest paravirt drivers(VMBus). 7698 7699In order to use SynIC, it has to be activated by setting this 7700capability via KVM_ENABLE_CAP ioctl on the vcpu fd. Note that this 7701will disable the use of APIC hardware virtualization even if supported 7702by the CPU, as it's incompatible with SynIC auto-EOI behavior. 7703 77048.3 KVM_CAP_PPC_RADIX_MMU 7705------------------------- 7706 7707:Architectures: ppc 7708 7709This capability, if KVM_CHECK_EXTENSION indicates that it is 7710available, means that the kernel can support guests using the 7711radix MMU defined in Power ISA V3.00 (as implemented in the POWER9 7712processor). 7713 77148.4 KVM_CAP_PPC_HASH_MMU_V3 7715--------------------------- 7716 7717:Architectures: ppc 7718 7719This capability, if KVM_CHECK_EXTENSION indicates that it is 7720available, means that the kernel can support guests using the 7721hashed page table MMU defined in Power ISA V3.00 (as implemented in 7722the POWER9 processor), including in-memory segment tables. 7723 77248.5 KVM_CAP_MIPS_VZ 7725------------------- 7726 7727:Architectures: mips 7728 7729This capability, if KVM_CHECK_EXTENSION on the main kvm handle indicates that 7730it is available, means that full hardware assisted virtualization capabilities 7731of the hardware are available for use through KVM. An appropriate 7732KVM_VM_MIPS_* type must be passed to KVM_CREATE_VM to create a VM which 7733utilises it. 7734 7735If KVM_CHECK_EXTENSION on a kvm VM handle indicates that this capability is 7736available, it means that the VM is using full hardware assisted virtualization 7737capabilities of the hardware. This is useful to check after creating a VM with 7738KVM_VM_MIPS_DEFAULT. 7739 7740The value returned by KVM_CHECK_EXTENSION should be compared against known 7741values (see below). All other values are reserved. This is to allow for the 7742possibility of other hardware assisted virtualization implementations which 7743may be incompatible with the MIPS VZ ASE. 7744 7745== ========================================================================== 7746 0 The trap & emulate implementation is in use to run guest code in user 7747 mode. Guest virtual memory segments are rearranged to fit the guest in the 7748 user mode address space. 7749 7750 1 The MIPS VZ ASE is in use, providing full hardware assisted 7751 virtualization, including standard guest virtual memory segments. 7752== ========================================================================== 7753 77548.6 KVM_CAP_MIPS_TE 7755------------------- 7756 7757:Architectures: mips 7758 7759This capability, if KVM_CHECK_EXTENSION on the main kvm handle indicates that 7760it is available, means that the trap & emulate implementation is available to 7761run guest code in user mode, even if KVM_CAP_MIPS_VZ indicates that hardware 7762assisted virtualisation is also available. KVM_VM_MIPS_TE (0) must be passed 7763to KVM_CREATE_VM to create a VM which utilises it. 7764 7765If KVM_CHECK_EXTENSION on a kvm VM handle indicates that this capability is 7766available, it means that the VM is using trap & emulate. 7767 77688.7 KVM_CAP_MIPS_64BIT 7769---------------------- 7770 7771:Architectures: mips 7772 7773This capability indicates the supported architecture type of the guest, i.e. the 7774supported register and address width. 7775 7776The values returned when this capability is checked by KVM_CHECK_EXTENSION on a 7777kvm VM handle correspond roughly to the CP0_Config.AT register field, and should 7778be checked specifically against known values (see below). All other values are 7779reserved. 7780 7781== ======================================================================== 7782 0 MIPS32 or microMIPS32. 7783 Both registers and addresses are 32-bits wide. 7784 It will only be possible to run 32-bit guest code. 7785 7786 1 MIPS64 or microMIPS64 with access only to 32-bit compatibility segments. 7787 Registers are 64-bits wide, but addresses are 32-bits wide. 7788 64-bit guest code may run but cannot access MIPS64 memory segments. 7789 It will also be possible to run 32-bit guest code. 7790 7791 2 MIPS64 or microMIPS64 with access to all address segments. 