1============================= 2Netlink interface for ethtool 3============================= 4 5 6Basic information 7================= 8 9Netlink interface for ethtool uses generic netlink family ``ethtool`` 10(userspace application should use macros ``ETHTOOL_GENL_NAME`` and 11``ETHTOOL_GENL_VERSION`` defined in ``<linux/ethtool_netlink.h>`` uapi 12header). This family does not use a specific header, all information in 13requests and replies is passed using netlink attributes. 14 15The ethtool netlink interface uses extended ACK for error and warning 16reporting, userspace application developers are encouraged to make these 17messages available to user in a suitable way. 18 19Requests can be divided into three categories: "get" (retrieving information), 20"set" (setting parameters) and "action" (invoking an action). 21 22All "set" and "action" type requests require admin privileges 23(``CAP_NET_ADMIN`` in the namespace). Most "get" type requests are allowed for 24anyone but there are exceptions (where the response contains sensitive 25information). In some cases, the request as such is allowed for anyone but 26unprivileged users have attributes with sensitive information (e.g. 27wake-on-lan password) omitted. 28 29 30Conventions 31=========== 32 33Attributes which represent a boolean value usually use NLA_U8 type so that we 34can distinguish three states: "on", "off" and "not present" (meaning the 35information is not available in "get" requests or value is not to be changed 36in "set" requests). For these attributes, the "true" value should be passed as 37number 1 but any non-zero value should be understood as "true" by recipient. 38In the tables below, "bool" denotes NLA_U8 attributes interpreted in this way. 39 40In the message structure descriptions below, if an attribute name is suffixed 41with "+", parent nest can contain multiple attributes of the same type. This 42implements an array of entries. 43 44Attributes that need to be filled-in by device drivers and that are dumped to 45user space based on whether they are valid or not should not use zero as a 46valid value. This avoids the need to explicitly signal the validity of the 47attribute in the device driver API. 48 49 50Request header 51============== 52 53Each request or reply message contains a nested attribute with common header. 54Structure of this header is 55 56 ============================== ====== ============================= 57 ``ETHTOOL_A_HEADER_DEV_INDEX`` u32 device ifindex 58 ``ETHTOOL_A_HEADER_DEV_NAME`` string device name 59 ``ETHTOOL_A_HEADER_FLAGS`` u32 flags common for all requests 60 ============================== ====== ============================= 61 62``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the 63device message relates to. One of them is sufficient in requests, if both are 64used, they must identify the same device. Some requests, e.g. global string 65sets, do not require device identification. Most ``GET`` requests also allow 66dump requests without device identification to query the same information for 67all devices providing it (each device in a separate message). 68 69``ETHTOOL_A_HEADER_FLAGS`` is a bitmap of request flags common for all request 70types. The interpretation of these flags is the same for all request types but 71the flags may not apply to requests. Recognized flags are: 72 73 ================================= =================================== 74 ``ETHTOOL_FLAG_COMPACT_BITSETS`` use compact format bitsets in reply 75 ``ETHTOOL_FLAG_OMIT_REPLY`` omit optional reply (_SET and _ACT) 76 ``ETHTOOL_FLAG_STATS`` include optional device statistics 77 ================================= =================================== 78 79New request flags should follow the general idea that if the flag is not set, 80the behaviour is backward compatible, i.e. requests from old clients not aware 81of the flag should be interpreted the way the client expects. A client must 82not set flags it does not understand. 83 84 85Bit sets 86======== 87 88For short bitmaps of (reasonably) fixed length, standard ``NLA_BITFIELD32`` 89type is used. For arbitrary length bitmaps, ethtool netlink uses a nested 90attribute with contents of one of two forms: compact (two binary bitmaps 91representing bit values and mask of affected bits) and bit-by-bit (list of 92bits identified by either index or name). 93 94Verbose (bit-by-bit) bitsets allow sending symbolic names for bits together 95with their values which saves a round trip (when the bitset is passed in a 96request) or at least a second request (when the bitset is in a reply). This is 97useful for one shot applications like traditional ethtool command. On the 98other hand, long running applications like ethtool monitor (displaying 99notifications) or network management daemons may prefer fetching the names 100only once and using compact form to save message size. Notifications from 101ethtool netlink interface always use compact form for bitsets. 102 103A bitset can represent either a value/mask pair (``ETHTOOL_A_BITSET_NOMASK`` 104not set) or a single bitmap (``ETHTOOL_A_BITSET_NOMASK`` set). In requests 105modifying a bitmap, the former changes the bit set in mask to values set in 106value and preserves the rest; the latter sets the bits set in the bitmap and 107clears the rest. 108 109Compact form: nested (bitset) attribute contents: 110 111 ============================ ====== ============================ 112 ``ETHTOOL_A_BITSET_NOMASK`` flag no mask, only a list 113 ``ETHTOOL_A_BITSET_SIZE`` u32 number of significant bits 114 ``ETHTOOL_A_BITSET_VALUE`` binary bitmap of bit values 115 ``ETHTOOL_A_BITSET_MASK`` binary bitmap of valid bits 116 ============================ ====== ============================ 117 118Value and mask must have length at least ``ETHTOOL_A_BITSET_SIZE`` bits 119rounded up to a multiple of 32 bits. They consist of 32-bit words in host byte 120order, words ordered from least significant to most significant (i.e. the same 121way as bitmaps are passed with ioctl interface). 122 123For compact form, ``ETHTOOL_A_BITSET_SIZE`` and ``ETHTOOL_A_BITSET_VALUE`` are 124mandatory. ``ETHTOOL_A_BITSET_MASK`` attribute is mandatory if 125``ETHTOOL_A_BITSET_NOMASK`` is not set (bitset represents a value/mask pair); 126if ``ETHTOOL_A_BITSET_NOMASK`` is not set, ``ETHTOOL_A_BITSET_MASK`` is not 127allowed (bitset represents a single bitmap. 128 129Kernel bit set length may differ from userspace length if older application is 130used on newer kernel or vice versa. If userspace bitmap is longer, an error is 131issued only if the request actually tries to set values of some bits not 132recognized by kernel. 133 134Bit-by-bit form: nested (bitset) attribute contents: 135 136 +------------------------------------+--------+-----------------------------+ 137 | ``ETHTOOL_A_BITSET_NOMASK`` | flag | no mask, only a list | 138 +------------------------------------+--------+-----------------------------+ 139 | ``ETHTOOL_A_BITSET_SIZE`` | u32 | number of significant bits | 140 +------------------------------------+--------+-----------------------------+ 141 | ``ETHTOOL_A_BITSET_BITS`` | nested | array of bits | 142 +-+----------------------------------+--------+-----------------------------+ 143 | | ``ETHTOOL_A_BITSET_BITS_BIT+`` | nested | one bit | 144 +-+-+--------------------------------+--------+-----------------------------+ 145 | | | ``ETHTOOL_A_BITSET_BIT_INDEX`` | u32 | bit index (0 for LSB) | 146 +-+-+--------------------------------+--------+-----------------------------+ 147 | | | ``ETHTOOL_A_BITSET_BIT_NAME`` | string | bit name | 148 +-+-+--------------------------------+--------+-----------------------------+ 149 | | | ``ETHTOOL_A_BITSET_BIT_VALUE`` | flag | present if bit is set | 150 +-+-+--------------------------------+--------+-----------------------------+ 151 152Bit size is optional for bit-by-bit form. ``ETHTOOL_A_BITSET_BITS`` nest can 153only contain ``ETHTOOL_A_BITSET_BITS_BIT`` attributes but there can be an 154arbitrary number of them. A bit may be identified by its index or by its 155name. When used in requests, listed bits are set to 0 or 1 according to 156``ETHTOOL_A_BITSET_BIT_VALUE``, the rest is preserved. A request fails if 157index exceeds kernel bit length or if name is not recognized. 158 159When ``ETHTOOL_A_BITSET_NOMASK`` flag is present, bitset is interpreted as 160a simple bitmap. ``ETHTOOL_A_BITSET_BIT_VALUE`` attributes are not used in 161such case. Such bitset represents a bitmap with listed bits set and the rest 162zero. 163 164In requests, application can use either form. Form used by kernel in reply is 165determined by ``ETHTOOL_FLAG_COMPACT_BITSETS`` flag in flags field of request 166header. Semantics of value and mask depends on the attribute. 167 168 169List of message types 170===================== 171 172All constants identifying message types use ``ETHTOOL_CMD_`` prefix and suffix 173according to message purpose: 174 175 ============== ====================================== 176 ``_GET`` userspace request to retrieve data 177 ``_SET`` userspace request to set data 178 ``_ACT`` userspace request to perform an action 179 ``_GET_REPLY`` kernel reply to a ``GET`` request 180 ``_SET_REPLY`` kernel reply to a ``SET`` request 181 ``_ACT_REPLY`` kernel reply to an ``ACT`` request 182 ``_NTF`` kernel notification 183 ============== ====================================== 184 185Userspace to kernel: 186 187 ===================================== ================================= 188 ``ETHTOOL_MSG_STRSET_GET`` get string set 189 ``ETHTOOL_MSG_LINKINFO_GET`` get link settings 190 ``ETHTOOL_MSG_LINKINFO_SET`` set link settings 191 ``ETHTOOL_MSG_LINKMODES_GET`` get link modes info 192 ``ETHTOOL_MSG_LINKMODES_SET`` set link modes info 193 ``ETHTOOL_MSG_LINKSTATE_GET`` get link state 194 ``ETHTOOL_MSG_DEBUG_GET`` get debugging settings 195 ``ETHTOOL_MSG_DEBUG_SET`` set debugging settings 196 ``ETHTOOL_MSG_WOL_GET`` get wake-on-lan settings 197 ``ETHTOOL_MSG_WOL_SET`` set wake-on-lan settings 198 ``ETHTOOL_MSG_FEATURES_GET`` get device features 199 ``ETHTOOL_MSG_FEATURES_SET`` set device features 200 ``ETHTOOL_MSG_PRIVFLAGS_GET`` get private flags 201 ``ETHTOOL_MSG_PRIVFLAGS_SET`` set private flags 202 ``ETHTOOL_MSG_RINGS_GET`` get ring sizes 203 ``ETHTOOL_MSG_RINGS_SET`` set ring sizes 204 ``ETHTOOL_MSG_CHANNELS_GET`` get channel counts 205 ``ETHTOOL_MSG_CHANNELS_SET`` set channel counts 206 ``ETHTOOL_MSG_COALESCE_GET`` get coalescing parameters 207 ``ETHTOOL_MSG_COALESCE_SET`` set coalescing parameters 208 ``ETHTOOL_MSG_PAUSE_GET`` get pause parameters 209 ``ETHTOOL_MSG_PAUSE_SET`` set pause parameters 210 ``ETHTOOL_MSG_EEE_GET`` get EEE settings 211 ``ETHTOOL_MSG_EEE_SET`` set EEE settings 212 ``ETHTOOL_MSG_TSINFO_GET`` get timestamping info 213 ``ETHTOOL_MSG_CABLE_TEST_ACT`` action start cable test 214 ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` action start raw TDR cable test 215 ``ETHTOOL_MSG_TUNNEL_INFO_GET`` get tunnel offload info 216 ``ETHTOOL_MSG_FEC_GET`` get FEC settings 217 ``ETHTOOL_MSG_FEC_SET`` set FEC settings 218 ``ETHTOOL_MSG_MODULE_EEPROM_GET`` read SFP module EEPROM 219 ``ETHTOOL_MSG_STATS_GET`` get standard statistics 220 ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` get PHC virtual clocks info 221 ``ETHTOOL_MSG_MODULE_SET`` set transceiver module parameters 222 ``ETHTOOL_MSG_MODULE_GET`` get transceiver module parameters 223 ``ETHTOOL_MSG_PSE_SET`` set PSE parameters 224 ``ETHTOOL_MSG_PSE_GET`` get PSE parameters 225 ``ETHTOOL_MSG_RSS_GET`` get RSS settings 226 ``ETHTOOL_MSG_MM_GET`` get MAC merge layer state 227 ``ETHTOOL_MSG_MM_SET`` set MAC merge layer parameters 228 ===================================== ================================= 229 230Kernel to userspace: 231 232 ======================================== ================================= 233 ``ETHTOOL_MSG_STRSET_GET_REPLY`` string set contents 234 ``ETHTOOL_MSG_LINKINFO_GET_REPLY`` link settings 235 ``ETHTOOL_MSG_LINKINFO_NTF`` link settings notification 236 ``ETHTOOL_MSG_LINKMODES_GET_REPLY`` link modes info 237 ``ETHTOOL_MSG_LINKMODES_NTF`` link modes notification 238 ``ETHTOOL_MSG_LINKSTATE_GET_REPLY`` link state info 239 ``ETHTOOL_MSG_DEBUG_GET_REPLY`` debugging settings 240 ``ETHTOOL_MSG_DEBUG_NTF`` debugging settings notification 241 ``ETHTOOL_MSG_WOL_GET_REPLY`` wake-on-lan settings 242 ``ETHTOOL_MSG_WOL_NTF`` wake-on-lan settings notification 243 ``ETHTOOL_MSG_FEATURES_GET_REPLY`` device features 244 ``ETHTOOL_MSG_FEATURES_SET_REPLY`` optional reply to FEATURES_SET 245 ``ETHTOOL_MSG_FEATURES_NTF`` netdev features notification 246 ``ETHTOOL_MSG_PRIVFLAGS_GET_REPLY`` private flags 247 ``ETHTOOL_MSG_PRIVFLAGS_NTF`` private flags 248 ``ETHTOOL_MSG_RINGS_GET_REPLY`` ring sizes 249 ``ETHTOOL_MSG_RINGS_NTF`` ring sizes 250 ``ETHTOOL_MSG_CHANNELS_GET_REPLY`` channel counts 251 ``ETHTOOL_MSG_CHANNELS_NTF`` channel counts 252 ``ETHTOOL_MSG_COALESCE_GET_REPLY`` coalescing parameters 253 ``ETHTOOL_MSG_COALESCE_NTF`` coalescing parameters 254 ``ETHTOOL_MSG_PAUSE_GET_REPLY`` pause parameters 255 ``ETHTOOL_MSG_PAUSE_NTF`` pause parameters 256 ``ETHTOOL_MSG_EEE_GET_REPLY`` EEE settings 257 ``ETHTOOL_MSG_EEE_NTF`` EEE settings 258 ``ETHTOOL_MSG_TSINFO_GET_REPLY`` timestamping info 259 ``ETHTOOL_MSG_CABLE_TEST_NTF`` Cable test results 260 ``ETHTOOL_MSG_CABLE_TEST_TDR_NTF`` Cable test TDR results 261 ``ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`` tunnel offload info 262 ``ETHTOOL_MSG_FEC_GET_REPLY`` FEC settings 263 ``ETHTOOL_MSG_FEC_NTF`` FEC settings 264 ``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY`` read SFP module EEPROM 265 ``ETHTOOL_MSG_STATS_GET_REPLY`` standard statistics 266 ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`` PHC virtual clocks info 267 ``ETHTOOL_MSG_MODULE_GET_REPLY`` transceiver module parameters 268 ``ETHTOOL_MSG_PSE_GET_REPLY`` PSE parameters 269 ``ETHTOOL_MSG_RSS_GET_REPLY`` RSS settings 270 ``ETHTOOL_MSG_MM_GET_REPLY`` MAC merge layer status 271 ======================================== ================================= 272 273``GET`` requests are sent by userspace applications to retrieve device 274information. They usually do not contain any message specific attributes. 