1Release Date : Sat. Aug 31, 2013 17:00:00 PST 2013 - 2 (emaild-id:megaraidlinux@lsi.com) 3 Adam Radford 4 Kashyap Desai 5 Sumit Saxena 6Current Version : 06.700.06.00-rc1 7Old Version : 06.600.18.00-rc1 8 1. Add High Availability clustering support using shared Logical Disks. 9 2. Version and Changelog update. 10------------------------------------------------------------------------------- 11Release Date : Wed. May 15, 2013 17:00:00 PST 2013 - 12 (emaild-id:megaraidlinux@lsi.com) 13 Adam Radford 14 Kashyap Desai 15 Sumit Saxena 16Current Version : 06.600.18.00-rc1 17Old Version : 06.506.00.00-rc1 18 1. Return DID_ERROR for scsi io, when controller is in critical h/w error. 19 2. Fix the interrupt mask for Gen2 controller. 20 3. Update balance count in driver to be in sync of firmware. 21 4. Free event detail memory without device ID check. 22 5. Set IO request timeout value provided by OS timeout for Tape devices. 23 6. Add support for MegaRAID Fury (device ID-0x005f) 12Gb/s controllers. 24 7. Add support to display Customer branding details in syslog. 25 8. Set IoFlags to enable Fast Path for JBODs for Invader/Fury(12 Gb/s) 26 controllers. 27 9. Add support for Extended MSI-x vectors for Invader and Fury(12Gb/s 28 HBA). 29 10.Add support for Uneven Span PRL11. 30 11.Add support to differentiate between iMR and MR Firmware. 31 12.Version and Changelog update. 32------------------------------------------------------------------------------- 33Release Date : Sat. Feb 9, 2013 17:00:00 PST 2013 - 34 (emaild-id:megaraidlinux@lsi.com) 35 Adam Radford 36Current Version : 06.506.00.00-rc1 37Old Version : 06.504.01.00-rc1 38 1. Add 4k FastPath DIF support. 39 2. Dont load DevHandle unless FastPath enabled. 40 3. Version and Changelog update. 41------------------------------------------------------------------------------- 42Release Date : Mon. Oct 1, 2012 17:00:00 PST 2012 - 43 (emaild-id:megaraidlinux@lsi.com) 44 Adam Radford 45Current Version : 06.504.01.00-rc1 46Old Version : 00.00.06.18-rc1 47 1. Removed un-needed completion_lock spinlock calls. 48 2. Add module param for configurable MSI-X vector count. 49 3. Load io_request DataLength in bytes. 50 4. Add array boundary check for SystemPD. 51 5. Add SystemPD FastPath support. 52 6. Remove duplicate code. 53 7. Version, Changelog, Copyright update. 54------------------------------------------------------------------------------- 55Release Date : Tue. Jun 17, 2012 17:00:00 PST 2012 - 56 (emaild-id:megaraidlinux@lsi.com) 57 Adam Radford/Kashyap Desai 58Current Version : 00.00.06.18-rc1 59Old Version : 00.00.06.15-rc1 60 1. Fix Copyright dates. 61 2. Add throttlequeuedepth module parameter. 62 3. Add resetwaittime module parameter. 63 4. Move poll_aen_lock initializer. 64------------------------------------------------------------------------------- 65Release Date : Mon. Mar 19, 2012 17:00:00 PST 2012 - 66 (emaild-id:megaraidlinux@lsi.com) 67 Adam Radford 68Current Version : 00.00.06.15-rc1 69Old Version : 00.00.06.14-rc1 70 1. Optimize HostMSIxVectors setting. 71 2. Add fpRead/WriteCapable, fpRead/WriteAcrossStripe checks. 72------------------------------------------------------------------------------- 73Release Date : Fri. Jan 6, 2012 17:00:00 PST 2010 - 74 (emaild-id:megaraidlinux@lsi.com) 75 Adam Radford 76Current Version : 00.00.06.14-rc1 77Old Version : 00.00.06.12-rc1 78 1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380. 79 2. Mask off flags in ioctl path to prevent memory scribble with older 80 MegaCLI versions. 81 3. Remove poll_mode_io module paramater, sysfs node, and associated code. 82------------------------------------------------------------------------------- 83Release Date : Wed. Oct 5, 2011 17:00:00 PST 2010 - 84 (emaild-id:megaraidlinux@lsi.com) 85 Adam Radford 86Current Version : 00.00.06.12-rc1 87Old Version : 00.00.05.40-rc1 88 1. Continue booting immediately if FW in FAULT at driver load time. 89 2. Increase default cmds per lun to 256. 90 3. Fix mismatch in megasas_reset_fusion() mutex lock-unlock. 91 4. Remove some un-necessary code. 92 5. Clear state change interrupts for Fusion/Invader. 