7792 Both registers and addresses are 64-bits wide. 7793 It will be possible to run 64-bit or 32-bit guest code. 7794== ======================================================================== 7795 77968.9 KVM_CAP_ARM_USER_IRQ 7797------------------------ 7798 7799:Architectures: arm64 7800 7801This capability, if KVM_CHECK_EXTENSION indicates that it is available, means 7802that if userspace creates a VM without an in-kernel interrupt controller, it 7803will be notified of changes to the output level of in-kernel emulated devices, 7804which can generate virtual interrupts, presented to the VM. 7805For such VMs, on every return to userspace, the kernel 7806updates the vcpu's run->s.regs.device_irq_level field to represent the actual 7807output level of the device. 7808 7809Whenever kvm detects a change in the device output level, kvm guarantees at 7810least one return to userspace before running the VM. This exit could either 7811be a KVM_EXIT_INTR or any other exit event, like KVM_EXIT_MMIO. This way, 7812userspace can always sample the device output level and re-compute the state of 7813the userspace interrupt controller. Userspace should always check the state 7814of run->s.regs.device_irq_level on every kvm exit. 7815The value in run->s.regs.device_irq_level can represent both level and edge 7816triggered interrupt signals, depending on the device. Edge triggered interrupt 7817signals will exit to userspace with the bit in run->s.regs.device_irq_level 7818set exactly once per edge signal. 7819 7820The field run->s.regs.device_irq_level is available independent of 7821run->kvm_valid_regs or run->kvm_dirty_regs bits. 7822 7823If KVM_CAP_ARM_USER_IRQ is supported, the KVM_CHECK_EXTENSION ioctl returns a 7824number larger than 0 indicating the version of this capability is implemented 7825and thereby which bits in run->s.regs.device_irq_level can signal values. 7826 7827Currently the following bits are defined for the device_irq_level bitmap:: 7828 7829 KVM_CAP_ARM_USER_IRQ >= 1: 7830 7831 KVM_ARM_DEV_EL1_VTIMER - EL1 virtual timer 7832 KVM_ARM_DEV_EL1_PTIMER - EL1 physical timer 7833 KVM_ARM_DEV_PMU - ARM PMU overflow interrupt signal 7834 7835Future versions of kvm may implement additional events. These will get 7836indicated by returning a higher number from KVM_CHECK_EXTENSION and will be 7837listed above. 7838 78398.10 KVM_CAP_PPC_SMT_POSSIBLE 7840----------------------------- 7841 7842:Architectures: ppc 7843 7844Querying this capability returns a bitmap indicating the possible 7845virtual SMT modes that can be set using KVM_CAP_PPC_SMT. If bit N 7846(counting from the right) is set, then a virtual SMT mode of 2^N is 7847available. 7848 78498.11 KVM_CAP_HYPERV_SYNIC2 7850-------------------------- 7851 7852:Architectures: x86 7853 7854This capability enables a newer version of Hyper-V Synthetic interrupt 7855controller (SynIC). The only difference with KVM_CAP_HYPERV_SYNIC is that KVM 7856doesn't clear SynIC message and event flags pages when they are enabled by 7857writing to the respective MSRs. 7858 78598.12 KVM_CAP_HYPERV_VP_INDEX 7860---------------------------- 7861 7862:Architectures: x86 7863 7864This capability indicates that userspace can load HV_X64_MSR_VP_INDEX msr. Its 7865value is used to denote the target vcpu for a SynIC interrupt. For 7866compatibilty, KVM initializes this msr to KVM's internal vcpu index. When this 7867capability is absent, userspace can still query this msr's value. 7868 78698.13 KVM_CAP_S390_AIS_MIGRATION 7870------------------------------- 7871 7872:Architectures: s390 7873:Parameters: none 7874 7875This capability indicates if the flic device will be able to get/set the 7876AIS states for migration via the KVM_DEV_FLIC_AISM_ALL attribute and allows 7877to discover this without having to create a flic device. 7878 78798.14 KVM_CAP_S390_PSW 7880--------------------- 7881 7882:Architectures: s390 7883 7884This capability indicates that the PSW is exposed via the kvm_run structure. 