275Kernel replies with corresponding "GET_REPLY" message. For most types, ``GET`` 276request with ``NLM_F_DUMP`` and no device identification can be used to query 277the information for all devices supporting the request. 278 279If the data can be also modified, corresponding ``SET`` message with the same 280layout as corresponding ``GET_REPLY`` is used to request changes. Only 281attributes where a change is requested are included in such request (also, not 282all attributes may be changed). Replies to most ``SET`` request consist only 283of error code and extack; if kernel provides additional data, it is sent in 284the form of corresponding ``SET_REPLY`` message which can be suppressed by 285setting ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header. 286 287Data modification also triggers sending a ``NTF`` message with a notification. 288These usually bear only a subset of attributes which was affected by the 289change. The same notification is issued if the data is modified using other 290means (mostly ioctl ethtool interface). Unlike notifications from ethtool 291netlink code which are only sent if something actually changed, notifications 292triggered by ioctl interface may be sent even if the request did not actually 293change any data. 294 295``ACT`` messages request kernel (driver) to perform a specific action. If some 296information is reported by kernel (which can be suppressed by setting 297``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header), the reply takes form of 298an ``ACT_REPLY`` message. Performing an action also triggers a notification 299(``NTF`` message). 300 301Later sections describe the format and semantics of these messages. 302 303 304STRSET_GET 305========== 306 307Requests contents of a string set as provided by ioctl commands 308``ETHTOOL_GSSET_INFO`` and ``ETHTOOL_GSTRINGS.`` String sets are not user 309writeable so that the corresponding ``STRSET_SET`` message is only used in 310kernel replies. There are two types of string sets: global (independent of 311a device, e.g. device feature names) and device specific (e.g. device private 312flags). 313 314Request contents: 315 316 +---------------------------------------+--------+------------------------+ 317 | ``ETHTOOL_A_STRSET_HEADER`` | nested | request header | 318 +---------------------------------------+--------+------------------------+ 319 | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | string set to request | 320 +-+-------------------------------------+--------+------------------------+ 321 | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set | 322 +-+-+-----------------------------------+--------+------------------------+ 323 | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id | 324 +-+-+-----------------------------------+--------+------------------------+ 325 326Kernel response contents: 327 328 +---------------------------------------+--------+-----------------------+ 329 | ``ETHTOOL_A_STRSET_HEADER`` | nested | reply header | 330 +---------------------------------------+--------+-----------------------+ 331 | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | array of string sets | 332 +-+-------------------------------------+--------+-----------------------+ 333 | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set | 334 +-+-+-----------------------------------+--------+-----------------------+ 335 | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id | 336 +-+-+-----------------------------------+--------+-----------------------+ 337 | | | ``ETHTOOL_A_STRINGSET_COUNT`` | u32 | number of strings | 338 +-+-+-----------------------------------+--------+-----------------------+ 339 | | | ``ETHTOOL_A_STRINGSET_STRINGS`` | nested | array of strings | 340 +-+-+-+---------------------------------+--------+-----------------------+ 341 | | | | ``ETHTOOL_A_STRINGS_STRING+`` | nested | one string | 342 +-+-+-+-+-------------------------------+--------+-----------------------+ 343 | | | | | ``ETHTOOL_A_STRING_INDEX`` | u32 | string index | 344 +-+-+-+-+-------------------------------+--------+-----------------------+ 345 | | | | | ``ETHTOOL_A_STRING_VALUE`` | string | string value | 346 +-+-+-+-+-------------------------------+--------+-----------------------+ 347 | ``ETHTOOL_A_STRSET_COUNTS_ONLY`` | flag | return only counts | 348 +---------------------------------------+--------+-----------------------+ 349 350Device identification in request header is optional. Depending on its presence 351a and ``NLM_F_DUMP`` flag, there are three type of ``STRSET_GET`` requests: 352 353 - no ``NLM_F_DUMP,`` no device: get "global" stringsets 354 - no ``NLM_F_DUMP``, with device: get string sets related to the device 355 - ``NLM_F_DUMP``, no device: get device related string sets for all devices 356 357If there is no ``ETHTOOL_A_STRSET_STRINGSETS`` array, all string sets of 358requested type are returned, otherwise only those specified in the request. 359Flag ``ETHTOOL_A_STRSET_COUNTS_ONLY`` tells kernel to only return string 360counts of the sets, not the actual strings. 361 362 363LINKINFO_GET 364============ 365 366Requests link settings as provided by ``ETHTOOL_GLINKSETTINGS`` except for 367link modes and autonegotiation related information. The request does not use 368any attributes. 369 370Request contents: 371 372 ==================================== ====== ========================== 373 ``ETHTOOL_A_LINKINFO_HEADER`` nested request header 374 ==================================== ====== ========================== 375 376Kernel response contents: 377 378 ==================================== ====== ========================== 379 ``ETHTOOL_A_LINKINFO_HEADER`` nested reply header 380 ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port 381 ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address 382 ``ETHTOOL_A_LINKINFO_TP_MDIX`` u8 MDI(-X) status 383 ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control 384 ``ETHTOOL_A_LINKINFO_TRANSCEIVER`` u8 transceiver 385 ==================================== ====== ========================== 386 387Attributes and their values have the same meaning as matching members of the 388corresponding ioctl structures. 389 390``LINKINFO_GET`` allows dump requests (kernel returns reply message for all 391devices supporting the request). 392 393 394LINKINFO_SET 395============ 396 397``LINKINFO_SET`` request allows setting some of the attributes reported by 398``LINKINFO_GET``. 399 400Request contents: 401 402 ==================================== ====== ========================== 403 ``ETHTOOL_A_LINKINFO_HEADER`` nested request header 404 ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port 405 ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address 406 ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control 407 ==================================== ====== ========================== 408 409MDI(-X) status and transceiver cannot be set, request with the corresponding 410attributes is rejected. 411 412 413LINKMODES_GET 414============= 415 416Requests link modes (supported, advertised and peer advertised) and related 417information (autonegotiation status, link speed and duplex) as provided by 418``ETHTOOL_GLINKSETTINGS``. The request does not use any attributes. 419 420Request contents: 421 422 ==================================== ====== ========================== 423 ``ETHTOOL_A_LINKMODES_HEADER`` nested request header 424 ==================================== ====== ========================== 425 426Kernel response contents: 427 428 ========================================== ====== ========================== 429 ``ETHTOOL_A_LINKMODES_HEADER`` nested reply header 430 ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status 431 ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes 432 ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes 433 ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s) 434 ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode 435 ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode 436 ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE`` u8 Master/slave port state 437 ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching 438 ========================================== ====== ========================== 439 440For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask 441represents supported modes. ``ETHTOOL_A_LINKMODES_PEER`` in the reply is a bit 442list. 443 444``LINKMODES_GET`` allows dump requests (kernel returns reply messages for all 445devices supporting the request). 446 447 448LINKMODES_SET 449============= 450 451Request contents: 452 453 ========================================== ====== ========================== 454 ``ETHTOOL_A_LINKMODES_HEADER`` nested request header 455 ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status 456 ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes 457 ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes 458 ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s) 459 ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode 460 ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode 461 ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching 462 ``ETHTOOL_A_LINKMODES_LANES`` u32 lanes 463 ========================================== ====== ========================== 464 465``ETHTOOL_A_LINKMODES_OURS`` bit set allows setting advertised link modes. If 466autonegotiation is on (either set now or kept from before), advertised modes 467are not changed (no ``ETHTOOL_A_LINKMODES_OURS`` attribute) and at least one 468of speed, duplex and lanes is specified, kernel adjusts advertised modes to all 469supported modes matching speed, duplex, lanes or all (whatever is specified). 470This autoselection is done on ethtool side with ioctl interface, netlink 471interface is supposed to allow requesting changes without knowing what exactly 472kernel supports. 473 474 475LINKSTATE_GET 476============= 477 478Requests link state information. Link up/down flag (as provided by 479``ETHTOOL_GLINK`` ioctl command) is provided. Optionally, extended state might 480be provided as well. In general, extended state describes reasons for why a port 481is down, or why it operates in some non-obvious mode. This request does not have 482any attributes. 