93 6. Clear FUSION_IN_RESET before enabling interrupts. 94 7. Add support for MegaRAID 9360/9380 12GB/s controllers. 95 8. Add multiple MSI-X vector/multiple reply queue support. 96 9. Add driver workaround for PERC5/1068 kdump kernel panic. 97------------------------------------------------------------------------------- 98Release Date : Tue. Jul 26, 2011 17:00:00 PST 2010 - 99 (emaild-id:megaraidlinux@lsi.com) 100 Adam Radford 101Current Version : 00.00.05.40-rc1 102Old Version : 00.00.05.38-rc1 103 1. Fix FastPath I/O to work with degraded RAID 1. 104 2. Add .change_queue_depth support. 105------------------------------------------------------------------------------- 106Release Date : Wed. May 11, 2011 17:00:00 PST 2010 - 107 (emaild-id:megaraidlinux@lsi.com) 108 Adam Radford 109Current Version : 00.00.05.38-rc1 110Old Version : 00.00.05.34-rc1 111 1. Remove MSI-X black list, use MFI_REG_STATE.ready.msiEnable. 112 2. Remove un-used function megasas_return_cmd_for_smid(). 113 3. Check MFI_REG_STATE.fault.resetAdapter in megasas_reset_fusion(). 114 4. Disable interrupts/free_irq() in megasas_shutdown(). 115 5. Fix bug where AENs could be lost in probe() and resume(). 116 6. Convert 6,10,12 byte CDB's to 16 byte CDB for large LBA's for FastPath 117 IO. 118 7. Add 1078 OCR support. 119------------------------------------------------------------------------------- 120Release Date : Thu. Feb 24, 2011 17:00:00 PST 2010 - 121 (emaild-id:megaraidlinux@lsi.com) 122 Adam Radford 123Current Version : 00.00.05.34-rc1 124Old Version : 00.00.05.29-rc1 125 1. Fix some failure gotos from megasas_probe_one(), etc. 126 2. Add missing check_and_restore_queue_depth() call in 127 complete_cmd_fusion(). 128 3. Enable MSI-X before calling megasas_init_fw(). 129 4. Call tasklet_schedule() even if outbound_intr_status == 0 for MFI based 130 boards in MSI-X mode. 131 5. Fix megasas_probe_one() to clear PCI_MSIX_FLAGS_ENABLE in msi control 132 register in kdump kernel. 133 6. Fix megasas_get_cmd() to only print "Command pool empty" if 134 megasas_dbg_lvl is set. 135 7. Fix megasas_build_dcdb_fusion() to not filter by TYPE_DISK. 136 8. Fix megasas_build_dcdb_fusion() to use io_request->LUN[1] field. 137 9. Add MR_EVT_CFG_CLEARED to megasas_aen_polling(). 138 10. Fix tasklet_init() in megasas_init_fw() to use instancet->tasklet. 139 11. Fix fault state handling in megasas_transition_to_ready(). 140 12. Fix max_sectors setting for IEEE SGL's. 141 13. Fix iMR OCR support to work correctly. 142------------------------------------------------------------------------------- 143Release Date : Tues. Dec 14, 2010 17:00:00 PST 2010 - 144 (emaild-id:megaraidlinux@lsi.com) 145 Adam Radford 146Current Version : 00.00.05.29-rc1 147Old Version : 00.00.04.31-rc1 148 1. Rename megaraid_sas.c to megaraid_sas_base.c. 149 2. Update GPL headers. 150 3. Add MSI-X support and 'msix_disable' module parameter. 151 4. Use lowest memory bar (for SR-IOV VF support). 152 5. Add struct megasas_instance_temlate changes, and change all code to use 153 new instance entries: 154 155 irqreturn_t (*service_isr )(int irq, void *devp); 156 void (*tasklet)(unsigned long); 157 u32 (*init_adapter)(struct megasas_instance *); 158 u32 (*build_and_issue_cmd) (struct megasas_instance *, 159 struct scsi_cmnd *); 160 void (*issue_dcmd) (struct megasas_instance *instance, 161 struct megasas_cmd *cmd); 162 163 6. Add code to support MegaRAID 9265/9285 controllers device id (0x5b). 164------------------------------------------------------------------------------- 1651 Release Date : Thur. May 03, 2010 09:12:45 PST 2009 - 166 (emaild-id:megaraidlinux@lsi.com) 167 Bo Yang 168 1692 Current Version : 00.00.04.31-rc1 1703 Older Version : 00.00.04.17.1-rc1 171 1721. Add the Online Controller Reset (OCR) to the Driver. 173 OCR is the new feature for megaraid_sas driver which 174 will allow the fw to do the chip reset which will not 175 affact the OS behavious. 176 177 To add the OCR support, driver need to do: 178 a). reset the controller chips -- Xscale and Gen2 which 179 will change the function calls and add the reset function 180 related to this two chips. 