7885 78868.15 KVM_CAP_S390_GMAP 7887---------------------- 7888 7889:Architectures: s390 7890 7891This capability indicates that the user space memory used as guest mapping can 7892be anywhere in the user memory address space, as long as the memory slots are 7893aligned and sized to a segment (1MB) boundary. 7894 78958.16 KVM_CAP_S390_COW 7896--------------------- 7897 7898:Architectures: s390 7899 7900This capability indicates that the user space memory used as guest mapping can 7901use copy-on-write semantics as well as dirty pages tracking via read-only page 7902tables. 7903 79048.17 KVM_CAP_S390_BPB 7905--------------------- 7906 7907:Architectures: s390 7908 7909This capability indicates that kvm will implement the interfaces to handle 7910reset, migration and nested KVM for branch prediction blocking. The stfle 7911facility 82 should not be provided to the guest without this capability. 7912 79138.18 KVM_CAP_HYPERV_TLBFLUSH 7914---------------------------- 7915 7916:Architectures: x86 7917 7918This capability indicates that KVM supports paravirtualized Hyper-V TLB Flush 7919hypercalls: 7920HvFlushVirtualAddressSpace, HvFlushVirtualAddressSpaceEx, 7921HvFlushVirtualAddressList, HvFlushVirtualAddressListEx. 7922 79238.19 KVM_CAP_ARM_INJECT_SERROR_ESR 7924---------------------------------- 7925 7926:Architectures: arm64 7927 7928This capability indicates that userspace can specify (via the 7929KVM_SET_VCPU_EVENTS ioctl) the syndrome value reported to the guest when it 7930takes a virtual SError interrupt exception. 7931If KVM advertises this capability, userspace can only specify the ISS field for 7932the ESR syndrome. Other parts of the ESR, such as the EC are generated by the 7933CPU when the exception is taken. If this virtual SError is taken to EL1 using 7934AArch64, this value will be reported in the ISS field of ESR_ELx. 7935 7936See KVM_CAP_VCPU_EVENTS for more details. 7937 79388.20 KVM_CAP_HYPERV_SEND_IPI 7939---------------------------- 7940 7941:Architectures: x86 7942 7943This capability indicates that KVM supports paravirtualized Hyper-V IPI send 7944hypercalls: 7945HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx. 7946 79478.21 KVM_CAP_HYPERV_DIRECT_TLBFLUSH 7948----------------------------------- 7949 7950:Architectures: x86 7951 7952This capability indicates that KVM running on top of Hyper-V hypervisor 7953enables Direct TLB flush for its guests meaning that TLB flush 7954hypercalls are handled by Level 0 hypervisor (Hyper-V) bypassing KVM. 7955Due to the different ABI for hypercall parameters between Hyper-V and 7956KVM, enabling this capability effectively disables all hypercall 7957handling by KVM (as some KVM hypercall may be mistakenly treated as TLB 7958flush hypercalls by Hyper-V) so userspace should disable KVM identification 7959in CPUID and only exposes Hyper-V identification. In this case, guest 7960thinks it's running on Hyper-V and only use Hyper-V hypercalls. 7961 79628.22 KVM_CAP_S390_VCPU_RESETS 7963----------------------------- 7964 7965:Architectures: s390 7966 7967This capability indicates that the KVM_S390_NORMAL_RESET and 7968KVM_S390_CLEAR_RESET ioctls are available. 7969 79708.23 KVM_CAP_S390_PROTECTED 7971--------------------------- 7972 7973:Architectures: s390 7974 7975This capability indicates that the Ultravisor has been initialized and 7976KVM can therefore start protected VMs. 7977This capability governs the KVM_S390_PV_COMMAND ioctl and the 7978KVM_MP_STATE_LOAD MP_STATE. KVM_SET_MP_STATE can fail for protected 7979guests when the state change is invalid. 7980 79818.24 KVM_CAP_STEAL_TIME 7982----------------------- 7983 7984:Architectures: arm64, x86 7985 7986This capability indicates that KVM supports steal time accounting. 7987When steal time accounting is supported it may be enabled with 7988architecture-specific interfaces. This capability and the architecture- 7989specific interfaces must be consistent, i.e. if one says the feature 7990is supported, than the other should as well and vice versa. For arm64 7991see Documentation/virt/kvm/devices/vcpu.rst "KVM_ARM_VCPU_PVTIME_CTRL". 7992For x86 see Documentation/virt/kvm/x86/msr.rst "MSR_KVM_STEAL_TIME". 