483 484Request contents: 485 486 ==================================== ====== ========================== 487 ``ETHTOOL_A_LINKSTATE_HEADER`` nested request header 488 ==================================== ====== ========================== 489 490Kernel response contents: 491 492 ==================================== ====== ============================ 493 ``ETHTOOL_A_LINKSTATE_HEADER`` nested reply header 494 ``ETHTOOL_A_LINKSTATE_LINK`` bool link state (up/down) 495 ``ETHTOOL_A_LINKSTATE_SQI`` u32 Current Signal Quality Index 496 ``ETHTOOL_A_LINKSTATE_SQI_MAX`` u32 Max support SQI value 497 ``ETHTOOL_A_LINKSTATE_EXT_STATE`` u8 link extended state 498 ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` u8 link extended substate 499 ``ETHTOOL_A_LINKSTATE_EXT_DOWN_CNT`` u32 count of link down events 500 ==================================== ====== ============================ 501 502For most NIC drivers, the value of ``ETHTOOL_A_LINKSTATE_LINK`` returns 503carrier flag provided by ``netif_carrier_ok()`` but there are drivers which 504define their own handler. 505 506``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` are 507optional values. ethtool core can provide either both 508``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE``, 509or only ``ETHTOOL_A_LINKSTATE_EXT_STATE``, or none of them. 510 511``LINKSTATE_GET`` allows dump requests (kernel returns reply messages for all 512devices supporting the request). 513 514 515Link extended states: 516 517 ================================================ ============================================ 518 ``ETHTOOL_LINK_EXT_STATE_AUTONEG`` States relating to the autonegotiation or 519 issues therein 520 521 ``ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE`` Failure during link training 522 523 ``ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH`` Logical mismatch in physical coding sublayer 524 or forward error correction sublayer 525 526 ``ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY`` Signal integrity issues 527 528 ``ETHTOOL_LINK_EXT_STATE_NO_CABLE`` No cable connected 529 530 ``ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE`` Failure is related to cable, 531 e.g., unsupported cable 532 533 ``ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE`` Failure is related to EEPROM, e.g., failure 534 during reading or parsing the data 535 536 ``ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE`` Failure during calibration algorithm 537 538 ``ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED`` The hardware is not able to provide the 539 power required from cable or module 540 541 ``ETHTOOL_LINK_EXT_STATE_OVERHEAT`` The module is overheated 542 543 ``ETHTOOL_LINK_EXT_STATE_MODULE`` Transceiver module issue 544 ================================================ ============================================ 545 546Link extended substates: 547 548 Autoneg substates: 549 550 =============================================================== ================================ 551 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED`` Peer side is down 552 553 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED`` Ack not received from peer side 554 555 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED`` Next page exchange failed 556 557 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE`` Peer side is down during force 558 mode or there is no agreement of 559 speed 560 561 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE`` Forward error correction modes 562 in both sides are mismatched 563 564 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD`` No Highest Common Denominator 565 =============================================================== ================================ 566 567 Link training substates: 568 569 =========================================================================== ==================== 570 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED`` Frames were not 571 recognized, the 572 lock failed 573 574 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT`` The lock did not 575 occur before 576 timeout 577 578 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY`` Peer side did not 579 send ready signal 580 after training 581 process 582 583 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT`` Remote side is not 584 ready yet 585 =========================================================================== ==================== 586 587 Link logical mismatch substates: 588 589 ================================================================ =============================== 590 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK`` Physical coding sublayer was 591 not locked in first phase - 592 block lock 593 594 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK`` Physical coding sublayer was 595 not locked in second phase - 596 alignment markers lock 597 598 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS`` Physical coding sublayer did 599 not get align status 600 601 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED`` FC forward error correction is 602 not locked 603 604 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED`` RS forward error correction is 605 not locked 606 ================================================================ =============================== 607 608 Bad signal integrity substates: 609 610 ================================================================= ============================= 611 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS`` Large number of physical 612 errors 613 614 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE`` The system attempted to 615 operate the cable at a rate 616 that is not formally 617 supported, which led to 618 signal integrity issues 619 620 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST`` The external clock signal for 621 SerDes is too weak or 622 unavailable. 623 624 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS`` The received signal for 625 SerDes is too weak because 626 analog loss of signal. 627 ================================================================= ============================= 628 629 Cable issue substates: 630 631 =================================================== ============================================ 632 ``ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE`` Unsupported cable 633 634 ``ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE`` Cable test failure 635 =================================================== ============================================ 636 637 Transceiver module issue substates: 638 639 =================================================== ============================================ 640 ``ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY`` The CMIS Module State Machine did not reach 641 the ModuleReady state. For example, if the 642 module is stuck at ModuleFault state 643 =================================================== ============================================ 644 645DEBUG_GET 646========= 647 648Requests debugging settings of a device. At the moment, only message mask is 649provided. 650 651Request contents: 652 653 ==================================== ====== ========================== 654 ``ETHTOOL_A_DEBUG_HEADER`` nested request header 655 ==================================== ====== ========================== 656 657Kernel response contents: 658 659 ==================================== ====== ========================== 660 ``ETHTOOL_A_DEBUG_HEADER`` nested reply header 661 ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask 662 ==================================== ====== ========================== 663 664The message mask (``ETHTOOL_A_DEBUG_MSGMASK``) is equal to message level as 665provided by ``ETHTOOL_GMSGLVL`` and set by ``ETHTOOL_SMSGLVL`` in ioctl 666interface. While it is called message level there for historical reasons, most 667drivers and almost all newer drivers use it as a mask of enabled message 668classes (represented by ``NETIF_MSG_*`` constants); therefore netlink 669interface follows its actual use in practice. 670 671``DEBUG_GET`` allows dump requests (kernel returns reply messages for all 672devices supporting the request). 673 674 675DEBUG_SET 676========= 677 678Set or update debugging settings of a device. At the moment, only message mask 679is supported. 680 681Request contents: 682 683 ==================================== ====== ========================== 684 ``ETHTOOL_A_DEBUG_HEADER`` nested request header 685 ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask 686 ==================================== ====== ========================== 687 688``ETHTOOL_A_DEBUG_MSGMASK`` bit set allows setting or modifying mask of 689enabled debugging message types for the device. 690 691 692WOL_GET 693======= 694 695Query device wake-on-lan settings. Unlike most "GET" type requests, 696``ETHTOOL_MSG_WOL_GET`` requires (netns) ``CAP_NET_ADMIN`` privileges as it 697(potentially) provides SecureOn(tm) password which is confidential. 698 699Request contents: 700 701 ==================================== ====== ========================== 702 ``ETHTOOL_A_WOL_HEADER`` nested request header 703 ==================================== ====== ========================== 704 705Kernel response contents: 706 707 ==================================== ====== ========================== 708 ``ETHTOOL_A_WOL_HEADER`` nested reply header 709 ``ETHTOOL_A_WOL_MODES`` bitset mask of enabled WoL modes 710 ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password 711 ==================================== ====== ========================== 712 713In reply, ``ETHTOOL_A_WOL_MODES`` mask consists of modes supported by the 714device, value of modes which are enabled. ``ETHTOOL_A_WOL_SOPASS`` is only 715included in reply if ``WAKE_MAGICSECURE`` mode is supported. 716 717 718WOL_SET 719======= 720 721Set or update wake-on-lan settings. 722 723Request contents: 724 725 ==================================== ====== ========================== 726 ``ETHTOOL_A_WOL_HEADER`` nested request header 727 ``ETHTOOL_A_WOL_MODES`` bitset enabled WoL modes 728 ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password 729 ==================================== ====== ========================== 730 731``ETHTOOL_A_WOL_SOPASS`` is only allowed for devices supporting 732``WAKE_MAGICSECURE`` mode. 733 734 735FEATURES_GET 736============ 737 738Gets netdev features like ``ETHTOOL_GFEATURES`` ioctl request. 739 740Request contents: 741 742 ==================================== ====== ========================== 743 ``ETHTOOL_A_FEATURES_HEADER`` nested request header 744 ==================================== ====== ========================== 745 746Kernel response contents: 747 748 ==================================== ====== ========================== 749 ``ETHTOOL_A_FEATURES_HEADER`` nested reply header 750 ``ETHTOOL_A_FEATURES_HW`` bitset dev->hw_features 751 ``ETHTOOL_A_FEATURES_WANTED`` bitset dev->wanted_features 752 ``ETHTOOL_A_FEATURES_ACTIVE`` bitset dev->features 753 ``ETHTOOL_A_FEATURES_NOCHANGE`` bitset NETIF_F_NEVER_CHANGE 754 ==================================== ====== ========================== 755 756Bitmaps in kernel response have the same meaning as bitmaps used in ioctl 757interference but attribute names are different (they are based on 758corresponding members of struct net_device). Legacy "flags" are not provided, 759if userspace needs them (most likely only ethtool for backward compatibility), 760it can calculate their values from related feature bits itself. 761ETHA_FEATURES_HW uses mask consisting of all features recognized by kernel (to 762provide all names when using verbose bitmap format), the other three use no 763mask (simple bit lists). 764 765 766FEATURES_SET 767============ 768 769Request to set netdev features like ``ETHTOOL_SFEATURES`` ioctl request. 770 771Request contents: 772 773 ==================================== ====== ========================== 774 ``ETHTOOL_A_FEATURES_HEADER`` nested request header 775 ``ETHTOOL_A_FEATURES_WANTED`` bitset requested features 776 ==================================== ====== ========================== 777 778Kernel response contents: 779 780 ==================================== ====== ========================== 781 ``ETHTOOL_A_FEATURES_HEADER`` nested reply header 782 ``ETHTOOL_A_FEATURES_WANTED`` bitset diff wanted vs. result 783 ``ETHTOOL_A_FEATURES_ACTIVE`` bitset diff old vs. new active 784 ==================================== ====== ========================== 785 786Request contains only one bitset which can be either value/mask pair (request 787to change specific feature bits and leave the rest) or only a value (request 788to set all features to specified set). 