181 182 b). during the reset, driver will store the pending cmds 183 which not returned by FW to driver's pending queue. Driver 184 will re-issue those pending cmds again to FW after the OCR 185 finished. 186 187 c). In driver's timeout routine, driver will report to 188 OS as reset. Also driver's queue routine will block the 189 cmds until the OCR finished. 190 191 d). in Driver's ISR routine, if driver get the FW state as 192 state change, FW in Failure status and FW support online controller 193 reset (OCR), driver will start to do the controller reset. 194 195 e). In driver's IOCTL routine, the application cmds will wait for the 196 OCR to finish, then issue the cmds to FW. 197 198 f). Before driver kill adapter, driver will do last chance of 199 OCR to see if driver can bring back the FW. 200 2012. Add the support update flag to the driver to tell LSI megaraid_sas 202 application which driver will support the device update. So application 203 will not need to do the device update after application add/del the device 204 from the system. 2053. In driver's timeout routine, driver will do three time reset if fw is in 206 failed state. Driver will kill adapter if can't bring back FW after the 207 this three times reset. 2084. Add the input parameter max_sectors to 1MB support to our GEN2 controller. 209 customer can use the input paramenter max_sectors to add 1MB support to GEN2 210 controller. 211 2121 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 - 213 (emaild-id:megaraidlinux@lsi.com) 214 Bo Yang 215 2162 Current Version : 00.00.04.17.1-rc1 2173 Older Version : 00.00.04.12 218 2191. Add the pad_0 in mfi frame structure to 0 to fix the 220 context value larger than 32bit value issue. 221 2222. Add the logic drive list to the driver. Driver will 223 keep the logic drive list internal after driver load. 224 2253. driver fixed the device update issue after get the AEN 226 PD delete/ADD, LD add/delete from FW. 227 2281 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 - 229 (emaild-id:megaraidlinux@lsi.com) 230 Bo Yang 231 2322 Current Version : 00.00.04.12 2333 Older Version : 00.00.04.10 234 2351. Change the AEN sys PD update from scsi_scan to 236 scsi_add_device and scsi_remove_device. 2372. Takeoff the debug print-out in aen_polling routine. 238 2391 Release Date : Thur. July 02, 2009 10:12:45 PST 2009 - 240 (emaild-id:megaraidlinux@lsi.com) 241 Bo Yang 242 2432 Current Version : 00.00.04.10 2443 Older Version : 00.00.04.08 245 2461. Add the 3 mins timeout during the controller initialize. 2472. Add the fix for 64bit sense date errors. 248 2491 Release Date : Tues. May 05, 2009 10:12:45 PST 2009 - 250 (emaild-id:megaraidlinux@lsi.com) 251 Bo Yang 252 2532 Current Version : 00.00.04.08 2543 Older Version : 00.00.04.06 255 2561. Add the fix of pending in FW after deleted the logic drives. 2572. Add the fix of deallocating memory after get pdlist. 258 2591 Release Date : Tues. March 26, 2009 10:12:45 PST 2009 - 260 (emaild-id:megaraidlinux@lsi.com) 261 Bo Yang 262 2632 Current Version : 00.00.04.06 2643 Older Version : 00.00.04.04 265 2661. Add the fix of the driver cmd empty fix of the driver cmd empty. 2672. Add the fix of the driver MSM AEN CMD cause the system slow. 268 2691 Release Date : Tues. March 03, 2009 10:12:45 PST 2009 - 270 (emaild-id:megaraidlinux@lsi.com) 271 Bo Yang 272 2732 Current Version : 00.00.04.04 2743 Older Version : 00.00.04.01 275 2761. Add the Tape drive fix to the driver: If the command is for 277 the tape device, set the pthru timeout to the os layer timeout value. 278 2792. Add Poll_wait mechanism to Gen-2 Linux driv. 280 In the aen handler, driver needs to wakeup poll handler similar to 281 the way it raises SIGIO. 282 2833. Add new controller new SAS2 support to the driver. 284 2854. Report the unconfigured PD (system PD) to OS. 286 2875. Add the IEEE SGL support to the driver 288 2896. Reasign the Application cmds to SAS2 controller 290 2911 Release Date : Thur.July. 24 11:41:51 PST 2008 - 292 (emaild-id:megaraidlinux@lsi.com) 293 Sumant Patro 294 Bo Yang 295 2962 Current Version : 00.00.04.01 2973 Older Version : 00.00.03.22 298 2991. Add the new controller (0078, 0079) support to the driver 300 Those controllers are LSI's next generatation(gen2) SAS controllers. 