7993 79948.25 KVM_CAP_S390_DIAG318 7995------------------------- 7996 7997:Architectures: s390 7998 7999This capability enables a guest to set information about its control program 8000(i.e. guest kernel type and version). The information is helpful during 8001system/firmware service events, providing additional data about the guest 8002environments running on the machine. 8003 8004The information is associated with the DIAGNOSE 0x318 instruction, which sets 8005an 8-byte value consisting of a one-byte Control Program Name Code (CPNC) and 8006a 7-byte Control Program Version Code (CPVC). The CPNC determines what 8007environment the control program is running in (e.g. Linux, z/VM...), and the 8008CPVC is used for information specific to OS (e.g. Linux version, Linux 8009distribution...) 8010 8011If this capability is available, then the CPNC and CPVC can be synchronized 8012between KVM and userspace via the sync regs mechanism (KVM_SYNC_DIAG318). 8013 80148.26 KVM_CAP_X86_USER_SPACE_MSR 8015------------------------------- 8016 8017:Architectures: x86 8018 8019This capability indicates that KVM supports deflection of MSR reads and 8020writes to user space. It can be enabled on a VM level. If enabled, MSR 8021accesses that would usually trigger a #GP by KVM into the guest will 8022instead get bounced to user space through the KVM_EXIT_X86_RDMSR and 8023KVM_EXIT_X86_WRMSR exit notifications. 8024 80258.27 KVM_CAP_X86_MSR_FILTER 8026--------------------------- 8027 8028:Architectures: x86 8029 8030This capability indicates that KVM supports that accesses to user defined MSRs 8031may be rejected. With this capability exposed, KVM exports new VM ioctl 8032KVM_X86_SET_MSR_FILTER which user space can call to specify bitmaps of MSR 8033ranges that KVM should deny access to. 8034 8035In combination with KVM_CAP_X86_USER_SPACE_MSR, this allows user space to 8036trap and emulate MSRs that are outside of the scope of KVM as well as 8037limit the attack surface on KVM's MSR emulation code. 8038 80398.28 KVM_CAP_ENFORCE_PV_FEATURE_CPUID 8040------------------------------------- 8041 8042Architectures: x86 8043 8044When enabled, KVM will disable paravirtual features provided to the 8045guest according to the bits in the KVM_CPUID_FEATURES CPUID leaf 8046(0x40000001). Otherwise, a guest may use the paravirtual features 8047regardless of what has actually been exposed through the CPUID leaf. 8048 80498.29 KVM_CAP_DIRTY_LOG_RING/KVM_CAP_DIRTY_LOG_RING_ACQ_REL 8050---------------------------------------------------------- 8051 8052:Architectures: x86, arm64 8053:Parameters: args[0] - size of the dirty log ring 8054 8055KVM is capable of tracking dirty memory using ring buffers that are 8056mmaped into userspace; there is one dirty ring per vcpu. 8057 8058The dirty ring is available to userspace as an array of 8059``struct kvm_dirty_gfn``. Each dirty entry it's defined as:: 8060 8061 struct kvm_dirty_gfn { 8062 __u32 flags; 8063 __u32 slot; /* as_id | slot_id */ 8064 __u64 offset; 8065 }; 8066 8067The following values are defined for the flags field to define the 8068current state of the entry:: 8069 8070 #define KVM_DIRTY_GFN_F_DIRTY BIT(0) 8071 #define KVM_DIRTY_GFN_F_RESET BIT(1) 8072 #define KVM_DIRTY_GFN_F_MASK 0x3 8073 8074Userspace should call KVM_ENABLE_CAP ioctl right after KVM_CREATE_VM 8075ioctl to enable this capability for the new guest and set the size of 8076the rings. Enabling the capability is only allowed before creating any 8077vCPU, and the size of the ring must be a power of two. The larger the 8078ring buffer, the less likely the ring is full and the VM is forced to 8079exit to userspace. The optimal size depends on the workload, but it is 8080recommended that it be at least 64 KiB (4096 entries). 8081 8082Just like for dirty page bitmaps, the buffer tracks writes to 8083all user memory regions for which the KVM_MEM_LOG_DIRTY_PAGES flag was 8084set in KVM_SET_USER_MEMORY_REGION. Once a memory region is registered 8085with the flag set, userspace can start harvesting dirty pages from the 8086ring buffer. 