789 790As request is subject to netdev_change_features() sanity checks, optional 791kernel reply (can be suppressed by ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request 792header) informs client about the actual result. ``ETHTOOL_A_FEATURES_WANTED`` 793reports the difference between client request and actual result: mask consists 794of bits which differ between requested features and result (dev->features 795after the operation), value consists of values of these bits in the request 796(i.e. negated values from resulting features). ``ETHTOOL_A_FEATURES_ACTIVE`` 797reports the difference between old and new dev->features: mask consists of 798bits which have changed, values are their values in new dev->features (after 799the operation). 800 801``ETHTOOL_MSG_FEATURES_NTF`` notification is sent not only if device features 802are modified using ``ETHTOOL_MSG_FEATURES_SET`` request or on of ethtool ioctl 803request but also each time features are modified with netdev_update_features() 804or netdev_change_features(). 805 806 807PRIVFLAGS_GET 808============= 809 810Gets private flags like ``ETHTOOL_GPFLAGS`` ioctl request. 811 812Request contents: 813 814 ==================================== ====== ========================== 815 ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header 816 ==================================== ====== ========================== 817 818Kernel response contents: 819 820 ==================================== ====== ========================== 821 ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested reply header 822 ``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags 823 ==================================== ====== ========================== 824 825``ETHTOOL_A_PRIVFLAGS_FLAGS`` is a bitset with values of device private flags. 826These flags are defined by driver, their number and names (and also meaning) 827are device dependent. For compact bitset format, names can be retrieved as 828``ETH_SS_PRIV_FLAGS`` string set. If verbose bitset format is requested, 829response uses all private flags supported by the device as mask so that client 830gets the full information without having to fetch the string set with names. 831 832 833PRIVFLAGS_SET 834============= 835 836Sets or modifies values of device private flags like ``ETHTOOL_SPFLAGS`` 837ioctl request. 838 839Request contents: 840 841 ==================================== ====== ========================== 842 ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header 843 ``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags 844 ==================================== ====== ========================== 845 846``ETHTOOL_A_PRIVFLAGS_FLAGS`` can either set the whole set of private flags or 847modify only values of some of them. 848 849 850RINGS_GET 851========= 852 853Gets ring sizes like ``ETHTOOL_GRINGPARAM`` ioctl request. 854 855Request contents: 856 857 ==================================== ====== ========================== 858 ``ETHTOOL_A_RINGS_HEADER`` nested request header 859 ==================================== ====== ========================== 860 861Kernel response contents: 862 863 ==================================== ====== =========================== 864 ``ETHTOOL_A_RINGS_HEADER`` nested reply header 865 ``ETHTOOL_A_RINGS_RX_MAX`` u32 max size of RX ring 866 ``ETHTOOL_A_RINGS_RX_MINI_MAX`` u32 max size of RX mini ring 867 ``ETHTOOL_A_RINGS_RX_JUMBO_MAX`` u32 max size of RX jumbo ring 868 ``ETHTOOL_A_RINGS_TX_MAX`` u32 max size of TX ring 869 ``ETHTOOL_A_RINGS_RX`` u32 size of RX ring 870 ``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring 871 ``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring 872 ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring 873 ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring 874 ``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` u8 TCP header / data split 875 ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE 876 ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode 877 ``ETHTOOL_A_RINGS_RX_PUSH`` u8 flag of RX Push mode 878 ==================================== ====== =========================== 879 880``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` indicates whether the device is usable with 881page-flipping TCP zero-copy receive (``getsockopt(TCP_ZEROCOPY_RECEIVE)``). 882If enabled the device is configured to place frame headers and data into 883separate buffers. The device configuration must make it possible to receive 884full memory pages of data, for example because MTU is high enough or through 885HW-GRO. 886 887``ETHTOOL_A_RINGS_[RX|TX]_PUSH`` flag is used to enable descriptor fast 888path to send or receive packets. In ordinary path, driver fills descriptors in DRAM and 889notifies NIC hardware. In fast path, driver pushes descriptors to the device 890through MMIO writes, thus reducing the latency. However, enabling this feature 891may increase the CPU cost. Drivers may enforce additional per-packet 892eligibility checks (e.g. on packet size). 893 894RINGS_SET 895========= 896 897Sets ring sizes like ``ETHTOOL_SRINGPARAM`` ioctl request. 898 899Request contents: 900 901 ==================================== ====== =========================== 902 ``ETHTOOL_A_RINGS_HEADER`` nested reply header 903 ``ETHTOOL_A_RINGS_RX`` u32 size of RX ring 904 ``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring 905 ``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring 906 ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring 907 ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring 908 ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE 909 ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode 910 ``ETHTOOL_A_RINGS_RX_PUSH`` u8 flag of RX Push mode 911 ==================================== ====== =========================== 912 913Kernel checks that requested ring sizes do not exceed limits reported by 914driver. Driver may impose additional constraints and may not suspport all 915attributes. 916 917 918``ETHTOOL_A_RINGS_CQE_SIZE`` specifies the completion queue event size. 919Completion queue events(CQE) are the events posted by NIC to indicate the 920completion status of a packet when the packet is sent(like send success or 921error) or received(like pointers to packet fragments). The CQE size parameter 922enables to modify the CQE size other than default size if NIC supports it. 923A bigger CQE can have more receive buffer pointers inturn NIC can transfer 924a bigger frame from wire. Based on the NIC hardware, the overall completion 925queue size can be adjusted in the driver if CQE size is modified. 926 927CHANNELS_GET 928============ 929 930Gets channel counts like ``ETHTOOL_GCHANNELS`` ioctl request. 931 932Request contents: 933 934 ==================================== ====== ========================== 935 ``ETHTOOL_A_CHANNELS_HEADER`` nested request header 936 ==================================== ====== ========================== 937 938Kernel response contents: 939 940 ===================================== ====== ========================== 941 ``ETHTOOL_A_CHANNELS_HEADER`` nested reply header 942 ``ETHTOOL_A_CHANNELS_RX_MAX`` u32 max receive channels 943 ``ETHTOOL_A_CHANNELS_TX_MAX`` u32 max transmit channels 944 ``ETHTOOL_A_CHANNELS_OTHER_MAX`` u32 max other channels 945 ``ETHTOOL_A_CHANNELS_COMBINED_MAX`` u32 max combined channels 946 ``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count 947 ``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count 948 ``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count 949 ``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count 950 ===================================== ====== ========================== 951 952 953CHANNELS_SET 954============ 955 956Sets channel counts like ``ETHTOOL_SCHANNELS`` ioctl request. 957 958Request contents: 959 960 ===================================== ====== ========================== 961 ``ETHTOOL_A_CHANNELS_HEADER`` nested request header 962 ``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count 963 ``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count 964 ``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count 965 ``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count 966 ===================================== ====== ========================== 967 968Kernel checks that requested channel counts do not exceed limits reported by 969driver. Driver may impose additional constraints and may not suspport all 970attributes. 971 972 973COALESCE_GET 974============ 975 976Gets coalescing parameters like ``ETHTOOL_GCOALESCE`` ioctl request. 977 978Request contents: 979 980 ==================================== ====== ========================== 981 ``ETHTOOL_A_COALESCE_HEADER`` nested request header 982 ==================================== ====== ========================== 983 984Kernel response contents: 985 986 =========================================== ====== ======================= 987 ``ETHTOOL_A_COALESCE_HEADER`` nested reply header 988 ``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx 989 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx 990 ``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ 991 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ 992 ``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx 993 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx 994 ``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ 995 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ 996 ``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update 997 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce 998 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce 999 ``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate 1000 ``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx 1001 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx 1002 ``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx 1003 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx 1004 ``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate 1005 ``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx 1006 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx 1007 ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx 1008 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx 1009 ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval 1010 ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx 1011 ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx 1012 ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`` u32 max aggr size, Tx 1013 ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`` u32 max aggr packets, Tx 1014 ``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` u32 time (us), aggr, Tx 1015 =========================================== ====== ======================= 1016 1017Attributes are only included in reply if their value is not zero or the 1018corresponding bit in ``ethtool_ops::supported_coalesce_params`` is set (i.e. 1019they are declared as supported by driver). 1020 1021Timer reset mode (``ETHTOOL_A_COALESCE_USE_CQE_TX`` and 1022``ETHTOOL_A_COALESCE_USE_CQE_RX``) controls the interaction between packet 1023arrival and the various time based delay parameters. By default timers are 1024expected to limit the max delay between any packet arrival/departure and a 1025corresponding interrupt. In this mode timer should be started by packet 1026arrival (sometimes delivery of previous interrupt) and reset when interrupt 1027is delivered. 1028Setting the appropriate attribute to 1 will enable ``CQE`` mode, where 1029each packet event resets the timer. In this mode timer is used to force 1030the interrupt if queue goes idle, while busy queues depend on the packet 1031limit to trigger interrupts. 1032 1033Tx aggregation consists of copying frames into a contiguous buffer so that they 1034can be submitted as a single IO operation. ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`` 1035describes the maximum size in bytes for the submitted buffer. 1036``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`` describes the maximum number of frames 1037that can be aggregated into a single buffer. 1038``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` describes the amount of time in usecs, 1039counted since the first packet arrival in an aggregated block, after which the 1040block should be sent. 1041This feature is mainly of interest for specific USB devices which does not cope 1042well with frequent small-sized URBs transmissions. 1043 1044COALESCE_SET 1045============ 1046 1047Sets coalescing parameters like ``ETHTOOL_SCOALESCE`` ioctl request. 