301 3021 Release Date : Mon.June. 23 10:12:45 PST 2008 - 303 (emaild-id:megaraidlinux@lsi.com) 304 Sumant Patro 305 Bo Yang 306 3072 Current Version : 00.00.03.22 3083 Older Version : 00.00.03.20 309 3101. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper. 3112. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue. 312 3131 Release Date : Mon. March 10 11:02:31 PDT 2008 - 314 (emaild-id:megaraidlinux@lsi.com) 315 Sumant Patro 316 Bo Yang 317 3182 Current Version : 00.00.03.20-RC1 3193 Older Version : 00.00.03.16 320 3211. Rollback the sense info implementation 322 Sense buffer ptr data type in the ioctl path is reverted back 323 to u32 * as in previous versions of driver. 324 3252. Fixed the driver frame count. 326 When Driver sent wrong frame count to firmware. As this 327 particular command is sent to drive, FW is seeing continuous 328 chip resets and so the command will timeout. 329 3303. Add the new controller(1078DE) support to the driver 331 and Increase the max_wait to 60 from 10 in the controller 332 operational status. With this max_wait increase, driver will 333 make sure the FW will finish the pending cmd for KDUMP case. 334 3351 Release Date : Thur. Nov. 07 16:30:43 PST 2007 - 336 (emaild-id:megaraidlinux@lsi.com) 337 Sumant Patro 338 Bo Yang 339 3402 Current Version : 00.00.03.16 3413 Older Version : 00.00.03.15 342 3431. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take 344 a max of 60 seconds to respond to the INIT cmd. 345 3461 Release Date : Fri. Sep. 07 16:30:43 PST 2007 - 347 (emaild-id:megaraidlinux@lsi.com) 348 Sumant Patro 349 Bo Yang 350 3512 Current Version : 00.00.03.15 3523 Older Version : 00.00.03.14 353 3541. Added module parameter "poll_mode_io" to support for "polling" 355 (reduced interrupt operation). In this mode, IO completion 356 interrupts are delayed. At the end of initiating IOs, the 357 driver schedules for cmd completion if there are pending cmds 358 to be completed. A timer-based interrupt has also been added 359 to prevent IO completion processing from being delayed 360 indefinitely in the case that no new IOs are initiated. 361 3621 Release Date : Fri. Sep. 07 16:30:43 PST 2007 - 363 (emaild-id:megaraidlinux@lsi.com) 364 Sumant Patro 365 Bo Yang 366 3672 Current Version : 00.00.03.14 3683 Older Version : 00.00.03.13 369 3701. Setting the max_sectors_per_req based on max SGL supported by the 371 FW. Prior versions calculated this value from controller info 372 (max_sectors_1, max_sectors_2). For certain controllers/FW, 373 this was resulting in a value greater than max SGL supported 374 by the FW. Issue was first reported by users running LUKS+XFS 375 with megaraid_sas. Thanks to RB for providing the logs and 376 duplication steps that helped to get to the root cause of the 377 issue. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 378 10. FW may take a max of 60 seconds to respond to the INIT 379 cmd. 380 3811 Release Date : Fri. June. 15 16:30:43 PST 2007 - 382 (emaild-id:megaraidlinux@lsi.com) 383 Sumant Patro 384 Bo Yang 385 3862 Current Version : 00.00.03.13 3873 Older Version : 00.00.03.12 388 3891. Added the megasas_reset_timer routine to intercept cmd timeout and throttle io. 390 391On Fri, 2007-03-16 at 16:44 -0600, James Bottomley wrote: 392It looks like megaraid_sas at least needs this to throttle its commands 393> as they begin to time out. The code keeps the existing transport 394> template use of eh_timed_out (and allows the transport to override the 395> host if they both have this callback). 396> 397> James 398 3991 Release Date : Sat May. 12 16:30:43 PST 2007 - 400 (emaild-id:megaraidlinux@lsi.com) 401 Sumant Patro 402 Bo Yang 403 4042 Current Version : 00.00.03.12 4053 Older Version : 00.00.03.11 406 4071. When MegaSAS driver receives reset call from OS, driver waits in reset 408routine for max 3 minutes for all pending command completion. Now driver will 409call completion routine every 5 seconds from the reset routine instead of 410waiting for depending on cmd completion from isr path. 411 4121 Release Date : Mon Apr. 30 10:25:52 PST 2007 - 413 (emaild-id:megaraidlinux@lsi.com) 414 Sumant Patro 415 Bo Yang 416 4172 Current Version : 00.00.03.11 4183 Older Version : 00.00.03.09 419 420 1. Memory Manager for IOCTL removed for 2.6 kernels. 