1.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later 2 3.. _image-source-controls: 4 5****************************** 6Image Source Control Reference 7****************************** 8 9The Image Source control class is intended for low-level control of 10image source devices such as image sensors. The devices feature an 11analogue to digital converter and a bus transmitter to transmit the 12image data out of the device. 13 14 15.. _image-source-control-id: 16 17Image Source Control IDs 18======================== 19 20``V4L2_CID_IMAGE_SOURCE_CLASS (class)`` 21 The IMAGE_SOURCE class descriptor. 22 23``V4L2_CID_VBLANK (integer)`` 24 Vertical blanking. The idle period after every frame during which no 25 image data is produced. The unit of vertical blanking is a line. 26 Every line has length of the image width plus horizontal blanking at 27 the pixel rate defined by ``V4L2_CID_PIXEL_RATE`` control in the 28 same sub-device. 29 30``V4L2_CID_HBLANK (integer)`` 31 Horizontal blanking. The idle period after every line of image data 32 during which no image data is produced. The unit of horizontal 33 blanking is pixels. 34 35``V4L2_CID_ANALOGUE_GAIN (integer)`` 36 Analogue gain is gain affecting all colour components in the pixel 37 matrix. The gain operation is performed in the analogue domain 38 before A/D conversion. 39 40``V4L2_CID_TEST_PATTERN_RED (integer)`` 41 Test pattern red colour component. 42 43``V4L2_CID_TEST_PATTERN_GREENR (integer)`` 44 Test pattern green (next to red) colour component. 45 46``V4L2_CID_TEST_PATTERN_BLUE (integer)`` 47 Test pattern blue colour component. 48 49``V4L2_CID_TEST_PATTERN_GREENB (integer)`` 50 Test pattern green (next to blue) colour component. 51 52``V4L2_CID_UNIT_CELL_SIZE (struct)`` 53 This control returns the unit cell size in nanometers. The struct 54 :c:type:`v4l2_area` provides the width and the height in separate 55 fields to take into consideration asymmetric pixels. 56 This control does not take into consideration any possible hardware 57 binning. 58 The unit cell consists of the whole area of the pixel, sensitive and 59 non-sensitive. 60 This control is required for automatic calibration of sensors/cameras. 61 62.. c:type:: v4l2_area 63 64.. flat-table:: struct v4l2_area 65 :header-rows: 0 66 :stub-columns: 0 67 :widths: 1 1 2 68 69 * - __u32 70 - ``width`` 71 - Width of the area. 72 * - __u32 73 - ``height`` 74 - Height of the area. 75