8087 8088An entry in the ring buffer can be unused (flag bits ``00``), 8089dirty (flag bits ``01``) or harvested (flag bits ``1X``). The 8090state machine for the entry is as follows:: 8091 8092 dirtied harvested reset 8093 00 -----------> 01 -------------> 1X -------+ 8094 ^ | 8095 | | 8096 +------------------------------------------+ 8097 8098To harvest the dirty pages, userspace accesses the mmaped ring buffer 8099to read the dirty GFNs. If the flags has the DIRTY bit set (at this stage 8100the RESET bit must be cleared), then it means this GFN is a dirty GFN. 8101The userspace should harvest this GFN and mark the flags from state 8102``01b`` to ``1Xb`` (bit 0 will be ignored by KVM, but bit 1 must be set 8103to show that this GFN is harvested and waiting for a reset), and move 8104on to the next GFN. The userspace should continue to do this until the 8105flags of a GFN have the DIRTY bit cleared, meaning that it has harvested 8106all the dirty GFNs that were available. 8107 8108Note that on weakly ordered architectures, userspace accesses to the 8109ring buffer (and more specifically the 'flags' field) must be ordered, 8110using load-acquire/store-release accessors when available, or any 8111other memory barrier that will ensure this ordering. 8112 8113It's not necessary for userspace to harvest the all dirty GFNs at once. 8114However it must collect the dirty GFNs in sequence, i.e., the userspace 8115program cannot skip one dirty GFN to collect the one next to it. 8116 8117After processing one or more entries in the ring buffer, userspace 8118calls the VM ioctl KVM_RESET_DIRTY_RINGS to notify the kernel about 8119it, so that the kernel will reprotect those collected GFNs. 8120Therefore, the ioctl must be called *before* reading the content of 8121the dirty pages. 8122 8123The dirty ring can get full. When it happens, the KVM_RUN of the 8124vcpu will return with exit reason KVM_EXIT_DIRTY_LOG_FULL. 8125 8126The dirty ring interface has a major difference comparing to the 8127KVM_GET_DIRTY_LOG interface in that, when reading the dirty ring from 8128userspace, it's still possible that the kernel has not yet flushed the 8129processor's dirty page buffers into the kernel buffer (with dirty bitmaps, the 8130flushing is done by the KVM_GET_DIRTY_LOG ioctl). To achieve that, one 8131needs to kick the vcpu out of KVM_RUN using a signal. The resulting 8132vmexit ensures that all dirty GFNs are flushed to the dirty rings. 8133 8134NOTE: KVM_CAP_DIRTY_LOG_RING_ACQ_REL is the only capability that 8135should be exposed by weakly ordered architecture, in order to indicate 8136the additional memory ordering requirements imposed on userspace when 8137reading the state of an entry and mutating it from DIRTY to HARVESTED. 8138Architecture with TSO-like ordering (such as x86) are allowed to 8139expose both KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL 8140to userspace. 8141 8142After enabling the dirty rings, the userspace needs to detect the 8143capability of KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP to see whether the 8144ring structures can be backed by per-slot bitmaps. With this capability 8145advertised, it means the architecture can dirty guest pages without 8146vcpu/ring context, so that some of the dirty information will still be 8147maintained in the bitmap structure. KVM_CAP_DIRTY_LOG_RING_WITH_BITMAP 8148can't be enabled if the capability of KVM_CAP_DIRTY_LOG_RING_ACQ_REL 8149hasn't been enabled, or any memslot has been existing. 8150 8151Note that the bitmap here is only a backup of the ring structure. The 8152use of the ring and bitmap combination is only beneficial if there is 8153only a very small amount of memory that is dirtied out of vcpu/ring 8154context. Otherwise, the stand-alone per-slot bitmap mechanism needs to 8155be considered. 8156 8157To collect dirty bits in the backup bitmap, userspace can use the same 8158KVM_GET_DIRTY_LOG ioctl. KVM_CLEAR_DIRTY_LOG isn't needed as long as all 8159the generation of the dirty bits is done in a single pass. Collecting 8160the dirty bitmap should be the very last thing that the VMM does before 8161considering the state as complete. VMM needs to ensure that the dirty 8162state is final and avoid missing dirty pages from another ioctl ordered 8163after the bitmap collection. 