1048 1049Request contents: 1050 1051 =========================================== ====== ======================= 1052 ``ETHTOOL_A_COALESCE_HEADER`` nested request header 1053 ``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx 1054 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx 1055 ``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ 1056 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ 1057 ``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx 1058 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx 1059 ``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ 1060 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ 1061 ``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update 1062 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce 1063 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce 1064 ``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate 1065 ``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx 1066 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx 1067 ``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx 1068 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx 1069 ``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate 1070 ``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx 1071 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx 1072 ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx 1073 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx 1074 ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval 1075 ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx 1076 ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx 1077 ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`` u32 max aggr size, Tx 1078 ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`` u32 max aggr packets, Tx 1079 ``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` u32 time (us), aggr, Tx 1080 =========================================== ====== ======================= 1081 1082Request is rejected if it attributes declared as unsupported by driver (i.e. 1083such that the corresponding bit in ``ethtool_ops::supported_coalesce_params`` 1084is not set), regardless of their values. Driver may impose additional 1085constraints on coalescing parameters and their values. 1086 1087 1088PAUSE_GET 1089========= 1090 1091Gets pause frame settings like ``ETHTOOL_GPAUSEPARAM`` ioctl request. 1092 1093Request contents: 1094 1095 ===================================== ====== ========================== 1096 ``ETHTOOL_A_PAUSE_HEADER`` nested request header 1097 ``ETHTOOL_A_PAUSE_STATS_SRC`` u32 source of statistics 1098 ===================================== ====== ========================== 1099 1100``ETHTOOL_A_PAUSE_STATS_SRC`` is optional. It takes values from: 1101 1102.. kernel-doc:: include/uapi/linux/ethtool.h 1103 :identifiers: ethtool_mac_stats_src 1104 1105If absent from the request, stats will be provided with 1106an ``ETHTOOL_A_PAUSE_STATS_SRC`` attribute in the response equal to 1107``ETHTOOL_MAC_STATS_SRC_AGGREGATE``. 1108 1109Kernel response contents: 1110 1111 ===================================== ====== ========================== 1112 ``ETHTOOL_A_PAUSE_HEADER`` nested request header 1113 ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation 1114 ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames 1115 ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames 1116 ``ETHTOOL_A_PAUSE_STATS`` nested pause statistics 1117 ===================================== ====== ========================== 1118 1119``ETHTOOL_A_PAUSE_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set 1120in ``ETHTOOL_A_HEADER_FLAGS``. 1121It will be empty if driver did not report any statistics. Drivers fill in 1122the statistics in the following structure: 1123 1124.. kernel-doc:: include/linux/ethtool.h 1125 :identifiers: ethtool_pause_stats 1126 1127Each member has a corresponding attribute defined. 1128 1129PAUSE_SET 1130========= 1131 1132Sets pause parameters like ``ETHTOOL_GPAUSEPARAM`` ioctl request. 1133 1134Request contents: 1135 1136 ===================================== ====== ========================== 1137 ``ETHTOOL_A_PAUSE_HEADER`` nested request header 1138 ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation 1139 ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames 1140 ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames 1141 ===================================== ====== ========================== 1142 1143 1144EEE_GET 1145======= 1146 1147Gets Energy Efficient Ethernet settings like ``ETHTOOL_GEEE`` ioctl request. 1148 1149Request contents: 1150 1151 ===================================== ====== ========================== 1152 ``ETHTOOL_A_EEE_HEADER`` nested request header 1153 ===================================== ====== ========================== 1154 1155Kernel response contents: 1156 1157 ===================================== ====== ========================== 1158 ``ETHTOOL_A_EEE_HEADER`` nested request header 1159 ``ETHTOOL_A_EEE_MODES_OURS`` bool supported/advertised modes 1160 ``ETHTOOL_A_EEE_MODES_PEER`` bool peer advertised link modes 1161 ``ETHTOOL_A_EEE_ACTIVE`` bool EEE is actively used 1162 ``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled 1163 ``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled 1164 ``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us) 1165 ===================================== ====== ========================== 1166 1167In ``ETHTOOL_A_EEE_MODES_OURS``, mask consists of link modes for which EEE is 1168enabled, value of link modes for which EEE is advertised. Link modes for which 1169peer advertises EEE are listed in ``ETHTOOL_A_EEE_MODES_PEER`` (no mask). The 1170netlink interface allows reporting EEE status for all link modes but only 1171first 32 are provided by the ``ethtool_ops`` callback. 1172 1173 1174EEE_SET 1175======= 1176 1177Sets Energy Efficient Ethernet parameters like ``ETHTOOL_SEEE`` ioctl request. 1178 1179Request contents: 1180 1181 ===================================== ====== ========================== 1182 ``ETHTOOL_A_EEE_HEADER`` nested request header 1183 ``ETHTOOL_A_EEE_MODES_OURS`` bool advertised modes 1184 ``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled 1185 ``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled 1186 ``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us) 1187 ===================================== ====== ========================== 1188 1189``ETHTOOL_A_EEE_MODES_OURS`` is used to either list link modes to advertise 1190EEE for (if there is no mask) or specify changes to the list (if there is 1191a mask). The netlink interface allows reporting EEE status for all link modes 1192but only first 32 can be set at the moment as that is what the ``ethtool_ops`` 1193callback supports. 1194 1195 1196TSINFO_GET 1197========== 1198 1199Gets timestamping information like ``ETHTOOL_GET_TS_INFO`` ioctl request. 1200 1201Request contents: 1202 1203 ===================================== ====== ========================== 1204 ``ETHTOOL_A_TSINFO_HEADER`` nested request header 1205 ===================================== ====== ========================== 1206 1207Kernel response contents: 1208 1209 ===================================== ====== ========================== 1210 ``ETHTOOL_A_TSINFO_HEADER`` nested request header 1211 ``ETHTOOL_A_TSINFO_TIMESTAMPING`` bitset SO_TIMESTAMPING flags 1212 ``ETHTOOL_A_TSINFO_TX_TYPES`` bitset supported Tx types 1213 ``ETHTOOL_A_TSINFO_RX_FILTERS`` bitset supported Rx filters 1214 ``ETHTOOL_A_TSINFO_PHC_INDEX`` u32 PTP hw clock index 1215 ===================================== ====== ========================== 1216 1217``ETHTOOL_A_TSINFO_PHC_INDEX`` is absent if there is no associated PHC (there 1218is no special value for this case). The bitset attributes are omitted if they 1219would be empty (no bit set). 1220 1221CABLE_TEST 1222========== 1223 1224Start a cable test. 1225 1226Request contents: 1227 1228 ==================================== ====== ========================== 1229 ``ETHTOOL_A_CABLE_TEST_HEADER`` nested request header 1230 ==================================== ====== ========================== 1231 1232Notification contents: 1233 1234An Ethernet cable typically contains 1, 2 or 4 pairs. The length of 1235the pair can only be measured when there is a fault in the pair and 1236hence a reflection. Information about the fault may not be available, 1237depending on the specific hardware. Hence the contents of the notify 1238message are mostly optional. The attributes can be repeated an 1239arbitrary number of times, in an arbitrary order, for an arbitrary 1240number of pairs. 1241 1242The example shows the notification sent when the test is completed for 1243a T2 cable, i.e. two pairs. One pair is OK and hence has no length 1244information. The second pair has a fault and does have length 1245information. 1246 1247 +---------------------------------------------+--------+---------------------+ 1248 | ``ETHTOOL_A_CABLE_TEST_HEADER`` | nested | reply header | 1249 +---------------------------------------------+--------+---------------------+ 1250 | ``ETHTOOL_A_CABLE_TEST_STATUS`` | u8 | completed | 1251 +---------------------------------------------+--------+---------------------+ 1252 | ``ETHTOOL_A_CABLE_TEST_NTF_NEST`` | nested | all the results | 1253 +-+-------------------------------------------+--------+---------------------+ 1254 | | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test result | 1255 +-+-+-----------------------------------------+--------+---------------------+ 1256 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | 1257 +-+-+-----------------------------------------+--------+---------------------+ 1258 | | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code | 1259 +-+-+-----------------------------------------+--------+---------------------+ 1260 | | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test results | 1261 +-+-+-----------------------------------------+--------+---------------------+ 1262 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | 1263 +-+-+-----------------------------------------+--------+---------------------+ 1264 | | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code | 1265 +-+-+-----------------------------------------+--------+---------------------+ 1266 | | ``ETHTOOL_A_CABLE_NEST_FAULT_LENGTH`` | nested | cable length | 1267 +-+-+-----------------------------------------+--------+---------------------+ 1268 | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR`` | u8 | pair number | 1269 +-+-+-----------------------------------------+--------+---------------------+ 1270 | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_CM`` | u32 | length in cm | 1271 +-+-+-----------------------------------------+--------+---------------------+ 1272 1273CABLE_TEST TDR 1274============== 1275 1276Start a cable test and report raw TDR data 1277 1278Request contents: 1279 1280 +--------------------------------------------+--------+-----------------------+ 1281 | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header | 1282 +--------------------------------------------+--------+-----------------------+ 1283 | ``ETHTOOL_A_CABLE_TEST_TDR_CFG`` | nested | test configuration | 1284 +-+------------------------------------------+--------+-----------------------+ 1285 | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | first data distance | 1286 +-+-+----------------------------------------+--------+-----------------------+ 1287 | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | last data distance | 1288 +-+-+----------------------------------------+--------+-----------------------+ 1289 | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step | 1290 +-+-+----------------------------------------+--------+-----------------------+ 1291 | | ``ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR`` | u8 | pair to test | 1292 +-+-+----------------------------------------+--------+-----------------------+ 1293 1294The ETHTOOL_A_CABLE_TEST_TDR_CFG is optional, as well as all members 1295of the nest. All distances are expressed in centimeters. The PHY takes 1296the distances as a guide, and rounds to the nearest distance it 1297actually supports. If a pair is passed, only that one pair will be 1298tested. Otherwise all pairs are tested. 1299 1300Notification contents: 1301 1302Raw TDR data is gathered by sending a pulse down the cable and 1303recording the amplitude of the reflected pulse for a given distance. 