421 pci_alloc_consistent replaced by dma_alloc_coherent. With this 422 change there is no need of memory manager in the driver code 423 424 On Wed, 2007-02-07 at 13:30 -0800, Andrew Morton wrote: 425 > I suspect all this horror is due to stupidity in the DMA API. 426 > 427 > pci_alloc_consistent() just goes and assumes GFP_ATOMIC, whereas 428 > the caller (megasas_mgmt_fw_ioctl) would have been perfectly happy 429 > to use GFP_KERNEL. 430 > 431 > I bet this fixes it 432 433 It does, but the DMA API was expanded to cope with this exact case, so 434 use dma_alloc_coherent() directly in the megaraid code instead. The dev 435 is just &pci_dev->dev. 436 437 James <James.Bottomley@SteelEye.com> 438 439 3. SYNCHRONIZE_CACHE is not supported by FW and thus blocked by driver. 440 4. Hibernation support added 441 5. Performing diskdump while running IO in RHEL 4 was failing. Fixed. 442 4431 Release Date : Fri Feb. 09 14:36:28 PST 2007 - 444 (emaild-id:megaraidlinux@lsi.com) 445 Sumant Patro 446 Bo Yang 447 4482 Current Version : 00.00.03.09 4493 Older Version : 00.00.03.08 450 451i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors 452 453 The driver now waits for 10 seconds to elapse instead of 5 (as in 454 previous release) to resume IO. 455 4561 Release Date : Mon Feb. 05 11:35:24 PST 2007 - 457 (emaild-id:megaraidlinux@lsi.com) 458 Sumant Patro 459 Bo Yang 4602 Current Version : 00.00.03.08 4613 Older Version : 00.00.03.07 462 463i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors 464 465 Fix: The driver is now throttling IO. 466 Checks added in megasas_queue_command to know if FW is able to 467 process commands within timeout period. If number of retries 468 is 2 or greater,the driver stops sending cmd to FW temporarily. IO is 469 resumed if pending cmd count reduces to 16 or 5 seconds has elapsed 470 from the time cmds were last sent to FW. 471 472ii. FW enables WCE bit in Mode Sense cmd for drives that are configured 473 as WriteBack. The OS may send "SYNCHRONIZE_CACHE" cmd when Logical 474 Disks are exposed with WCE=1. User is advised to enable Write Back 475 mode only when the controller has battery backup. At this time 476 Synhronize cache is not supported by the FW. Driver will short-cycle 477 the cmd and return success without sending down to FW. 478 4791 Release Date : Sun Jan. 14 11:21:32 PDT 2007 - 480 Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang 4812 Current Version : 00.00.03.07 4823 Older Version : 00.00.03.06 483 484i. bios_param entry added in scsi_host_template that returns disk geometry 485 information. 486 4871 Release Date : Fri Oct 20 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang 4882 Current Version : 00.00.03.06 4893 Older Version : 00.00.03.05 490 4911. Added new memory management module to support the IOCTL memory allocation. For IOCTL we try to allocate from the memory pool created during driver initialization. If mem pool is empty then we allocate at run time. 4922. Added check in megasas_queue_command and dpc/isr routine to see if we have already declared adapter dead 493 (hw_crit_error=1). If hw_crit_error==1, now we donot accept any processing of pending cmds/accept any cmd from OS 494 4951 Release Date : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> 4962 Current Version : 00.00.03.05 4973 Older Version : 00.00.03.04 498 499i. PCI_DEVICE macro used 500 501 Convert the pci_device_id-table of the megaraid_sas-driver to the PCI_DEVICE-macro, to safe some lines. 