8164 8165NOTE: Multiple examples of using the backup bitmap: (1) save vgic/its 8166tables through command KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_SAVE_TABLES} on 8167KVM device "kvm-arm-vgic-its". (2) restore vgic/its tables through 8168command KVM_DEV_ARM_{VGIC_GRP_CTRL, ITS_RESTORE_TABLES} on KVM device 8169"kvm-arm-vgic-its". VGICv3 LPI pending status is restored. (3) save 8170vgic3 pending table through KVM_DEV_ARM_VGIC_{GRP_CTRL, SAVE_PENDING_TABLES} 8171command on KVM device "kvm-arm-vgic-v3". 8172 81738.30 KVM_CAP_XEN_HVM 8174-------------------- 8175 8176:Architectures: x86 8177 8178This capability indicates the features that Xen supports for hosting Xen 8179PVHVM guests. Valid flags are:: 8180 8181 #define KVM_XEN_HVM_CONFIG_HYPERCALL_MSR (1 << 0) 8182 #define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL (1 << 1) 8183 #define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2) 8184 #define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3) 8185 #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4) 8186 #define KVM_XEN_HVM_CONFIG_EVTCHN_SEND (1 << 5) 8187 #define KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG (1 << 6) 8188 8189The KVM_XEN_HVM_CONFIG_HYPERCALL_MSR flag indicates that the KVM_XEN_HVM_CONFIG 8190ioctl is available, for the guest to set its hypercall page. 8191 8192If KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL is also set, the same flag may also be 8193provided in the flags to KVM_XEN_HVM_CONFIG, without providing hypercall page 8194contents, to request that KVM generate hypercall page content automatically 8195and also enable interception of guest hypercalls with KVM_EXIT_XEN. 8196 8197The KVM_XEN_HVM_CONFIG_SHARED_INFO flag indicates the availability of the 8198KVM_XEN_HVM_SET_ATTR, KVM_XEN_HVM_GET_ATTR, KVM_XEN_VCPU_SET_ATTR and 8199KVM_XEN_VCPU_GET_ATTR ioctls, as well as the delivery of exception vectors 8200for event channel upcalls when the evtchn_upcall_pending field of a vcpu's 8201vcpu_info is set. 8202 8203The KVM_XEN_HVM_CONFIG_RUNSTATE flag indicates that the runstate-related 8204features KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADDR/_CURRENT/_DATA/_ADJUST are 8205supported by the KVM_XEN_VCPU_SET_ATTR/KVM_XEN_VCPU_GET_ATTR ioctls. 8206 8207The KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL flag indicates that IRQ routing entries 8208of the type KVM_IRQ_ROUTING_XEN_EVTCHN are supported, with the priority 8209field set to indicate 2 level event channel delivery. 8210 8211The KVM_XEN_HVM_CONFIG_EVTCHN_SEND flag indicates that KVM supports 8212injecting event channel events directly into the guest with the 8213KVM_XEN_HVM_EVTCHN_SEND ioctl. It also indicates support for the 8214KVM_XEN_ATTR_TYPE_EVTCHN/XEN_VERSION HVM attributes and the 8215KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID/TIMER/UPCALL_VECTOR vCPU attributes. 8216related to event channel delivery, timers, and the XENVER_version 8217interception. 8218 8219The KVM_XEN_HVM_CONFIG_RUNSTATE_UPDATE_FLAG flag indicates that KVM supports 8220the KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG attribute in the KVM_XEN_SET_ATTR 8221and KVM_XEN_GET_ATTR ioctls. This controls whether KVM will set the 8222XEN_RUNSTATE_UPDATE flag in guest memory mapped vcpu_runstate_info during 8223updates of the runstate information. Note that versions of KVM which support 8224the RUNSTATE feature above, but not thie RUNSTATE_UPDATE_FLAG feature, will 8225always set the XEN_RUNSTATE_UPDATE flag when updating the guest structure, 8226which is perhaps counterintuitive. When this flag is advertised, KVM will 8227behave more correctly, not using the XEN_RUNSTATE_UPDATE flag until/unless 8228specifically enabled (by the guest making the hypercall, causing the VMM 8229to enable the KVM_XEN_ATTR_TYPE_RUNSTATE_UPDATE_FLAG attribute). 8230 82318.31 KVM_CAP_PPC_MULTITCE 8232------------------------- 8233 8234:Capability: KVM_CAP_PPC_MULTITCE 8235:Architectures: ppc 8236:Type: vm 8237 8238This capability means the kernel is capable of handling hypercalls 8239H_PUT_TCE_INDIRECT and H_STUFF_TCE without passing those into the user 8240space. This significantly accelerates DMA operations for PPC KVM guests. 