1=================================== 2In-kernel memory-mapped I/O tracing 3=================================== 4 5 6Home page and links to optional user space tools: 7 8 http://nouveau.freedesktop.org/wiki/MmioTrace 9 10MMIO tracing was originally developed by Intel around 2003 for their Fault 11Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel, 12Jeff Muizelaar created a tool for tracing MMIO accesses with the Nouveau 13project in mind. Since then many people have contributed. 14 15Mmiotrace was built for reverse engineering any memory-mapped IO device with 16the Nouveau project as the first real user. Only x86 and x86_64 architectures 17are supported. 18 19Out-of-tree mmiotrace was originally modified for mainline inclusion and 20ftrace framework by Pekka Paalanen <pq@iki.fi>. 21 22 23Preparation 24----------- 25 26Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is 27disabled by default, so it is safe to have this set to yes. SMP systems are 28supported, but tracing is unreliable and may miss events if more than one CPU 29is on-line, therefore mmiotrace takes all but one CPU off-line during run-time 30activation. You can re-enable CPUs by hand, but you have been warned, there 31is no way to automatically detect if you are losing events due to CPUs racing. 32 33 34Usage Quick Reference 35--------------------- 36:: 37 38 $ mount -t debugfs debugfs /sys/kernel/debug 39 $ echo mmiotrace > /sys/kernel/debug/tracing/current_tracer 40 $ cat /sys/kernel/debug/tracing/trace_pipe > mydump.txt & 41 Start X or whatever. 42 $ echo "X is up" > /sys/kernel/debug/tracing/trace_marker 43 $ echo nop > /sys/kernel/debug/tracing/current_tracer 44 Check for lost events. 45 46 47Usage 48----- 49 50Make sure debugfs is mounted to /sys/kernel/debug. 51If not (requires root privileges):: 52 53 $ mount -t debugfs debugfs /sys/kernel/debug 54 55Check that the driver you are about to trace is not loaded. 56 57Activate mmiotrace (requires root privileges):: 58 59 $ echo mmiotrace > /sys/kernel/debug/tracing/current_tracer 60 61Start storing the trace:: 62 63 $ cat /sys/kernel/debug/tracing/trace_pipe > mydump.txt & 64 65The 'cat' process should stay running (sleeping) in the background. 66 67Load the driver you want to trace and use it. Mmiotrace will only catch MMIO 68accesses to areas that are ioremapped while mmiotrace is active. 69 70During tracing you can place comments (markers) into the trace by 71$ echo "X is up" > /sys/kernel/debug/tracing/trace_marker 72This makes it easier to see which part of the (huge) trace corresponds to 73which action. It is recommended to place descriptive markers about what you 74do. 75 76Shut down mmiotrace (requires root privileges):: 77 78 $ echo nop > /sys/kernel/debug/tracing/current_tracer 79 80The 'cat' process exits. If it does not, kill it by issuing 'fg' command and 81pressing ctrl+c. 82 83Check that mmiotrace did not lose events due to a buffer filling up. Either:: 84 85 $ grep -i lost mydump.txt 86 87which tells you exactly how many events were lost, or use:: 88 89 $ dmesg 90 91to view your kernel log and look for "mmiotrace has lost events" warning. If 92events were lost, the trace is incomplete. You should enlarge the buffers and 93try again. Buffers are enlarged by first seeing how large the current buffers 94are:: 95 96 $ cat /sys/kernel/debug/tracing/buffer_size_kb 97 98gives you a number. Approximately double this number and write it back, for 99instance:: 100 101 $ echo 128000 > /sys/kernel/debug/tracing/buffer_size_kb 102 103Then start again from the top. 104 105If you are doing a trace for a driver project, e.g. Nouveau, you should also 106do the following before sending your results:: 107 108 $ lspci -vvv > lspci.txt 109 $ dmesg > dmesg.txt 110 $ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt 111 112and then send the .tar.gz file. The trace compresses considerably. Replace 113"pciid" and "nick" with the PCI ID or model name of your piece of hardware 114under investigation and your nickname. 115 116 117How Mmiotrace Works 118------------------- 119 120Access to hardware IO-memory is gained by mapping addresses from PCI bus by 121calling one of the ioremap_*() functions. Mmiotrace is hooked into the 122__ioremap() function and gets called whenever a mapping is created. Mapping is 123an event that is recorded into the trace log. Note that ISA range mappings 124are not caught, since the mapping always exists and is returned directly. 125 126MMIO accesses are recorded via page faults. Just before __ioremap() returns, 127the mapped pages are marked as not present. Any access to the pages causes a 128fault. The page fault handler calls mmiotrace to handle the fault. Mmiotrace 129marks the page present, sets TF flag to achieve single stepping and exits the 130fault handler. The instruction that faulted is executed and debug trap is 131entered. Here mmiotrace again marks the page as not present. The instruction 132is decoded to get the type of operation (read/write), data width and the value 133read or written. These are stored to the trace log. 134 135Setting the page present in the page fault handler has a race condition on SMP 136machines. During the single stepping other CPUs may run freely on that page 137and events can be missed without a notice. Re-enabling other CPUs during 138tracing is discouraged. 139 140 141Trace Log Format 142---------------- 143 144The raw log is text and easily filtered with e.g. grep and awk. One record is 145one line in the log. A record starts with a keyword, followed by keyword- 146dependent arguments. Arguments are separated by a space, or continue until the 147end of line. The format for version 20070824 is as follows: 148 149Explanation Keyword Space-separated arguments 150--------------------------------------------------------------------------- 151 152read event R width, timestamp, map id, physical, value, PC, PID 153write event W width, timestamp, map id, physical, value, PC, PID 154ioremap event MAP timestamp, map id, physical, virtual, length, PC, PID 155iounmap event UNMAP timestamp, map id, PC, PID 156marker MARK timestamp, text 157version VERSION the string "20070824" 158info for reader LSPCI one line from lspci -v 159PCI address map PCIDEV space-separated /proc/bus/pci/devices data 160unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID 161 162Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual 163is a kernel virtual address. Width is the data width in bytes and value is the 164data value. Map id is an arbitrary id number identifying the mapping that was 165used in an operation. PC is the program counter and PID is process id. PC is 166zero if it is not recorded. PID is always zero as tracing MMIO accesses 167originating in user space memory is not yet supported. 168 169For instance, the following awk filter will pass all 32-bit writes that target 170physical addresses in the range [0xfb73ce40, 0xfb800000] 171:: 172 173 $ awk '/W 4 / { adr=strtonum($5); if (adr >= 0xfb73ce40 && 174 adr < 0xfb800000) print; }' 175 176 177Tools for Developers 178-------------------- 179 180The user space tools include utilities for: 181 - replacing numeric addresses and values with hardware register names 182 - replaying MMIO logs, i.e., re-executing the recorded writes 183 184 185