1304 1305It can take a number of seconds to collect TDR data, especial if the 1306full 100 meters is probed at 1 meter intervals. When the test is 1307started a notification will be sent containing just 1308ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value 1309ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED. 1310 1311When the test has completed a second notification will be sent 1312containing ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value 1313ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED and the TDR data. 1314 1315The message may optionally contain the amplitude of the pulse send 1316down the cable. This is measured in mV. A reflection should not be 1317bigger than transmitted pulse. 1318 1319Before the raw TDR data should be an ETHTOOL_A_CABLE_TDR_NEST_STEP 1320nest containing information about the distance along the cable for the 1321first reading, the last reading, and the step between each 1322reading. Distances are measured in centimeters. These should be the 1323exact values the PHY used. These may be different to what the user 1324requested, if the native measurement resolution is greater than 1 cm. 1325 1326For each step along the cable, a ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE is 1327used to report the amplitude of the reflection for a given pair. 1328 1329 +---------------------------------------------+--------+----------------------+ 1330 | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header | 1331 +---------------------------------------------+--------+----------------------+ 1332 | ``ETHTOOL_A_CABLE_TEST_TDR_STATUS`` | u8 | completed | 1333 +---------------------------------------------+--------+----------------------+ 1334 | ``ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST`` | nested | all the results | 1335 +-+-------------------------------------------+--------+----------------------+ 1336 | | ``ETHTOOL_A_CABLE_TDR_NEST_PULSE`` | nested | TX Pulse amplitude | 1337 +-+-+-----------------------------------------+--------+----------------------+ 1338 | | | ``ETHTOOL_A_CABLE_PULSE_mV`` | s16 | Pulse amplitude | 1339 +-+-+-----------------------------------------+--------+----------------------+ 1340 | | ``ETHTOOL_A_CABLE_NEST_STEP`` | nested | TDR step info | 1341 +-+-+-----------------------------------------+--------+----------------------+ 1342 | | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | First data distance | 1343 +-+-+-----------------------------------------+--------+----------------------+ 1344 | | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | Last data distance | 1345 +-+-+-----------------------------------------+--------+----------------------+ 1346 | | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step| 1347 +-+-+-----------------------------------------+--------+----------------------+ 1348 | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude | 1349 +-+-+-----------------------------------------+--------+----------------------+ 1350 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | 1351 +-+-+-----------------------------------------+--------+----------------------+ 1352 | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude | 1353 +-+-+-----------------------------------------+--------+----------------------+ 1354 | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude | 1355 +-+-+-----------------------------------------+--------+----------------------+ 1356 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | 1357 +-+-+-----------------------------------------+--------+----------------------+ 1358 | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude | 1359 +-+-+-----------------------------------------+--------+----------------------+ 1360 | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude | 1361 +-+-+-----------------------------------------+--------+----------------------+ 1362 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | 1363 +-+-+-----------------------------------------+--------+----------------------+ 1364 | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude | 1365 +-+-+-----------------------------------------+--------+----------------------+ 1366 1367TUNNEL_INFO 1368=========== 1369 1370Gets information about the tunnel state NIC is aware of. 1371 1372Request contents: 1373 1374 ===================================== ====== ========================== 1375 ``ETHTOOL_A_TUNNEL_INFO_HEADER`` nested request header 1376 ===================================== ====== ========================== 1377 1378Kernel response contents: 1379 1380 +---------------------------------------------+--------+---------------------+ 1381 | ``ETHTOOL_A_TUNNEL_INFO_HEADER`` | nested | reply header | 1382 +---------------------------------------------+--------+---------------------+ 1383 | ``ETHTOOL_A_TUNNEL_INFO_UDP_PORTS`` | nested | all UDP port tables | 1384 +-+-------------------------------------------+--------+---------------------+ 1385 | | ``ETHTOOL_A_TUNNEL_UDP_TABLE`` | nested | one UDP port table | 1386 +-+-+-----------------------------------------+--------+---------------------+ 1387 | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_SIZE`` | u32 | max size of the | 1388 | | | | | table | 1389 +-+-+-----------------------------------------+--------+---------------------+ 1390 | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` | bitset | tunnel types which | 1391 | | | | | table can hold | 1392 +-+-+-----------------------------------------+--------+---------------------+ 1393 | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_ENTRY`` | nested | offloaded UDP port | 1394 +-+-+-+---------------------------------------+--------+---------------------+ 1395 | | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_PORT`` | be16 | UDP port | 1396 +-+-+-+---------------------------------------+--------+---------------------+ 1397 | | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_TYPE`` | u32 | tunnel type | 1398 +-+-+-+---------------------------------------+--------+---------------------+ 1399 1400For UDP tunnel table empty ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` indicates that 1401the table contains static entries, hard-coded by the NIC. 1402 1403FEC_GET 1404======= 1405 1406Gets FEC configuration and state like ``ETHTOOL_GFECPARAM`` ioctl request. 1407 1408Request contents: 1409 1410 ===================================== ====== ========================== 1411 ``ETHTOOL_A_FEC_HEADER`` nested request header 1412 ===================================== ====== ========================== 1413 1414Kernel response contents: 1415 1416 ===================================== ====== ========================== 1417 ``ETHTOOL_A_FEC_HEADER`` nested request header 1418 ``ETHTOOL_A_FEC_MODES`` bitset configured modes 1419 ``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection 1420 ``ETHTOOL_A_FEC_ACTIVE`` u32 index of active FEC mode 1421 ``ETHTOOL_A_FEC_STATS`` nested FEC statistics 1422 ===================================== ====== ========================== 1423 1424``ETHTOOL_A_FEC_ACTIVE`` is the bit index of the FEC link mode currently 1425active on the interface. This attribute may not be present if device does 1426not support FEC. 1427 1428``ETHTOOL_A_FEC_MODES`` and ``ETHTOOL_A_FEC_AUTO`` are only meaningful when 1429autonegotiation is disabled. If ``ETHTOOL_A_FEC_AUTO`` is non-zero driver will 1430select the FEC mode automatically based on the parameters of the SFP module. 1431This is equivalent to the ``ETHTOOL_FEC_AUTO`` bit of the ioctl interface. 1432``ETHTOOL_A_FEC_MODES`` carry the current FEC configuration using link mode 1433bits (rather than old ``ETHTOOL_FEC_*`` bits). 1434 1435``ETHTOOL_A_FEC_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set in 1436``ETHTOOL_A_HEADER_FLAGS``. 1437Each attribute carries an array of 64bit statistics. First entry in the array 1438contains the total number of events on the port, while the following entries 1439are counters corresponding to lanes/PCS instances. The number of entries in 1440the array will be: 1441 1442+--------------+---------------------------------------------+ 1443| `0` | device does not support FEC statistics | 1444+--------------+---------------------------------------------+ 1445| `1` | device does not support per-lane break down | 1446+--------------+---------------------------------------------+ 1447| `1 + #lanes` | device has full support for FEC stats | 1448+--------------+---------------------------------------------+ 1449 1450Drivers fill in the statistics in the following structure: 1451 1452.. kernel-doc:: include/linux/ethtool.h 1453 :identifiers: ethtool_fec_stats 1454 1455FEC_SET 1456======= 1457 1458Sets FEC parameters like ``ETHTOOL_SFECPARAM`` ioctl request. 1459 1460Request contents: 1461 1462 ===================================== ====== ========================== 1463 ``ETHTOOL_A_FEC_HEADER`` nested request header 1464 ``ETHTOOL_A_FEC_MODES`` bitset configured modes 1465 ``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection 1466 ===================================== ====== ========================== 1467 1468``FEC_SET`` is only meaningful when autonegotiation is disabled. Otherwise 1469FEC mode is selected as part of autonegotiation. 1470 1471``ETHTOOL_A_FEC_MODES`` selects which FEC mode should be used. It's recommended 1472to set only one bit, if multiple bits are set driver may choose between them 1473in an implementation specific way. 1474 1475``ETHTOOL_A_FEC_AUTO`` requests the driver to choose FEC mode based on SFP 1476module parameters. This does not mean autonegotiation. 1477 1478MODULE_EEPROM_GET 1479================= 1480 1481Fetch module EEPROM data dump. 1482This interface is designed to allow dumps of at most 1/2 page at once. This 1483means only dumps of 128 (or less) bytes are allowed, without crossing half page 1484boundary located at offset 128. For pages other than 0 only high 128 bytes are 1485accessible. 1486 1487Request contents: 1488 1489 ======================================= ====== ========================== 1490 ``ETHTOOL_A_MODULE_EEPROM_HEADER`` nested request header 1491 ``ETHTOOL_A_MODULE_EEPROM_OFFSET`` u32 offset within a page 1492 ``ETHTOOL_A_MODULE_EEPROM_LENGTH`` u32 amount of bytes to read 1493 ``ETHTOOL_A_MODULE_EEPROM_PAGE`` u8 page number 1494 ``ETHTOOL_A_MODULE_EEPROM_BANK`` u8 bank number 1495 ``ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS`` u8 page I2C address 1496 ======================================= ====== ========================== 1497 1498If ``ETHTOOL_A_MODULE_EEPROM_BANK`` is not specified, bank 0 is assumed. 1499 1500Kernel response contents: 1501 1502 +---------------------------------------------+--------+---------------------+ 1503 | ``ETHTOOL_A_MODULE_EEPROM_HEADER`` | nested | reply header | 1504 +---------------------------------------------+--------+---------------------+ 1505 | ``ETHTOOL_A_MODULE_EEPROM_DATA`` | binary | array of bytes from | 1506 | | | module EEPROM | 1507 +---------------------------------------------+--------+---------------------+ 1508 1509``ETHTOOL_A_MODULE_EEPROM_DATA`` has an attribute length equal to the amount of 1510bytes driver actually read. 1511 1512STATS_GET 1513========= 1514 1515Get standard statistics for the interface. Note that this is not 1516a re-implementation of ``ETHTOOL_GSTATS`` which exposed driver-defined 1517stats. 1518 1519Request contents: 1520 1521 ======================================= ====== ========================== 1522 ``ETHTOOL_A_STATS_HEADER`` nested request header 1523 ``ETHTOOL_A_STATS_SRC`` u32 source of statistics 1524 ``ETHTOOL_A_STATS_GROUPS`` bitset requested groups of stats 1525 ======================================= ====== ========================== 1526 1527Kernel response contents: 1528 1529 +-----------------------------------+--------+--------------------------------+ 1530 | ``ETHTOOL_A_STATS_HEADER`` | nested | reply header | 1531 +-----------------------------------+--------+--------------------------------+ 1532 | ``ETHTOOL_A_STATS_SRC`` | u32 | source of statistics | 1533 +-----------------------------------+--------+--------------------------------+ 1534 | ``ETHTOOL_A_STATS_GRP`` | nested | one or more group of stats | 1535 +-+---------------------------------+--------+--------------------------------+ 1536 | | ``ETHTOOL_A_STATS_GRP_ID`` | u32 | group ID - ``ETHTOOL_STATS_*`` | 1537 +-+---------------------------------+--------+--------------------------------+ 1538 | | ``ETHTOOL_A_STATS_GRP_SS_ID`` | u32 | string set ID for names | 1539 +-+---------------------------------+--------+--------------------------------+ 1540 | | ``ETHTOOL_A_STATS_GRP_STAT`` | nested | nest containing a statistic | 1541 +-+---------------------------------+--------+--------------------------------+ 1542 | | ``ETHTOOL_A_STATS_GRP_HIST_RX`` | nested | histogram statistic (Rx) | 1543 +-+---------------------------------+--------+--------------------------------+ 1544 | | ``ETHTOOL_A_STATS_GRP_HIST_TX`` | nested | histogram statistic (Tx) | 1545 +-+---------------------------------+--------+--------------------------------+ 1546 1547Users specify which groups of statistics they are requesting via 1548the ``ETHTOOL_A_STATS_GROUPS`` bitset. Currently defined values are: 1549 1550 ====================== ======== =============================================== 1551 ETHTOOL_STATS_ETH_MAC eth-mac Basic IEEE 802.3 MAC statistics (30.3.1.1.