8241User space should expect that its handlers for these hypercalls 8242are not going to be called if user space previously registered LIOBN 8243in KVM (via KVM_CREATE_SPAPR_TCE or similar calls). 8244 8245In order to enable H_PUT_TCE_INDIRECT and H_STUFF_TCE use in the guest, 8246user space might have to advertise it for the guest. For example, 8247IBM pSeries (sPAPR) guest starts using them if "hcall-multi-tce" is 8248present in the "ibm,hypertas-functions" device-tree property. 8249 8250The hypercalls mentioned above may or may not be processed successfully 8251in the kernel based fast path. If they can not be handled by the kernel, 8252they will get passed on to user space. So user space still has to have 8253an implementation for these despite the in kernel acceleration. 8254 8255This capability is always enabled. 8256 82578.32 KVM_CAP_PTP_KVM 8258-------------------- 8259 8260:Architectures: arm64 8261 8262This capability indicates that the KVM virtual PTP service is 8263supported in the host. A VMM can check whether the service is 8264available to the guest on migration. 8265 82668.33 KVM_CAP_HYPERV_ENFORCE_CPUID 8267--------------------------------- 8268 8269Architectures: x86 8270 8271When enabled, KVM will disable emulated Hyper-V features provided to the 8272guest according to the bits Hyper-V CPUID feature leaves. Otherwise, all 8273currently implmented Hyper-V features are provided unconditionally when 8274Hyper-V identification is set in the HYPERV_CPUID_INTERFACE (0x40000001) 8275leaf. 8276 82778.34 KVM_CAP_EXIT_HYPERCALL 8278--------------------------- 8279 8280:Capability: KVM_CAP_EXIT_HYPERCALL 8281:Architectures: x86 8282:Type: vm 8283 8284This capability, if enabled, will cause KVM to exit to userspace 8285with KVM_EXIT_HYPERCALL exit reason to process some hypercalls. 8286 8287Calling KVM_CHECK_EXTENSION for this capability will return a bitmask 8288of hypercalls that can be configured to exit to userspace. 8289Right now, the only such hypercall is KVM_HC_MAP_GPA_RANGE. 8290 8291The argument to KVM_ENABLE_CAP is also a bitmask, and must be a subset 8292of the result of KVM_CHECK_EXTENSION. KVM will forward to userspace 8293the hypercalls whose corresponding bit is in the argument, and return 8294ENOSYS for the others. 8295 82968.35 KVM_CAP_PMU_CAPABILITY 8297--------------------------- 8298 8299:Capability KVM_CAP_PMU_CAPABILITY 8300:Architectures: x86 8301:Type: vm 8302:Parameters: arg[0] is bitmask of PMU virtualization capabilities. 8303:Returns 0 on success, -EINVAL when arg[0] contains invalid bits 8304 8305This capability alters PMU virtualization in KVM. 8306 8307Calling KVM_CHECK_EXTENSION for this capability returns a bitmask of 8308PMU virtualization capabilities that can be adjusted on a VM. 8309 8310The argument to KVM_ENABLE_CAP is also a bitmask and selects specific 8311PMU virtualization capabilities to be applied to the VM. This can 8312only be invoked on a VM prior to the creation of VCPUs. 8313 8314At this time, KVM_PMU_CAP_DISABLE is the only capability. Setting 8315this capability will disable PMU virtualization for that VM. Usermode 8316should adjust CPUID leaf 0xA to reflect that the PMU is disabled. 8317 83188.36 KVM_CAP_ARM_SYSTEM_SUSPEND 8319------------------------------- 8320 8321:Capability: KVM_CAP_ARM_SYSTEM_SUSPEND 8322:Architectures: arm64 8323:Type: vm 8324 8325When enabled, KVM will exit to userspace with KVM_EXIT_SYSTEM_EVENT of 8326type KVM_SYSTEM_EVENT_SUSPEND to process the guest suspend request. 8327 83288.37 KVM_CAP_S390_PROTECTED_DUMP 8329-------------------------------- 8330 8331:Capability: KVM_CAP_S390_PROTECTED_DUMP 8332:Architectures: s390 8333:Type: vm 8334 8335This capability indicates that KVM and the Ultravisor support dumping 8336PV guests. The `KVM_PV_DUMP` command is available for the 8337`KVM_S390_PV_COMMAND` ioctl and the `KVM_PV_INFO` command provides 8338dump related UV data. Also the vcpu ioctl `KVM_S390_PV_CPU_COMMAND` is 8339available and supports the `KVM_PV_DUMP_CPU` subcommand. 