502 503 - Henrik Kretzschmar <henne@nachtwindheim.de> 504ii. All compiler warnings removed 505iii. megasas_ctrl_info struct reverted to 3.02 release 506iv. Default value of megasas_dbg_lvl set to 0 507v. Removing in megasas_exit the sysfs entry created for megasas_dbg_lvl 508vi. In megasas_teardown_frame_pool(), cmd->frame was passed instead of 509 cmd->sense to pci_pool_free. Fixed. Bug was pointed out by 510 Eric Sesterhenn 511 5121 Release Date : Wed Sep 13 14:22:51 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5132 Current Version : 00.00.03.04 5143 Older Version : 00.00.03.03 515 516i. Added Reboot notify 517ii. Reduced by 1 max cmds sent to FW from Driver to make the reply_q_sz same 518 as Max Cmds FW can support 519 5201 Release Date : Tue Aug 22 16:33:14 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5212 Current Version : 00.00.03.03 5223 Older Version : 00.00.03.02 523 524i. Send stop adapter to FW & Dump pending FW cmds before declaring adapter dead. 525 New varible added to set dbg level. 526ii. Disable interrupt made as fn pointer as they are different for 1068 / 1078 527iii. Frame count optimization. Main frame can contain 2 SGE for 64 bit SGLs and 528 3 SGE for 32 bit SGL 529iv. Tasklet added for cmd completion 530v. If FW in operational state before firing INIT, now we send RESET Flag to FW instead of just READY. This is used to do soft reset. 531vi. megasas_ctrl_prop structure updated (based on FW struct) 532vii. Added print : FW now in Ready State during initialization 533 5341 Release Date : Sun Aug 06 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5352 Current Version : 00.00.03.02 5363 Older Version : 00.00.03.01 537 538i. Added FW tranistion state for Hotplug scenario 539 5401 Release Date : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5412 Current Version : 00.00.03.01 5423 Older Version : 00.00.02.04 543 544i. Added support for ZCR controller. 545 546 New device id 0x413 added. 547 548ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW. 549 550 Interrupt is enabled after required initialization is over. 551 This is done to ensure that driver is ready to handle interrupts when 552 it is generated by the controller. 553 554 -Sumant Patro <Sumant.Patro@lsil.com> 555 5561 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5572 Current Version : 00.00.02.04 5583 Older Version : 00.00.02.04 559 560i. Remove superflous instance_lock 561 562 gets rid of the otherwise superflous instance_lock and avoids an unsave 563 unsynchronized access in the error handler. 564 565 - Christoph Hellwig <hch@lst.de> 566 567 5681 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5692 Current Version : 00.00.02.04 5703 Older Version : 00.00.02.04 571 572i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added. 573 During initialization, depending on the device id, the template members 574 are initialized with function pointers specific to the ppc or 575 xscale controllers. 576 577 -Sumant Patro <Sumant.Patro@lsil.com> 578 5791 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro 580 <Sumant.Patro@lsil.com> 5812 Current Version : 00.00.02.04 5823 Older Version : 00.00.02.02 583i. Register 16 byte CDB capability with scsi midlayer 584 585 "This patch properly registers the 16 byte command length capability of the 586 megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas 587 hardware supports 16 byte CDB's." 588 589 -Joshua Giles <joshua_giles@dell.com> 590 5911 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5922 Current Version : 00.00.02.02 5933 Older Version : 00.00.02.01 594 595i. New template defined to represent each family of controllers (identified by processor used). 596 The template will have defintions that will be initialised to appropritae values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set. 597 598 -Sumant Patro <Sumant.Patro@lsil.com> 599 6001 Release Date : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com> 6012 Current Version : 00.00.02.00-rc4 6023 Older Version : 00.00.02.01 603 604i. Code reorganized to remove code duplication in megasas_build_cmd. 605 606 "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepathes and merge the reminder of megasas_build_cmd into megasas_queue_command" 607 608 - Christoph Hellwig <hch@lst.de> 609 610ii. Defined MEGASAS_IOC_FIRMWARE32 for code paths that handles 32 bit applications in 64 bit systems. 611 612 "MEGASAS_IOC_FIRMWARE can't be redefined if CONFIG_COMPAT is set, we need to define a MEGASAS_IOC_FIRMWARE32 define so native binaries continue to work" 613 614 - Christoph Hellwig <hch@lst.de> 615