*) 1552 ETHTOOL_STATS_ETH_PHY eth-phy Basic IEEE 802.3 PHY statistics (30.3.2.1.*) 1553 ETHTOOL_STATS_ETH_CTRL eth-ctrl Basic IEEE 802.3 MAC Ctrl statistics (30.3.3.*) 1554 ETHTOOL_STATS_RMON rmon RMON (RFC 2819) statistics 1555 ====================== ======== =============================================== 1556 1557Each group should have a corresponding ``ETHTOOL_A_STATS_GRP`` in the reply. 1558``ETHTOOL_A_STATS_GRP_ID`` identifies which group's statistics nest contains. 1559``ETHTOOL_A_STATS_GRP_SS_ID`` identifies the string set ID for the names of 1560the statistics in the group, if available. 1561 1562Statistics are added to the ``ETHTOOL_A_STATS_GRP`` nest under 1563``ETHTOOL_A_STATS_GRP_STAT``. ``ETHTOOL_A_STATS_GRP_STAT`` should contain 1564single 8 byte (u64) attribute inside - the type of that attribute is 1565the statistic ID and the value is the value of the statistic. 1566Each group has its own interpretation of statistic IDs. 1567Attribute IDs correspond to strings from the string set identified 1568by ``ETHTOOL_A_STATS_GRP_SS_ID``. Complex statistics (such as RMON histogram 1569entries) are also listed inside ``ETHTOOL_A_STATS_GRP`` and do not have 1570a string defined in the string set. 1571 1572RMON "histogram" counters count number of packets within given size range. 1573Because RFC does not specify the ranges beyond the standard 1518 MTU devices 1574differ in definition of buckets. For this reason the definition of packet ranges 1575is left to each driver. 1576 1577``ETHTOOL_A_STATS_GRP_HIST_RX`` and ``ETHTOOL_A_STATS_GRP_HIST_TX`` nests 1578contain the following attributes: 1579 1580 ================================= ====== =================================== 1581 ETHTOOL_A_STATS_RMON_HIST_BKT_LOW u32 low bound of the packet size bucket 1582 ETHTOOL_A_STATS_RMON_HIST_BKT_HI u32 high bound of the bucket 1583 ETHTOOL_A_STATS_RMON_HIST_VAL u64 packet counter 1584 ================================= ====== =================================== 1585 1586Low and high bounds are inclusive, for example: 1587 1588 ============================= ==== ==== 1589 RFC statistic low high 1590 ============================= ==== ==== 1591 etherStatsPkts64Octets 0 64 1592 etherStatsPkts512to1023Octets 512 1023 1593 ============================= ==== ==== 1594 1595``ETHTOOL_A_STATS_SRC`` is optional. Similar to ``PAUSE_GET``, it takes values 1596from ``enum ethtool_mac_stats_src``. If absent from the request, stats will be 1597provided with an ``ETHTOOL_A_STATS_SRC`` attribute in the response equal to 1598``ETHTOOL_MAC_STATS_SRC_AGGREGATE``. 1599 1600PHC_VCLOCKS_GET 1601=============== 1602 1603Query device PHC virtual clocks information. 1604 1605Request contents: 1606 1607 ==================================== ====== ========================== 1608 ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested request header 1609 ==================================== ====== ========================== 1610 1611Kernel response contents: 1612 1613 ==================================== ====== ========================== 1614 ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested reply header 1615 ``ETHTOOL_A_PHC_VCLOCKS_NUM`` u32 PHC virtual clocks number 1616 ``ETHTOOL_A_PHC_VCLOCKS_INDEX`` s32 PHC index array 1617 ==================================== ====== ========================== 1618 1619MODULE_GET 1620========== 1621 1622Gets transceiver module parameters. 1623 1624Request contents: 1625 1626 ===================================== ====== ========================== 1627 ``ETHTOOL_A_MODULE_HEADER`` nested request header 1628 ===================================== ====== ========================== 1629 1630Kernel response contents: 1631 1632 ====================================== ====== ========================== 1633 ``ETHTOOL_A_MODULE_HEADER`` nested reply header 1634 ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy 1635 ``ETHTOOL_A_MODULE_POWER_MODE`` u8 operational power mode 1636 ====================================== ====== ========================== 1637 1638The optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute encodes the 1639transceiver module power mode policy enforced by the host. The default policy 1640is driver-dependent, but "auto" is the recommended default and it should be 1641implemented by new drivers and drivers where conformance to a legacy behavior 1642is not critical. 1643 1644The optional ``ETHTHOOL_A_MODULE_POWER_MODE`` attribute encodes the operational 1645power mode policy of the transceiver module. It is only reported when a module 1646is plugged-in. Possible values are: 1647 1648.. kernel-doc:: include/uapi/linux/ethtool.h 1649 :identifiers: ethtool_module_power_mode 1650 1651MODULE_SET 1652========== 1653 1654Sets transceiver module parameters. 1655 1656Request contents: 1657 1658 ====================================== ====== ========================== 1659 ``ETHTOOL_A_MODULE_HEADER`` nested request header 1660 ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy 1661 ====================================== ====== ========================== 1662 1663When set, the optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute is used 1664to set the transceiver module power policy enforced by the host. Possible 1665values are: 1666 1667.. kernel-doc:: include/uapi/linux/ethtool.h 1668 :identifiers: ethtool_module_power_mode_policy 1669 1670For SFF-8636 modules, low power mode is forced by the host according to table 16716-10 in revision 2.10a of the specification. 1672 1673For CMIS modules, low power mode is forced by the host according to table 6-12 1674in revision 5.0 of the specification. 1675 1676PSE_GET 1677======= 1678 1679Gets PSE attributes. 1680 1681Request contents: 1682 1683 ===================================== ====== ========================== 1684 ``ETHTOOL_A_PSE_HEADER`` nested request header 1685 ===================================== ====== ========================== 1686 1687Kernel response contents: 1688 1689 ====================================== ====== ============================= 1690 ``ETHTOOL_A_PSE_HEADER`` nested reply header 1691 ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` u32 Operational state of the PoDL 1692 PSE functions 1693 ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the 1694 PoDL PSE. 1695 ====================================== ====== ============================= 1696 1697When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies 1698the operational state of the PoDL PSE functions. The operational state of the 1699PSE function can be changed using the ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` 1700action. This option is corresponding to ``IEEE 802.3-2018`` 30.15.1.1.2 1701aPoDLPSEAdminState. Possible values are: 1702 1703.. kernel-doc:: include/uapi/linux/ethtool.h 1704 :identifiers: ethtool_podl_pse_admin_state 1705 1706When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies 1707the power detection status of the PoDL PSE. The status depend on internal PSE 1708state machine and automatic PD classification support. This option is 1709corresponding to ``IEEE 802.3-2018`` 30.15.1.1.3 aPoDLPSEPowerDetectionStatus. 1710Possible values are: 1711 1712.. kernel-doc:: include/uapi/linux/ethtool.h 1713 :identifiers: ethtool_podl_pse_pw_d_status 1714 1715PSE_SET 1716======= 1717 1718Sets PSE parameters. 1719 1720Request contents: 1721 1722 ====================================== ====== ============================= 1723 ``ETHTOOL_A_PSE_HEADER`` nested request header 1724 ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` u32 Control PoDL PSE Admin state 1725 ====================================== ====== ============================= 1726 1727When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used 1728to control PoDL PSE Admin functions. This option is implementing 1729``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See 1730``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values. 1731 1732RSS_GET 1733======= 1734 1735Get indirection table, hash key and hash function info associated with a 1736RSS context of an interface similar to ``ETHTOOL_GRSSH`` ioctl request. 1737 1738Request contents: 1739 1740===================================== ====== ========================== 1741 ``ETHTOOL_A_RSS_HEADER`` nested request header 1742 ``ETHTOOL_A_RSS_CONTEXT`` u32 context number 1743===================================== ====== ========================== 1744 1745Kernel response contents: 1746 1747===================================== ====== ========================== 1748 ``ETHTOOL_A_RSS_HEADER`` nested reply header 1749 ``ETHTOOL_A_RSS_HFUNC`` u32 RSS hash func 1750 ``ETHTOOL_A_RSS_INDIR`` binary Indir table bytes 1751 ``ETHTOOL_A_RSS_HKEY`` binary Hash key bytes 1752===================================== ====== ========================== 1753 1754ETHTOOL_A_RSS_HFUNC attribute is bitmap indicating the hash function 1755being used. Current supported options are toeplitz, xor or crc32. 1756ETHTOOL_A_RSS_INDIR attribute returns RSS indrection table where each byte 1757indicates queue number. 1758 1759PLCA_GET_CFG 1760============ 1761 1762Gets the IEEE 802.3cg-2019 Clause 148 Physical Layer Collision Avoidance 1763(PLCA) Reconciliation Sublayer (RS) attributes. 1764 1765Request contents: 1766 1767 ===================================== ====== ========================== 1768 ``ETHTOOL_A_PLCA_HEADER`` nested request header 1769 ===================================== ====== ========================== 1770 1771Kernel response contents: 1772 1773 ====================================== ====== ============================= 1774 ``ETHTOOL_A_PLCA_HEADER`` nested reply header 1775 ``ETHTOOL_A_PLCA_VERSION`` u16 Supported PLCA management 1776 interface standard/version 1777 ``ETHTOOL_A_PLCA_ENABLED`` u8 PLCA Admin State 1778 ``ETHTOOL_A_PLCA_NODE_ID`` u32 PLCA unique local node ID 1779 ``ETHTOOL_A_PLCA_NODE_CNT`` u32 Number of PLCA nodes on the 1780 network, including the 1781 coordinator 1782 ``ETHTOOL_A_PLCA_TO_TMR`` u32 Transmit Opportunity Timer 1783 value in bit-times (BT) 1784 ``ETHTOOL_A_PLCA_BURST_CNT`` u32 Number of additional packets 1785 the node is allowed to send 1786 within a single TO 1787 ``ETHTOOL_A_PLCA_BURST_TMR`` u32 Time to wait for the MAC to 1788 transmit a new frame before 1789 terminating the burst 1790 ====================================== ====== ============================= 1791 1792When set, the optional ``ETHTOOL_A_PLCA_VERSION`` attribute indicates which 1793standard and version the PLCA management interface complies to. When not set, 1794the interface is vendor-specific and (possibly) supplied by the driver. 1795The OPEN Alliance SIG specifies a standard register map for 10BASE-T1S PHYs 1796embedding the PLCA Reconcialiation Sublayer. See "10BASE-T1S PLCA Management 1797Registers" at https://www.opensig.org/about/specifications/. 1798 1799When set, the optional ``ETHTOOL_A_PLCA_ENABLED`` attribute indicates the 1800administrative state of the PLCA RS. When not set, the node operates in "plain" 1801CSMA/CD mode. This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.1 1802aPLCAAdminState / 30.16.1.2.1 acPLCAAdminControl. 1803 1804When set, the optional ``ETHTOOL_A_PLCA_NODE_ID`` attribute indicates the 1805configured local node ID of the PHY. This ID determines which transmit 1806opportunity (TO) is reserved for the node to transmit into. This option is 1807corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.4 aPLCALocalNodeID. The valid 1808range for this attribute is [0 .. 255] where 255 means "not configured". 