8340 83418.38 KVM_CAP_VM_DISABLE_NX_HUGE_PAGES 8342------------------------------------- 8343 8344:Capability: KVM_CAP_VM_DISABLE_NX_HUGE_PAGES 8345:Architectures: x86 8346:Type: vm 8347:Parameters: arg[0] must be 0. 8348:Returns: 0 on success, -EPERM if the userspace process does not 8349 have CAP_SYS_BOOT, -EINVAL if args[0] is not 0 or any vCPUs have been 8350 created. 8351 8352This capability disables the NX huge pages mitigation for iTLB MULTIHIT. 8353 8354The capability has no effect if the nx_huge_pages module parameter is not set. 8355 8356This capability may only be set before any vCPUs are created. 8357 83588.39 KVM_CAP_S390_CPU_TOPOLOGY 8359------------------------------ 8360 8361:Capability: KVM_CAP_S390_CPU_TOPOLOGY 8362:Architectures: s390 8363:Type: vm 8364 8365This capability indicates that KVM will provide the S390 CPU Topology 8366facility which consist of the interpretation of the PTF instruction for 8367the function code 2 along with interception and forwarding of both the 8368PTF instruction with function codes 0 or 1 and the STSI(15,1,x) 8369instruction to the userland hypervisor. 8370 8371The stfle facility 11, CPU Topology facility, should not be indicated 8372to the guest without this capability. 8373 8374When this capability is present, KVM provides a new attribute group 8375on vm fd, KVM_S390_VM_CPU_TOPOLOGY. 8376This new attribute allows to get, set or clear the Modified Change 8377Topology Report (MTCR) bit of the SCA through the kvm_device_attr 8378structure. 8379 8380When getting the Modified Change Topology Report value, the attr->addr 8381must point to a byte where the value will be stored or retrieved from. 8382 83839. Known KVM API problems 8384========================= 8385 8386In some cases, KVM's API has some inconsistencies or common pitfalls 8387that userspace need to be aware of. This section details some of 8388these issues. 8389 8390Most of them are architecture specific, so the section is split by 8391architecture. 8392 83939.1. x86 8394-------- 8395 8396``KVM_GET_SUPPORTED_CPUID`` issues 8397^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 8398 8399In general, ``KVM_GET_SUPPORTED_CPUID`` is designed so that it is possible 8400to take its result and pass it directly to ``KVM_SET_CPUID2``. This section 8401documents some cases in which that requires some care. 8402 8403Local APIC features 8404~~~~~~~~~~~~~~~~~~~ 8405 8406CPU[EAX=1]:ECX[21] (X2APIC) is reported by ``KVM_GET_SUPPORTED_CPUID``, 8407but it can only be enabled if ``KVM_CREATE_IRQCHIP`` or 8408``KVM_ENABLE_CAP(KVM_CAP_IRQCHIP_SPLIT)`` are used to enable in-kernel emulation of 8409the local APIC. 8410 8411The same is true for the ``KVM_FEATURE_PV_UNHALT`` paravirtualized feature. 8412 8413CPU[EAX=1]:ECX[24] (TSC_DEADLINE) is not reported by ``KVM_GET_SUPPORTED_CPUID``. 8414It can be enabled if ``KVM_CAP_TSC_DEADLINE_TIMER`` is present and the kernel 8415has enabled in-kernel emulation of the local APIC. 8416 8417CPU topology 8418~~~~~~~~~~~~ 8419 8420Several CPUID values include topology information for the host CPU: 84210x0b and 0x1f for Intel systems, 0x8000001e for AMD systems. Different 8422versions of KVM return different values for this information and userspace 8423should not rely on it. Currently they return all zeroes. 8424 8425If userspace wishes to set up a guest topology, it should be careful that 8426the values of these three leaves differ for each CPU. In particular, 8427the APIC ID is found in EDX for all subleaves of 0x0b and 0x1f, and in EAX 8428for 0x8000001e; the latter also encodes the core id and node id in bits 84297:0 of EBX and ECX respectively. 8430 8431Obsolete ioctls and capabilities 8432^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 8433 8434KVM_CAP_DISABLE_QUIRKS does not let userspace know which quirks are actually 8435available. Use ``KVM_CHECK_EXTENSION(KVM_CAP_DISABLE_QUIRKS2)`` instead if 8436available. 8437 8438Ordering of KVM_GET_*/KVM_SET_* ioctls 8439^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 8440 8441TBD 8442