1.. SPDX-License-Identifier: GPL-2.0
2
3==================================
4Fprobe - Function entry/exit probe
5==================================
6
7.. Author: Masami Hiramatsu <mhiramat@kernel.org>
8
9Introduction
10============
11
12Fprobe is a function entry/exit probe mechanism based on ftrace.
13Instead of using ftrace full feature, if you only want to attach callbacks
14on function entry and exit, similar to the kprobes and kretprobes, you can
15use fprobe. Compared with kprobes and kretprobes, fprobe gives faster
16instrumentation for multiple functions with single handler. This document
17describes how to use fprobe.
18
19The usage of fprobe
20===================
21
22The fprobe is a wrapper of ftrace (+ kretprobe-like return callback) to
23attach callbacks to multiple function entry and exit. User needs to set up
24the `struct fprobe` and pass it to `register_fprobe()`.
25
26Typically, `fprobe` data structure is initialized with the `entry_handler`
27and/or `exit_handler` as below.
28
29.. code-block:: c
30
31 struct fprobe fp = {
32        .entry_handler  = my_entry_callback,
33        .exit_handler   = my_exit_callback,
34 };
35
36To enable the fprobe, call one of register_fprobe(), register_fprobe_ips(), and
37register_fprobe_syms(). These functions register the fprobe with different types
38of parameters.
39
40The register_fprobe() enables a fprobe by function-name filters.
41E.g. this enables @fp on "func*()" function except "func2()".::
42
43  register_fprobe(&fp, "func*", "func2");
44
45The register_fprobe_ips() enables a fprobe by ftrace-location addresses.
46E.g.
47
48.. code-block:: c
49
50  unsigned long ips[] = { 0x.... };
51
52  register_fprobe_ips(&fp, ips, ARRAY_SIZE(ips));
53
54And the register_fprobe_syms() enables a fprobe by symbol names.
55E.g.
56
57.. code-block:: c
58
59  char syms[] = {"func1", "func2", "func3"};
60
61  register_fprobe_syms(&fp, syms, ARRAY_SIZE(syms));
62
63To disable (remove from functions) this fprobe, call::
64
65  unregister_fprobe(&fp);
66
67You can temporally (soft) disable the fprobe by::
68
69  disable_fprobe(&fp);
70
71and resume by::
72
73  enable_fprobe(&fp);
74
75The above is defined by including the header::
76
77  #include <linux/fprobe.h>
78
79Same as ftrace, the registered callbacks will start being called some time
80after the register_fprobe() is called and before it returns. See
81:file:`Documentation/trace/ftrace.rst`.
82
83Also, the unregister_fprobe() will guarantee that the both enter and exit
84handlers are no longer being called by functions after unregister_fprobe()
85returns as same as unregister_ftrace_function().
86
87The fprobe entry/exit handler
88=============================
89
90The prototype of the entry/exit callback function are as follows:
91
92.. code-block:: c
93
94 int entry_callback(struct fprobe *fp, unsigned long entry_ip, unsigned long ret_ip, struct pt_regs *regs, void *entry_data);
95
96 void exit_callback(struct fprobe *fp, unsigned long entry_ip, unsigned long ret_ip, struct pt_regs *regs, void *entry_data);
97
98Note that the @entry_ip is saved at function entry and passed to exit handler.
99If the entry callback function returns !0, the corresponding exit callback will be cancelled.
100
101@fp
102        This is the address of `fprobe` data structure related to this handler.
103        You can embed the `fprobe` to your data structure and get it by
104        container_of() macro from @fp. The @fp must not be NULL.
105
106@entry_ip
107        This is the ftrace address of the traced function (both entry and exit).
108        Note that this may not be the actual entry address of the function but
109        the address where the ftrace is instrumented.
110
111@ret_ip
112        This is the return address that the traced function will return to,
113        somewhere in the caller. This can be used at both entry and exit.
114
115@regs
116        This is the `pt_regs` data structure at the entry and exit. Note that
117        the instruction pointer of @regs may be different from the @entry_ip
118        in the entry_handler. If you need traced instruction pointer, you need
119        to use @entry_ip. On the other hand, in the exit_handler, the instruction
120        pointer of @regs is set to the current return address.
121
122@entry_data
123        This is a local storage to share the data between entry and exit handlers.
124        This storage is NULL by default. If the user specify `exit_handler` field
125        and `entry_data_size` field when registering the fprobe, the storage is
126        allocated and passed to both `entry_handler` and `exit_handler`.
127
128Share the callbacks with kprobes
129================================
130
131Since the recursion safeness of the fprobe (and ftrace) is a bit different
132from the kprobes, this may cause an issue if user wants to run the same
133code from the fprobe and the kprobes.
134
135Kprobes has per-cpu 'current_kprobe' variable which protects the kprobe
136handler from recursion in all cases. On the other hand, fprobe uses
137only ftrace_test_recursion_trylock(). This allows interrupt context to
138call another (or same) fprobe while the fprobe user handler is running.
139
140This is not a matter if the common callback code has its own recursion
141detection, or it can handle the recursion in the different contexts
142(normal/interrupt/NMI.)
143But if it relies on the 'current_kprobe' recursion lock, it has to check
144kprobe_running() and use kprobe_busy_*() APIs.
145
146Fprobe has FPROBE_FL_KPROBE_SHARED flag to do this. If your common callback
147code will be shared with kprobes, please set FPROBE_FL_KPROBE_SHARED
148*before* registering the fprobe, like:
149
150.. code-block:: c
151
152 fprobe.flags = FPROBE_FL_KPROBE_SHARED;
153
154 register_fprobe(&fprobe, "func*", NULL);
155
156This will protect your common callback from the nested call.
157
158The missed counter
159==================
160
161The `fprobe` data structure has `fprobe::nmissed` counter field as same as
162kprobes.
163This counter counts up when;
164
165 - fprobe fails to take ftrace_recursion lock. This usually means that a function
166   which is traced by other ftrace users is called from the entry_handler.
167
168 - fprobe fails to setup the function exit because of the shortage of rethook
169   (the shadow stack for hooking the function return.)
170
171The `fprobe::nmissed` field counts up in both cases. Therefore, the former
172skips both of entry and exit callback and the latter skips the exit
173callback, but in both case the counter will increase by 1.
174
175Note that if you set the FTRACE_OPS_FL_RECURSION and/or FTRACE_OPS_FL_RCU to
176`fprobe::ops::flags` (ftrace_ops::flags) when registering the fprobe, this
177counter may not work correctly, because ftrace skips the fprobe function which
178increase the counter.
179
180
181Functions and structures
182========================
183
184.. kernel-doc:: include/linux/fprobe.h
185.. kernel-doc:: kernel/trace/fprobe.c
186
187