1809 1810When set, the optional ``ETHTOOL_A_PLCA_NODE_CNT`` attribute indicates the 1811configured maximum number of PLCA nodes on the mixing-segment. This number 1812determines the total number of transmit opportunities generated during a 1813PLCA cycle. This attribute is relevant only for the PLCA coordinator, which is 1814the node with aPLCALocalNodeID set to 0. Follower nodes ignore this setting. 1815This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.3 1816aPLCANodeCount. The valid range for this attribute is [1 .. 255]. 1817 1818When set, the optional ``ETHTOOL_A_PLCA_TO_TMR`` attribute indicates the 1819configured value of the transmit opportunity timer in bit-times. This value 1820must be set equal across all nodes sharing the medium for PLCA to work 1821correctly. This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.5 1822aPLCATransmitOpportunityTimer. The valid range for this attribute is 1823[0 .. 255]. 1824 1825When set, the optional ``ETHTOOL_A_PLCA_BURST_CNT`` attribute indicates the 1826configured number of extra packets that the node is allowed to send during a 1827single transmit opportunity. By default, this attribute is 0, meaning that 1828the node can only send a single frame per TO. When greater than 0, the PLCA RS 1829keeps the TO after any transmission, waiting for the MAC to send a new frame 1830for up to aPLCABurstTimer BTs. This can only happen a number of times per PLCA 1831cycle up to the value of this parameter. After that, the burst is over and the 1832normal counting of TOs resumes. This option is corresponding to 1833``IEEE 802.3cg-2019`` 30.16.1.1.6 aPLCAMaxBurstCount. The valid range for this 1834attribute is [0 .. 255]. 1835 1836When set, the optional ``ETHTOOL_A_PLCA_BURST_TMR`` attribute indicates how 1837many bit-times the PLCA RS waits for the MAC to initiate a new transmission 1838when aPLCAMaxBurstCount is greater than 0. If the MAC fails to send a new 1839frame within this time, the burst ends and the counting of TOs resumes. 1840Otherwise, the new frame is sent as part of the current burst. This option 1841is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.7 aPLCABurstTimer. The 1842valid range for this attribute is [0 .. 255]. Although, the value should be 1843set greater than the Inter-Frame-Gap (IFG) time of the MAC (plus some margin) 1844for PLCA burst mode to work as intended. 1845 1846PLCA_SET_CFG 1847============ 1848 1849Sets PLCA RS parameters. 1850 1851Request contents: 1852 1853 ====================================== ====== ============================= 1854 ``ETHTOOL_A_PLCA_HEADER`` nested request header 1855 ``ETHTOOL_A_PLCA_ENABLED`` u8 PLCA Admin State 1856 ``ETHTOOL_A_PLCA_NODE_ID`` u8 PLCA unique local node ID 1857 ``ETHTOOL_A_PLCA_NODE_CNT`` u8 Number of PLCA nodes on the 1858 netkork, including the 1859 coordinator 1860 ``ETHTOOL_A_PLCA_TO_TMR`` u8 Transmit Opportunity Timer 1861 value in bit-times (BT) 1862 ``ETHTOOL_A_PLCA_BURST_CNT`` u8 Number of additional packets 1863 the node is allowed to send 1864 within a single TO 1865 ``ETHTOOL_A_PLCA_BURST_TMR`` u8 Time to wait for the MAC to 1866 transmit a new frame before 1867 terminating the burst 1868 ====================================== ====== ============================= 1869 1870For a description of each attribute, see ``PLCA_GET_CFG``. 1871 1872PLCA_GET_STATUS 1873=============== 1874 1875Gets PLCA RS status information. 1876 1877Request contents: 1878 1879 ===================================== ====== ========================== 1880 ``ETHTOOL_A_PLCA_HEADER`` nested request header 1881 ===================================== ====== ========================== 1882 1883Kernel response contents: 1884 1885 ====================================== ====== ============================= 1886 ``ETHTOOL_A_PLCA_HEADER`` nested reply header 1887 ``ETHTOOL_A_PLCA_STATUS`` u8 PLCA RS operational status 1888 ====================================== ====== ============================= 1889 1890When set, the ``ETHTOOL_A_PLCA_STATUS`` attribute indicates whether the node is 1891detecting the presence of the BEACON on the network. This flag is 1892corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.2 aPLCAStatus. 1893 1894MM_GET 1895====== 1896 1897Retrieve 802.3 MAC Merge parameters. 1898 1899Request contents: 1900 1901 ==================================== ====== ========================== 1902 ``ETHTOOL_A_MM_HEADER`` nested request header 1903 ==================================== ====== ========================== 1904 1905Kernel response contents: 1906 1907 ================================= ====== =================================== 1908 ``ETHTOOL_A_MM_HEADER`` nested request header 1909 ``ETHTOOL_A_MM_PMAC_ENABLED`` bool set if RX of preemptible and SMD-V 1910 frames is enabled 1911 ``ETHTOOL_A_MM_TX_ENABLED`` bool set if TX of preemptible frames is 1912 administratively enabled (might be 1913 inactive if verification failed) 1914 ``ETHTOOL_A_MM_TX_ACTIVE`` bool set if TX of preemptible frames is 1915 operationally enabled 1916 ``ETHTOOL_A_MM_TX_MIN_FRAG_SIZE`` u32 minimum size of transmitted 1917 non-final fragments, in octets 1918 ``ETHTOOL_A_MM_RX_MIN_FRAG_SIZE`` u32 minimum size of received non-final 1919 fragments, in octets 1920 ``ETHTOOL_A_MM_VERIFY_ENABLED`` bool set if TX of SMD-V frames is 1921 administratively enabled 1922 ``ETHTOOL_A_MM_VERIFY_STATUS`` u8 state of the verification function 1923 ``ETHTOOL_A_MM_VERIFY_TIME`` u32 delay between verification attempts 1924 ``ETHTOOL_A_MM_MAX_VERIFY_TIME``` u32 maximum verification interval 1925 supported by device 1926 ``ETHTOOL_A_MM_STATS`` nested IEEE 802.3-2018 subclause 30.14.1 1927 oMACMergeEntity statistics counters 1928 ================================= ====== =================================== 1929 1930The attributes are populated by the device driver through the following 1931structure: 1932 1933.. kernel-doc:: include/linux/ethtool.h 1934 :identifiers: ethtool_mm_state 1935 1936The ``ETHTOOL_A_MM_VERIFY_STATUS`` will report one of the values from 1937 1938.. kernel-doc:: include/uapi/linux/ethtool.h 1939 :identifiers: ethtool_mm_verify_status 1940 1941If ``ETHTOOL_A_MM_VERIFY_ENABLED`` was passed as false in the ``MM_SET`` 1942command, ``ETHTOOL_A_MM_VERIFY_STATUS`` will report either 1943``ETHTOOL_MM_VERIFY_STATUS_INITIAL`` or ``ETHTOOL_MM_VERIFY_STATUS_DISABLED``, 1944otherwise it should report one of the other states. 1945 1946It is recommended that drivers start with the pMAC disabled, and enable it upon 1947user space request. It is also recommended that user space does not depend upon 1948the default values from ``ETHTOOL_MSG_MM_GET`` requests. 1949 1950``ETHTOOL_A_MM_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set in 1951``ETHTOOL_A_HEADER_FLAGS``. The attribute will be empty if driver did not 1952report any statistics. Drivers fill in the statistics in the following 1953structure: 1954 1955.. kernel-doc:: include/linux/ethtool.h 1956 :identifiers: ethtool_mm_stats 1957 1958MM_SET 1959====== 1960 1961Modifies the configuration of the 802.3 MAC Merge layer. 1962 1963Request contents: 1964 1965 ================================= ====== ========================== 1966 ``ETHTOOL_A_MM_VERIFY_TIME`` u32 see MM_GET description 1967 ``ETHTOOL_A_MM_VERIFY_ENABLED`` bool see MM_GET description 1968 ``ETHTOOL_A_MM_TX_ENABLED`` bool see MM_GET description 1969 ``ETHTOOL_A_MM_PMAC_ENABLED`` bool see MM_GET description 1970 ``ETHTOOL_A_MM_TX_MIN_FRAG_SIZE`` u32 see MM_GET description 1971 ================================= ====== ========================== 1972 1973The attributes are propagated to the driver through the following structure: 1974 1975.. kernel-doc:: include/linux/ethtool.h 1976 :identifiers: ethtool_mm_cfg 1977 1978Request translation 1979=================== 1980 1981The following table maps ioctl commands to netlink commands providing their 1982functionality. Entries with "n/a" in right column are commands which do not 1983have their netlink replacement yet. Entries which "n/a" in the left column 1984are netlink only. 1985 1986 =================================== ===================================== 1987 ioctl command netlink command 1988 =================================== ===================================== 1989 ``ETHTOOL_GSET`` ``ETHTOOL_MSG_LINKINFO_GET`` 1990 ``ETHTOOL_MSG_LINKMODES_GET`` 1991 ``ETHTOOL_SSET`` ``ETHTOOL_MSG_LINKINFO_SET`` 1992 ``ETHTOOL_MSG_LINKMODES_SET`` 1993 ``ETHTOOL_GDRVINFO`` n/a 1994 ``ETHTOOL_GREGS`` n/a 1995 ``ETHTOOL_GWOL`` ``ETHTOOL_MSG_WOL_GET`` 1996 ``ETHTOOL_SWOL`` ``ETHTOOL_MSG_WOL_SET`` 1997 ``ETHTOOL_GMSGLVL`` ``ETHTOOL_MSG_DEBUG_GET`` 1998 ``ETHTOOL_SMSGLVL`` ``ETHTOOL_MSG_DEBUG_SET`` 1999 ``ETHTOOL_NWAY_RST`` n/a 2000 ``ETHTOOL_GLINK`` ``ETHTOOL_MSG_LINKSTATE_GET`` 2001 ``ETHTOOL_GEEPROM`` n/a 2002 ``ETHTOOL_SEEPROM`` n/a 2003 ``ETHTOOL_GCOALESCE`` ``ETHTOOL_MSG_COALESCE_GET`` 2004 ``ETHTOOL_SCOALESCE`` ``ETHTOOL_MSG_COALESCE_SET`` 2005 ``ETHTOOL_GRINGPARAM`` ``ETHTOOL_MSG_RINGS_GET`` 2006 ``ETHTOOL_SRINGPARAM`` ``ETHTOOL_MSG_RINGS_SET`` 2007 ``ETHTOOL_GPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_GET`` 2008 ``ETHTOOL_SPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_SET`` 2009 ``ETHTOOL_GRXCSUM`` ``ETHTOOL_MSG_FEATURES_GET`` 2010 ``ETHTOOL_SRXCSUM`` ``ETHTOOL_MSG_FEATURES_SET`` 2011 ``ETHTOOL_GTXCSUM`` ``ETHTOOL_MSG_FEATURES_GET`` 2012 ``ETHTOOL_STXCSUM`` ``ETHTOOL_MSG_FEATURES_SET`` 2013 ``ETHTOOL_GSG`` ``ETHTOOL_MSG_FEATURES_GET`` 2014 ``ETHTOOL_SSG`` ``ETHTOOL_MSG_FEATURES_SET`` 2015 ``ETHTOOL_TEST`` n/a 2016 ``ETHTOOL_GSTRINGS`` ``ETHTOOL_MSG_STRSET_GET`` 2017 ``ETHTOOL_PHYS_ID`` n/a 2018 ``ETHTOOL_GSTATS`` n/a 2019 ``ETHTOOL_GTSO`` ``ETHTOOL_MSG_FEATURES_GET`` 2020 ``ETHTOOL_STSO`` ``ETHTOOL_MSG_FEATURES_SET`` 2021 ``ETHTOOL_GPERMADDR`` rtnetlink ``RTM_GETLINK`` 2022 ``ETHTOOL_GUFO`` ``ETHTOOL_MSG_FEATURES_GET`` 2023 ``ETHTOOL_SUFO`` ``ETHTOOL_MSG_FEATURES_SET`` 2024 ``ETHTOOL_GGSO`` ``ETHTOOL_MSG_FEATURES_GET`` 2025 ``ETHTOOL_SGSO`` ``ETHTOOL_MSG_FEATURES_SET`` 2026 ``ETHTOOL_GFLAGS`` ``ETHTOOL_MSG_FEATURES_GET`` 2027 ``ETHTOOL_SFLAGS`` ``ETHTOOL_MSG_FEATURES_SET`` 2028 ``ETHTOOL_GPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_GET`` 2029 ``ETHTOOL_SPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_SET`` 2030 ``ETHTOOL_GRXFH`` n/a 2031 ``ETHTOOL_SRXFH`` n/a 2032 ``ETHTOOL_GGRO`` ``ETHTOOL_MSG_FEATURES_GET`` 2033 ``ETHTOOL_SGRO`` ``ETHTOOL_MSG_FEATURES_SET`` 2034 ``ETHTOOL_GRXRINGS`` n/a 2035 ``ETHTOOL_GRXCLSRLCNT`` n/a 2036 ``ETHTOOL_GRXCLSRULE`` n/a 2037 ``ETHTOOL_GRXCLSRLALL`` n/a 2038 ``ETHTOOL_SRXCLSRLDEL`` n/a 2039 ``ETHTOOL_SRXCLSRLINS`` n/a 2040 ``ETHTOOL_FLASHDEV`` n/a 2041 ``ETHTOOL_RESET`` n/a 2042 ``ETHTOOL_SRXNTUPLE`` n/a 2043 ``ETHTOOL_GRXNTUPLE`` n/a 2044 ``ETHTOOL_GSSET_INFO`` ``ETHTOOL_MSG_STRSET_GET`` 2045 ``ETHTOOL_GRXFHINDIR`` n/a 2046 ``ETHTOOL_SRXFHINDIR`` n/a 2047 ``ETHTOOL_GFEATURES`` ``ETHTOOL_MSG_FEATURES_GET`` 2048 ``ETHTOOL_SFEATURES`` ``ETHTOOL_MSG_FEATURES_SET`` 2049 ``ETHTOOL_GCHANNELS`` ``ETHTOOL_MSG_CHANNELS_GET`` 2050 ``ETHTOOL_SCHANNELS`` ``ETHTOOL_MSG_CHANNELS_SET`` 2051 ``ETHTOOL_SET_DUMP`` n/a 2052 ``ETHTOOL_GET_DUMP_FLAG`` n/a 2053 ``ETHTOOL_GET_DUMP_DATA`` n/a 2054 ``ETHTOOL_GET_TS_INFO`` ``ETHTOOL_MSG_TSINFO_GET`` 2055 ``ETHTOOL_GMODULEINFO`` ``ETHTOOL_MSG_MODULE_EEPROM_GET`` 2056 ``ETHTOOL_GMODULEEEPROM`` ``ETHTOOL_MSG_MODULE_EEPROM_GET`` 2057 ``ETHTOOL_GEEE`` ``ETHTOOL_MSG_EEE_GET`` 2058 ``ETHTOOL_SEEE`` ``ETHTOOL_MSG_EEE_SET`` 2059 ``ETHTOOL_GRSSH`` ``ETHTOOL_MSG_RSS_GET`` 2060 ``ETHTOOL_SRSSH`` n/a 2061 ``ETHTOOL_GTUNABLE`` n/a 2062 ``ETHTOOL_STUNABLE`` n/a 2063 ``ETHTOOL_GPHYSTATS`` n/a 2064 ``ETHTOOL_PERQUEUE`` n/a 2065 ``ETHTOOL_GLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_GET`` 2066 ``ETHTOOL_MSG_LINKMODES_GET`` 2067 ``ETHTOOL_SLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_SET`` 2068 ``ETHTOOL_MSG_LINKMODES_SET`` 2069 ``ETHTOOL_PHY_GTUNABLE`` n/a 2070 ``ETHTOOL_PHY_STUNABLE`` n/a 2071 ``ETHTOOL_GFECPARAM`` ``ETHTOOL_MSG_FEC_GET`` 2072 ``ETHTOOL_SFECPARAM`` ``ETHTOOL_MSG_FEC_SET`` 2073 n/a ``ETHTOOL_MSG_CABLE_TEST_ACT`` 2074 n/a ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` 2075 n/a ``ETHTOOL_MSG_TUNNEL_INFO_GET`` 2076 n/a ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` 2077 n/a ``ETHTOOL_MSG_MODULE_GET`` 2078 n/a ``ETHTOOL_MSG_MODULE_SET`` 2079 n/a ``ETHTOOL_MSG_PLCA_GET_CFG`` 2080 n/a ``ETHTOOL_MSG_PLCA_SET_CFG`` 2081 n/a ``ETHTOOL_MSG_PLCA_GET_STATUS`` 2082 n/a ``ETHTOOL_MSG_MM_GET`` 2083 n/a ``ETHTOOL_MSG_MM_SET`` 2084 =================================== ===================================== 2085