1=============================
2Linux 2.6.x on MPC52xx family
3=============================
4
5For the latest info, go to http://www.246tNt.com/mpc52xx/
6
7To compile/use :
8
9  - U-Boot::
10
11     # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
12        if you wish to ).
13     # make lite5200_defconfig
14     # make uImage
15
16     then, on U-boot:
17     => tftpboot 200000 uImage
18     => tftpboot 400000 pRamdisk
19     => bootm 200000 400000
20
21  - DBug::
22
23     # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
24        if you wish to ).
25     # make lite5200_defconfig
26     # cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz
27     # make zImage.initrd
28     # make
29
30     then in DBug:
31     DBug> dn -i zImage.initrd.lite5200
32
33
34Some remarks:
35
36 - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100
37   is not supported, and I'm not sure anyone is interesting in working on it
38   so. I didn't took 5xxx because there's apparently a lot of 5xxx that have
39   nothing to do with the MPC5200. I also included the 'MPC' for the same
40   reason.
41 - Of course, I inspired myself from the 2.4 port. If you think I forgot to
42   mention you/your company in the copyright of some code, I'll correct it
43   ASAP.
44