1.. SPDX-License-Identifier: GPL-2.0
2
3=====================================
4SMARTPQI - Microsemi Smart PQI Driver
5=====================================
6
7This file describes the smartpqi SCSI driver for Microsemi
8(http://www.microsemi.com) PQI controllers. The smartpqi driver
9is the next generation SCSI driver for Microsemi Corp. The smartpqi
10driver is the first SCSI driver to implement the PQI queuing model.
11
12The smartpqi driver will replace the aacraid driver for Adaptec Series 9
13controllers. Customers running an older kernel (Pre-4.9) using an Adaptec
14Series 9 controller will have to configure the smartpqi driver or their
15volumes will not be added to the OS.
16
17For Microsemi smartpqi controller support, enable the smartpqi driver
18when configuring the kernel.
19
20For more information on the PQI Queuing Interface, please see:
21
22- http://www.t10.org/drafts.htm
23- http://www.t10.org/members/w_pqi2.htm
24
25Supported devices
26=================
27<Controller names to be added as they become publicly available.>
28
29smartpqi specific entries in /sys
30=================================
31
32smartpqi host attributes
33------------------------
34  - /sys/class/scsi_host/host*/rescan
35  - /sys/class/scsi_host/host*/driver_version
36
37  The host rescan attribute is a write only attribute. Writing to this
38  attribute will trigger the driver to scan for new, changed, or removed
39  devices and notify the SCSI mid-layer of any changes detected.
40
41  The version attribute is read-only and will return the driver version
42  and the controller firmware version.
43  For example::
44
45              driver: 0.9.13-370
46              firmware: 0.01-522
47
48smartpqi sas device attributes
49------------------------------
50  HBA devices are added to the SAS transport layer. These attributes are
51  automatically added by the SAS transport layer.
52
53  /sys/class/sas_device/end_device-X:X/sas_address
54  /sys/class/sas_device/end_device-X:X/enclosure_identifier
55  /sys/class/sas_device/end_device-X:X/scsi_target_id
56
57smartpqi specific ioctls
58========================
59
60  For compatibility with applications written for the cciss protocol.
61
62  CCISS_DEREGDISK, CCISS_REGNEWDISK, CCISS_REGNEWD
63	The above three ioctls all do exactly the same thing, which is to cause the driver
64	to rescan for new devices.  This does exactly the same thing as writing to the
65	smartpqi specific host "rescan" attribute.
66
67  CCISS_GETPCIINFO
68	Returns PCI domain, bus, device and function and "board ID" (PCI subsystem ID).
69
70  CCISS_GETDRIVVER
71	Returns driver version in three bytes encoded as::
72
73	  (DRIVER_MAJOR << 28) | (DRIVER_MINOR << 24) | (DRIVER_RELEASE << 16) | DRIVER_REVISION;
74
75  CCISS_PASSTHRU
76	Allows "BMIC" and "CISS" commands to be passed through to the Smart Storage Array.
77	These are used extensively by the SSA Array Configuration Utility, SNMP storage
78	agents, etc.
79